Copying dimension members from on application to another in Hyp Planning9.2

I have 2 applications in my planning 9.2 . say X and Y I have loaded all the dimesnsionand its members in X and i want to move one of the dimension and its members to the other application Y which doesnt have that pirticular dimension.
do any of you guys familiar with this scenario and is it possible for me to do that.
is there any laternate for this.
any replies would be appreciated.
thanks.

Hi Clarie,
Your understanding is correct, except that you need to give precise baselevel member in *add_dim as you can not write data to parent member and regarding
AppSource.Account1+AppSource.Account2
This logic will work,
*destination_app = appDestination
//list add_dim,skip_dim,*rename_dim
//assuming name of account dimension in source app is account
*when account
*is account1,account2
rec(acct=account3)
//acct is name of account dimension in destination application
//where account3 is the member of destination application account dimension to which sum of account1 and account2 are to be written
Hope this helps,
Kranthi

Similar Messages

Error while copying a page from one application to another application

Hi All
I am using Oracle Apex 4.0
I getting the error ORA-06502 Pl/Sql Numeric error character string buffer too small when i copying a page from one application to another application.
Thanks & Regards
Srikkanth.M

I'm having the same issue. How did you solve this?

Newbie Qs: Copying an outline from one application to another

My apologies for accidentally posting this question twice!
Hello,
I want to copy an outline from one database to another, both on the same server. I know I can save the outline as a .otl file. But how do I actually copy this saved .otl file over to the other database? Sorry if this is a very basic question, complete newbie to Essbase. Thanks.
ps: Is there another way of copying the outline over from one database to another?
Edited by: Sam on Jun 27, 2010 1:48 PM

Open the outline in Edit mode, and from File > Save As, Select "Essbase Server" tab. Navigate to database where you would like to save. If you have data inside the cube, it will give you options on what to do with the data.
Hope this helps
Thanks,
Naveen Mikkilineni

How to copy a plugin from one application to another, is there an export possibility?

I am using Apex 4.2.2 with 10g and OHS.
There is a Gantt chart plugin in the Sample Calendar packaged application. I couldn't find that plugin for download.
When I open it (Application Builder>Application 76373>Shared Components>Plug-ins>Create / Edit)
it states:
*Name (Value Required) Gantt Chart
*Internal Name (Value Required) COM.ORACLE.APEX.GANTT_CHART
Reference Master Plug-in From: 65708911358321918
It refreshes without an error when I press the 'Refresh Plugin' button.
I can copy the SQL code, can dowload the .css file, etc., but I guess it is not enough.
The Information section brings me the http://apex.oracle.com/plugins page, but there is no Gannt plugin.
Is there any possibility to use this plugin in the same workspace in another application?
Or sharing it? Or export and then import it?
Thanks in advance.

Hi,
In Application Builder -> Application XXXX -> Shared Components -> Plug-ins, click on plug-in name which will take you to plug-in details page. Here, on right hand side, you should see "Export Plug-in" under "Tasks". Click this link and follow the wizard.
Regards,
Hari

Copying a page from one application to another

Is it possible to copy a page definition to a different application? When choosing "Copy' on the page definition the application# is hard-coded.

Please take a look at this post, it might help.
Recover Deleted Pages

Copy a page from one app to another

Is there a way to copy one page from an Application into another Application ?
Thanks
Francis.

Francis,
Please see copy Page/region (incl. elements...) to application ( using exp/imp page) ?
Scott

Export and Import a page from one application to another within same WKSPCE

Hello,
Can anyone help me out in moving a page from one application to another within the space workspace. I tried to export it and then import the page, but I am not able to do that. I think the problem is with the application IDs.
Plz help me out with this issue.
Thanks,
Orton

Hi Orton,
moving a page from one application to another within the space workspace
This U can get it, through copying the page from one application to another application within the same workspace
In the top of the page, you have "copy" option.
regards,
Kavitha

Copying single page ,region from one application to another application

Hi,
I need information regarding How to copy single page or region from one application to another application in the same workspace

Hi - have a look at this thread: -
Synonyms
Cheers,
Mike

What are the diffrent ways to copy data from one application to another?

Hi,
Can you guys tell me what are the different ways to copy data from one application to another application??
I know we can do it through script logic using DESTINATION_APP.
Is there any other way to copy data from one application to another application?
Please help me
Thanks,
Charly

You can also call a custom DTSX package in SSIS via the datamanager.
there are at least 5 ways of transfering data in BPC between apps.
1. Through the front end (excel etc) via evdre/evsnds
2. Through Script logic using *Dest App
3. Using BPC's standard export dtsx package via DM
4. Using SSIS using BPC's custom SSIS tasks
5. Through Script logic using stored procs.
i am sure people will come up with more.
remember if you use ssis and move data into any table but the wb, you need to process the cube afterwards.

