How to add material group in rvinvoice standard script?

how to add material group in rvinvoice standard script?
regards

Hi
You have to copy the standard script first .
you need to write External subroutine in layout.
This is just for basic info..you can search in sdn external subroutines in script..you get so many inputs.
Thanks

Similar Messages

How to add customer group(KNVV-KDGRP)in the standard report?

Dear All,
My customer requirment is that Customer group (KNVV-KDGRP)wise should be run in FBL5N report AND Customer group should be shown in FBL3N report.
how to add customer group in the standard report?
thanking you,
regards,
Rupang shah

Hi,
This is what I did for FBL5N with a developer because additional fields configuration does include certain tables.
BTE1650 available for FBL5N and add a new field into one of those tables as an append structure and then use a BTE to populate the field for FBL5N.
Hope that this helps
Kind regards

How to add Material type(MTART) field on Selection screen of MB5B transaction code.

Hi All,
    Please let me know how to add material type field on selection screen of MB5B transaction
For that i made copy ZMB5B_COPY of original report RM07MLBD.
Thanks in adv .
Samadhan

Hi,
Once you copied the standard report to Z report, you can MTART in selection screen like below.
and in order to inlcude the same in programming logic, we have three option.
1) Check all related select queries, and include MTART in SELECT query using inner join with MARA.
2) In START-OF-SELECTION event fill MATNR as shown below.
3) If user entered any value in MTART, then before displaying the report just check material type of each material in the final internal table(which is used to display report) delete enteries from internal table accordingly.
START-OF-SELECTION.
IF MTART[] IS NOT INITIAL AND MATNR[] IS INITIAL.
    SELECT MATNR FROM MARA INTO MATNR-LOW WHERE MTART IN MTART.
      MATNR-OPTION = 'EQ'.
      MATNR-SIGN = 'I'.
      APPEND MATNR.
      CLEAR MATNR.
    ENDSELECT.
ENDIF.
The above option has one limitation: The selection screen variables has some restriction, please read the below thread.
Facing problem in select statement dump DBIF_RSQL_INVALID_RSQL CX_SY_OPEN_S
Getting Dump in the select query has more than 2000 entries
Hope this will work for you .
regards,
Rajesh Sadula.

How to add new group entry in Cisco Vpn using powershell

I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test'
$username = 'TestUser'
$userPassword = ConvertTo-SecureString -String "Password" -AsPlainText -Force
$credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist
$username,$userPassword
$password = $credentials.GetNetworkCredential().Password
Set-Location 'c:\Program Files (x86)\Cisco Systems\VPN Client'
.\vpnclient.exe connect $vpn_profile user $username pwd $password
Write-Host "You Are Connected"
cd "C:\"

Have you entered .\vpnclient.exe /? to see if it will return information about other switches you can use with this executable? Other than connect, I was able to track down a few without actually having the executable (http://www.scribd.com/doc/40108893/Cisco-VPN-Client-Command-Line).
That said, I do not believe that there is a switch that will help you create a connection. These are either done manually through the GUI, or can be likely be added by supplying a properly formatted file in the proper place.
If you're using the version of the Cisco VPN client I think you are, then your connection settings, or profiles, are stored in individual .pcf files somewhere on your computer (likely in the Cisco directory). These are simple, text-based files. Find one
on your computer, save it with another name, and then modify it manually. If you really want to use PowerShell, then use this opportunity to learn how to create and edit basic text files using PowerShell. If you have a standard connection file, then you can
put that file onto remote computers any number of ways. If a .pcf file exists in the proper place when the VPN client is opened, then it likely will not prompt for a new connection.
Update: Added more info; clarified

How to add new text field in standard report

how to add new text field in standard report?

Hi,
I presume you are talking about a report display in ALV and u wish to add a column to it .
If it is a global requirement ,as in table being used there in ALV can be modified, then you can append the table and the system should pick up the same automatically from there.
Otherwise , you can make a Z program . Modify the catalog being used in ALV.
Regards,
Shweta

How to add new customise field in standard SAP ME28 Report?

