CoreAudio: Plug-in "insert 3rd party plug in names here" Not Available

Hey guys, hoping you can help me with this one... been trying to read up on it a little and I've tried a couple of the suggestions that were made to no avail, the problem still is there.
Basically, Logic isn't recognizing any of my 3rd party plugs that were working fine for a few months until a couple days ago. TC Powercore PCI, NI Kore 4, Arturia Mini Moog V, Sonalksis TBK's and a couple others are all not being recognized... They all were fine, now Logic won't recognize them.
I ditched my Logic Pref's, re-installed all my plug's, repaired permissions... yet still, I get the "not available" story. If you guys can possibly help me out, I'd greatly appreciate it.
Thanks,
B
G4 Dual 1.25   Mac OS X (10.4.10)   2 Gigs Ram / Logic Pro 7.2.3

Hi,
A couple of days ago... sounds like you did an Os update, to 10.4.10
Which includes the 10.4.9 "fixes", which include a NEW and IMPROVED Logic Plug-In manager thingy.
Which is why your Plug-Ins are not compatible anymore...so...
Do a search in this very forum, and find how to fix the 10.4.9 issue.
Hint: you'll have to re-download the OSX update manually, and re-install that.
You'll spend time on this, but come out the wiser... ie don't let Apple's Auto-Update update anything, until you know for a fat it will not ruin your Logic experience.
Welcome to the brave new world of still doing things manually.
Cheers

Similar Messages

  • " plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

    Hi,
    Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
    Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
    Thanks,
    Shyam

    Hi Linc,
    Thank you for your response. Here is the screenshot of the warning that I am talking about.
    Here is what I do:
    1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
    2. Click Security Tab and click Manage WebSite Settings
    3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
    4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
    I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
    Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
    Thanks again,
    Shyam

  • Connecting my iPhone 4S with 3rd party composite cable; error "accessory not supported by iphone".  Sound comes through and it charges but NO Video???

    Connecting my iPhone 4S with 3rd party composite cable; error "accessory not supported by iphone".  Sound comes through and it charges but NO Video???  I have verified the cable, I can play video with sound from iPod Nano 4th gen.

    composite don't support mirror so it will only display on the tv when the app being used support tvout option
    the build in video app does so it should display on the tv at least my composite cable does with my iphone4
    the audio always works it's pretty much works like a headset

  • 3rd Party Consignment Process - Schedule Line Not Confirmed

    Below is the process that is being followed in the system:
    1) Consignment Fill Up is created with materials having Item Category as "Consignment 3rd Party ".
    2) A Purchase Requisition is automatically created as soon as the Order is saved.
    3) A Batch Job runs periodically that removes the check "X" in the field "Account Assignment Category " from the Purchase Requisition.
    4) After the X is removed from PR, another Batch Job runs that creates the Purchase Order from Purchase Requisition.
    5) After PO creation, Delivery is created from Consignment Fill Up Sales Order. (Vendor directly delivers the material to Customer and the PGI of    delivery moves the Stock into Consignee's account)
    Issue that happened in the System:
    1) A Consignment Fill Up was created with 2 materials having item category as "Consignment 3rd Party "
    2) A Purchase Requisition was automatically created.
    3) "X" was removed from "Account assignment category" field in PR by the Batch Job. Removal of this "X" breaks the link between the Fill Up Order and Purchase Requisition.
    4) After this, Purchase Orders were created for both the materials.
    5) Now, in the Consignment Fill Up, Sales Unit was changed from KG to LB for line item 10. This caused the Schedule Line for line item 10 to change its status from "Confirmed" to "Not Confirmed" and Confirmed Quantity = 0.
    6) Now, when the delivery was created for the Fill Up Order, only Line Item 20 was delivered.
    7) The main issue here is - How to create the Delivery for line item 10 from Fill Up OR How to confirm the Schedule Line for line item 10 ??
    Is there any way out by which the line Item 10 can be seen in VL10H or VL01N ?
    Note: We cannot change any configuration as we only have display access for the configuration.
    One solution could be - To reject the Line Item 10 in the Fill Up Order and then creating a fresh Fill Up Order for the same material and same quantity and then, deliver it. This would also move the Material Stock into Consignee's Account.
    But, if there is any workaround available by which we can deliver the Line item 10 without rejecting it, please let me know.
    Thanks n advance for your suggestions.

