Copying Arch install to new SSD
My current Arch install is on an SSD, which is 2 1/2 years old. I'm about to purchase a faster (and larger) SSD to replace it, and reuse the old one in a home server. Is this the best strategy to move my install?
- Do a file level backup of everything to be safe
- dd the entire old SSD to the new SSD (dd if=/dev/sda of=/dev/sdb for example)
- Resize with gparted
Anything wrong with that? Are there any performance or stability reasons to use another method? I've been reading over the SSD wiki, and clearly there is a lot more information available on optimizing SSD performance now. I was going on random blog posts when I set up the current install in March 2010.
DSpider wrote:
https://wiki.archlinux.org/index.php/Fu … with_rsync
Transfer it wherever you want.
Excellent, thanks!
Similar Messages
-
I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working. Adobe Acrobat has been a primary tool for accommodating memory problems after a brain injury. (A car ran me down while I was out getting exercise.) I installed the SSD because I needed my management of PDF files to run faster. I called tech support for help when the software first stopped working, but they needed me to give them a number from my original disks. Because of my disability, I've been having someone come in to clean, and the shelves where I kept my software packages were cleared. I've been hunting for them ever since, but I can't look for them myself for very long at a time. Today I finally found them, but now I can't seem to contact tech support. What happened? I don't want to delete my old files because I need the setup to remain unchanged, because I don't do well with changes. I think all I should need is to have someone located the license file on drive E: and move it to wherever it is needed on the SSD drive, but I don't know what to look for.
Tech support is not normally available on weekends. You should contact them as soon as the weekend passes and pick up where you left off with them.
-
Can I install a new SSD on my MBP without the old hard drive?
Here's the scenario. I'm currently in the Philippines leaving for California for college next week. There, I will buy a new SSD (Samsung 830 to be specific). I want to leave my current HDD (the one in my laptop that I'm using right now) here in the Philippines though as my brother here wants to use it. Is there a way for me to install the new SSD without having my old hard drive with me? My macbook pro is an early 2011 15inch MBP running on Mac OS X version 10.7.3 (Lion). I actually don't want to clone my hard drive or anything because I want to start fresh and new with my new SSD. Most of the tutorials I've read online involve some kind of cloning or having the old hard drive still plugged in and having the SSD connected externally, but these methods won't work for me because I won't have the old hard drive. Thanks so much
The only negative to not having the original drive will be the work needed to reinstall all the apps and reconfigure to your liking. You will also have to decide whether to stay on Lion (which you should update to 10.7.4, BTW) or bite the bullet and take a leap of faith on Mountain Lion.
In either case, to simplify matters you would do well to concoct a Lion or ML bootable installer on a USB stick. In either case, you need to get the corresponding installer downloaded onto the hard drive and, instead of running it to execute the install, extract the coveted InstallESD.dmg image from which you construct the bootable installer. See here for details: https://discussions.apple.com/message/17782820#17782820 The procedure applies the same to both of the latest cat flavors. -
Help with Installing a new SSD on my x201
I just purchased a crucial 256gb realssd C300 for my 2month old x201. What is the best way to install the new SSD. I have read that a simple cloning may not be the best approach. Can I do a clean install by using the boot disk I made when I first got the x201 along with the recovery media disks? I searched for a thread on this but haven't been able to find any.
Thanks in advance.Your old HDD should be already aligned, so cloning is not a problem.
Installing seven from a vanilla media or from the lenovo original media should lead also in aligned partition(s).
You can just check the alignement with Paragon align utility and eventually and you can align after the installation process, whatever method you have choosed to install. -
Setting up OSX after installing a new SSD and moving HDD to optical bay
Hey all,
I know there are a tonne of other posts similar to this one in here, but I couldn't find the specific answers I was looking for.
Soon I'm going to remove my optical bay and put my current HDD in it's place, and install a brand new SSD where the original HDD once was. I'm comfortable with the hardware installation but am wary about what to expect on first power up afterwards.
I would like to ideally run OSX Mavericks and all of my apps (everything from Notepad to Premiere Pro) from the SSD, and leave all of my data on the HDD. I have an early 2011 13" Macbook Pro, model number A1278.
