Corba C++ client: what's needed?

IHAC that has a problem related to the client ORB:
they developed a C++ corba client, running on WinNT, and C++ corba servers
running on Solaris.
They tried to install the WLE client only, on the NT machine, but they say
it doesn't reach the server unless they install also the whole WLE server on
NT.
Can anyone suggest a solution?
Thanks in advance,
Luca

Gordon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

I've designed a magazine prototype for a client and I need it to flip pages like a book on an i-pad. What software will do this?

I've designed a magazine prototype for a client and I need it to flip pages like a book for her sales team to show on ipads. What software will do this?

The max OS for all Macs with a PowerPC processor is Leopard OS 10.5.x.
If you are going to consider getting a newer, but used, Mac, here's the requirements for Lion.
Lion 10.7 System Requirements
    •    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor (most models released since late 2006 - early Intel-based Macs with Core Solo or Core Duo processors aren't compatible)
    •    2GB of memory (recommend at least 4GB -- and ideally even more, as you'll see benefits in many computing tasks)
    •    OS X v10.6.6 or later (v10.6.8 recommended) for Lion download from Apple App Store; or Leopard 10.5.x if using Lion on USB drive
    •    7GB of available space (10GB recommended)
 Cheers, Tom

My client with autism needs to be able to speak/sing into a microphone and simultaneously hear his voice through a headset, preferably with reverb set on high. Is it possible to do this with the iPad and OS7? If so, what setup do I need?

My client with autism needs to be able to speak/sing into a microphone and simultaneously hear his voice through a headset, preferably with reverb set on high. Is it possible to do this with the iPad and OS7? If so, what setup do I need? I have a SM58 type mic and-over-the ear headphones.

This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference.

BEFW11S4 for Bridge/ Repeater/ Client/ What- exactly- do- I- need- really?

I have a BEFW11S4 (hooked up to a DSL Modem) as the basic router/hub of my home network. I have a laptop that connects wirelessly, but all the other machines in my network (e.g. a network printer) are wired into the BEFW11S4.
I would like to wire up some more machines to a switch in another room, and hook up this network to my main network wirelessly. That is, this new group of machines needs a gadget that can talk wirelessly to the BEFW11S4 in order to extend my home LAN, and allow any machine on one wired segment to access any machine on the other wired segment.
First, a question of terminology: what do I need? A Bridge (whatever that is, and what is it anyway)? A Repeater? A Client? Something Else?
Second, implementation: What gizmo will do what I need, and how do I configure the BEFW11S4 to work with it?
I note, for example, that with the later versions of firmware (I have 1.52.02), there does not appear to be any way to determine the Wireless MAC address of the BEFW11S4 (I can only see the WAN address and the wired LAN address). This observation was prompted by a reading of the manual of a product of a competitor, which basically said that such an address would be needed for the setup of their equipment as a Bridge-or-Repeater-or-Client (I don't know which as the descriptions left me completely in the dark about the differences.)
Thanks!
(Edited subject to keep threads from stretching. Thanks!)
Message Edited by JOHNDOE_06 on 10-15-2008 07:43 AM

You want a wireless bridge like the Linksys WETs.
You can also get a versatile wireless access point which can be configured as wireless bridge like the Linksys WAPs.
For a standard wireless bridge (i.e. linking a wired LAN through a wireless link to an existing LAN) you don't need the MAC address of the main access point. All you do is setting up a standard client connection to the access point. A WET will you to scan the environment for networks and it will list all networks including the MAC addresses of the access points. Any wireless network scanner like NetStumbler will also show you the mac address if you need it.
You only really need the MAC address if you want to set up a wireless distribution system (WDS). This is when you want not only a simple wireless bridge but a roaming wireless network and the bridge at the same time. A WDS access point will connect wireless to the main access point. The WDS access point will also accept incoming client connections and repeat those signals to the main access point. As you can have multiple WDS access points you have to set up the topology of your wireless network by defining the access points to which they should actually connect to. But for your purposes you won't need that.
You should also be able to guess the MAC address simply by looking at the WAN and LAN interface MAC addresses. Usually, the MAC addresses of the WAN, LAN and wireless interfaces are in sequential order.

