Copy from 1 table to anaother

Hi
it very urgent
I have more than 1 million records in 1 table
and i need to copy all data from that table to anaother table .
So how should i do it ??
if i use internal table it comes to short dump.
Please help
Praff

Hi there,
If you are talking using ABAP.
don't use internal table. Just simple use
select * from table
insert table content into another table.
endselect.
Or are you talking ODS table? If this is the case, using this table as source to load it into other new ODS
Hope this helps.
Weidong

Similar Messages

STO Delivery Date is not copy from Allocation Table Site Date

Hi,
I have a problem when Stock Transfer Order created based on the Allocation Table, the delivery date is not copy from Allocation Table. E.g. In Allocation Table delivery date is 26.09.2009, but in STO delivery date is 06.11.2009.
Check the configuration and also check the stock, there is stock available to be delivered on 26.09.2009.
Can someone please give me a hint to find out what is missing or wrong, and how to fixed this?
Greatly appreciate for your suggestion and sharing.
Kind Regards,
2tea

I found the problem finally.

Importing data from an old backup AppSet (copying from FactFinance tables)

Hello - we made a mistake a few weeks ago that wiped out some of our old data. Without realizing the implications, I made a base-level member of our DEPARTMENT dimension a parent, so BPC wiped out all the data for that base-level member. We know not to do that now, and we've changed the member back to base-level. But, our data is still gone.
But, our system automatically makes a backup every day, so we have the data saved. I am now trying to get the old data into our current AppSet. One of our DBA's queried the FactFinance table and found 30,000 records where the department = the one we accidentally erased. This sounded like the correct # of records, so I had him send me the data in a .csv file. I have now verified that all of the data is there in the backup. The DBA copied the records from the the FactFinance table to a test environment of our current AppSet. But, when I go in to look at it, very few records are there. For example, he says he copied 30,000 records, but I only see about 2,000 when I query the AppSet. If it matters, the records that we see only relate to the last three fiscal years, and none of the older data is there.
Can someone tell me how we can get all of these records to appear in our AppSet by copying them to the tables? Or, is there a way to import the data using the Data Manager? I tried saving the records as a .txt file and importing them, but that did not work, probably due to my lack of knowledge of how to manipulate transformation files. Although the file did validate with a transformation file, when I went to import it, it said "Convert Data: Success", but then said "The number of failing rows exceeds the maximum specified".

If you did a backup of your appset then you will be ablle to recuperate all data for that member of dimension.
1. First extract the data from backup from follow tables:
tblfact"yourapplication"
tblfac2"yourapplication"
tblfactwb"yourapplication".
2. Make sure your member is right now base member into your application
3. Delete all the existing records for Department member for all three table
fact,fac2, wb of your current database. By the way if this dimension is share then you will have this problem in all application not just in one.
4. Copy extracted records into tblfac2"yourapplication"
5. Process from SSAS fac2 partition of your application.
After that you should be able to see all data except the data inserted after your change from base member to parent.
Kind Regards
Sorin Radulescu

Copy from staging table to multiple tables

We are using an SSIS package to fast load our data source into a staging table for processing.
The reason we are using a staging table is that we need to copy the data from staging to our actual DB tables (4 in total), and the insertion order matters as we have foreign key relationships.
When copying the data from our staging table, should we enumerate through all the records and use an insert-select method for each row or is there a more efficient way to do this?

Our raw data source is a mdb file and we are using SSIS to fast load into SQL Server, and we are looking to transform the data set into 3 tables (using a stored proc):
Site (SiteID, Name)
Gas (ID, Date, Time, GasFIeld1, GasField2....., SiteID)
GenSet (ID, Date, Time, GenSetField1, GenSetField2.....,
SiteID)
Each record in our raw data source contains a Name field which identifies the Site. We only need to add a new site to the Site table if it does not already exist. This is already coded and working using insert-select and NOT EXISTS.
We now need to iterate over all records and extract a subset of data for the Gas table and extract a subset of data for the GenSet table and link each row with the
associated SiteID, using Name field.
The insertion order should be Site table first then remaining tables.
Are you saying it would be better to transform this data using SSIS and not to use a staging table and stored procedure?
I would prefer using staging + sp appproach here as that would involve set based logic and would be faster performance wise
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Not able to select and copy from adf table in IE and chrome if we enable row selection

