Copying standard script

Hi ,
i am copying standard script it is not allowing changes in language EN and also its not asking request and package . so i am facing after copying script its not allowing changes in windows .
how to resolve this problem.

first of all copy the script from 000 to 120
here is the procedure
SAP Script is client dependent.
So you can use SCOT transaction to copy Transport request of SAP Script from one client to another.
You can use program RSTXSCRP also to transport SAP Script from one client to another.
Or from SE71 as SE71-> utlities->copy from client .
You need to go to transaction NACE and replace standard SAPScript with your custom SAPScript.
Path: NACE -> Select EF (Application) -> Click Output Types button -> Select NEU (if you use standard one) -> Double click on Processing Routine -> Click Change mode -> Replace Medruck with your custom SAPScript -> Save.

Similar Messages

Problem in Sapscript , After creating a copy of Standard Script

Hello friends,
                   I have copied a standard script WASCHEIN into ZWASCHEIN, now all the data is coming from driver program SAPM07DR. Now there is one field which is not coming from the standard program,
                  Is there any way i can capture the field in my script without making changes in the standard driver program like a select statement in the script.
Thanks.
Edited by: Vijay Babu Dudla on Dec 16, 2008 3:24 AM

Hello Poonam,
Sorry i think you are not aware of using PERFORM stmts in SAPScripts !!!
@ Amit you can try this bit of coding:
/:           PERFORM F_GET_KTEXT IN PROGRAM ZPROGRAM
/:           USING &MSEG-NPLNR&
/:           CHANGING &V_KTEXT&
/:           ENDPERFORM
Create a Subroutine-Pool Program: ZPROGRAM where you write the FORM for the above PERFORM.
FORM f_get_cust_details
TABLES fp_it_input STRUCTURE itcsy
              fp_it_output STRUCTURE itcsy.
DATA:
l_v_nplnr TYPE nplnr,
l_v_ktext TYPE auftext.
READ TABLE fp_it_input WITH KEY name = 'MSEG-NPLNR'.
IF sy-subrc = 0.
    l_v_nplnr = fp_it_input-value.
ENDIF.
SELECT SINGLE KTEXT
INTO l_v_ktext
FROM aufk
WHERE aufnr = l_v_nplnr.
LOOP AT fp_it_output.                                     "#EC *
    IF fp_it_output-name EQ 'V_KTEXT'.
*     Modifying the output table with the customer number
      fp_it_output-value = l_v_nplnr.
      MODIFY fp_it_output.
ENDLOOP.
ENDFORM.
Please note that passing the USING / CHANGING parameters through tables of ITCSY structures is a standard way of doing this & you cannot change this )
Hope this helps.
BR,
Suhas
Edited by: Suhas Saha on Dec 16, 2008 9:39 AM

Copy of standard script

Hi all,
Is it possible to copying the standard script from client-000 to QA?
TKS in advance,
Dharani.P

hi
U can directly copy even without transporting it provided u have access to SE71 in Quality system .
if so goto Se71 ..Utilities-Copy from Client- enter the form name and target form name and F8 .. and activate the form ...
or else use Program (SE38 tcode) RSTXFCPY ..
if not do the same in DEVELOPMENT system and assign the form to a Package which will ask for Transport reuqest and move this to Quality
surya

How to Copy Standard form in Smartforms?

Hi Experts,
can anyone tell how to copy a standard form in Smartforms.
Thanks in advance