Hello - I have done a series of edits on premiere cs6 and now need to transfer info to the client overseas so I have to transfer the rushes and would like to know what I need to provide ( list...) regarding the edit done on the CS6 version - thank you

hello - I have done a series of edits on premiere cs6 and now need to transfer info to the client overseas so I have to transfer the rushes and would like to know what I need to provide ( list...) regarding the edit done on the CS6 version - thank you

>I have managed to download the footage onto Picture Motion Browser
Isn't Picture Motion Browser available for Windows only? If so, why are you posting in an Final Cut Express forum? My apologies if I'm incorrect.
-DH

How to invoke A CORBA-Java Client Application, from Oracle???

Hi,
I have a CORBA-Java Client Application, which takes the input parameters from a Oracle table and calls the CORBA Server, passes these parameters to the C++ Server Application and gets the results back thorugh CORBA.
My problem is, this java application needs to be invoked, when ever there is a new record in the Oracle table.
I am not sure if i can use Java Stored Procedures in Oracle in this case, because my app is in Sun JVM and i am using BEA WebLogic Enterprise 5.1 for the CORBA.
Is there any other way by which i can invoke this app, when a new record is updated in the Oracle table?
Currently, i have just put a TIMER in my java App, to check the oracle table in every few seconds, to see if there is a new reocrd. If it finds a new record it invokes the corresponding class(corba class), or else just keep sending a messsage that no new record is available.
The problems i am facing in this method are as follows;
1. Unnecessarily, the application has to keep on running if there is no request coming frequently.
2. When there is a new record found, the Corba Class is called and the whole process (till it gets the result back from the server) takes about 20 - 30 secs. But within this period, if there is another record coming into Oracle table, my timer class doesnt invoke another corba class....(though i am using multithreading by using the RemidTask method in the timer.schedule.
(timer.schedule(new RemindTask(),10,5*1000);)
3. Also, if during the first call, there is some error, then the whole process exits, instead of another process running parallely (when a second new record is found).
So how does this timer class act like a multithreading process?
Well, i hope i am not confusing....Please let me know if anyone wants bit more elaboration on this.
It would be really helpful if someone can suggest some answer to my problem.
Thanks in advance.

Thank you very much Keith.
Though i am really getting a hope of solving this problem, from you answer, i am actually not 100% sure if i understood your reply properly.
First of all, about
1. "use the update stored procedure to place the updated record (or unique index) onto an Oracle Application Queue."
-- Why do i need to put the record in the AQ. (Frankly speaking, at this moment i dont have much idea about AQ, probably i can learn more about it from oracle technet site? Or would u suggest anything else?)
Then,
2."Your app then waits on this queue and for each new message, consumes it, gets the data required from the AQ load (e.g the index and or record), and fires off the CORBA class"
-- How does my application stay in the queue? and gets the data from the queue?
Of course, as far as i understand, i am going through the same principle...keeping on running a timer class, which keeps on checking the table for a new record, and when it finds, it calls the CORBA class.
Of course, i feel there should be a difference in running the timer continuosly and staying in queue. However i am totally unaware, how can i make my java app to wait in the queue and waits for a new record?
Can you please elaborate your answer a bit more, because i dont know about the AQ, that you have mentioned.
Thank you very much in advance for your time. But please know that it will be of great help to me and hence will be higly appreciated.
Regards,
Subhasree.

FCP 5 export to .AVI for Windows client? Advice needed!