7.5 NW: Uunable to delete dimension members from the entity dimension

Hi,
I would really appreciate a solution to this. We are planning on implementing an IFRS consolidation using the SAP IFRS Starter Kit. We have created a copy of the IFRS Starter Kit, without any data. In order to customise it for our purposes, we have decided to keep the sample dimension members in Accounts, Flow and AuditID but delete the data in other dimensions. We have managed to delete the sample dimension members from the Time, Inter-company and Conoscope dimensions but are unable to do it for the Entity and RateEntity dimension.
Can anyone please explain why this is happening? There is no data in the application and so, why is this happening? We are on Service Pack 5.
Many thanks in advance.

Hi,
Before going into the BPFs, i am sure you would have already checked, I would do the following:
-Try to process the entity dimension in offline mode. I have seen this happening with some dimenions that i know there is absolutely no transaction action. Just check processing the entity in offline mode. Do not untick 'take the appset offline'.
- You would have done this. Double check for the transaction data.
- Regarding BPFs, its not easy to check this. we had this situation earlier. Please go into the backend and in se16 you will find all the BPF tables with UJB*
There would around 10-12 such tables. Have alook in them. Not all tables need to be looked into. But please have a check there.
- Also check if entity has been referenced to any other dimension. Its good to check if you have INTCO dimension to see if it is referenced there.
Thanks,
Sreeni

How do I copy the style from one control to another?

I need to programmatically copy the style from one graph to another. I'm currently using the importstyle and export style functions but I'd like to avoid that since: 1) I'm creating >100 of the same graphs in a scrolling window and execution time is a concern, and 2) it makes it harder to redistribute the application, and 3) you shouldn't have to import/export from disk just to copy a graph style.
I noticed the copy constructor was disabled so you can't just create a new one from the original. I suppose I could iterate through all the styles and transfer them from the master graph to all the copies but is there an easier way to do that? If not, is there some sample code for that?
I'm using MStudio 7.0 for C
++.
Thanks,
-Bob

One way that you could do this would be to create a helper method that configures your graph rather than configuring it at design-time, then use that helper method to apply the settings to the new graphs that you create. However, this would only work if you wanted all graphs to be configured exactly the same way - this would not work if the settings of your master graph are changing at run-time and you want the new graphs to be configured with the current settings of the master graph.
Another approach is to query each control for IPersistPropertyBag, create an IPropertyBag, pass the IPropertyBag to the master graph's IPersistPropertyBag:ave, then pass the IPropertyBag to the new graph's IPersistPropertyBag::Load implementation. I'm not aware of any implementations of IPropertyBag that are readily available for use in applications, so the tricky part is creating the IPropertyBag. Below is a very simple implementation of IPropertyBag that should be enough to get the job done for this example. First, add this to your stdafx.h:
#include <atlbase.h>
CComModule _Module;
#include <atlcom.h>
#include <atlcoll.h>
Here's the simple IPropertyBag implementation:
class ATL_NO_VTABLE CSimplePropertyBag :
public CComObjectRootEx<CComSingleThreadModel>,
public IPropertyBag
private:
CAtlMap<CComBSTR, CComVariant> m_propertyMap;
public:
BEGIN_COM_MAP(CSimplePropertyBag)
COM_INTERFACE_ENTRY(IPropertyBag)
END_COM_MAP()
STDMETHODIMP Read(LPCOLESTR pszPropName, VARIANT* pVar, IErrorLog* pErrorLog)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
if (SUCCEEDED(::VariantClear(pVar)))
CComBSTR key = pszPropName;
CComVariant value;
if (!m_propertyMap.Lookup(key, value))
hr = E_INVALIDARG;
else
if (SUCCEEDED(::VariantCopy(pVar, &value)))
hr = S_OK;
return hr;
STDMETHODIMP Write(LPCOLESTR pszPropName, VARIANT* pVar)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
m_propertyMap.SetAt(pszPropName, *pVar);
hr = S_OK;
return hr;
Once you have a way to create an implementation of IPropertyBag, you can use IPropertyBag and IPersistPropertyBag to copy the settings from one control to another like this:
void CopyGraphStyle(CNiGraph& source, CNiGraph& target)
LPUNKNOWN pSourceUnknown = source.GetControlUnknown();
LPUNKNOWN pTargetUnknown = target.GetControlUnknown();
if ((pSourceUnknown != NULL) && (pTargetUnknown != NULL))
CComQIPtr<IPersistPropertyBag> pSourcePersist(pSourceUnknown);
CComQIPtr<IPersistPropertyBag> pTargetPersist(pTargetUnknown);
if ((pSourcePersist != NULL) && (pTargetPersist != NULL))
CComObject<CSimplePropertyBag>* pPropertyBag = 0;
CComObject<CSimplePropertyBag>::CreateInstance(&pPropertyBag);
if (pPropertyBag != NULL)
CComQIPtr<IPropertyBag> spPropertyBag(pPropertyBag);
if (spPropertyBag != NULL)
if (SUCCEEDED(pSourcePersist->Save(spPropertyBag, FALSE, TRUE)))
pTargetPersist->Load(spPropertyBag, NULL);
(Note that "CreateInstan ce" above should be CreateInstance - a space gets added for some unknown reason after I click Submit.)
Then you can use this CopyGraphStyle method to copy the settings of the master graph to the new graph. Hope this helps.
- Elton