- When I first turn the computer on after the hardware switcheroo, what can I expect to see? How do I re-install OSX Mavericks onto the new drive? Am I right in thinking that Mavericks is merely an upgrade rather than a whole new OSX and that I will need to install Lion and then upgrade to Mavericks rather than just reboot immediately to Mavericks?
- How can I then remove Mavericks from the original HDD?
- Exactly which files do I need to move to completely relocate the apps to the new drive? Is it as simple as moving the entire applications folder over, or are there hidden files dotted all over the place that I need to consider also?
Thanks in advance,
AdamAdam,
if your current HDD is a SATA III (6.0 Gb/s maximum throughput) drive, then you might find that you’ll have problems with it in the Optibay position. If this is the case, you’d probably be better off putting your SATA III drive into an external enclosure, and purchasing a SATA II (3.0 Gb/s maximum) drive to install in the Optibay.
If you have a SATA-to-USB or SATA-to-FireWire adapter, you can connect your SSD externally and format it with Disk Utility. After that, you could use a cloning utility to copy the contents of your internal HDD to your SSD (presuming that the SSD is at least as large as the amount of space currently used on your internal HDD), and then boot from the external SSD using Startup Manager to make sure that everything works well on it; that will save you from having to make sure that all of the scattered hidden files have been migrated. Once you’ve confirmed that your apps run well from the SSD, you can then install the SSD and move the HDD to wherever it’s going. An advantage of keeping Mavericks on your HDD is that you can boot from it if needed, e.g. should your SSD develop a problem. -
Recently, my mid-2009 MacBook Pro has been crashing when I close the screen ("it's having a problem recognizing when the screen is closed/open and deciding what to do, error overload etc."). It wasn't an SMC issue so I took it to an Apple Store, ran some tests, and decided my hard-drive is failing.
Not wanting to spend an insane amount of money on some "official apple hard-drive," I want to install a new 256GB SSD instead. Hoping to squeeze as much life out of this computer as possible (in January I upgraded from 4 GB RAM to 8 GB), I would like to try and start from scratch, i.e. back-up important folders, music, photos etc. and only take that to the new hard-drive. If someone could explain all the steps I need to take to safely complete this task (or point me in the direction of a guide) I'd appreciate it.
Potentially Important info:
Model: mid-2009 13'' MacBook Pro
Processor: 2.53 GHz Intel Core 2 Duo
Memory: 4 GB 1067 MHz DDR3
Software: OS X 10.8.4
Some additional questions I have...
Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
word-processing. The batter was replaced in March, the RAM was upgraded to 8 GB in January. When the battery was swapped, the trackpad went nuts so that's new too. Only other issues are a slightly loose audio jack and the left side of the screen being slightly wobbly (hinge is worn I'm told).cwgonzalez1192
Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
word-processing.
Well there is no "official Apple HD / SSD" in any regard, no worries there.
If as you say youre only using same for surfing and word processing, why the need for a SSD? You would not notice any speed diff. in use on either of those,....in boot times yes, but in word or surfing, not.
You can push it likely a few more years, for mere surfing and word processing,...many many years. Up TO the point that any major fixes become unrealistic relative to getting a new(ER) machine.
Concerned with a boot clone? yes and no. Its an ideal immediate recovery, since you cannot boot from Time Machine, ....in case of HD crash, recovery takes seconds from boot, or 20 mins or so from removing old and installing a clone. All the prosumers and pros have at least one updated clone of their prime machines.
You can do a "fresh install" if you choose, however if your current drive is FINE, why not merely clone it and save yourself some headache?...., but that is your prerogative of course. Ideally 2 drives, one to backup your data (you need that regardless of installing a new drive for sake of a backup/archive,...ideally 2 actually, not merely one).
You could clone internal to NEW SSD/HD , ...then offload unnecessary files to an external to free up space and clutter and run off the clone, and this would only take a couple hours......the clone itself takes approx. 40+ mins.