I have a Windows platform client that wants my Exported FCP 5 Sequence in .AVI format.
Obviously, I normally always use Export to Quicktime Movie in FCP, and I do know that their is not a direct choice in FCP to export/convert as an .AVI file. (I usually hand off the FCP file to another facility that does DVD Studio Pro authoring work, and haven't had a need to make different file formats).
This has made me to ponder of few bits of info, that I'm sure I could get great ansers to, here.
My normal "workaround" for making an .AVI for a Windows user is to Export as Quicktime Movie in FCP, like normal, and then open that exported file in Quicktime Pro, and use Export Movie to AVI in Quicktime Pro. Is this the best method? Secondly, I am a little unsure as to the best settings I should use in QT Pro to achieve this. For example:
I just did a routine NTSC 48k,16 bit stereo, 30 second ad in FCP, and my normal, Export to Quicktime Movie was about 260 meg in size for the finished, self-contained movie file.
I opened this in QT-Pro and ran Export to AVI. In the settings dialog, I chose "uncompressed" for video and 48k-16 bit stereo for audio. The resulting export was about 680 meg in size! Because of file size restrictions for the clients product, what settings change or choice should I be making in QT-Pro to get an "equivalent" of the 260 meg file the FCP is exporting? Should I not get an equal file size of the QT-Pro AVI versus the FCP export (both 260 meg?).
If the answer is compression, what is the best settings in QT-Pro? Cinepak? Intel Indeo?
Perhaps, I have always misunderstood what FCP Export to Movie is giving me, but I thought that was uncompressed video? If so, why do I get the 260 meg out of FCP, and then 680 meg from QT-Pro Export to AVI (uncompressed) for the same 30 second clip? Is it simply a data rate difference?
Lastly, I have actually had a Windows user take a FCP Export to Movie file, straight from me, and they say it opened fine in Windows Media Player as is for viewing. However, there is no (dot) file extension name on the end of the filename. They can simply click File/Open in Windows Media Player and choose the "unrecognized" file because of no extension, and play it just fine to at least view the clip.
So what exactly is the file type that FCP is creating? It's not a .MOV and not an AVI file. What would be the equivalent file type association (just for my curiosity).
Thanks for any help to the above as I value the more-experienced users here.
Wade

Hi Wade,
Sorry for letting your post unanswered for two days, we were all busy (I know, it is not an excuse).
Seriously, I think the reason you are not getting answers is you have asked too many questions in one post. Don't know about others, but I get slightly confused.
Let me tell you what I do with FCP material when I send it to our sound department where they work with Nuendo on PCs. I export sequence using QT Conversion. My settings are: Format - AVI, Compression type - DV-PAL, Compressor quality - Best. I do not bother much about the sound. I sent the resulting file over network to a Maxtor FireWire external drive connected to a colleague's PC and then take the drive down to the sound guys. If the AVI file is smaller than 2 GB I can burn it to a DVD and a PC can open it, if it is larger, PCs cannot open. Also, the sound guys ask me not to use Cinepac, they do not like it. Therefore, I use DV-PAL; I guess you may safely use DV-NTSC but it depends on who will open the AVI file. Ask your client what it wants.
I think my routine is a bit more streamlined than yours - I export straight from FCP and do not bother with QT. You are wrong in saying that there is no direct way in FCP to export AVI.
Hope this is a starter for more answers. Also, have you tried searching the forum? I am sure all the answers are already there.

Does oracle have a solution for what i need?

