Copy responses table to create new (filtered) ones

Hi! I would like to duplicate the ALL RESPONSES table onto new sheets, and generate two tables from that information. Basically, the form I have created will divide the respondents into two groups. So I would like to see a table that includes all responses (which is the default table), then another table with only group A, and another with group B. I figured it would be easier to just copy the main table and filter the info in the new ones. Is this possible? Is it possible also to build summary reports based on the newly created (filtered) tables? Thanks guys

You can add additional tables by going to the top Insert menu and selection "Sheet". You can then copy and paste data into it - note these other sheets/tables are not live data, nor are they connected to the original response table. They are just copies of the data.
The summary report currently can only show charts for the main response table, it won't work for the newly created sheets/tables.
Randy

Similar Messages

With PS 7 create new Place two objects on the new file then you may cut copy and paste Cs2 create new place two object on the new file Cut is not available how does one cut and paste in new file

With PS 7
create new
Place two objects on the new file
then you may cut copy and paste
Cs2
create new
place two object on the new file
Cut is not available how does one cut and paste in new file

If your using File>Place then photoshop cs2 creates what's known as Smart Objects, which photoshop 7 didn't have.
In photoshop cs2 you can rasterize the smart objects and that should make the Cut function available.
Select both placed layers, right click on the area to the right of the tumbnail and select Rasterize Layers.
If in photoshop cs2 you to Help>Photoshop Help and look under Layers>Smart Objects, that should give you a good overview of what smart objects are.

Copy long text during creating new assets by reference

Hi,
I would like to have copy long text during creating new assets by reference. Is it place in spro where I can set it?
Rgds, Stenwa

Hi Stenwa,
For the field Description you cen set the indicator Indicator: "Copy field group from reference asset" in the screen layout rule.
If this indicator is set, the screen layout rule specifies that when you create an asset using another asset as a reference, the specified field group is automatically supplied with values from the reference asset.
For the logtext there is a possibility to maintaine a text in the tables STXH or STXL with key ANLA
regards Bernhard

Mapping tool creates new columns one at a time

Hi All,
I'm using Kodo 3.2.2 with MySql 4.1. I have a fairly large table (over
2million rows) representing one persistent class. I need to add several
new fields to the object, which will require a refresh mapping on the
database to add new columns for the fields.
It seems when I run refresh mapping on the database, Kodo is adding each
new field individually in seperate ALTER TABLE statements, rather than
adding all the columns in one ALTER TABLE statement.
With MySQL and large tables, this can really increase the time required to
refresh the mapping - I've tried with MSSQL and that database must handle
ALTER TABLE commands differently because it doesn't take a fraction of the
time that MySQL takes.
Is this a bug (I doubt it), but rather a feature improvement?
Thoughts?
Thanks,
Brendan

Thanks Abe for the reply - I've been meaning to look at the process of
creating SQL scripts to perform the refresh mappings on our databases.
I'll have a look at this process before we talk contracting!
Thanks,
Brendan
Abe White wrote:
Unfortunately, we don't have any immediate plans to optimize ALTER TABLEsince
it's not a runtime operation, and as you say most DBs don't have a problemwith
it. Also, note that the documentation shows how to get Kodo to create SQL
scripts rather than directly modify the DB; you could easily edit thescripts
Kodo generates to make them more efficient before piping the SQL to MySQLusing
its client app. (Note that Kodo 3.3 introduces the ability to generate SQL
scripts directly from the mapping tool, rather than having to take an extrastep
through the schema tool).
If getting Kodo to combine ALTER statements is important to you, you couldalso
contact [email protected] about contracting us to expedite this work.

COPA - How to add table when create new characteristic

Hi all,
I want to create new characteristic in COPA, that is batch (as currently, FG's price is manged by batch).
I find that this value is maintain in table VBRP. However, when I create new characteristic, I dont is this table in current list.
Please tell me how can I add this table ?
Step by step what I did is:
1.KEA5: create new characteristic
2. enter characteristic name
3. choose "transfer from SAP table"
4. because it doesnt have table VBRP in the this, so I type directly "Table Fields --> Table"
5. Systems show mesg "Enter valid reference table"
Please tell me how can I add this table ?