CLONE Apps :
Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
(Free superduper APP above)
CCC App
http://www.bombich.com/ -
So I came to this problem a while ago. M ycomputer basically froze so I was forced to shut down by holding the button down. When I started it up I got the flashing folder with a question mark. I started it up holding down the command and r keys which brought me to disk utility. Although my computer doesn't read that I have a hard drive to start it up. When I click on the disk utility app, I cannot verify or repair anything either. The buttons won't allow me to click on them. It also shows "Mac OSX Base System" which shows I have files and what not saved. I had been told that I need a new hard drive so I bought and manually installed a OWC SSD 240GB drive and when i booted the computer up it booted up yo the operating system fine with all my files and what not on there. After about twenty minutes, it froze again. I forced a shut down, restarted and the same thing happened. I am not able to choose my SSD to boot up, although thats probably because it doesn't have an operating system installed on it??
i have a Macbook Pro 13" 2011
any help would be great, I'm overall confused.ryansaint11,
this isn’t Apple support; this is a user-to-user forum. We’re just fellow users of Apple products here.
If you want to boot from your SSD, then you should put the SSD where your HDD currently is, and put the HDD into the optical bay. (That setup will also get you the best performance.) At the moment, you’re still booting from your HDD. Note that you will need to format your SSD in Disk Utility [with the “Mac OS X Extended (Journaled)” format] so that you can install OS X onto it.
Since you have an Early 2011 model, it might or might not have originally come with grey installation DVDs. You will be able to find out whether it did or not by trying to use OS X Internet Recovery to install OS X onto your SSD. If it does not work, or if the installed OS turns out to be Snow Leopard, then it will have originally come with the DVDs, and you should purchase a replacement pair of DVDs from Apple or iFixit; those discs will have your MacBook Pro’s Apple Hardware Test and its iLife apps. If the installed OS turns out to be Lion, then it will not originally have come with the grey installation DVDs, and your Apple Hardware Test will be installed along with Lion, and your iLife apps will be downloadable from the Mac App Store. -
I installed a new SSD, My ipod is not syncing with the original HD
I recently installed a new Crucial M4 SSD. My iTunes library is synced to my HD (/e:) My iPod touch 4g wants to sync with my SSD and does not recognize the original HD is still in my computer. How can I get my iPod to sync with the original HD that contains my iTunes library?
When all the media is in your iTunes library/on the computer:
- Connect the iPod to the comp;uter and make a backup by righ clicking on the iPOd under Devices in iTubes and select Back Up
- Restore the iPod from that backup
Note that the backup that iTunes makes does not included synced media like apps and music.
An iPod can only sync with one iTunes library. gtthe iPod seen the new SSD/iTunes as a new iTunes library. -
Can I Get an Arch Install ISO Newer than 2010.05?
I'm trying to install arch on a new laptop (Acer Aspire TimelineX 1830T-3505) where the kernel shipped with 2010.05 is neither new enough to support the ethernet nor the wifi. Is there an SVN or something where I can find an Arch install ISO shipped with a newer kernel? (I know that at least the ethernet is supported in the latest kernel.) Thanks!
http://releng.archlinux.org/isos/
-
Approach for fresh OSX install to new SSD drive with restore from TimeMachine
I have an early 2010 MacBook Pro with running Mavericks with FileVault 2 encryption. The drive seems to be failing. I am not able to boot it up. I get a "Prohibitory" sign with freezing. I have attempted various recovery steps: booting with Command-R, running Disk Utility, attempting to do a full restore from TimeMachine, turning off encryption via terminal/command line with no success. I am not able to mount the disk volume. DiskWarrior doesn't seem to support bootable Maverick volumes. I don't the the existing drive deserves additional time.
I've purchased a new SSD drive and I plan to do a fresh OS install on that drive, followed by a restore of my most recentTimeMachine backup to that drive. My backups are not encrypted. Because the current HDD seems to be toast and is running FileVault 2, installing from scratch and then restoring apps and data seems to be the most realistic approach.
Can somebody please tell me what the preferred sequence of steps would be to do this? Particularly the initial OS X install? Since the new drive will not have a recovery partition, I assume that I cannot do Command-R at boot-time to start the install. My system has a DVD drive, but I don't have a Mavericks install disk.