Hi Anybody,
How to add new customise field inside Standard SAP Screen report ME28?.
Anybody, Please tell me how to do?.
Thanks,
Regards,
S.Muthu.

Hi Subramaniyam,
You can find enhancement in me28 by following steps and then apply your logic in include of this enhancement.
cmod>Give a project name>in enhancement column give the package name ME >f4>in package write ME-->ENTER>It will show you all enhancements available in me28> find which ever suits your requirement>save > click on components> from there you can make changes in include program.to add that particular field.

How to add one column to the standard t.code : CAT2.

Hi,
How to add one column to the standard t.code : CAT2.
thanks

Hi Chinna
see the enhancements by using SMOD <b>CATS0007</b> , or <b>CATS0012</b> and create a project using CMOD and you can implement your requirement.
Hope This Info Helps YOU.
<i>Reward Points If It Helps YOU.</i>
Regards,
Raghav

How to add a custom code to standard sap menu

Hello guru,
will you please explain me how to add a custom code to standard sap menu?
thanks in advance.
Best regards.
juan

Hello juan,
with SE43N you can add custom transaction codes to the existing menues.
see http://help.sap.com//saphelp_erp2004/helpdata//EN/00/783b377bfdcf61e10000009b38f936/frameset.htm
regards
johannes

How to add Material photo in SAP

Hi folks,
    Does anybody know how to add material photo to material No?
     As now, when our old spare parts are bad, maintanance user have to find a new one to replace, so they need to provide the material No to warehouse user or purchase dept.
    But now as there are a lot of spare parts in SAP, iIt's difficult for them to appoint SAP material No from layout, so we want to add photo to material No.
Great thanks!
Li Jing
Edited by: Li Jing on Apr 2, 2010 12:14 PM

When viewing material, from main menu select System > Services for Object.
You may get a choose object type option, if you do, choose a std way to work e.g. always use Object = Material.
You'll then get a mini free floating toolbar. Select the far left Icon and Create an attachment. Navigate to your picture and upload.
To view the picture, select the Icon second left (this is greyed out if there are no attachments).
You can attach any number of pictures or Word documents etc.
Regards,
Nick

How to add field value to the standard table

Hi,
How to add field value to the standard table?
for example:
when we go to TCODE SE16-> VBAK table -> on the selection screen if we press F4 against VBTYP we get all the available values for that field. How to add a new document Category value to this field so that it shows up in F4 help for that field.

Hi Asif,
I don't think it is possible and feasible for adding new field value to the field VBTYP because it is not possible through SPRO.
If u see the domain of this field VBTYP we have fixed values provided by SAP. There is no value table for this. If u have value table then it will be updated through SPRO. But still if u really want to add some value u can do that by getting access key and add the value in the fixed values of the domain. But of no use other than simply displaying in F4. Because for what ever value u created here there will be no documents in VBAK or any table using this domain.
Hope this is clear for u.
Thanks,
Vinod.

How to create material group hierarchy ?

Hi,
I would like to know how to create material group hierarchy in ECC 6.0
Thanks in advance for your help,
Kind regards,
Yann

Hi ,
The material group hierarchy and product heirarchy is used in SD of ECC 6.0 . These can be created in Logistics General -> Material Master-> settings for Key fields--> Data Relevant to Sales and Distribution-> 1)
define product categories
2)Define material groups
But If you want to make of use of this in SRM ,I won't think it is available . I guess Probably this is avl for CRM .
Regards
Mani
Message was edited by:
Manikanda Ilango S.

