Copy & Paste into Esbase 7x console from Excel

Hi, I cannot copy and paste a set of members from excel back into the Outline editor on Essbase 7.1.5, not sure why. This feaute was available on Essbase 6x console. I cannot believe I'll have to do it one by one. Does enybody had experienced this issue before? Any work around? Thanks Osvaldo

I couldn't either from 6.5.4 to 7.1.2. However we were using EAS for 7.1.2. . I think it is because the information is displayed in EAS using an entirely different method [ when you copy a member from EAS you get all the data, under App Mgr you got the mbrs you highlighted, but ONLY the mbrs - not all the associated data] HTH

Similar Messages

Copy & Paste into Dialer - Cannot Edit Number!

I am curious as to why the supposed enhancement to enabling you to paste a number into the Dialer app does not allow you to edit the number once pasted. I do a lot of international calls and people send out email invites (especially US based people) and they send the number as 1 xxx xxx xxxx, omitting the + from the start, which international caller require.
In previous versions of the OS you could select the number as a link and it would ask you if you wanted to call the number. I had hoped that the cut & paste ability would allow you to paste the number and then edit it to insert the + sign.
As this is not available I do not see what the excitement is with cut & paste in the Dialer app.
These little things make all the difference in usability!

Clearly Apple's developer beta testers did not do enough research on copy past into the dialer pad for INT'L capabilities
Since they're in so many countries...I'm sure this will be an update soon to follow...
Apple is "rumored" to read the forums for high level observation ONLY...meaning they may check to see that they have 250 posts on bad battery life after an update...but NEVER reply to the poster...
In a few articles I've read on Appleinsider.com it is said that some posters actually got emailed at the email they listed in their user profile to answer a follow up question Apple had...this I'm sure is very RARE though and probably would only happen if a specific step or user action needed to be understood to duplicate an error or issue...

Problem with copy/paste into WYSIWYG field?

In using Robo HTML X5 my helpfile design is a simple one, but
one issue is stumping me.
-From the TOC tab I will create a new topic, and then edit
the WYSIWYG field on the right, insert graphics, etc. But if I cut
and paste from Word 2003 into the WYSIWYG topic field, all
formatting like bold letting is stripped out, along with graphics.
The graphics have to be cut and pasted individually and I manually
have to reformat the text.
Does anyone know why a copy/paste into the WYSIWYG field is
being stripped of formatting somehow? Is there simple project
setting somewhere?

Hi reiver12367 and welcome to our community
Trust me on this. Mixing Word and RoboHelp HTML are like
mixing oil and water. You really don't want to go down any road
where formatting is maintained during a copy/paste operation.
You might see better results by right clicking the folder
(inside RoboHelp HTML) where you want the topic to be, then
selecting Import. From there, choose the Word document file type
from the drop-down on the bottom of the dialog, navigate to and
choose your Word document. You will have a couple of dialogs to
deal with and the stuff should import in.
Personally, I even avoid going that route if I can. I instead
opt for saving the Word document as pure ASCII text. Then creating
a new topic and copy/pasting the text into the topic. From there I
format as needed.
Hopefully this helps... Rick

Copy paste into dock

If someone could please help Firstly im a complete novice I have had my mac for just over a year and great with no problems until now when i copy text from a webpage and drop it onto the safari icon in the dock it no longer works very frustrated and i have also a issue regarding my email which when i try to get mail nothing happens is it possible to remove my email account and then reinstate it back to its original condition as i have a feeling i have altered settings Iwould be very gratefull any help.

You can make the image a link. You can also select the image
and draw
areas on it to make an image map so that different parts of
the image go to
different links.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"senormejor" <[email protected]> wrote in
message
news:fa20sv$5ar$[email protected]..
>i know you can copy / paste into dreamweaver, my question
is are you able
>to
> create hyperlinks within the image from text on the
image or set certain
> regions within the image (such as images within the
image) to create
> hyperlinks
> or is it just simply an image pasted into the website?
>
> i had a hard time trying to explain my question, but
please ask any
> questions
> if i need to clarify more.
>
> thanks, im obviously a dw noob :>)
>

Finished sequences is wrong timebase, cant copy paste into new sequence

I am coming onto a project finishing it for a first time editor and he cut 23.97 footage in a 29.99 seq, there are many time effects etc. I tried copy/pasting into a new seq but everything ends up in different places. I cant change my seq settings as it is grayed out, this is outside the realm of my experience any advice would be much appreciated! Cheers.