Hi All,
We have an adf table and user wants to select and copy table cell values.
We enabled row selection on adf table. Ifrow selection is in place, IE and Chrome are not allowing user to select and copy data. But Firefox is allowing.
Do we have any solution to this? For our customer IE is the standard browser and they do test app on IE.
Regards
PavanKumar

Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar

How to increase Array size while copying from remote table

Hi everyone,
I am using remote copy to copy 900,000(9 millions) records to local data base ,but it is taking long time obviuosly. The message i see while copying is
Array fetch/bind size is 15 (array size is 15)
can Array size be changed to make copy faster or
any otherway to copy 9 million reocrds fastly?
regards,
Karna

I guess that you are using the 'copy' command in sql*plus.
1. You could export the remote table and import the data into your local table. That perhaps would be efficient.
2. You could increase the array size for example,
SQL> show arraysize
arraysize 15
SQL> set arraysize 5000
SQL> show arraysize
arraysize 5000
SQL> What is the value for sql*plus option 'copycommit'?
SQL> show copycommit
copycommit 0
SQL>

Copy from Fact: "Invalid selection passed"

Using OS5.0 SP2, has anyone received this error while running a standard copy from fact table package---"invalid selection passed"? Odd thing is, the copy package will work with the exact same parameters.
I didn't find anything about this in the sap notes.

Can you list out the source and destination settings you're using? I cannot remember the last time I ran that particular package but can try and run it with similar setting in apshell.

Copying large amount of data from one table to another getting slower

I have a process that copies data from one table (big_tbl) into a very big archive table (vb_archive_tbl - 30 mil recs - partitioned table). If there are less than 1 million records in the big_tbl the copy to the vb_archive_table is fast (-10 min), but more importantly - it's consistant. However, if the number of records is greater than 1 million records in the big_tbl copying the data into the vb_archive_tbl is very slow (+30 min - 4 hours), and very inconsistant. Every few days the time it takes to copy the same amount of data grows signicantly.
Here's an example of the code I'm using, which uses BULK COLLECT and FORALL INSERST to copy the data.
I occasionally change 'LIMIT 5000' to see performance differences.
DECLARE
TYPE t_rec_type IS RECORD (fact_id NUMBER(12,0),
store_id VARCHAR2(10),
product_id VARCHAR2(20));
TYPE CFF_TYPE IS TABLE OF t_rec_type
INDEX BY BINARY_INTEGER;
T_CFF CFF_TYPE;
CURSOR c_cff IS SELECT *
FROM big_tbl;
BEGIN
OPEN c_cff;
LOOP
FETCH c_cff BULK COLLECT INTO T_CFF LIMIT 5000;
FORALL i IN T_CFF.first..T_CFF.last
INSERT INTO vb_archive_tbl
VALUES T_CFF(i);
COMMIT;
EXIT WHEN c_cff%NOTFOUND;
END LOOP;
CLOSE c_cff;
END;
Thanks you very much for any advice
Edited by: reid on Sep 11, 2008 5:23 PM

Assuming that there is nothing else in the code that forces you to use PL/SQL for processing, I'll second Tubby's comment that this would be better done in SQL. Depending on the logic and partitioning approach for the archive table, you may be better off doing a direct-path load into a staging table and then doing a partition exchange to load the staging table into the partitioned table. Ideally, you could just move big_tbl into the vb_archive_tbl with a single partition exchange operation.
That said, if there is a need for PL/SQL, have you traced the session to see what is causing the slowness? Is the query plan different? If the number of rows in the table is really a trigger, I would tend to suspect that the number of rows is causing the optimizer to choose a different plan (with your sample code, the plan is obvious, but perhaps you omitted some where clauses to simplify things down) which may be rather poor.
Justin