    Hello,
    the proposed solution seems correct to me: check if when creating the new item, you have the option to choose an alternative item category not creating a Purchase request but getting material from available stock.
    If you simply create a new item, its account assignment category will expect to get the material to be delivered from special stock E assigned to that item.
    Anyway if this doesn't work you don't have many alternatives: why don't you ask to the SAP support team or to the IT to solve this issue?
    Best regards,
    Andrea

  • Jabber Mobile/3rd Party App Contact Names

    Prior to integrating our CUCM solution with LDAP, whenever we added a user account to CUCM it replicated across to CUPs and the users name appeared to people using windows, Iphone and Android apps as Firstname Lastname. Post integration of CUCM to LDAP has resulted in any new users that are created appearing in the Iphone/Android/3rd Party App as [email protected] rather than the firtname lastname we were previously getting. NOTE **Its not affecting Windows Desktop Jabber users***
     We have noticed that if you log onto the cups user page and look at your contact list <Ipaddress:8443/cupsuser> User Options > contacts those that were created in CUCM prior to integration have an entry in the alternative name field.....those that were created in AD and synced to CUCM then replicated to CUPs do not!
    I have pulled the following from a log on the Jabber client on a Mobile device (replaced specifics names etc)
    02-25 10:40:14.476 2642 2642 D ContactsAdapter: [ContactListFeatureSet.cpp(359)] [DumpContactListToLogs] - Contact: <0x6be1b928>, name: <Firstname> <Last Name>, jid: [email protected]
    02-25 10:40:14.476 2642 2642 D ContactsAdapter: [ContactListFeatureSet.cpp(359)] [DumpContactListToLogs] - Contact: <0x6a75e6f0>, name: [email protected], jid: [email protected]
    Any ideas as to  why the Alternate name field doesn't populate for CUPs contacts when users are created in AD, but did when previously created in CUCM?
    Is their a Field in AD that will populate this in the background?

    Thanks Jaime
    EDI still working. Jabber Windows client Fine, however the BDI doesn't appear to be working on Android/Apple devices? Logging appears to show that these devices aren't even trying to access LDAP servers for directory
    Is the configuration below valid?
    - <Directory>
      <DirectoryServerType>EDI</DirectoryServerType>
      <PrimaryServerName>IPADDRESS</PrimaryServerName>
      <ServerPort1>389</ServerPort1>
      <ConnectionUsername>username@domain (UPN)</ConnectionUsername>
      <ConnectionPassword>password</ConnectionPassword>
      <SearchBase1>OU=users,DC=domain,DC=co,DC=uk</SearchBase1>
      <DirectoryServerType>BDI</DirectoryServerType>
      <BDILDAPServerType>AD</BDILDAPServerType>
      <BDIPrimaryServerName>IPADDRESS</BDIPrimaryServerName>
      <BDIPresenceDomain>domain.co.uk</BDIPresenceDomain>
      <BDIServerPort1>389</BDIServerPort1>
      <BDIConnectionUsername>username@domain (UPN)</</BDIConnectionUsername>
      <BDIConnectionPassword>password</BDIConnectionPassword>
      <BDISearchBase1>OU=users,DC=domain,DC=co,DC=uk</BDISearchBase1>
      <BDIUseJabberCredentials>false</BDIUseJabberCredentials>
      <BDIPhotoSource>thumbnailPhoto</BDIPhotoSource>
      <BDIPredictiveSearchFilter>mail , displayName</BDIPredictiveSearchFilter>
      </Directory>

  • External 3rd party USB DVD drive will not show up on my 2008 Macbook pro

    I have a the new Macbook pro, when I connect my Liteon USB DVD drive it does not show up my Macbook pro. The only DVD drive showing up is the one on my Macbook pro. How do I make the 2nd DVD drive show up. I just need to 2nd drive to tranfers data from dvd to the external drive.

    Hi, ipodtrip1. Nothing will appear on your MBP's desktop unless there is a disc in the drive. Does a disc in the drive not appear either?
    If not, does System Profiler detect the drive as a connected device?
    If you have another USB device you can connect to your computer, disconnect the optical drive and connect the other device. Does System Profiler detect that device?
    If not, reset the System Management Controller, and see whether doing so reactivates your USB port.