Different timebase...OOOCHIE! This is what people get for not paying attention, and what happens with the OPEN TIMELINE being able to edit almost any format. People don't see the RENDER BAR and just carry on...ugh.
Nothing to do but to copy and paste into a correct timebase, and manually close all the gaps. *****, but what you need to do. Been there....cleaning up after an editor.
Shane

Trying to reset my password (which I have forgot) for elements 13 I have the serial no. But I can't find the right website to reset? I have "copy & paste " into the browser.

trying to reset my password (which I have forgot) for elements 13 I have the serial no. But I can't find the right website to reset? I have "copy & paste " into the browser.

Go to the main page of adobe.com and sign out if you're already signed in there. Then click Sign In at the upper right of the page. In the next page you will see a Forgot Password link:

Is it possible to copy photos into iPod-Touch(4Gen) from PC(Win7) ?

Is it possible to copy photos into iPod-Touch(4Gen) from PC(Win7) ?
Thks.

No, you use iTunes on either a PC or a Mac as the Apple article says in the link I supplied in my previous post.
rava99 wrote:
Thk you for the reply.
I assume that the "syncing" you're talking about is an iPhoto/Mac feature.
Unfortunately, I'm working on a PC(Windows7), and I can't find any of this in my PC iTunes.
Could you confirm ?
Thks in advance

Copy / Paste into Skype

In windows 7 you can copy/paste into skype no problem.
In windows 8 you can no longer copy/paste into skype.
This seems like moving backwards so I'm wondering if I'm doing something wrong.

Blaze1 wrote:
I was wondering if I can set my area code as a default when placing calls? Sounds trivial but I make a lot of business calls and like to copy/paste the number directly into Skype’s call box, most do not have the area code attached which is needed unless I can find a way of getting Skype to use a default area code. Skype needs all 10 numbers to complete the call, so I'm having to enter 916 each time I place a call.
*email address removed*
Thanks, Kevin
Since Skype is an international service, setting a default domestic area/city code is not possible. If you are regularly calling the same group of people, you could define them in the contacts list of your Skype program or phone app. When you do that, you could put in the international country code and area/city code before each number. If you are using a Skype app on a mobile phone (i.e., iPhones), you can also make use of the phone's contacts list - if they are set up with the international country code and area/city code for each number.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

When i paste some copied color text or formatted cells from excel to my mail draft while composing a mail, it is being pasted as plain text. No back groud or text colors are copied to it. Please suggest a possible solution for this issue.

Colors & Formatted Cells from Excel application can not be copied to my mail composer as it is. Only Plain text is copied.

Wish I could be king. But you described the problem perfectly and I am still but a pawn. All I can say is that I trashed the mail preferences (com.apple.mail.plist) on my Mac Mini, and now my MacBook seems to work right.
Sorry. :>) But that is the truth... The MacBook now has actually sometimes displayed pasted text in its actual, different, font and style as I paste it into a partially composed new mail message.
In other (more rational) words, the problem seems to be tied to pasting only certain types of text. I have not been able yet to pinpoint what. Yes, frustrating indeed. The only work-around has been to re-train my fingers to command-option-shift V, for "paste and match style" (like you, I do not want to always use only plain text). Maybe someone else will eventually weigh in with a real solution. The solution I want is just to be able to consistently see any font variations within my message before I send the email.
The info about the different ppi scales between Windows and Mac is interesting, although not relevant to this particular problem. It does explain the apparent overall size differences I have seen before.

