Core Data, how default value is set @ XCode 4

Hi,
I updated XCode to 4.
Then, in core data modeling mode, I cannot set default value.
I couldn't find "default value" column. (only "Attribute" and "Type")
Where has it gone?
Message was edited by: Rascal3
Message was edited by: Rascal3
Message was edited by: Rascal3

In the upper right corner there is a set of buttons with the label "View" and three buttons, the one on the right has a tooltip, "Hide or show the Utilities", and this is a quick way to slide the panel you are looking at in and out. I can't figure out if I can include a picture.

Similar Messages

Current date as default value in scaffolding

I added a datefield to scaffolding and I'd like to populate it with a default value set to current date. How can I do that?

Hello Ram,
We can not put current date as default value in Crystal Reports 2008.
If your prompt has calendar then current date will be highlighted once you click on calendar icon.
HTH.
Sumit

Mandatory custom metadata field with current system date as default value.

I want to create a custom metadata field of type Date. I want to make it mandatory and want to set its default value as system date.
I have already created field of type Date. What expression I should write to make system date as default value?
Because its a mandatory field, what would happen to existing content. Will there metadata get updated?
Thanks
Sanjeev

I want to create a custom metadata field of type Date. I want to make it mandatory and want to set its default value as system date.
I have already created field of type Date. What expression I should write to make system date as default value?
See http://docs.oracle.com/cd/E23943_01/doc.1111/e10726/c08_config_ref.htm#CSIDO710
>
Because its a mandatory field, what would happen to existing content. Will there metadata get updated?No, it will not be updated - profiles are active only for new or updated items (in fact, they work on front-end).
>
Thanks
Sanjeev

Content Organizer bug - PDF files does not get routed correctly if autodeclaration is on and library level default values are set

It looks like whenever one specifies Column default values at a library level then the content organizer routing goes a bit awry SPECIFICALLY FOR NON OFFICE FILES [e.g. PDF] . Below are the observations and issues
1. Column level default value set on a record library with auto declaration of records turned on. The content organizer routes the document to the library but also keeps a copy of the document in the drop off library. It does not remove it from the drop
off library. The instant we clear the default value settings at the library level of the target library the content organizer works as expected again.
2. If default value settings are specified on a column in the target library then the PDF file gets routed to the document library but all the metadata is blanked out. The copy of the file that remains in the drop off library has all the correct metadata but
the target library has blanked out metadata.
Are the 2 observations described above by design or are they bugs? If so is there any documentation that is available that proves this because this does not make logical sense and proving this to a client in the absence of any documentation is a challenge.
The problem goes away if we shift the default value to the site columns directly at the site collection level. It's just the library level defaults that the pdf files do not seem to agree with

Hi Lisa,
Thanks for responding. This can be replicated in any environment but is only replicable for a specific combination of content organizer settings . The combination of settings I am referring to can be seen in the screenshot below. If you turn off redirect
users to the drop off library for direct uploads to libraries and if you turn on sharepoint versioning then you should be able to replicate the issue. Also we are using managed metadata site columns. I simplified this use case to a custom content content type
with just 2 custom managed metadata columns and can still replicate the issue in several environments. Also note the issue does not occur if the default values are set at the site or site collection level. It only occurs if you set the column value default
at a library level. I was able to replicate this on a completely vanilla Enterprise records site collection freshly created just to test this. Also note that the issue is not that the file does not reach the destination library. The issue is the
document does not get removed from the drop off library after it is transfered to the destination library which technically should have gotten removed.

How can I use today's date as default value in query string filter web part in SharePoint

I have a query string filter on my web part page. I am trying to figure out how I can set it's default value to Today? I can't find anything online...

Hi,
Per my understanding, you might want to set a default value to the Query String Filter Web Part.
It would not be able to set default value to the Query String Filter Web Part with the OOTB features available.
By default, with a Query String Filter Web Part in the current page, we can filter other web part in the same page by adding parameters and values in the address bar
of browser.
If setting the “Query String Parameter Name” of a Query String Filter Web Part as “t”, then we can filter the corresponding connected web part by inputting such an
URL into the address bar:
http://sharepoint/SitePages/Page1.aspx?t=value1
Suppose you want to filter the list view with a value dynamically when user opens this page, as a workaround, we can generate an URL with the parameters needed when
page loaded, then redirect user to this URL afterwards. This can be achieved using JavaScript.
About how to redirect user to other page with an URL:
http://www.tizag.com/javascriptT/javascriptredirect.php
How to get today’s date using JavaScript:
http://www.w3schools.com/js/js_dates.asp
Best regards
Patrick Liang
TechNet Community Support

Crystal Reports Date Parameter Default Value OPtion Empty

Is there a way to set a default date value for a Date Parameter? It is shown empty, it only allows to set a fixed date, i.e. 10/10/2013. But it doesn´t allow me to use a formula (which has a CurrentDate inside), so I can set, for example, today's date as default.
How can I achieve this? I´m not using Crystal for Enterprise. I'm using Crystal Reports, the normal version.