Hi Abdul,
We have to copy them to '800'. (this is your own company define client no)
All Standard Scripts and their respective print programs are listed in table 'TNAPR'.
Ex: FORM MEDRUCK has the Driver Program SAPFM06P.
NOTE: Never make any changes to the Standard Driver Programs
STEP 1.
Goto Transaction Code <SE71> and
select from Menu UTILITIES ->Copy from Client.
Enter the Standard Form Name, It source Client 000 and the target Form Name that you want it to be saved as on your client.
Say you are naming it as zmedruck1.
Click on EXECUTE.
STEP 2.
Converting form to English.
Open zmedruck1 in <SE71> With language DE.
Then goto UTILITIES -> Convert Original Language from DE to EN.
Then you can modify the layout for example, chaging the logo, or changing the headers, or adding any new code to do some calculation etc.,
SAVE THE CHANGES AND ACTIVATE.
Then select from the menu FORM -> CHECK -> TEXT.
SELECT your driver program name from the list adn click on COPY.
If you don't see the program name in the list then click on
'APPEND PRINT PROGRAM' and add your program name and then select it from the list and click on COPY.
STEP 3: Assigning our form to the standard print program.
Start Tr.Code <NACE>.
In our present case since we are working on 'Purchase order' we have to select EF and click on the button Output Types.
Then on Right hand side, scroll down and select NEU - New P O Printout.
(This may change for different programs).
Then Double click on Processing Routines on Left hand side.
Change from Display -> Change Mode.
Give your form name (zmedruck1) for printoutput and SAVE.
STEP 4:
Start Tr.Code <ME22N> since you are working on Purchase order and click on print Preview to make sure your layout etc., changes are OK. If not again you have to make the changes accordingly.
If every thing looks ok then you can print your form.
Regards,
Sathish:)

How to add new fields in sap copied standard form using itcsy structure

hi guys,
i want add some fields in sap script copied standard form using itcsy structure.
let me know the procedure with any example.
thanks,
anitha.

Hii anitha
plz c code below
Syntax goes like this
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
Example:
In script form
/: PERFORM READ_TEXTS IN PROGRAM 'Z08M1_FORM_EKFORM1'
/: USING &EKKO-EKORG&
/: USING &EKPO-WERKS&
/: USING &EKKO-EKGRP&
/: USING &EKKO-BSTYP&
/: CHANGING &COMPNAME&
/: CHANGING &SENDADR&
/: CHANGING &INVCADR&
/: CHANGING &COMPADR&
/: CHANGING &COVERLTR&
/: CHANGING &SHIPADR&
/: CHANGING &REMINDER&
/: CHANGING &REJECTION&
/: CHANGING &POSTADR&
/: CHANGING &LOGO&
/: ENDPERFORM
In program
FORM Read_texts - To extract the standard texts from the table *
FORM READ_TEXTS TABLES IN_PAR STRUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA : L_EKORG TYPE EKORG,
L_WERKS TYPE WERKS_D,
L_BSTYP TYPE BSTYP,
L_EKGRP TYPE BKGRP.
READ TABLE IN_PAR WITH KEY 'EKKO-EKORG' .
CHECK SY-SUBRC = 0.
L_EKORG = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY 'EKPO-WERKS' .
CHECK SY-SUBRC = 0.
L_WERKS = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY 'EKKO-EKGRP' .
CHECK SY-SUBRC = 0.
L_EKGRP = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY 'EKKO-BSTYP' .
CHECK SY-SUBRC = 0.
L_BSTYP = IN_PAR-VALUE.
CLEAR Z08M1_ORG_TEXTS.
SELECT SINGLE * FROM Z08M1_ORG_TEXTS WHERE EKORG = L_EKORG
AND WERKS = L_WERKS
AND EKGRP = L_EKGRP
AND BSTYP = L_BSTYP.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM Z08M1_ORG_TEXTS WHERE EKORG = L_EKORG
AND WERKS = L_WERKS
AND EKGRP = L_EKGRP
AND BSTYP = SPACE.
ENDIF.
READ TABLE OUT_PAR WITH KEY 'COMPNAME'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_COMP.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'SENDADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_ADRS.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'INVCADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_INVC.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'COMPADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_CPAD.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'COVERLTR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_COVR.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'SHIPADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_SHIP.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'REMINDER'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_RMDR.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'REJECTION'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_RJCT.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'POSTADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_POST.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'LOGO'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_LOGO.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
reward points if useful
regards
Jaipal

How to add material group in rvinvoice standard script?

how to add material group in rvinvoice standard script?
regards

Hi
You have to copy the standard script first .
you need to write External subroutine in layout.
This is just for basic info..you can search in sdn external subroutines in script..you get so many inputs.
Thanks

How to modify the standard script in scripts?

how to modify the standard script in scripts?