Hi Emily,
Pls check the SAP Note 111232 which gives similar solution that of you are looking for...
Follow the procedure...
Please create a characteristic by transferring it from table VBRP and
then change the automatically from system defined TKEZU entries like
the note 111232 explains.
The way to solve the problem would be to change the assignment
table TKEZU by exchanging VBRP with KOMP in the table name:
(1) Delete the following entry in table TKEZU (you can maintain TKEZU
with view V_TKEZU in transaction SM30):
Characteristic, B Tran, Table, Field name, Offset, Length
(2) Add the following entry to table TKEZU:
Characteristic, B Tran, Table, Field name, Offset, Length
XXXXX KEDR KOMP BWTAR
(3) Generate the environment of your operating concern.
Pls revert with result...
Srikanth Munnaluri

How to add one button at top of table that creates new rows each time a user clicks on it?

In the help guide, there is an example of adding buttons to each row - an Add Row and Delete Row button. I am interested in having one button at the top of the table that can add rows.

Hi,
You can create a table with a header row, where you can place your add button in one of its cells.
Then you need a script to create a new row in the buttons click event. In a table named 'Table1' with a row named 'Row1' it looks this way:
Table1._Row1.addInstance()

Simple: How to copy a Table from one Database to another?

I already know how to do it by creating an identical table and then inserting the Data.
Like so:
SET IDENTITY_INSERT dByDtMinusC5 ON
INSERT INTO [DB1]..T1 ([Id], [HbyD] , [K] )
SELECT [Id], [[HbyD]]] ,[K] FROM [DB2]..T2
As you can see I need to have T1 in order to copy T2 into DB1. Is there any way that I could auto create T1 and copy T2?
There are so many forums in sql server Category, I hope I posted in the right one :0 . We need tag system for forums.

Hi Bhupinder,
According to your description, you want to copy a table with Primary keys from one database to another database.
As per my understanding, I think the best method is use Transfer SQL Server Objects Task in SQL Server Integration Services. The Transfer SQL Server Objects task transfers one or more types of objects in a SQL Server database between instances of SQL Server.
Server roles, roles, and users from the specified database can be copied, as well as the permissions for the transferred objects. Indexes, Triggers, Full-text indexes, Primary keys, Foreign keys can also be copied.
To use the Transfer SQL Server Objects Task, we should create a SQL Server Integration Services Project in SQL Server Data Tools, then drag a Transfer SQL Server Objects Task to Control Flow pane. Specify SourceConnection, SourceDatabase, DestinationConnection
and DestinationDatabase for the Connection, select the table in the ObjectsToCopy category, then change CopyPrimaryKeys to True and the other corresponding properties in the task.
References:
Transfer SQL Server Objects Task
Transfer SQL Server Objects Task in SSIS 2008 R2 With Example
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to copy a table from one text frame to another...

Is there a way to copy a table from one text frame to another? I'm using JavaScript. The following will move a table from one text frame to another, but I need to copy.
var srcFrame = document.textFrames.item("section-template");
var dstFrame = document.textFrames.item("test");
srcFrame.characters[0].move(LocationOptions.before, dstFrame.insertionPoints[0]);
Thanks,
Mike-

Hi Bhupinder,
According to your description, you want to copy a table with Primary keys from one database to another database.
As per my understanding, I think the best method is use Transfer SQL Server Objects Task in SQL Server Integration Services. The Transfer SQL Server Objects task transfers one or more types of objects in a SQL Server database between instances of SQL Server.
Server roles, roles, and users from the specified database can be copied, as well as the permissions for the transferred objects. Indexes, Triggers, Full-text indexes, Primary keys, Foreign keys can also be copied.
To use the Transfer SQL Server Objects Task, we should create a SQL Server Integration Services Project in SQL Server Data Tools, then drag a Transfer SQL Server Objects Task to Control Flow pane. Specify SourceConnection, SourceDatabase, DestinationConnection
and DestinationDatabase for the Connection, select the table in the ObjectsToCopy category, then change CopyPrimaryKeys to True and the other corresponding properties in the task.
References:
Transfer SQL Server Objects Task
Transfer SQL Server Objects Task in SSIS 2008 R2 With Example
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

4.0 EA3 - Data Default not duplicated when copying a table

I noticed that when copying a table from one schema to another, if a column has a data default property it is not preserved.
Steps to recreate:
Copy a table that has at least one column with a non-null DATA_DEFAULT property (right click on table -> table -> copy)
Double click on the new table, and open the Columns tab. Notice that all values under DATA_DEFAULT are null.