Hi Erika,
The feature is only available in CR for Enterprise at the moment.
If you're OK with selecting the currentdate from the dropdown, here's a workaround:
1) Go to the Database Expert > Click the Connection Name > Select 'Add Command' > Type in a simple sql query that returns today's date. Example for oracle would be:
Select SYSDATE from DUAL
2) Don't link this Command Object with other tables on the report
3) Create a new Parameter > Select 'Dynamic' under 'List of Values' > Under the 'Value' column choose 'SYSDATE' from the command object > Click create parameter > OK
-Abhilash

Date picker default value

No matter what I put in the default value for date picker none will show up.
I used these:
TO_DATE(CURRENT_TIMESTAMP,'DD-MON-YYYY HH:MIPM')
TO_CHAR(CURRENT_TIMESTAMP,'DD-MON-YYYY HH:MIPM')
CURRENT_TIMESTAMP
:CURRENT_TIMESTAMP
Any Help?
Thanks,

Hi,
Have you specified what type of default value it is? Static Text, PL/SQL Expression or PL/SQL Function Body?
I have that the best way to set a default value is by creating a computation, set to run Before Header and conditional on the item being NULL.
Andy

Give Date picker default value

All,
I am using a datepicker(dd.mm.yyyy hh24:mi) on a page but I don't want the sysdate as the default value.
I have 2 hidden items on my page: :P67_DAY(for example: 17/01) and :P67_HOUR (for example: 16.00).
Is it now possible to set the default value of the datepicker depending on the value of those 2 items?
Thanks in advance.
Kevin

Kevin,
I suggest to build a function with to parameters (date, and hour) and a return value.
In the default value you can execute thisfunction and pass the parameters :Pnnn_DATE and :Pnnn_HOUR.the return value will become the default value.
Leo

Today's date as default value for a parameter

Hello,
I am using Disco Plus 10g and Disco Viewer 10g.
I would like to default a parameter date to the current today's date. This date should be modified by the user (under Viewer), when he/she runs the report.
Is there a way to do this ?
Thanks a lot,
Olivier

Olivier,
I also needed that, but could not find a way to make it in 9.0.2. So, I gave up. If you find a solution, please share with us. Thanks.

Is there any way we can set default value for a Date Attribute to current date in Master Data Services

Is there any way we can set default value for a Date Attribute to current date in Master Data Services.
I as well wants to know that is there any posibility to show Calendar control while input data into respective date attributes.
Thanks.

Hi Anagha,
So far i havent found any way to set todays date by default from MMI, but i guess this flow should work as workaroud
1. Add buisness rule which can set a default value when Date = NULL/Blank
2.get the entity table ,use -select EntityTable from mdm.tblEntity where Name = '<enter entity name>'
3.Go to that table and add a after update trigger like
if uda_<entityid>_<attributeid(Date attribute)> = default value
update uda_<entityid>_<attributeid(Date attribute)> =getdate() where id = <LastUpdatedRow>
I will check on this too from my side.
By the way AFAIK i dont think so calendar control integration is possible .

How to assign a default value when there is no prompted value

Dear all,
I create a filter and it's value is relate to a prompt.If the prompt is not fill I found that all record is selected.
How did I assign a default value so that when I didn't fill some value in to the prompt and still can get the result by
the default value I set?
Thanks a lot!

Are you using dates for between or some character column?
Post your example.
Instead of between use to is equal prompts, so u will have then 2 fields one for date from a nd one for date to. Everything is the same as I wrote just repeat steps...
You must put 2 separate fields if you are using date between and you want to have default variable for both.
Column formula for the first calendar date prompt:
case when 1=2 then TIMES.TIME_ID else cast ('1.1.1900' as date) end
and for the second:
case when 1=2 then TIMES.TIME_ID else cast ('1.1.2900' as date) end
Now you set up default repository variable for both prompts.
Presentation variable you put in the set presentation variable on each prompt:
p_date_from
p_date_to
And in Answers filter will be like this:
*TIMES.TIME_ID between @{p_date_from}{VALUEOF("rv_test_date_to_char")} and @{p_date_to}{VALUEOF("rv_test_date_to_char")}*
or you can put a different default variables
*TIMES.TIME_ID between @{p_date_from}{VALUEOF("rv_test_date_to_char_from")} and @{p_date_to}{VALUEOF("rv_test_date_to_char_to")}*
I posted similar in my blog:
Date between in filter and title when using presentation variable from calendar dashboard prompt or drop-down list in OBIEE
http://108obiee.blogspot.com/2009/03/date-between-in-filter-and-title-when.html
Regards,
Goran O
http://108obiee.blogspot.com
Edited by: Goran O on 2009.04.23 03:37