How do I copy a list from one site to another that has a column that appends changes to existing text?

I want to move a list from one SharePoint site to another, within the same collection. I have created a template and included the content but the column that is selected to append changes to existing text, has not copied in all cases, although it has for
some items.
I have a limited knowledge so won't be able to implement any solutions that require the use of code.

Hi,
According to your post, my understanding is that you wanted to copy a list from one site to another that has a column that appends changes to existing text.
I recommend to use the custom workflow activity Copy List Item Extended Activityto
copy list items and files cross site.
You can do this with codeless SharePoint Designer workflows as long as you can install the
Codeplex Custom SharePoint Designer Workflow Activities.
These activities are also built-in to SPD2010.
To install the custom activities, please follow the steps as below:
Download the solution file form
Useful Sharepoint Designer Custom Workflow Activities
Copy the wps file to the Disk C.
Open the SharePoint 2010 Management Shell.
Run the command: add spsolution c:\ dp.sharepoint.workflow.wsp
Open the Center Administration, click System Setting->Manage Farm Solution-> dp.sharepoint.workflow.wsp->Deploy to one or more Web Application.
Open the SharePoint designer, add action from Custom Actions.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to copy List item from one list to another using SPD workflow using HTTP call web service

Hi,
How to copy List item from one list to another using SPD workflow using HTTP call web service.
Both the Lists are in different Web applications.
Regards, Shreyas R S

Hi Shreyas,
From your post, it seems that you are using SharePoint 2013 workflow platform in SPD.
If that is the case, we can use Call HTTP web service action to get the item data, but we cannot use Call HTTP web service to create a new item in the list in another web application with these data.
As my test, we would get Unauthorized error when using Call HTTP web service action to create a new item in a list in another web application.
So I recommend to achieve this goal programmatically.
More references:
https://msdn.microsoft.com/en-us/library/office/jj164022.aspx
https://msdn.microsoft.com/en-us/library/office/dn292552.aspx?f=255&MSPPError=-2147217396
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Load data from one Application to another in BPC NW 7.5

Hi
I have a requirement to load data from One application to another application.
eg. HR Plannning to CostCenter Planning.
I am aware of a method to load data using transformation file mapping source and target dimensions and run DM package and this works fine.
However, the challenge is if i try to automate this process then i will have to hardcode the application tech name and save as variant to use that in process chain. Now, if i hardcode the tech name of the application then it might happen that during full optimization the tech name might change and the automation load will fail.
so how to handle this situation? any standard practices available?
appreciate your inputs/thoughts.
Regards.

Hi,
Exactly. The main problem is that there is no statement to transfer the data. Please take a look at the below link from help.sap:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/f4/33f0bbc46c4a53860f1410f20ffb8b/content.htm
Since the structure of both the applications is same, you dont require add_dim or rename_dim, etc. However, you definitely need the when statement.
If you want to transfer all the records, then you can have something like
*WHEN ACCOUNT
*IS *
*REC(EXPRESSION = %VALUE%)
*ENDWHEN
Hope this helps.

How to Copy the PLD from one database to another

Dear Members,
i have designed the PLD for Purchase Order, i want to copy the particular PLD into another Database.
i tried to copy the PLD from one database to another through copy express.. i copied the PLD sucessfully. But the problem is,it copies all PLD's from one database to another. i want only the Purchaseorder PLD has to be copied in to another database.any body can help me in this regard.
With Regards,
G.shankar Ganesh

Hi,
select * into A1 from RDOC where Author !='System'
select * into A2 from RITM where Doccode in (select Doccode from A1 )
select * from A1
select * from A2
sp_generate_inserts 'A1'
sp_generate_inserts 'A2'
you will get Insert scripts of A1 and A2 tables .After that You 'll Replace A1 to RDOC and A2 to RITM.
So that you can RUN this SQL srcipts any where (In any Database)
but First u have to run sp_generate_inserts Storeprocedure(from websites) .
drop table A1,A2

Copying dimension members from on application to another in Hyp Planning9.2

Similar Messages

Maybe you are looking for