Comments appreciated...Restart the computer. At the chime press and hold down the OPTION key until the boot manager appears. There should be a disk icon for your Time Machine backup drive. Select it and click on the arrow button below it. This will start you into a hidden Recovery HD on your Time Machine backup drive. Select the Disk Utility option and click on the Continue button.
1. After DU loads select your SSD (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
2. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
3. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
5. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
6. Quit Disk Utility and return to the main menu. Select the Install OS X option and click on the Continue button.
7. Be sure to select your SSD as the installation target. -
[SOLVED] Copy packages from current Arch install to new Arch install
Hello!
I'm new to Arch, so that's why I'm posting in the newbie corner. I've been looking everywhere for an answer to this: I want to do a fresh install of my system, but my internet connection is sort of messed up right now (unusually slow). I noticed that every package I have installed on my current Arch are saved in /var/cache/pacman/pkg. Could I make a backup of that directory onto another partition on my hard drive, reinstall Arch, and restore the backup to that same directory in the new install? Would pacman "think" it's already downloaded and skip the download step alltogether?
Thanks.
Last edited by magyckleo (2011-01-31 21:28:44)karol wrote:
From the repo-add manpage: 'repo-add [-q] <path-to-db> <package1> [<package2>...]'
This should create the dbs you need.
Honestly, *I* think, that the manpage is enough and you don't need the wiki (in this case at least).
You know what, do a test, pick a couple packages, copy them somewhere and create a tiny local repo.
Awesome! I managed to make pacman read the package db I created using add-repo.
I added the repo to the pacman.conf. Had to do a little trial & error to figure out I had to put it like this:
[name of db file]
Server = file:///path/to/folder_of_db partition
I was trying to put the file.db.tar.gz complete rute. Of course, pacman let me know with an error that wasn't right.
I tried installing something simple, like wine. First, I did a sudo pacman -Scc to clear the cache. Then I did sudo pacman -S wine. It installed successfully! I'm gonna try with a fresh install this afternoon. I'll let you know of the result.
Thanks everyone!
Last edited by magyckleo (2010-09-27 15:46:05) -
Windows 8 install on new SSD to replace broken HD
My 500GB HD failed on my HP Envy Touchsmart Sleekbook. Before it failed i created a recovery USB stick. I replaced the 500GB HD with a new, blank 240GB SSD. The recovery from my USB stick failed. I ordered new recovery USB stick from HP. Recovery got further this time but then also failed. Recovery got as far as completing the section involving the USB stick but then during the software install part it failed. Tried three times and always failed at the same point.
Is the problem that I have replaced the 500GB drive with a 240GB drive?
FYI during troubleshooting I removed the RAID 0 setup from the on-board 30GB SSD, so that it is currently just another drive on the laptop. Cannot find a way back to the RAID setup utility to recreate it as RAID 0. Don't think this is the problem though?
Any ideas most welcome.
This question was solved.
View Solution.When requesting assistance, please provide the complete model name and product number (p/n) of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please see How Do I Find My Model Number or Product Number? for more assistance locating this information. DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
If you have a "ChkErrBB.CMB : Detect some error during PININST_BBV. error", please try the following;
1) Try Recovery - "Detect error during PININST_BBV – Fix: Set BIOS to Factory Defaults
•Boot computer – immediately click / press F10 to get into the BIOS Manager.
•Click on F9 to set the BIOS to factory default.
•Save and Exit
•Redo the Recovery – remember to leave the wireless light “on” during the Recovery... Didn't work for me
2) Set System Date to 8/4/2012 and Redo Factory Reset and System Recovery... Didn't work for me
Ignition75 states "I managed to get the recovery to work, by changing the system date in BIOS to 2012."
3) Set BIOS to factory default, System Date to 8/4/2012 and performed Minimized Recovery (based on one of these posts)... Successful Minimized Recovery... Set BIOS to factory default, System Date to 8/4/2012 and performed Factory Reset... Worked for me
4) Remove the mSATA drive from the computer and
•Boot computer – immediately click / press F10 to get into the BIOS Manager.
