Copy SAP Stardard Program (MM41/MM42/MM43) and Change the Menu

I just get a requirement to copy the standard SAP T-code (Article create/change/displaty) as a customized T-code, then change the program menu to point as another t-code. How I can do this correctly?!
what I do is copy the function group and the program as a new one respectively, then main the menu bar , but how can I assign the customized t_code or new program for the new function group?!
Thanks in advanced

You can create the new tcode via SE93, specifying the new program name and initial start screen.
Regards,
Rich Heilman

Similar Messages

Add custom MARC fields in MM41, MM42, MM43?

Hi all,
I need to implement 4 custom fields (aleady appended to MARC) to MM41, MM42, MM43 - I know how to add the new subscreen from the configuration path Logistics General/ Material Master/Configuring the material master (have also read OSS note 44410).
My questions are:
1) Will this configuration work for Articles (as opposed to materials) & what are the differences?
2) Is there a Badi needed to transfer custom fields to MARC in MM41/2/3? I can't find one - the fields only need screen validation and nothing else.
Many thanks in advance

Hi,
Please refer the below link.
This is for MM01. I understand that you are into Retail system. Hope the same processing logic can be done in your scenario also.
saptechnical(dot)com(slash)Tutorials(slash)ExitsBADIs(slash)MM(slash)MM01(dot)htm
Replace the bracket words with the correct symbols.
With Regards,
Sumodh.P

How to disable and hide the menu items of 'copy From' button of Goods Recei

hi expert,
I am new in SAP B1. so please help me.
Q:How to disable and hide the menu items of 'copy From' button of Goods Receipt PO form?
Regards
sanoj

Hi Sanoj,
Try This.....
If pVal.FormType = "143" And pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_ACTIVATE And pVal.BeforeAction = False Then
            oform = sbo_application.Forms.GetFormByTypeAndCount(pVal.FormType, "1")
            Dim oitem As SAPbouiCOM.Item
            oitem = oform.Items.Item("10000330")
            'To Disable the button
            oitem.Enabled = False
            'To hide the button
            'oitem.Visible = False
        End If
Thanks
Shafi
Edited by: shafi_sunshine on Sep 15, 2011 7:35 AM

Good Morning. I'm having a problem using both my Photoshop elements and premiere programs. I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in. I am able to open up the organizer without problems,

Good Morning. I'm having a problem using both my Photoshop elements and premiere programs. I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in. I am able to open up the organizer without problems, but when I try to open up the photo editor (either by trying to open up the program from the main menu, or right-clicking on a photo in the organizer to edit in elements), the program asks me to sign in to adobe (which I can do and it doesn't give an an "incorrect password" or log-in ID error) then accept the terms and conditions. When I click to accept the terms and conditions, nothing happens and the editor fails to open. Everytime I click on the program, I get this same "loop" of signing in and accepting T&C's, but the program fails to open. Any advice?

Premiere Elements 10 is now 64 bit, but not PSE10.
Take a look at your scratch disk set-up and if you have a spare volume, allocate that first before the C drive. Elements use scratch disks when it gets low on RAM.
Click image to enlarge
Turn off face recognition and the auto-analyzer to improve performance.
When editing photos or videos check the task manager to see what background processes may be running and end them temporarily if not needed.

In PC I have changed the default app location from default to other and copied the previous content to new location and changed the Default location in preference. Now in iTunes, my previous apps are not visible. Is there any solution to this?

In PC I have changed the default app location from (c:/users/username/My Music/iTunes) to other (d:iTunes) and copied the previous content to new location and changed the Default location in Edit preference. Now in iTunes, my previous apps are not visible. Is there any solution to this?

wjosten - thanks very much for the detailed instructions. I'll try this as soon as I get my replacement and it looks like you'll probably end up getting the green tick

Is there a method in labviewto dynamically save and change the monitor resolution under program control?

Is there a method in labview to dynamically save and change the monitor resolution under program control? I have another application that runs on another monitor. I would like to change the monitor resoultion to 640x480 on program startup, and then restore the monitor resolution back to the user's settings on exit. Can this be done?

vaidehi_joshi wrote:
Is there a method in labview to dynamically save and change the monitor resolution under program control? I have another application that runs on another monitor. I would like to change the monitor resoultion to 640x480 on program startup, and then restore the monitor resolution back to the user's settings on exit. Can this be done?
Have you already done this manually? I've seen Labview scale front panels very strangely when changing resolutions...
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

I''m trying to remove babylon toolbar and have gone to programs/add/remove. uninstalled and deleted the trash bin and still have the toolbar. HELP

I''m trying to remove babylon toolbar and have gone to programs/add/remove. uninstalled and deleted the trash bin and still have the toolbar. HELP

You must have gone to the old microsoft post.
Here is the link:
http://support.microsoft.com/kb/2438651

How to reverse from quality and change the vendor account.

I had made GR, but posted wrong entries, instead of doing one vendor account & i had made in other vendors account, this lot is passed by quality also that means it UD is also done.
how to reverse from quality and change the vendor account.
Thanks and Regards

hi Raj,
Reversing Stock Postings Locate the document in its SAP Library structure
   1. Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
   2. In the field for the movement type, enter
   3. 102 (goods receipt for a purchase order into warehouse - reversal). In the field for the purchase order, enter the purchase order number for the original goods receipt.
Note
You can copy the purchase order number from the inspection lot.
   4. Choose Enter to display the selection screen for the purchase order items.
   5. Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
   6. Save the goods receipt and exit the Materials Management component.
   7. Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
The initial screen for changing a usage decision appears.
   8. Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
   9. To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen.