The same behavious exists in 3.2.20.09 and whether the table has existing data or not.

Create new domain file

How do I create a new, second, domain file in iWeb?
Is there a way to do it without duplicating an existing domain file?

Quit iWeb and drag your domain file(s) into the trash.
Relaunch iWeb and it will be forced to create a new blank domain file.
Create new folders - one for each file, drag your old one out of the trash into one of them.
Open any site by double clicking the appropriate domain file.
Duplicate your blank and put it in another folder so that, in future, you have a "clean" domain file to duplicate and start new sites.
This is the only sensible way to start new sites as the "accepted" method of duplicating an existing one and deleting the pages is probably going to cause you problems with domain file corruption somewhere down the line.
For more on this see...
http://discussions.apple.com/thread.jspa?threadID=1365344&tstart=0

Hi guys n girls. How do you copy a whole table to create a new table with all cell sizes in tact? Thanks for your help. Jason.

Hi guys n girls. How do you copy a whole table to create a new table with all cell sizes in tact? Thanks for your help. Jason.
when you copy n paste into a new table, all the cell sizes are changed.
is there a way to put in a new table from your templates into an existing file, different to the standard very basic ones in insert table.
I look forward to your answers. Your help is very much appreciated.
Also how do you search for question answers already written in this support area please.

Hi Jason,
In Numbers 3, you can select a whole table by clicking once in the table to make it active, then click once on the "bull's eye" at the top left.
Now copy and paste. All formatting (and any cell content) is pasted intact. In Numbers 2.3 (Numbers '09) it is a little different for selecting a whole table. But I won't go into that unless you are using Numbers '09. Please reply.
I don't like the look of the tables in Insert Table. I keep custom tables in My Templates. I have set Numbers > Preferences > General > For New Documents > Use template: (name of my favourite custom template)
That opens when I launch Numbers, or ask for a new document (command n). Note that if you follow this preference setting, then Menu > File > New From Template Chooser (for another template) requires you to hold down the option key in that menu.
Regards,
Ian.
Message was edited by: Yellowbox. All formatting (and any cell content) is pasted intact.

How do you Copy a row to create a new row in the same table?

Hi,
We have a PurchaseOrderHeaderView object and on click of Copy Purchase Order we want to copy a row in PURCHASE_ORDER_HEADER table to create a new row. We don't want to copy the primary key only the remaining fields.
Regards
Madhuri

If you use ADF BC, you can create a new row programatically via createRow and use a sequence to create the Id and use the "original" row (probably the current row in the view object) to copy the values from to newly created row. Then use insertRow and commit to create the copied row.
Ronald

How to Create new database (copy all table with data excluding 2 table )with existing database.

Please follow the scenario:
using C#
1) current database file name is DB20122013.
when user click on new year button
2)Create backup copy of current database
3)New database should create with all table(excluding table "Dailytemp" and "DailyMain") with data and database name as DB20132014.
Musakkhir Sayyed.