•Click on F9 to set the BIOS to factory default.
•Set System Date to 8/4/2012
•Save and Exit
•Redo the Recovery – remember to leave the wireless light “on” during the Recovery.
Please try the above suggestions and report back with your findings.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
I have a new 2011 MBP that's still pretty clean application and data wise. I have a new Vertex 4 SSD (256GB) to install and want to know whether I need to have that formatted before I install it or will I be able to use a Time Machine backup to perform the format and restore of the Lion OS X and applications? Will I have to get an external SSD enclosure to format the SSD before I install it? Despite the many threads...I am still a little confused as to the exact procedure to use. Most of the threads say use the recovery partition (well if the SSD is new, not formatted) where does this recovery partion reside? Please use the KISS principle when responding...
The only negative to not having the original drive will be the work needed to reinstall all the apps and reconfigure to your liking. You will also have to decide whether to stay on Lion (which you should update to 10.7.4, BTW) or bite the bullet and take a leap of faith on Mountain Lion.
In either case, to simplify matters you would do well to concoct a Lion or ML bootable installer on a USB stick. In either case, you need to get the corresponding installer downloaded onto the hard drive and, instead of running it to execute the install, extract the coveted InstallESD.dmg image from which you construct the bootable installer. See here for details: https://discussions.apple.com/message/17782820#17782820 The procedure applies the same to both of the latest cat flavors. -
Issues installing 2 new SSDs in GT70 0ND laptop
I have just bought a new GT70 0ND-612AU laptop which came with a 1TB HDD. I purchased two crucial M4 256GB SSDs expecting that I would be able to keep the HDD and RAID the two SSD drives together. When I followed the disassembly guide I removed the HDD from the top (back) left position, but there seemed to be no way that I can connect both the mSata drives in the back left bay (or the bottom right bay either). I read that the back left bay is the place to install the SSDs, and my MSI reseller didn't say that I needed extra hardware to be able to super raid the drives, so what do I do?
Quote from: mrwashout on 03-May-13, 12:42:33
Yes I bought it off a reseller and explained that I wanted to be able to buy the SSD's and use the super raid option to raid them with the HDD separate. They never said I needed to purchase anything other than the laptop and the drives - are you saying I need to purchase some other connector/controller?
The Super RAID is two mSATA drives on a dongle that is in the primary drive bay, the other drive sits in the other bay. The Intel controller sees both mSATA drives as two separate drives and lets you RAID them together.
Here is what they look like
If you don't have the dongle you will need to contact support and they will sell you the part you need, but you will have to buy the mSATA drives too if it didn't come with them, unless MSI can sell you those too. -
Can I install a new SSD and Yosemete at the same time?
I have a 2012 macbook 13" and the latest mavericks 10.5.9, can I use disk maker x, then swap my HDD for an SSD and install Yosemite???
If you mean can you have them both connected at the same time, then it's a yes. I have both connected and use the mouse for some functions and the trackpad for others... works a charm.
Maybe you are looking for
-
Blog Archive pictures are not showing correctly- is it possible to fix?
I illustrate each of my blog entries with a small cartoon picture. When I originally made my website in .mac it was fine but since I was forced to switch by Apple to iLife in order to continue to edit my webiste, the archive entires of my blog no lon
-
I created an imovie in 08 and it's 24 mins. long and added a slideshow. In information it is not too long for a single dvd to burn; however, I keep getting encoding error...it seems that in the burn process it's stuck on my theme section. Any help wo
-
Computer slows down when loading firefox, sending email, etc.
-
HT201250 running 32bit programs in 64bit windows 7
My Panasonic camcorder's (SDR-H280) video editing software's (Videocam suite 1.0) upgrade for Winow 7 does not run on Window 7 64bit. I have recently installed WOW64 but cannot run and also the problem is not solved. Please help.
-
PO text using lsmw MATERIAL MASTER
Hi , how to upload PO text trhough LSMW as its only loading 132 char, if i have 400 char how to load. there is a structure in lsmw BMMH7, but what to pass in tdformat and tdline and TDSPRASISO thanks