Can anyone help because i am confused about Oracles offerings!
In my organisation where use Staffware v9 (now TIBCO, and not the iprocess engine) as the workflow backbone. Relatively simple process maps with background steps calling SQL code to perfom updates and return case data variable settings and foreground steps mapping to oracle forms. v9 is client server with limited API set so uses DDL calls with parameter passing and timers to communicate, but used the better API interfaces in the past. Currently on Oracle 10g at the moment, plans to go to 11g, but not holding my breath on this as we would need some infrastructure changes.
The client server nature of the TIBCO product and the fact that it uses flat files for transactional processing means that it is no longer suitable for our needs, and i want to replace it with an alternative. As we are an oracle shop, a suitable oracle product would be ideal, but unlike the (admittedly sparse) documentation on the old oracle workflow, the new stuff confuses the hell out of me as it seems so wrapped up with SOA concepts (something we are NOT interested in at the moment) and with the addition of some what conflicting BPM and BAM tools as well, there also seems no clear direction. TIBCO also want a lot of money to go to the new product
What i need is a tool to do the following
1) define users, access levels, group work queues with membership and supervisors
2) graphical process designer that can define PL/SQL interface steps, make available foreground tasks in the appropriate queues with APIs to access from the forms environment
3) workflow process management objects like
- decision based process routing on rule or data values
- sub procedure definitions
- external event APIs to control flow and update case data
- branching, joining and wait joins
- rules engines and dynamic process definition nice to have, but not critical
4) operational API for case starting, event issue, audit trail access etc.
5) APIs and repository held in the database
6) externally accessible database structure (ie: makes sense in sql) for reporting/management
I have worked with workflow systems for way too many years (years ago i was even on the Staffware advisory panel) so well up on how these systems work, and think that all of the above is pretty basic stuff, but (maybe just getting old) i cannot see how oracle are meeting what i see as the basics
any ideas?

I agree workflow is not SOA (Service Orientated Architecture). Oracle's strategic direction is BPEL / BPM, and Oracle workflow is moving to end of life.
BPEL is part of SOA Suite but you do have the option to buy standalone, it does have a prerequisite of weblogic suite though.
Although Oracle markets the product SOA Suite it does not mean you you have to develop a SOA architecture, you can still develop point to point interfaces as you do in workflow. SOA Suite just enables you get more reuse out of your existing systems, and future developments. If you want you can keep you workflow develop as it and integrate BPEL / SOA Suite with it.
Im sure you are very skilled in workflow but these skills are becomming very hard to find. They require strong PL/SQL skills and typically don't work with any other application or database without doing some customization. The fact that there is limited documentation shows that it is going to be difficult to upskill developers.
For the functionality Oracle provides in its BPM and SOA Suite I would say it is cheap, especially against our competitors. Also the more you buy the cheaper it gets.
cheers
James

Not sure how i should go about creating this flash to accomplish what i need.

First let me start by saying my flash file is currently 740kb
in .swf form and I'm not done with it. I'm taking this which was
developed from another developer and trying to customize it to work
for what i need. The flash was bought from template monster. I'm
using actionscript 2.0 in the flash.
Is 740kb big for a flash file that is basically an entire
website?
I'm trying to make this flash load as fast as possible while
implementing the best practices so i can use it for future
projects. Also i would like advice on using various techniques to
accomplish some functionality.
The flash file i'm working on is basically like a brochure
for a client. It consists of "8" main pages, along with several sub
pages.
I have the following questions though.
1. Currently the navigation is on the left hand side, and has
a mouse over animation as well as sound effects with rollover and
being clicked. The mouseover effect just moves the text to the
right a little and brings it back to the original position..
However each button in is an individual movie symbol.
- Should I consolidate the navigation so it's one movie
symbol instead of 8 movie symbols on one page? Keeping in mind that
even if i do make it just 1 symbol i might need to add the 8
navigation movie symbols into that one to maintain the animation.
- Should the buttons even be movie symbols or is there a
better way this should be done?
2. Because of the text for each page, I was using adobes
built in scrolling component for the dynamic text boxes.
Considering there is more then 8 dynamic text instances converted
to graphic symbols.... Is there a more efficient way of doing this,
or is the above method just fine?
3. The flash file contains a photo gallery. Currently all the
images from the gallery are in the same flash file. I was thinking
it would be more efficient to load the images in the gallery from
external .swf files. However i'm not sure if that would be the best
method, and i'm also not sure how to correctly accomplish within
standards.
4. I would like to implement a contact form within the flash
so users can contact me.
5. I would also like to have a testimonials page where users
can submit testimonials. However i'm not sure how to create the
form, but i had an idea on displaying the text in the flash using
xml so it can be easily updated . Just not sure on the proper and
more efficient way of doing this.
6. I would also like an event calendar that displays within
the flash. Was thinking of having this loaded from an external .swf
file as well. Would like the calendar to be xml based so I can
update it myself. Don't need nothing advance, just something that
says "Busy", "Not Busy", and "Book" which would just take them back
to the contact form to book me.
I know many of you don't know who i am, but I would really
appreciate some assistance. Whether its sample flash files, links
to tutorials, advice, anything.
I really want to do all of the above, but also as i'm
learning i would like to make sure i'm doing the above in the most
efficient way possible and up to standards while also keeping the
size low. Would like to do it right the first time, so as i
continue making flash files in the future I'm not writing sloppy
actionscript coding, having sloppy timelines, and or having sloppy
structure in my .fla files.
Also i know alot of you are very busy people, and i'm not
asking for you to do the flash for me but any and all help will be
very greatly appreciated.
Thank you in advance for you comments, advice, and replies.
:)