  • 3rd party Sansa media player does not appear in Itunes

    A friend of mine gave me his Sansa Clip media player and asked me to put some music on it. He had 20 some songs that I agreed to purchase for him, and then put them on his media player. Well, duh, I've since learned that purchased songs can only be loaded onto Apple devices. So now I've spent $25.00 on music that for the most part, I could care less about.
    Does anyone have any suggestions?
    One last question, the Sansa device does not launch Itunes; nor does it even show up in the Itunes window. The device info does say its mac compatible???

    lhutton wrote:
    How do I insure they are mp3's?
    If you bought them from the iTunes Store, they are surely not MP3s. If you bought them from Amazon.com they are MP3s.
    Aren't they locked/protected from converting?
    If you bought them from the iTunes Store, and did so recently, they are unprotected AAC files. You can convert them to MP3 by following the instructions in the Help article "Saving a copy of a song in a new file format." Note that the conversion process leaves you with the new file as well as the original, so make sure you don't stick your friend with the AAC.

  • Re-publish site using 3rd party FTP Client-Changes are not visible

    I uploaded my Iweb site to the server using FileZilla. When I make changes in I-web and republish, the changes are not visible. I even tested it out by deleting the site folder and re-uploading everything after I re-published the site in IWeb...but the change still isn't visible. Any suggestions as to why?

    Apparently you publish to a folder.
    iWeb's job is done!
    What you do next with the files is your responsibility.
    Try uploading the changed files to their respective folders on the server.
    You can identify the changed files by the date/time.
    Then in the browser, clear the cache and reload the page.
    iWeb is not involved.

  • 3rd party- SD cost in billing not carrying the price for vendor

    Hi all,
    in SD billing VF01(to customer),the cost for buying the material form vendor is prompted. The cost will take the price in the PO for vendor. Example there is 2 item. A -price 1, B - price 2. Both of the materials are being GR PO on the same date, but the invoice verification (MIRO) sometimes is posted partially- item A first, then item B.
    The problem is here, when the partial invoice verification is done, the cost in SD billing will only take price of item A while the qty is a summation of item A & B.
    Can anybody explain why is this happening and how can we avoid this..
    Thank you.

    hi
    i just want to know  what item catagory u assigned to sales doc, and in that item catagory, in billing relavance wchih valuve u maintained just chek (it should be 'F' order realted billing but quantity will pick form invoice(MIRO) )
    then when ever u do the billing to customer system will for only deliverd quantity and pick the cost form mat-master for that quantity only.
    if helps reward me
    kranthi

  • 3rd Party Airport PCI Card will not connect

    My Power Mac has a Airport compatible PCI card which will not connect to my network. When I upgraded to 10.5 before it broke, It had better chances to connect. HELP ME! I'm currently using Internet Connection Sharing to connect.

    Never Mind.

  • Ethercat 3rd Party Device Profile XML File not complete

    Hi all,
    I'm trying to use a Schneider LXM32 servo drive coupled to a NI cRIO 9074 Ethercat master.
    The problem is that my LabVIEW project is not showing me the full device profile.
    There are 4 available PDO for this device :
    1) Cyclic Synchronous Position
    2) Cyclic Synchronous Velocity
    3) Cyclic Synchronous Torque
    4) Free switching beetween 1) 2) or 3)
    BUT, I only see the firts PDO parameters after importing the xml file. If I open the xml file manually, I see that all the PDO are available.
    The xml file is available in this post.
    Of course, I need to operate in the 4) mode, not the 1)
    Help me, please....
    Sébastien MICHAUD
    CLD
    Attachments:
    Schneider_Electric_LXM32M_V114.zip ‏18 KB

    Hi,
    Thank you for your answer.
    I successfully modified the XML file of my Schneider drive :
    Now I have a lot of others problems (I have made a request on NI France, I supposed you are the one who phoned me today).
    1) The XML file of my LTi DRiVE (another drive of the test bench) is done like this (see attachment):
    1) I can't move the Sm tag because it's already everywhere
    2) I don't understand why 4 devices are exposed.
    Additionnaly, see below the LabVIEW project with this device :
    3) The I/O exposed for the 2 Devices (Schneider and Lti) are shared variables. But I want to poll these I/Os every 125µs. The scan engine can run at 1 ms. So, if a put a "percentage of each scan period" to 1% (the default value is 40%), will I be able to poll every 10 µs ?
    In this example :
    https://decibel.ni.com/content/docs/DOC-11191
    The scan period is 4 ms at the best, so with 40% of each scan period, it represents 1.6 ms.... am I correct ?
    4) Is it necessay to use NI SoftMotion (https://decibel.ni.com/content/docs/DOC-11191) to get/set data to a motor drive ? Is it much more easy with NI SoftMotion ?
    Thanks,
    Sébastien MICHAUD
    Attachments:
    LUST_22_SO.zip ‏2 KB