Unable to copy-paste into a few fields in Safari

Hello, can anybody tell me why you cannot paste text copied from programs, such as Excel into some of the fields in Safari? Take this website as an example: http://www.banamex.com/estudiosfinanzas/finanzas/divisasmetales.htm
it is a currency converter. at the bottom right there is a field "Cantidad". You cannot paste anything in there, you have to type. If you open that same link in another browser, you will be able to paste into that field. Can anybody help? Thanks very much!

Hi Jorge
your example is the same for me in Safari & Firefox, neither allow pasting, but Camino does.
It's due to a javascript function deliberately set on that field to allow (validate) only certain numbers (no letters etc, only 2 decimal places) - disable javascript & it works more normally.
Presumably, Firefox & Safari present pasted data in a way that triggers the website javascript function to reject it, regardless of the correct content.

Explorer Hangs on Copy/Paste/Rename in Shared Folder From Client

Recently installed a Dell PowerEdge T110 II Server w/H200 hardware RAID controller and SAS drives, running Windows Server 2012 Essentials R2, along with new Dell OptiPlex 3020 clients running Windows 8.1 Pro. Have encountered a very strange issue. When
a user copies a folder (containing a small number of sub-folders and files) from the Company folder on the server, pastes it into another sub-folder, then renames it, Windows Explorer hangs for a few minutes. The problem happens from more than one of
the new PCs. It does not happen at the server console, nor does it occur when logged into the new PCs as the domain admin - it only happens when logged in as the users. The users have Full rights to the directory structure where the copy/paste/rename operation
is taking place. Hardware and software updates on all systems, PCs and the server, have been applied. Have used MSCONFIG to disable all non-essential items and create a clean-boot environment to no avail.

Hi SDJCS,
à
When a user copies a folder (containing a small number of sub-folders and files) from the Company folder on the server, pastes it into another sub-folder, then renames it,
Windows Explorer hangs for a few minutes.
Just a confirmation. If users copy folders from a local folder which host in the client computer, will encounter
the same issue? Would you please let me know whether install any antivirus software? Meanwhile, please check if you had installed
KB2911106.
Please run
sfc /scannow command to scan all protected system files. Any find?
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

Copy & Paste into Google Maps no longer works after 4.2 update

Anyone else seem to be getting this problem? Copy and paste into Google maps was extremely useful. Now this doesn't seem to work for me after updating to 4.2.

1. Copy something into the clipboard (doesn't matter what it is)
2. Open Google maps
3. Try to paste into the search bar. You don't get the paste option.
4. Try to type something into the search bar then attempt to copy what you just typed. No options appear to copy what was just typed in.
This used to work prior to the 4.2 update. Very useful when receiving incomplete addresses via text message or from a web page.

Why won't copy/paste images appear in PDF (from Word 2007)?

I find all places in a Word 2007 document where content copied from Power Point 2007 and then pasted into a Word 2007 document does not appear in the subsequent PDF file I generate. White space of the same size as the pasted content appears in its place. Why is this happening and are there any suggestions to work around this issue? What is curious is the free PDF creation tool that you can use to generate a PDF within Word 2007 (by choosing file save-as PDF) does NOT have this same issue. I don't want to use Word's tool since it doesn't allow for the option settings flexibility I need to produce the final PDF.
I already tried saving the Word file as XML and then re-saving as Word .docx and regenerating the PDF from Acrobat: the graphics are still missing. I also tried in Acrobat Help> Repair Installation and then shut down/restarted my computer. Again, the regenerated PDF is missing the graphics.
Personally, I do not use a copy/paste method; rather, I use insert>picture>from file or paste special as a grphic file type. I know the same graphics placed this way come out fine in a PDF I generate from Acrobat. However, I support a bunch of engineers who make copy/paste a shortcut habit. I will have no luck telling them not to do this.
I appreciate any help with this.

Preferences in Acrobat reader under Page Display are already set to Show Large Images. I assume that is the setting you mentioned.
I don't know of any setting in Word 2007 that would make a difference. Does anyone else have work around suggestions?

Why Can't I Copy/Paste Into Dreamweaver CS6?