Nagaraju,
Standard scripts cant be modified.
Only thing is you need to copy it to z-form and have to do modifications as per ur requirements.
Here is the procedure to copy standard form to z-form.
goto SE71 t-code, then select the menu path : <b>Utilities -> Copy from Client</b>
then it will take to another screen, give the form name as Standard form name, if u r copying a stadard invoice means, type RVINVOICE01 and target form, ZRVINVOICE01. Now press execute button, it will copy the form into 25 languages. Now come back to se71, enter Z-form name and do the required changes.
Hope this hint may help you, Pls close the thread if u met with correct answer.
Regards,
Sujatha.

Modifications in sap-standard script

Hi,Can anybody tell me what do we do generally in modifying standard scripts,do we need to change the driver program ?
thanxs in advance.
anil.

If you are talking about output programs and SAPscripts, the idea is the following:
You make copy of the standard output program and also make copy of the sapscript. Then you perform your changes. The functional team needs to get involved to create a new output type, exa ZNEU for PO output as a copy of NEU. Then assign the new program and script.
Good Luck,
Leonardo De Araujo

Copying Standard SAPScript to ZSapscript...

Hi,
I want to copy standard sapscript to zsapscript.
I go in SE71 and enter the name of Z sapascript form and then create. Now when I go to Menu-> Form-> copy from: I give form name as MR_PRINT and give language as EN.
It says MR_PRINT LANGUAGE EN is not available in client 120.
But when I again go to se71, and type MR_PRINT with labguage EN in the same client, it dispalys the form but says MR_PRINT from client 000 dispalyed.
How do I resolve this ?
Do I need to copy the script from client 000 to 120 ?
How do I do this ?
Thanks.
Regards,
Thomas.

hi Rajesh,
first of all copy the script from 000 to 120
here is the procedure
SAP Script is client dependent.
So you can use SCOT transaction to copy Transport request of SAP Script from one client to another.
You can use program RSTXSCRP also to transport SAP Script from one client to another.
Or from SE71 as SE71-> utlities->copy from client .
then u can copy from standard to z
if u find it useful mark the points
Regards,
Naveen

Process to modifi the standard script

Hiiiiiiiii
can any body tell the complet process to modify standard script for eg for PURCHASE ORDER

Run the transaction scc1 and give the form name you want to copy and giev the client name you want to copy from , give the target name . and select the first check box if you want it copy in original language else select the second chewck box if you want to copy in all languages that source form has.
the same you will get in the SE71 transaction by choosing trhe path
UTULITIES---> Copy from client
Reward if useful
Regards,
Nageswar

How to transport standard script

Dear friends
i want to coppy standard script in to customized form
for that i went through program rstxscrp programs & exported standard script in PC but it was not transporting
can any one guide how to transport standard script
Regards ,
Reddy

Hi,
For uploading/downloading into different servers.
follow the following steps.
execute the program RSTXSCRP
for DOWNLOADING
1. select form radio button and enter the form name in Object name field and mode as IMPORT.
2. In ctrl parameters for file operation
select first radio button Form and give file path to down load and execute.
for UPLOADING
3. select form radio button and enter the form name in Object name field and mode as EXPORT.
2. In ctrl parameters for file operation
select first radio button Formand give file path to upload and execute.
for Copyinnto different clients
Go to SE71 > utilities-> copy from client-->give source form name and give target form name(Zform) execute.
Regards,
Raju.
Edited by: S Raju Shanigarapu on Aug 26, 2008 3:08 PM

Changing Standard Scripts

Hi,
Can anyone tell how to change the standard scripts?
pls give steps to change.
thanks