What is module pool programming?how we can change the standard screen?

Hi EXPERTS
what is module pool programming?how we can change the standard screen using module pool programming ?
please explain with example.

Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
regards,
venkat.

How to resize and change the resolution of a batch of photos using Automator

I searched for a long time tonight looking for the answer to this (seemingly) simple question:
How do I use Automator to scale and change the resolution of a batch of images?
It was not so simple.
Links to this question:
https://discussions.apple.com/message/12341246#12341246
https://discussions.apple.com/message/12342026#12342026
https://discussions.apple.com/message/5785047#5785047
https://discussions.apple.com/message/1173358#1173358
https://discussions.apple.com/message/5641853#5641853
https://discussions.apple.com/message/3207516#3207516
These are just the links on this site - I found them all over the place at MacRumors, Apple Tips, Mac Help, etc.
You can actually manage this in Automator.
Here are the steps that worked for me:
Create an Automator APPLICATION - not a workflow (this is due to the way that I'm batch converting images - workflows might be ok for some cases)
Step 1 is Copy Finder Items
My flow inserts an SD card, opens the DCIM folder that my Nikon creates, selecting the images that I click (command + click to multi-select) and once I have the photos highlighted, I drag them onto this Automator App we're creating.
<== You'll have this guy soon!
As a result - I want to copy the originals to my computer as step 1. I don't touch the originals on the SD card (and cards are cheap so I tend to leave them on the cards as well)
Step 2 is the Scale Images action - you can search the library for this and find it quickly. For my part, I found that scaling images to about 38.8 percent of their size on the SD card is good for uploading to a blog. Change this value to whatever you wish.
Step 3 is Run Shell Script - and here is where we marry the brilliance found at this link with our script.If you have a hard time reading the text in the image, it is as follows:
#bin/bash
for f in "$@"
do
/usr/bin/sips -s dpiHeight 72.0 -s dpiWidth 72.0 $f
done
Save this application (I named mine "Format Photos")
Place the application inside the target folder where you want the images to end up. I do this because when I have the SD card window open, I can also open my "Photos" window and see my App sitting there. I select my images as I mentioned and drag them on top of this app. The app copies the originals and the conversions into the folder.
NOTES: When you open a converted pic in Preview, you will see Resolution = 300 dpi if you go to Tools --> Adjust Size... This reading is explained by another brilliant discussion as sips only touches the JFIF properties inside the file's MetaData. However, if you look at the bottom of the Adjust Size... window, you'll see the image size is probably around 500 kb (give or take depending on the original). My goal was to get the images down from the 3.0 MB I shoot at to around 500 kb. Therefore even though the MetaData still thinks that it is 300 DPI according to Preview, it has been changed to 72 (open it in some other applications mentioned at the links and you'll find different readings - it all depends on what the application reads from the Meta).
This does not rename the files, so you'll get DSC_1000.jpg and DSC_1000 copy.jpg in all likelihood. If that annoys you, add a step into the Automator Application that renames the file after the "Run Shell Script" action has run, and you can have each file renamed according to some convention that you like.
This took a heck of a lot longer than I expected - so I decided to put in the effort to share this with the community and save others the hassle.

PPI is pixels per inch of the image. It is difficult to increase resolution as you are trying to add data that is not there.
But for printing purposes what you want is dpi or dots per inch.
The image processor either accessed from Bridge (tools/photoshp) or PS is a good way to change a batch of images.

What program do I need to change the resolution of a photo?

What program do I need to change the resolution of a photo that is currently a low-res .jpg? I previously had photoshop, but it did not transfer to my new Mac Lion - and it is too expensive to repurchase. Curious if there is there an alternative option? I cannot open hi-res files anymore, and would love a solution. Thanks!

Take a look at Pixlemator in the App Store

I go to "clip adjustments" and change the length of a photo. It reverts back to original length. I also shorten it by moving the yellow "box" around a specific clip. It still reverts back to original length. Why?

I go to "clip adjustments" and change the length of a clip. It reverts back to original length. I've also tried to shorten it by moving the yellow "box" around a specific clip to shorten. It still reverts back to original length. Why?

Welcome to iMovie Discussions.
See my 2nd reply to 'getzcreative', here.

I have bought an used Iphone 5. I dont have the password for the existing login id of the old owner. How do i use the phone and change the log in id?

I have bought an used Iphone 5. I dont have the password for the existing login id of the old owner. How do i use the phone and change the log in id?

Unfortunatly the only way that you can get it off is to get the old user to input the password. You may need to contact that old user and see if he can put the old password in. hope this helps.

When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the test and change the font, it does not change it properly?

When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the text and change the font, it does not change it properly? This is making it impossible to amend.

Hi Janedance1,
If the PDF that you converted already has searchable text, please try disabling OCR as described in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel. (If the PDF was created from a scanned document and doesn't already have searchable text, disabling OCR isn't a great option, as the text won't be searchable/editable in the converted Word doc.)
Please let us know how it goes.
Best,
Sara

Illustrator CC Crashes when I try and change the font

Help! I can not get Illustrator to work - I reinstalled my wacom driver and have troubleshooted with Wacom. This seems to be an issue with Illustrator.
When I open a doc or create a new doc the minute I try and change the font it crashes.

Read the signs for what they are: Your fonts are busted and you have a "bad" font somewhere in there. Remove al lextra fonts and add them back only as needed.
Mylenium

Copy SAP Stardard Program (MM41/MM42/MM43) and Change the Menu

Similar Messages

Maybe you are looking for