How to add administrator group to weblogic user

Hi All,
How to add Administrator Group to weblogic user if weblogic user is accidently removed from Administrator group.
Weblogic version is 10.0.1.0.
Thank you in Advance!!!
Cheers,
Ankur

http://docs.oracle.com/cd/E21764_01/apirefs.1111/e13952/taskhelp/security/ManageUsersAndGroups.html

How to add a page in the SAP Scripts

Hi All,
I want to know how to add a page in the sap scripts. there is already sap script developed by some other person.
Now I have to add a page in front of that and have to add some more data.I added a page in page windows but thats not at all working.
Please help me out in this.
Thanks,
Praveen

new page will create in sap scripts using new page command.
you have to set condition like after some number of records displayed in page new page has to be trigger.
ex:YOU HAVE SO MANY RECORDS FOR PRINTING BUT YOU WANT TO DISPLAY 100 RECORDS IN FIRST PAGE REMAINING IN SECOND PAGE LIKE THAT.
Here you can use NEW PAGE COMMAND .
IT IS OPPOSITE PURPOSE OF PROTECT AND ENDPOTECT.
Reward if useful.

How to add a report into the SAP-SCRIPT .using PERFORM ......ENDPERFORM

My question is that How to add a report into the SAP-SCRIPT .
by using PERFORM ......ENDPERFORM
I don't know how to used it .

Hi Sandeep,
Please check this link
http://help.sap.com/saphelp_40b/helpdata/en/d1/803279454211d189710000e8322d00/content.htm
http://www.allinterview.com/showanswers/37425.html
Calling ABAP Subroutines: PERFORM
You can use the PERFORM command to call an ABAP subroutine (form) from any program, subject to the normal ABAP runtime authorization checking. You can use such calls to subroutines for carrying out calculations, for obtaining data from the database that is needed at display or print time, for formatting data, and so on.
PERFORM commands, like all control commands, are executed when a document is formatted for display or printing. Communication between a subroutine that you call and the document is by way of symbols whose values are set in the subroutine.
Syntax in a form window:
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
FORM <form> TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
ENDFORM.
The values of the SAPscript symbols passed with /: USING... are now stored in the internal table IN_TAB . Note that the system passes the values as character string to the subroutine, since the field Feld VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR 80). See the example below on how to access the variables.
The internal table OUT_TAB contains names and values of the CHANGING parameters in the PERFORM statement. These parameters are local text symbols, that is, character fields. See the example below on how to return the variables within the subroutine.
From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (u2018First pageu2019, u2018Next pageu2019, u2018Last pageu2019) is printed as local variable symbol.
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY u2018PAGEu2019.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018NEXTPAGEu2019.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018BARCODEu2019.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = u2018|u2019. "First page
ELSE.
OUT_PAR-VALUE = u2018||u2019. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = u2018Lu2019. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
Best regards,
raam

How to ADD Materialized Views to Refresh Group

Hi,
My requirement is, i want to refresh MVs(fast refresh only) by using DBMS_SCHEDULER. For this i have created one DBMS_SCHEDULER job like below.
BEGIN
DBMS_SCHEDULER.CREATE_JOB (
JOB_NAME      => 'REFRESH_MV_UPLOAD',
JOB_TYPE           => 'PLSQL_BLOCK',
JOB_ACTION      => 'DBMS_REFRESH.REFRESH('MV_UPLOAD_GRP');',
REPEAT_INTERVAL      => 'FREQ=MINUTELY; INTERVAL=30',
ENABLED      => TRUE
END;
In the above script, i created one refresh group 'MV_UPLOAD_GRP'. So what my requirement is i want to ADD my MVs refresh scripts to this group. Scripts as below...
Refresh MV Scripts:
1) Exec dbms_mview.refresh('emp.entity', 'f');
2) Exec dbms_mview.refresh('emp.identifier', 'f');
3) Exec dbms_mview.refresh('emp.rating_hist', 'f');
. so on.
Can anyboy help me how to add these scripts to refresh group 'MV_UPLOAD_GRP'.
Regards
Raj

ALL_REFRESH and ALL_REFRESH_CHILDREN
http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarsnapviews.htm#REPMA027
Nicolas.

How to add material group in rvinvoice standard script?

Similar Messages

Maybe you are looking for