Copying data from one table to another, but not duplicate

Good afternoon!
I am new to Oracle SQL, I have a difficulty.
I have a script that copies or add another table with data from another table.
If the table already has 01 "Registry 01" when you make a copy of the data in table 02, can not duplicate the "Registry 01" again.
As the table already exists since the beginning of the year before last and duplicate information, I can not apply the UNIQUE constraint because of the error. I have to make this change from now.
How to perform this validation so that no duplicate data?
DECLARE
w_cont NUMBER;
CURSOR c_simpro IS
SELECT sc.cd_simpro,
sc.ds_produto,
sp.qt_embalagem,
MAX(sp.dt_vigencia)
FROM simpro_cadastro sc,
simpro_preco sp
WHERE sc.cd_simpro = sp.cd_simpro
GROUP BY sc.cd_simpro,
sc.ds_produto,
sp.qt_embalagem;
BEGIN
FOR r_simpro IN c_simpro LOOP
w_cont := 0;
SELECT COUNT(1)
INTO w_cont
FROM pls_material pm
WHERE pm.cd_material_ops = r_simpro.cd_simpro;
IF w_cont = 0 THEN
INSERT INTO pls_material(nr_sequencia,
dt_atualizacao,
nm_usuario,
dt_atualizacao_nrec,
nm_usuario_nrec,
ie_tipo_despesa,
cd_estabelecimento,
nr_seq_estrut_mat,
cd_simpro,
ds_material,
ie_situacao,
ds_material_sem_acento,
dt_inclusao,
cd_material_ops_orig,
cd_unidade_medida,
cd_material_ops,
qt_conversao_simpro)
VALUES(pls_material_seq.nextval,
SYSDATE,
'ES-SIMPRO',
SYSDATE,
'ES-SIMPRO',
3,
1,
3,
r_simpro.cd_simpro,
r_simpro.ds_PRODUTO,
'A',
r_simpro.ds_PRODUTO,
SYSDATE,
r_simpro.cd_simpro,
'un',
TRIM(to_char(r_simpro.cd_simpro,'0000099999')),
r_simpro.qt_embalagem);
COMMIT;
END IF;
IF w_cont > 0 THEN
UPDATE pls_material p
SET p.qt_conversao_simpro = r_simpro.qt_embalagem,
p.dt_atualizacao = SYSDATE
WHERE p.cd_simpro = r_simpro.cd_simpro;
COMMIT;
END IF;
END LOOP;
END;
Edited by: 983464 on 22/01/2013 10:30

Hi,
in addition to what Marwin has already said, I suggest you to post CREATE TABLE and INSERT statements (as mentioned in the FAQ).
The error you are getting from MERGE command is because you need a way to uniquely identify within the table. So it's is important to know also if your table has a primary key/unique index so the keys could to be used in the MERGE command.
Additionally when you put some code or output please enclose it between two lines starting with {noformat}{noformat}
i.e.:
{noformat}{noformat}
SELECT ...
{noformat}{noformat}
Regards.
Al

Copy selected values from a table control into another table control

hi there,
as seen in the subject i need to copy selected values from a table control into another table control in the same screen. as i dont know much about table controls i made 2 table controls with the wizard and started to change the code... right now im totally messed up. nothing works anymore and i don't know where to start over.
i looked up the forums and google, but there is nothing to help me with this problem (or i suck in searching the internet for solutions)
i have 2 buttons. one to push the selected data from the top table control into the bottom tc and the other button is to push selected data from the bottom tc into the top tc. does somebody has a sample code to do this?