Hi,
I hope, below stored procedure is useful for your scenario.
CREATE PROC Create_New_Database
( @DBNAME VARCHAR(550)
)AS
Test : Exec [Create_New_Database] @DBNAME='DB20122013'
BEGIN TRY
SET NOCOUNT ON
DECLARE @sql VARCHAR(MAX), @DBNAME_NEW VARCHAR(550),@num int
IF EXISTS(SELECT 1 FROM sys.databases WHERE name=@DBNAME) AND ISNUMERIC(RIGHT(@DBNAME,4))=1
BEGIN
SELECT @num= RIGHT(@DBNAME,4)
SELECT @DBNAME_NEW='DB'+CAST(@num AS VARCHAR(10))+''+CAST(@num+1 AS VARCHAR(10))
IF EXISTS(SELECT 1 FROM sys.databases WHERE name=@DBNAME_NEW)
BEGIN
SELECT @DBNAME_NEW+' database already exists'
END
ELSE
BEGIN
SET @sql='USE '+@DBNAME+' '+' backup database '+@DBNAME+' to disk = ''C:\'+@DBNAME+'.bak'' '
+' restore database '+@DBNAME_NEW+' from disk = ''C:\'+@DBNAME+'.bak'''
+' with move '''+@DBNAME+''' to ''C:\'+@DBNAME+'_data.mdf'' ,
move '''+@DBNAME+'_log'' to ''C:\'+@DBNAME+'_log.log'''
EXEC (@sql)
SET @sql=''
SET @sql=' USE '+@DBNAME_NEW+' IF EXISTS(SELECT 1 FROM SYS.TABLES WHERE NAME=''Dailytemp'')
BEGIN DROP TABLE Dailytemp END IF EXISTS(SELECT 1 FROM SYS.TABLES WHERE NAME=''DailyMain'')
BEGIN DROP TABLE DailyMain END '
EXEC (@sql)
END
END
ELSE
BEGIN
SELECT 'Database is now found or Database name does not mach the scenario'
END
SET NOCOUNT OFF
END TRY
BEGIN CATCH
DECLARE @ErrorMessage NVARCHAR(4000)
DECLARE @ErrorSeverity INT
DECLARE @ErrorState INT
SELECT @ErrorMessage = ERROR_MESSAGE(), @ErrorSeverity = ERROR_SEVERITY(),@ErrorState = ERROR_STATE()
RAISERROR (@ErrorMessage,@ErrorSeverity,@ErrorState )
END CATCH;
GO
Regards,
RAMBHARATH

JOIN two tables and creat a new one

dear all,
as a newbie in Bw i have a question.
I worked already with other etl tools (powercenter) where there are objects to join 2 tables and create a new one to create a total transforming process to load a fact table.
In BW an INFOSET is the only thing to join 2 odssen. On this a query can be created.
BUT HOW TO JOIN 2 TABLES (= only ODS object?) AND CREATE A NEW TABLE FOR FUTHER PROCESSING ????
Regards,
Herman

hi jacobs, refer to these links particularly second one
http://help.sap.com/saphelp_erp2004/helpdata/en/92/43ec39d0383f09e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/f1/713c3b
35703079e10000000a114084/content.htm
hope this clears ur doubt
Assigning points is the way of saying thanks in sdn
ravi

Creating a new table next to an existing one

I have attached the table I created...(I'm a
beginner....forgive me for being simplistic in design). I want to
create a separate table for "Friday" right next to the existing
table. How do i get the new table to align to the right of the
existing table? I tried just extending the table- that is, adding
rows/columns so that I could then arrange it to look like a
separate table, but couldn't get it to work....lost in "format
hell."
I know it must be easy....
Also....why can't i seem to add or delete cells from this
table?! There is some formatting error I'm making that I can't
understand.
thanks!