Wow, you're really looking to get your money's worth here. :)
I haven't read through your entire list of questions, but
I'll do what I can to help - others here will probably have
different ideas, so feel free to pick and choose which (if any - or
all) you want to integrate.
1. So far, my experience has been that the people that create
the templates on TemplateMonster have a pretty good handle on what
they are doing, and have done what they do for a pretty good
reason. Unless you are quite good at ActionScript, I probably
wouldn't make any major changes to the back end. After all, you
bought the template for a reason. If you want to move the buttons
around the stage, great - edit them to change the colors, great.
But to try to create a button array may be more than you want to
bite into here. That said, it can be done. I've done it. If you
want a sample of the code, drop me an e-mail and I'll send it to
you. FYI: I only do AS3.0 at this point. If your template is in AS2
then one of the other Flash gods would be better suited for code
samples.
1a. The buttons are movie clips for a reason - flexibility.
Leave them as movie clips unless you really like migraines.
2. I hate having to convert text to symbols, but sometimes it
is the most efficient (or only) way to do things. If you want to do
any tweens with the text, it has to be a symbol.
3. You can load the photos from external SWF's or you can
load the JPG's directly using XML. If you are using AS3, I know
that there is tight, simple integration with XML. I'd review a
couple tutorials on XML from some place like www.tutorialized.com
to get a feel for it. Also, look up "Working with XML" in the Flash
Help file (F1). Once you have decided on an approach, come back
here with specific questions and you will get good answers.
4. Doable. Search these forums for "Email from Text Box".
This was covered several times in the last couple of days.
5. XML is one option. You can even have XML give a photo of
the person doing the testimonial and load it all into a single
page. What you can do with this is limited only by your
imagination. This is a very broad question.
6. Someone posted a message about a calendar on here today.
Search for "Calendar" and I'm sure you will get some ideas from
there. Also (and again) www.tutorialized.com is a great resource
for general code and ideas.
You're right, we don't know you. And guess what? That doesn't
matter. We are equal opportunity abusers here. :) I mean that with
the kindest grin.
The things you have asked are very broad in nature and
therefore are quite difficult to give specific answers. We are
always happy to help you when you get stuck, and even to spend a
great deal of time walking you through a specific topic. However,
what you've asked here would take a six-week course to answer to
the level you will need. Grab some free code. Try it out. Play with
it. Break it. The Flash gods will rescue you. But remember, the
more specific your question, the better answer you will get.
I hope this helps (at least some).

Which oracle client do I Need?

I need to connect to vision instance on a remote server using my machine. I came to know that I need to have oracle client installed on my machine.
Can someone clarify which oracle client do I need? I am running on windows- XP on NT Server. Version of Vision instance is 11.5.10.2.
I appreciate for your help. URL Link should be great.
This is what I download and unzip to C:\Oracle\instantclient_10_2.
instantclient-basic-win32-10.2.0.3-20061115.zip
Is it the correct one?
Thanks.