you're funny
i still don't get it... can't believe, there is no tutorial or sample code around how to copy multiple selected rows from a tc.
here's my code, maybe you can tell me exactly were i have to change it:
tc1 = upper table control
tc2 = lower table control
SCREEN 0100:
PROCESS BEFORE OUTPUT.
MODULE status_0100.
MODULE get_nfo. --> gets data from the dictionary table
MODULE tc1_change_tc_attr.
LOOP AT   it_roles_tc1
       INTO wa_roles_tc1
       WITH CONTROL tc1
       CURSOR tc1-current_line.
ENDLOOP.
MODULE tc2_change_tc_attr.
LOOP AT   it_roles_tc2
       INTO wa_roles_tc2l
       WITH CONTROL tc2
       CURSOR tc2-current_line.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT it_roles_tc1.
    CHAIN.
      FIELD wa_roles_tc1-agr_name.
      FIELD wa_roles_tc1-text.
    ENDCHAIN.
    FIELD wa_roles_tc1-mark
      MODULE tc1_mark ON REQUEST.
ENDLOOP.
LOOP AT it_roles_tc2.
    CHAIN.
      FIELD wa_roles_tc2-agr_name.
      FIELD wa_roles_tc2-text.
    ENDCHAIN.
    FIELD wa_roles_tc2-mark
      MODULE tc2_mark ON REQUEST.
ENDLOOP.
MODULE ok_code.
MODULE user_command_0100.
INCLUDE PAI:
MODULE tc1_mark INPUT.
IF tc1-line_sel_mode = 2
AND wa_roles_tc1-mark = 'X'.
    LOOP AT it_roles_tc1 INTO g_tc1_wa2
      WHERE mark = 'X'.    -
> big problem here is, that no entry has an 'X' there
      g_tc1_wa2-mark = ''.
      MODIFY it_roles_tc1
        FROM g_tc1_wa2
        TRANSPORTING mark.
    ENDLOOP.
ENDIF.
MODIFY it_roles_tc1
    FROM wa_roles_tc1
    INDEX tc1-current_line
    TRANSPORTING mark.
ENDMODULE.                    "TC1_MARK INPUT
MODULE tc2_mark INPUT.
IF tc2-line_sel_mode = 2
AND wa_roles_tc2-mark = 'X'.
    LOOP AT it_roles_tc2 INTO g_tc2_wa2
      WHERE mark = 'X'.             -
> same here, it doesn't gets any data
      g_tc2_wa2-mark = ''.
      MODIFY it_roles_tc2
        FROM g_tc2_wa2
        TRANSPORTING mark.
    ENDLOOP.
ENDIF.
MODIFY it_roles_tc2
    FROM wa_roles_tc2
    INDEX tc2-current_line
    TRANSPORTING mark.
ENDMODULE.
thx for anybody who can help with this!

Download doc problem when copied from APEX_APPLICATION_FILES to local table

Good morning!
As the subject indicatesm, I am experiencing problems downloading a document I have copied from APEX_APPLICATION_FILES to my local table FILE_SUBJECTS
and would be very grateful if someone could help.
Here is the problem:
I can successfully upload a document into APEX_APPLICATION_FILES and dowload it from there too.
I can copy the record from APEX_APPLICATION_FILES into my local table FILE_SUBJECTS and delete that entry from APEX_APPLICATION_FILES but I cannot download it from my local table, it keeps pointing me to a page which cannot be found, so I'm guessing there is something wrong with either, my INSERT INTO statement or, my link in the report.
My INSERT INTO statement is:
INSERT INTO file_subjects (id,filename,updated_by,updated_on,blob_content,mime_type)
SELECT id, filename, name, updated_by, updated_on,blob_content,mime_type
FROM APEX_APPLICATION_FILES
WHERE APEX_APPLICATION_FILES.filename = :P2_FILE_NAME;
REPORT LINK
I have tried just a normal column link in my report like: #ID# (this works when looking at APEX_APPLICATION_FILES)
but I have also tried the following:
#OWNER#.DOWNLOAD_MY_FILE?p_file=#ID#
where download_my_file is a procedure:
create or replace PROCEDURE "DOWNLOAD_MY_FILE" (p_file in number) AS
v_mime VARCHAR2(48);
v_length NUMBER;
v_file_name VARCHAR2(2000);
Lob_loc BLOB;
BEGIN
--apex_application.g_flow_id := 166;
--if not(APEX_CUSTOM_AUTH.IS_SESSION_VALID) then
-- owa_util.status_line(404, 'Page Not Found', true);
-- return;
--end if;
SELECT MIME_TYPE, BLOB_CONTENT, name,DBMS_LOB.GETLENGTH(blob_content)
INTO v_mime,lob_loc,v_file_name,v_length
FROM FILE_SUBJECTS
WHERE id = p_file;
-- set up HTTP header
-- use an NVL around the mime type and
-- if it is a null set it to application/octect
-- application/octect may launch a download window from windows
owa_util.mime_header( nvl(v_mime,'application/octet'), FALSE );
-- set the size so the browser knows how much to download
htp.p('Content-length: ' || v_length);
-- the filename will be used by the browser if the users does a save as
htp.p('Content-Disposition: attachment; filename="'||replace(replace(substr(v_file_name,instr(v_file_name,'/')+1),chr(10),null),chr(13),null)|| '"');
-- close the headers
owa_util.http_header_close;
-- download the BLOB
wpg_docload.download_file( Lob_loc );
end DOWNLOAD_MY_FILE;
Many thanks in advance!
Sue