To select a whole table, click in it in Design view. Then
look at the Tag
Selector bar. Click on the right-most <table>. You've
just selected an
entire table. Cut it from the page with Ctrl-X. Then click in
the outer
table's left cell, and paste the cut table in with Ctrl-V.
Like that.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"bj nick" <[email protected]> wrote in
message
news:[email protected]...
> Thanks for your response.
>
> When I try this, the entire table is "cut." I've tried
it several ways to
> no
> avail. Also, when I select cells to delete, they will
not delete. I will
> select
> a row of unused cells, and can't delete them. I don't
get it.
>
> Here is the code:
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <title>Untitled Document</title>
> <style type="text/css">
> 
> </style>
> </head>
>
> <body>
> <table width="674" border="0">
> <tr>
> <td width="615"><table width="578"
border="2">
> <tr>
> <td width="130" bgcolor="#66FF00"
class="style3"><div
> align="center"
> class="style10">Monday </div></td>
> <td width="127" bgcolor="#66FF00"
class="style3"><div
> align="center"
> class="style10">Tuesday</div></td>
> <td width="137" bgcolor="#66FF00"
class="style3"><div
> align="center"
> class="style10">Wednesday</div></td>
> <td colspan="2" bgcolor="#66FF00"
class="style3"><div
> align="center"
> class="style10">Thursday</div>
> <div align="center"
class="style10"></div></td>
> </tr>
> <tr>
> <td colspan="5" bgcolor="#FFCC00"
class="style15"><div
> align="center">First Bell </div>
> <div align="center"></div>
> <div align="center"></div>
> <div align="center"></div>
> <div align="center"></div></td>
> </tr>
> <tr>
> <td bgcolor="#FFCC00" class="style3"><div
align="center"
> class="style12">Attendance
/ </div></td>
> <td bgcolor="#FFCC00" class="style3"><div
align="center"
> class="style12">Homework check-in /
</div></td>
> <td colspan="3" bgcolor="#FFCC00"
class="style3"><div align="left"
> class="style12">Class business / Journals
</div></td>
> </tr>
> <tr>
> <td colspan="5" bgcolor="#FFCC00"
class="style3"><div
> align="center"
> class="style12">Five - a - Day
</div></td>
> </tr>
> <tr>
> <td colspan="5" bgcolor="#FFCC00"
class="style3"><div
> align="center"
> class="style12">Reading</div></td>
> </tr>
> <tr>
> <td colspan="5" bgcolor="#FFCC00"
class="style3"><div
> align="center"
> class="style12">Math</div></td>
> </tr>
> <tr>
> <td colspan="5" bgcolor="#FFCC00"><div
align="center"
> class="style12">Recess</div></td>
> </tr>
> <tr>
> <td colspan="5" bgcolor="#FFCC00"><div
align="center"
> class="style12">Language Arts </div></td>
> </tr>
> <tr>
> <td colspan="5" bgcolor="#FFCC00"><div
align="center"
> class="style12">ELD (English Language
Development)</div></td>
> </tr>
> <tr>
> <td colspan="5" bgcolor="#FFCC00"><div
align="center"
> class="style12">Lunch</div></td>
> </tr>
> <tr>
> <td bgcolor="#FFCC00">Science/Soc. Studies
</td>
> <td bgcolor="#FFCC00">Science/Soc.
Studies</td>
> <td bgcolor="#FFCC00">Science/Soc.
Studies</td>
> <td width="147" bgcolor="#FFCC00">Science/Soc.
Studies</td>
> <td width="1"
bgcolor="#FFCC00"> </td>
> </tr>
> <tr>
> <td bgcolor="#FFCC00"> </td>
> <td bgcolor="#FFCC00"> </td>
> <td bgcolor="#FFCC00"> </td>
> <td bgcolor="#FFCC00"> </td>
> <td bgcolor="#FFCC00"> </td>
> </tr>
> <tr>
> <td colspan="5" bgcolor="#FFCC00"><div
align="center"><span
>
class="style16">Dismissal</span></div></td>
> </tr>
> <tr>
> <td bgcolor="#FFCC00"> </td>
> <td bgcolor="#FFCC00"> </td>
> <td bgcolor="#FFCC00"> </td>
> <td bgcolor="#FFCC00"> </td>
> <td bgcolor="#FFCC00"> </td>
> </tr>
> <tr>
> <td bgcolor="#FFCC00"> </td>
> <td bgcolor="#FFCC00"> </td>
> <td bgcolor="#FFCC00"> </td>
> <td bgcolor="#FFCC00"> </td>
> <td bgcolor="#FFCC00"> </td>
> </tr>
> <tr>
> <td bgcolor="#FFCC00"> </td>
> <td bgcolor="#FFCC00"> </td>
> <td bgcolor="#FFCC00"> </td>
> <td bgcolor="#FFCC00"> </td>
> <td bgcolor="#FFCC00"> </td>
> </tr>
> <tr>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> </tr>
> <tr>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> </tr>
> <tr>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> </tr>
> <tr>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> <td> </td>
> </tr>
> </table></td>
> <td width="49"> </td>
> </tr>
> <tr>
> <td> </td>
> <td> </td>
> </tr>
> </table>
> <p> </p>
> <p> </p>
> </body>
> </html>
>
>

Copy responses table to create new (filtered) ones

Similar Messages

Maybe you are looking for