Your setting
-Doracle.net.tns_admin=/usr/local/oracle/oas03/network/admin
is ok if this directory contains the correct tnsnames.ora file.
I have done some poking around, and I suspect that you use an old JDBC driver.
I have written a sample Java program that tests a connection with java.sql.DataSource using JDBC thin and tnsnames.ora, and it works fine with Oracle 10.2.0.3 but fails with Oracle 10.1.0.5 with exactly the error message you get.
The property oracle.net.tns_admin exists only since Oracle 10g R2 (see Metalink note 333686.1).
With 10.2.0.3 I was not able to reproduce your error message, when I set a wrong oracle.net.tns_admin I get "Io exception: could not resolve the connect identifier", and when I omit the property altogether, I get "Io exception: Unknown host specified".
Please double check if Vision uses the JDBC driver you think it does!
Yours,
Laurenz Albe
PS: maybe the test program is useful for somebody. I will post it:
* Test a DataSource connection with tnsnames.ora
* Usage:
* java -classpath .:/oracle/dir/ojdbc14.jar -Doracle.net.tns_admin=/tnsnames/dir tnsname user password
public class DataSourceTest {
public static void main(String[] args) throws java.sql.SQLException {
if (3 != args.length) {
System.err.println("Usage: java DataSourceTest <TNS-Name> <user> <password>");
System.exit(1);
// enable the following for trace output
// need to use ojdbc14_g.jar for this
/* java.util.logging.Logger logger = java.util.logging.Logger.getLogger("oracle.jdbc.driver");
logger.setLevel(java.util.logging.Level.FINEST);
java.util.logging.Handler handler = new java.util.logging.ConsoleHandler();
handler.setLevel(java.util.logging.Level.FINEST);
logger.addHandler(handler);
oracle.jdbc.driver.OracleLog.setTrace(true); */
oracle.jdbc.pool.OracleDataSource ods = new oracle.jdbc.pool.OracleDataSource();
ods.setURL("jdbc:oracle:thin:@" + args[0]);
java.sql.Connection conn = ods.getConnection(args[1], args[2]);
java.sql.ResultSet rs = conn.createStatement().executeQuery("SELECT user FROM DUAL");
rs.next();
System.out.println("Successfully connected as user " + rs.getString(1));
conn.close();
}

What priviliges need to Run Discoverer Desktop

Hi all,
I have installed Discoverer Desktop on client machine. When I login throug the administrator on any client machine then I can connect to Desktop. But unable to connect to Discoverer Desktop on client machine when I connect with my personal ID that dont have administrative priviliges. I got the error that system unable to update system registry. Use REGEDIT. And also desktop didnt connect and return TNS Error. What should I do in this condition? Should I give the administrator priviliges to every user who are using Discoverer Desktop.
Thanks.
Hassan Raza

Let me elaborate on exactly what I am doing with this. I have a view that goes against a 5 million record table and gets contract line flexfields. The performance is greatly improved when a specific contract is selected, so I have built in an extra join to a temporary table that contains nothing but contract number. When a report is run in Discoverer, the goal is to allow the user to enter a parameter of contract number, and then take that number and execute a function to populate the temporary table with that contract number, then get the data from the view that has joined to this table. It works if the user runs the report 2 times, as the data is being generated before the function is executed, so there is nothing in the temp table on the first execution due to timing. What I need to do is change the timing and force the function to populate the temp table prior to the running of the view. Is this possible?

How to associate an XA Resource Manager with a Corba Native Client?

Hello,
how is a Corba Native (C++) Client associated with an XA Resource Manager? I can't find it in the documentation.
I believe I understand how it works in a Tuxedo native client: buildclient needs "-r <rmname>" and tpinit() needs to include the group name (ubbconfig group with TMS_ORA and OPENINFO).
buildobjclient does not seem have anything like the "-r" option, and the bootstrap object does not seem to have any way to specify a group.
We have a Corba client that updates the database, enqueues into /Q and invokes a transactional Corba service. All three need to be in the same transaction. I am stuck on how to get an XA DB connection.
Thanks...
Roger
PS: The proper solution is to make the client's functionality a service and have the client invoke the service. But that causes other complications.