  • Iweb & 3rd party servers - file names

    i'm new at this. i built my website in iweb. i got a trial version of fetch to launch my site onto my host at yahoo. now i'm getting all these errors in uploading the files because file names and jpg names have spaces in them. yahoo is a unix based server. is there a way to change all my file names to 1 word or do i have to rebuild the entire website????
    this is frustrating.
    Steve

    is
    there a way to change all my file names to 1 word or
    do i have to rebuild the entire website????
    Inside iWeb you need to change your page names to something without spaces, either one word or replace spaces with underscore or hyphen. Then republish and reupload. You may have to do the same with any graphics or links to files if their file names have spaces in them. Here are some tips for using other servers:
    http://homepage.mac.com/thgewecke/iwebserver.html

  • 3rd Party FTP, all Widgets are NOT working!

    Hello Community and Devs
    Ive got problems with uploading my muse site to and external hoster. None of my widgets are working correctly! There are the Menuwidget where the drop down is not working, the Slideshow under the menu, and the quotes wdget at the footer.
    Ive tried to upload with MUSE and also with filezilla and smartftp. I googled a bit about that issue and some say that maybe every file is correctly uploaded because of permission, but if i compare the folder on my computer and the one ive uploaded to ftp-server, those are the same!
    Anyone know whats wrong?!
    www.ulysseshuber.ch
    uhuber.businesscatalyst.com
    Marc

    Hi Ulysses,
    Currently, Muse requires PHP version 5.1 for dynamic Synchronized Text support.
    There's a forum thread here about how to check for PHP compatibility on your server: https://forums.adobe.com/thread/1307217
    There's also a PHP FAQ for Adobe muse here: https://forums.adobe.com/docs/DOC-5011
    -Sam

  • Logic 9 no longer recognising 3rd party plug ins

    Without any change to OS or software versions, Logic 9 has decided not to recognise any of the 3rd party AU plug ins that have been working perfectly in all projects ... until today.
    How do I fix this?
    I'm using:
    Logic Pro 9.1.1 (1697.53) in 32 bit mode
    OS 10.6.4
    Novation Automap Pro 3.5
    On starting Logic, a notification window tells me
    Logic Pro: Plug-in "Battery 3 ("Not available
    Logic Pro: Plug-in "FM8 (Autom" ("Not available
    Logic Pro: Plug-in "Kontakt 3 ("Not available
    Logic Pro: Plug-in " Massive ("Au available
    Logic Pro: Plug-in "Ozone 4 ("A Not available
    Logic Pro: Plug-in "Predator ("A Not available
    Logic Pro: Plug-in "Predator (" Not available
    Logic Pro: Plug-in "Sylenth1 ("A Not available
    Logic Pro: Plug-in "Sylenth 1 ("Not available
    If you have a definitive answer, I'd love to hear it.
    Cheers.

    I think logic is missing your Auto-mapped synths all of a sudden.
    It happened to me with Predator just now.
    After Automap was updated to 3.5 I got the same message.
    Rescan with the Automap Plugin manager without Logic running and see if the plugins are available.
    Tick the boxes of all the synths Logic expects to see auto-mapped, press OK, close Automap Server and restart logic.
    Now Logic and Automap Server are started in order.
    If the plugins are not available you can also try to move the AU components that are mentioned to another location on the drive.
    Start logic, on your Channel Strip the names of the synths will be crossed out because you moved them.
    Close Logic and Automap Server, move the AU components back to their original location and restart logic.
    If I am correct they should be rescanned.
    After this, scan with the Automap Plugin manager.
    Check the boxes and tick the boxes of the plugins Logic expects to see Auto-mapped and restart logic again.
    It is a lot of restarting I know, but the goal is to flip that bit in the software that is giving all this hassle.
    I hope this works for you, It worked for me on logic 8.