Setting default value read from user session, for an LOV in Query component

I want to set the default value of a field in VO that participates in a named view criteria and thereby in Query component. That field is configured with an LOV by mean of a view accessor. The values are Y and N and the corresponding display strings obtained from view accessor are true and false respectively.
I am able to set the default value by setting the value of the criteria item corresponding to that field in view criteria. I am setting the value as either Y or N and I am able to corresponding display string as per the view accessor, on the query component when it is rendered.
I want to read the defauilt value from the ADF BC user session and set it as default value. I tried setting the values as "adf.userSession.userData.usageFlag". Iam ensuring that the attribute usageFlag is set before the view activity that has the query component is invoked. But this is ending up showing no default value in the Query component when rendered.
Can any one let me know how to go about with this?

I made up your table since you didn't provide some example, but I'm sure this will give you the picture:
SQL> var run_type varchar2(1)
SQL> exec :run_type := 'A'
PL/SQL procedure successfully completed.
SQL> create table my_cycles as select level cycle_id
2                            ,      level cycle_status
3                            from   dual connect by level <= 5;
Table created.
SQL> select cycle_id
2 from   my_cycles
3 where case
4           when :run_type = 'D' and cycle_status = 1 then 1
5           when :run_type != 'D' and cycle_status in ( 2, 3 ) then 1
6         end = 1;
CYCLE_ID
         2
         3
2 rows selected.
SQL> exec :run_type := 'D';
PL/SQL procedure successfully completed.
SQL> /
CYCLE_ID
         1
1 row selected.
SQL>

How can I validate a dropdown box to NOT accept the default value?

I have a fillable form where I need the user to select their "Number of Employees". I have added several ranges as their options in a dropdown box (1-10, 11-25, 26-50, 50+). My issue is the "defult value" is set to "1-10" and people submit it without changing it to the correct value.
I have changed the default value to "--Select One--", but it still lets them submit the form with that value entered.
I am assuming I need some sort of validation script that will basically say - "If the value in this field is --Select One-- do not submit the form, but give an error that says 'please select your number of employees" or something along those lines.
Basically I just want them to pick something as opposed to just submiting it with the default value.
I have looked all over and am not very good with JS.

You can not have the default value set to a real possible value. You need a value that should be selected.
Then for your submit script you need to test all of your required fields to make sure they are not at the default value.
You make a variable that assumes all the required fields are completed and then check each field and if any one still has the default value you set your variable to "false" and then when you have checked all the fields you test your variable's value and only if it is true to you submit the form.
var bSumbit = ture; // logical variable for submission test
// test drop down # of employess
this.getField("Number of Employees".).required = false; // clear required property
if(this.getField("Number of Employees".).value == "--Select One--") {
bSubmit = false;
this.getField("Number of Employees".).required = true; // set required property
if(bSubmit) {
// your submit acation;
} else {
app.alert("Not all required fields properly completed", 0, 1);

Property default value in presentation doesn't work in vSphere Web Client.

Hi,
Some of my default values don't work in the vSphere Web client.
Here is an example :
The user need to choose a date, this input parametter is called "FormDateRealisation".
In the next step, I have a user interraction with external input called "AppDateRealisation", that is an attribute. In the presentation, this parameter as a Default value property set to "#FormDateRealisation".
It work perfectly in the Java client, but when I try the workflow in vSphere web client, the default value doesn't not work.
Does anyone have an idea how to solve this ? I already found a solution to bypass this bug (Creating a script to transfert the input to the attribute)... But I would like to use the default value.

Hi,
I opened a ticket, they didn,t found the solution. But we found those logs:
Execution of action com.DemandeServeur/EspaceDisqueMultiple10 returned a javacsript 'undefined' value. Perhaps a return statement is missing in this action ? Will be converted to null.
Here is my code of "EspaceDisqueMultiple10":
Return type: string
Input: InGBHD (number)
if (InGBHD%10 != 0)
return "L'espace disque doit être un multiple de 10";
else
return;

Dynamic Default value of variable in query

Hi,
I would like to set current date as default value (e.g. system date 'SY-DATE') for a variable on selection screen in query. How to do that?
Thanks,
Helen

Hi helen,
Check this doc : <a href="http://sapbwneelam.blogspot.com/2007/10/how-to-create-populate-user-exit.html">How to... Create & Populate User Exit variable</a>
Hope it Helps
Srini

Core Data, how default value is set @ XCode 4

Similar Messages

Maybe you are looking for