Sue,
If you are running XE or running with the EPG versus the http server, you need to grant access to the procedure you are using for it to be run properly..
You may need to look at this function, if you are using XE or have the EPG setup for your database.. http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e12856/adm_wrkspc.htm#BABEFDHI [Look for the section called *Restricting Access to Oracle Application Express by Database Access Descriptor (DAD)*]
Thank you,
Tony Miller
Webster, TX

How to copy file from one table to another table at another database

I need to transfer my tables from one workspace and schema to another workspace and schema. Basically I need to create again all the tables at this new schema. How could I transfer data from tha table at old schema to the table at new schema when this table has files stored in it? (data type is blob)
thank you so much,
Silver

Hello Silver,
Depending which database you're using (if it's available) I would recommend to use datapump.
Datapump allows you to copy an entire schema to another database, it's the "new" export/import you might now.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/
REWARDS: Please remember to mark helpful or correct posts on the forum

How to copy data from one table to another (in other database)

Hi. I would like to copy all rows from one table to another (and not use BC4J). Tables can be in various databases. I have already 2 connections and I am able to browse source table using
ResultSet rset = stmt.executeQuery("select ...");
But I would not like to create special insert statement for every row . There will be problems with date formats etc and it will be slow. Can I use retrieved ResultSet somehow ? Maybe with method insertRow, but how, if ResultSet is based on select statement and want to insert into target table? Please point me in the right direction. Thanks.

No tools please, it must be common solution. We suceeded in converting our BC4J aplication to PostgreSQL, the MSSQL will be next. So we want to write simple aplication, which could transfer data from our tables between these 3 servers.

Copying data from one table to another table thru java

Hi
I have to copy data from table emp in Database A to table emp in Database B. My input would be table name and number of rows to be fetched. these rows i need to insert in table B.
The problem over here is I won't be having any info. of table emp i.e the number of columns it has and their type.
So is their any way i can copy the data from one table to other without having the info abt the number of cols and their type.
TIA

Cross post - http://forum.java.sun.com/thread.jspa?threadID=5169293&messageID=9649839#9649839

Copying Data from a table to new table

Hi,
I am copying some columns data from one table to another table and my query is
INSERT INTO TestTable (empno, empName,deptno)
SELECT empno, empname,deptno
FROM emp
and it's working fine but I want to insert one more column data into testTable on the basis of emp.deptno
like if emp.deptno=10 it will add 1 to testtable.class column,
if emp.deptno=20 it will add 2 to testtable.class column,
if deptno=30 it will add 3 to testtable.class column,
structure of TestTable is
EMPNO NUMBER(20)
ENAME VARCHAR2(50)
DEPTNO NUMBER(20)
CLASS NUMBER(20)
Can anyone please help me to write this procedure.
Thanks

you can use case statement like
INSERT INTO TestTable (empno, empName,deptno,class_column )
SELECT empno, empname,deptno, case when emp.deptno=10 then 1
                                   when emp.deptno=20 then 2
                                   when emp.deptno=30 then 3
                              end
FROM empCheers
Nawneet

Copy from 1 table to anaother

Similar Messages

Maybe you are looking for