I am running Windows XP Professional w/ Service Pack 3 and I have Dreamweaver CS4 and CS6 installed.
When I work on sites in CS6 I find I'm having issues with copying and pasting. It doesn't matter where I try to pull the information from, it won't paste into Dreamweaver CS6 (code view or design view). It seems to work fine in CS4, as well as every other application I try to paste to.
I don't have CS4 and CS6 open simultaneously. I just kept CS4 because it had a bunch of info on other sites I need to transfer over, as well as testing CS6 before fully commiting to it.
Any insight or help would be appreciated.
Thanks.

I have this problem, too, and it's driving me f'n crazy, too!
While I'm happy other forum members are offering to help by asking diagnostic questions, why grill us over what we have installed and what we can and can't do? This is a problem shared by many users. Why is the burden of "proof' on our shoulders? No offense meant, Nancy and Murray, but are you going to be able to resolve this bug? Unless you work at Adobe, I doubt it! It's not something WE are doing.
I've been using Dreamweaver since version 1.0 in 1998 or so, and I've never had this problem. It seems like something that should be pretty basic to identify and fix. Shouldn't Adobe be on these forums asking what programs we have installed on our machines and what we can and can't do? What help is it if a fellow forum member asks these questions? Adobe is a major corporation that should be listening to our issues, especially if we're forking over $600 PER YEAR for Creative Cloud!
This problem needs to be fixed, and it needs to be fixed now. I can't work like this!

Why is Pages exporting .pdf for .jpg when I copy/paste into another application?

Someone sent me a document that has pictures in it. I want to copy the whole thing and just paste it into an e-mail to post to a blog that way, but when I do it converts all of the .jpg files to .pdf files. I've tried pasting into Mail, which is native to Apple, and this happens. I've tried pasting it to gmail, a web app, and this happens, so I'm sure this is happening on the part of pages and not the applications I'm importing into. How do I change that?
Please help! Thx
*P.S. And just out of frustration for Pages lately (due to no new updates in 3 years), why are there so few options to change in preferences and no support for external plug-ins (like Mendeley and other reference managers that work just fine with OpenOffice)?

d moon wrote:
Someone sent me a document that has pictures in it. I want to copy the whole thing and just paste it into an e-mail to post to a blog that way, but when I do it converts all of the .jpg files to .pdf files. I've tried pasting into Mail, which is native to Apple, and this happens. I've tried pasting it to gmail, a web app, and this happens, so I'm sure this is happening on the part of pages and not the applications I'm importing into. How do I change that?
PDF is the unique format available allowing Pages to transfert a mix of different objects to an other application. The fact that the app is an Apple or a third party one doesn't matter.
I'm just surprised by the fact that copying a single jpej object give the same result under Lion. I was not remembering that it behaved this way with older operating systems.
If you really want to pass the jpegs, you must enter in the internals of the Pages document.
Duplicate the azerty.pages document
rename the replicate as azerty.zip
Double click it.
You will get a folder named azerty.
It will contain several files including the wanted jpegs.
*P.S. And just out of frustration for Pages lately (due to no new updates in 3 years)
In three years, Pages evolved from
4.0 to 4.0.1, 4.0.2, 4.0.3, 4.0.4, 4.0.5, 4.1
As far as I know this means six updates.
why are there so few options to change in preferences and no support for external plug-ins (like Mendeley and other reference managers that work just fine with OpenOffice)?
As far as I know, Apple if ree to design its produces as it want.
iWork is not designed as a clone of OpenOffice which is a clone of M…oSoft Office.
Happily, one of the rules applying to Apple products design is :
++-+-+-+-+-+-+-+-++
Apple Human Interface Guidelines:
Apply the 80 Percent Solution
During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚ that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
+-+-+-+-+-+-+-+-+
I really hope that the Pages Preferences dialog will never resemble to Office one.
Yvan KOENIG (VALLAURIS, France) vendredi 11 janvier 2011 10:53:47
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Copy & Paste into Esbase 7x console from Excel

Similar Messages

Maybe you are looking for