  • Using a 3rd party router for Multicast

    Hi all,
    There’s a lot of feedback on this board about using third party routers with Multicast, so we’ve decided to put this information all in the one place for you.
    NOTE: the workarounds below haven’t been tested by BT as we do not support 3rd party routers and we do not endorse any of them. Our recommended router remains the Home Hub.
    With the above statement in mind, we know that a lot of you do choose to use other routers.  The information contained here has come from fellow customers who have given their time to share this information in good faith. Thanks to all of the forum members who have helped make this information available to our community it is a great example of the wealth of information that a community can provide and we hope this encourages users to come back and visit us in the future.
    A special mention goes to walkerx who has posted and prompted a lot of the provided information.
    Hub configurations in alphabetical order:
    Apple Airport Extreme
    Put your Airport Extreme into Bridge Mode and turn the Home Hub's wireless off.
    [From MartinH's post]
    ASUS RT-N66U
    You must configure 'Enable VPN + DHCP Connection' to 'No' under the WAN option.
    Settings used were:
    - Have router on the latest firmware: 3.0.0.4.374.130
    - Use the following settings in LAN > IPTV:
    - 'Select ISP Profile' = None
    - 'Choose IPTV STB Port' = None
    - 'Use DHCP routes' = Microsoft
    - 'Enable multicast routing (IGMP Proxy) = Enable
    - 'Enable efficient multicast forwarding (IGMP Snooping) = Enable
    - 'UDB Proxy (Udpxy) = 0
    [From sepph's post]
    Billion 7800DXL
    Router has been reported to work.
    [From walkerx's post]
    Billion 7800N
    Requires you to add another profile (Pure Bridge) to the EWAN port along with the PPPoE profile. Save settings & restart. Also enable IGMP proxy & snooping.
    [TimCurtis' post]
    DLink Dir 825
    If enable multicast you can see the on-demand players but get an IPC6023 error when viewing the test channel (this means poor internet channel quality). This error message comes up even though it works if use the Home Hub 4
    [walkerx's post]
    Netgear R6300
    Netgear R6300, but with the Home Hub 3.0 and 500Mbit Powerline adapters in the picture.
    Modem -> HH3 -> R6300 -> Powerline -> 2 x Youview Boxes on other Powerlines.
    To do this, configure the Home Hub 3.0 as 192.168.1.1, then disable its wireless and DHCP. Make sure that NAT and UPNP were enabled, and then set it to use the address 192.168.1.254 as a DMZ server.
    Then configure the R6300 as the address 192.168.0.1, using the WAN IP address of 192.168.1.254, with 192.168.1.1 as the gateway and DNS server. The R6300 is then connected via WAN port to the HH3 Gigabit port.
    In the R6300 settings switch on IGMP. 
    The above settings allow both YouView boxes to use on demand content and different streaming channels simultaneously, as well as giving the full features of the R6300 such as AC1750 wireless, network printing, and DLNA
    [wigglr's post]
    TP-Link AC1750
    Router has been reported to work.
    [zarf2007's post]
    TP-Link Archer C7
    Router has been reported to work.
    [HappySlayerUK's post]
    TP-Link TL-WR1043ND
    No configuration needed, plug and play.
    [walkerx's post]
    TP-Link WDR4300 N750
    Router has been reported to work.
    [aseymour's post]
    TP-Link TL-WDR4900 N900
    Router has been reported to work, plug and play.
    [cactusbob's post]
    TP-Link routers in general
    How to configure Multicast on TP-Link routers (from the TP-Link website).
    One of our posters also found the following:
    He found that your router must be able to do the following for Multicast:
    For an end user connected via Openreach GEA (FTTC and FTTH)
    • The Residential Gateway will support:
    – IPoE for multicast traffic and PPPoE for BB traffic;
    – VLAN tag ID of 0 or no VLAN tag ID for multicast and BB traffic;
    – Fork IGMP requests up multicast and BB paths.
    For an end user connected to an MSAN (WBC copper)
    • The Residential Gateway will support:
    – A dual VC architecture;
    – Accept TV Connect multicast traffic on ATM VP/VC 0/35 with IPoE and broadband traffic on ATM VP/VC 0/38 with PPPoE;
    – Fork IGMP requests up multicast and broadband paths.
    IGMP should v3 and will be in range from 225.0.0.0 to 239.255.255.255 
    [walkerx's post]
    List of routers that do not appear to work:
    Draytek 2750n
    Linksys EA4500
    linksys EA6300
    Netgear AC6300
    [From Red_Snow's post]
    If you use a router that’s not listed here, do a search on the YouView from BT board to see if advice has been posted elsewhere. If it hasn’t, do post your question.
    Thanks,
    Stephanie
    Stephanie
    BTCare Community Manager
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

    Thanks for confirming that quails.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Maybe you are looking for