I got part of the answer from a different thread.
Native clients do not need a TMS_* to start a transaction. On commit/rollback they consult the Global Transaction Table (GTT) to find a TMS_* that is involved in the transaction and delegate the commit/rollback to one of those TMS_*.
For remote clients (using IIOP) the ISH handles the request from the remote client and deals with transaction management.
Roger

Is OS X Server What I Need?

Hi,
I've a low traffic iWeb site, and a relatively large mailing list, managed through phpList. I would maybe like to enalrge my website, and inlcude a forum too,a dn am wondering if having my own server is the asnwer. Currently I'm running into problems with daily email limits, which cause me to schedule emails to go out over along period of time.
Is OS X Server what I need? I'm a little unclear when I look at the documentaiton. For example, I see nothing like and admin center for manging my site and its backend.
Thanks,
Inoshi

OS X Server is a Unix server. Like Unix, Linux, HP-UX, AIX, Solaris and other such services, OS X Server systems can be configured for and can be accessed via remote networking protocols including generic IP networking, via L2TP or PPTP VPN, ARD/VNC, telnet or (better) ssh, and via HTTP/HTTPS web services protocols. Other configurations are possible. You could probably even configure and use IPoAC to access the server, if you really wanted to go to the effort involved in that network transport.
Running a server system is inherently more complex than running a client system. Even OS X Server, which is easier than most other servers around. You're still expected to know about server computing, IP networking and routing, definitely about setting up and running local DNS, about DHCP, network gateway-firewall-router boxes, network security, VPNs and other such details. Network clients use services provided by servers, so — if you're running a server — you get to know more about setting up for and running both the server itself, and about the services you're now providing to the client systems. (I've posted an intro to some of this here.)
Now if you wanted to host your own mail server or your own secured HTTPS web services or related, then you'd want a static IP connection. (Most ISPs don't allow servers on dynamic, DHCP service tiers, and — for those that do — getting these and related services working involves some hackery, and use of outside relay services.) This isn't specific to OS X Server, this is a generic IP addressing expectation of the protocols involved, and whether or not your particular ISP has opened or has firewalled the network protocols involved for your particular tier of service.
If you're working with a dynamic IP connection from your ISP, your options are rather more limited, and you and your ISP can be working at cross purposes.

What i need to install on new computer - has program that work with Oracl

hi
what i need to install on new computer that has program that
work with Oracle 11.2 ?
the database is on the server and the new computer connect to the server.
can i get link for download this ?
thanks in advance

thanks for the help !
but so many downloads..... what to download ?
i don't find any client 11g to download
i need to download the full Oracle 11g for this ?
can you send me exactly what to download ?
thanks in advance

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.
I have been reasearching how to do this on the internet, but I haven't found an easy explanation yet. My family is going crazy over each others imessages being sent to others in the family and not being able to use FaceTime because of conflicting email addresses. I have read that if each person gets their own iCloud account, this would work. However, I need to know what to do after I set everyone up with their own iCloud account. Do I make that the default email address to be contacted or can they still use their hotmail email addresses. Any help- with easy explanation- would be much appreciated!!

We do this in my family now. We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores). Each iDevice has this configured.
Then, each of us has our own iCloud account that is configured under Settings/iCloud. That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup. That Backup piece is pretty sweet and comes in handly if you replace your iDevice. You can just restore from it.
So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
In answer to what iCloud does for you: http://www.apple.com/icloud/features/
Think of it as an internet based ("cloud") area for all of those items listed in my response. What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures. Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures. 1000 may not stretch as far as it sounds.
Message was edited by: Michael Pardee

Corba C++ client: what's needed?

Similar Messages

Maybe you are looking for