First go to SE71, then give a Name for the Z-form and copy the predefined form from UTILITES -> COPY FROM CLIENT.
Then open the coiped Z-form and save and activate.
This is the procedure for copying a predeifned form.
go to SE71 T code
enter the std script, display
from the second page Copy the script to the ZSCRIPT with EN as lang
and do the modifications in that Zscript and that has to be attached in the NACE t code for the related Output type and Driver program.
for example
for PO MEDRUCK is the std Script Copy it to ZMEDRUCK and do the changes.
then in NACE select the output type NEU and attache it to SAPFM05P program and remove the MEDRUCK and keep ZMEDRUCK.
Modifying SAP Forms
If you want to modify SAP forms, set up your development environment as follows:
Make sure that no SAP-standard forms are stored as client-specific copies in your development client.
Such forms should be held only in client 000, the SAP development and installation client. If you access an SAP-standard form from another client, then the central copy in client 000 is used.
If you need to remove SAP-standard objects from your development client, see Notes 10388 and 3355 in the SAP Online Service System (OSS). These notes explain the procedure for saving modified forms and then deleting all forms.
To modify SAP standard forms,
Copy the forms you need from client 000 to your development client.
Rename the forms using a name from the customer name reserve (names starting with Y or Z).
Copy the forms to one of your own Y or Z development classes.
Renaming the SAP standard object makes it possible to manage and transport your changes with the SAP workbench organizer. The organizer is not activated for SAP-standard objects that are modified in clients other than 000.
To put your modifications into effect, you must also modify the ABAP print program used to print documents that use this form. You should rename such print programs and store them in your own Y or Z development classes.
You can use the SAP Customizing System to replace the SAP print program with your modified print program in the affected applications.
Forms: Concepts
Forms are used to control the page layout and also the text formatting in your documents. Before formatting a document for output to the screen or to a printer, you must assign a form to it. If you do not specify a form for a document, then the SYSTEM form is assigned to the document by default.
Application-specific forms are used in SAP applications to specify the page layout for such special documents as invoice or checks. These forms specify the structure of the information on the page(s) of such a document. They define, for example, the address header, item lines, the footer, and so on.
There are two ways to format texts with forms:
In the standard SAPscript text processing (Tools ® Word processing ® Standard text), you can select a form for a document. You can then type text into the main window of the form and output the document in the format defined in the form.
For example, you can select a form for a letter. You can then type the body text of the letter in the main window. When you print the letter, the default text elements in the other windows of the form (heading, footer, and so on) are printed with the body text.
A document can be generated by a print program in one of the SAP applications. The print program uses a form to generate the document. Most correspondence and document generation in the SAP System are handled by way of print programs.
A print program selects the text elements that are to be printed in the windows of a form. It may also collect information from the user or ask the user to input text directly, as in some correspondence functions. The print program may also provide data for variables defined in the form.
Finally, the print program uses the form to format the document for display or printing.
Check this link...
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/802d7d454211d189710000e8322d00/frameset.htm

Urgent : Copy CATT Script / Testcases across server

Hi Experts,
I want to Copy CATT Script / Testcases form one server to another(servers having same versions)
and also I want to Copy CATT Script / Testcases form one server to another(servers having different versions)
please help me.
Regards,

hi,
I think that CATT scripts/testcases are repository objects thus these can be transported to the required servers using the standard transport request by using the change and transport system.
Regards.
Sourabh

How to convert standard scripts to y or z

Hi Guys,
How to find out and conver standard scripts to y or z?

Hi..
Tcode Se71.
Utilities-->Copy from client..
Formname = > Standard Form name or custom Form name
Source Client => Give current login client.
Target form Name => Z***
Check Original language check box.And Execute
Hope it will helps.
Regards
Bala.

How to know the printprogram and output type for perticular standard script

how to know the print program and output type for perticular standard script and wt the proceure we will fallow to modifie the standard script..if possible u have any sample code plz share with me.....

Hi Phani,
To know the print program and output type for a standard script we have a table called TNAPR. So just you go to SE11 and provide the table name as TNAPR and choose display option.Then go with display entries option and in selection screen you have to provide the form name for whic you want to know the print program and output type.
To modify a standard script first of all you have to copy the standard form for which you need modifications into Zform. Once you done this you can modify the layout set as per your requirement.Then what ever the modifications you have done in layout set for that you need to populate the data.For this you also need to do some modifications to the print program.so you have to options like directly you can modify the print program as per your requirement and other one is you can create a subroutine and do coding in that subroutine. Then you need call this subroutine in the Script Form.like this you can do modifications to the standard script........................... Reward me if its helpful..........
Thanks & Regards.
Laxman.P
B'lore.

Copying standard script

Similar Messages

Maybe you are looking for