Correct way to install SHARE POINT 2013 ON WINDOWS 2012 R2

HI
INSTALLING SHAREPOINT 2013 ON WINDOWS 2012 R2 IS NOT SUPPORTED , when i search for this i found a kb article
https://support.microsoft.com/en-us/kb/2891274
SharePoint 2013 SP1 support in Windows Server 2012 R2,
So in windows server 2012 R2 machine i should install
1) install sharepoint pre requisites 
2) run sharepoint setup and install binraries
3)and after download sharepoint 2013 SP1 and install 
is the right steps will i do for INSTALLING SHAREPOINT 2013 ON WINDOWS 2012 R2?
adil

Get the SharePoint 2013 w/ SP1 ISO from the MSDN or VLSC (or Download Center if using SharePoint Foundation 2013) -- this is required for Windows Server 2012 R2, other media will not work. Follow the standard SharePoint install process, e.g. run the pre-req
installer, and then install SharePoint.
Once completed, install the appropriate version of SP1 for your product. See http://thesharepointfarm.com/2015/04/list-of-good-sharepoint-2013-service-pack-1-packages/
for a list of packages.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

  • Share Point 2013 Designer not showing platform as "Share point 2013 Workflow" at the time of workflow creation.

    Hi All,
    I am trying to create workflow for my Share Point 2013 site. To do this, I installed Share Point 2013 Designer,
    then created couple of workflows in that, using "Share point 2013 Workflow" platform.
    But when today, I tried to create workflow, I found that "Share point 2013 Workflow"  platform option was not there. Because of that I am unable to create and deploy workflow on my SP 2013 site.
    I am really not getting the problem. As I created some workflows using "Share point 2013 Workflow"  platform on same share point designer and now I dont see that option in dropdown.
    Please suggest me something for this. I tried all possible solution which are present on internet.
    Thanks in advance.

    Hi,
    Since you are posting the thread in SharePoint 2013 server forum, I assume you are using SharePoint server 2013.
    I understand the option SharePoint 2013 platform disappears when you create a workflow in Designer, the issue might be caused by workflow manager. Please refer to the article below and check workflow configuration per the steps listed:
    http://techbrij.com/the-option-sharepoint-2013-workflow-platform-not-available
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • In Share point 2013 how to add more than 2 group by in list

    In Share point 2013 how to add more than 2  group by in list .

    Hi,
    According to your post, my understanding is that you wanted to group by on more than 2 columns in a List View in SharePoint 2013.
    There is no out of the box way to achieve your scenario directly.
    As a workaround, we can use the following method to achieve it.
    First, we can insert Data View Web Parts in SharePoint Designer 2013.
    It’s because the SharePoint Designer 2013 can’t support Design view, then the Data View Web Parts XSL cannot be visually manipulated.
    You can refer to the following article to insert a Data View Web Part.
    http://www.synergyonline.com/Blog/Lists/Posts/Post.aspx?ID=259
    And then, you can use the following solution that can be used to
    group by on more than 2 columns in a view
    to implement it in SharePoint Designer 2013.
    http://techtrainingnotes.blogspot.com/2011/01/sharepoint-group-by-on-more-than-2.html
    http://chanakyajayabalan.wordpress.com/2010/03/15/group-by-for-more-than-two-columns-in-sharepoint-list/
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How to visualize the power map in office 365 or share point 2013??

    Hi,
    I have designed the power map within excel.
    Here power map can be able to saw within excel, but  i need to visualize to web browser like share point 2013 or office 365.
    Anyone know how to display it?
    Thanks,
    Ramu

    With Power Map you have the ability now to create a video of the tour when you are done.  You can then use this video file to share the tour in SharePoint, in Power Points, YouTube, etc.
    http://office.microsoft.com/en-us/excel-help/export-a-power-map-tour-as-a-video-HA104106952.aspx
    At this point this is the only way to share the tours unless you open up the Excel file and launch Power Map.

  • How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?

    hello,
    How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?
    thanks,
    Jay

    Hi,
    I understand that it applied first logo to all other sub sites.
    Please make sure that you change the logos in the subsites.
    If we change the logo in the root site, the logos in the subsites will be changed at the same time.
    However, we can change the logo in the subsites separately.
    We can go to a subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo->select a picture, then it will has a different logo than the root site.
    Then go to the other subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo-> select another picture, then it will has a different logo that the first subsite.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Open pdf in mobile browser (share point 2013)

    hello,
    I need to Open pdf  in mobile  browser (share point 2013).i tried browser handling type in  permissive mode.
    but i couldn't view the pdf when i access through mobile browser.
    is there any work around to do this .?
    any help would be appreciated.
    Thanks regards, Vignesh.

    Per the earlier thread, your best bet is to use Office Web Apps in conjunction with SharePoint 2013 to display PDFs. Otherwise a browser needs a control (which most if not all mobile browsers will not have) to handle viewing PDFs in the browser.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Correct way to install patch in Oracle RAC

    Hello,
    What is the correct way to install a patch in an two-node Oracle RAC 11g on Windows server 2008? Each node has its own ORACLE_HOME.
    Do I have to shut down one Node before I patch the other Node?
    Or both nodes can be up when installing patch? First do it on Node 1 and then on Node2?
    Thank you

    Typically you can do a rolling upgrade, patch one node, then the next node without bringing down the entire cluster, but as rui_catcuddler suggested, follow the Oracle instructions as closely as possible.
    We have found several bugs with RAC 11gR2 on Windows 2008 R2, some minor, some critical. If this is your Oracle version and platform then try to get to the latest Oracle RAC release 11.2.0.3.
    Regards,
    Kevin

  • What are share point server 2013 & Share point Designer 2013 & Office 365 & Yammer & Share point 2013 & Windows server 2008 server & Windows Server 2012 Server Data Center?

    I need some clarifications.
    What are share point server 2013 & Share point Designer 2013 & Office 365 & Yammer & Share point 2013 & Windows server 2008 server & Windows Server 2012 Server Data Center? How each them are related in collaboration system?
    Is Share point server 2013 and Share pointer Designer 2013 available in 32bit version? If not, then how to use it in 32 bit machine by using any VMs?
    Thanks
    Senthil

    SharePoint Server 2013:
    http://office.microsoft.com/en-us/microsoft-sharepoint-collaboration-software-FX103479517.aspx
    SharePoint Designer 2013:
    Designer is used to develop SharePoint pages using HTML/CSS/JS as well as SharePoint Designer Workflows
    Yammer: 
    https://about.yammer.com/
    Windows Server is Windows, but the Server OS. SharePoint runs on top of supported Windows Servers editions (see http://technet.microsoft.com/en-us/library/cc262485.aspx).
    SharePoint Server is 64-bit only (trial:
    http://technet.microsoft.com/en-us/evalcenter/hh973397.aspx), although Designer does have a 32-bit edition (full product:
    http://www.microsoft.com/en-us/download/details.aspx?id=35491).
    You will need the capability to run 64bit VMs. Minimum recommended all-in-one VM for SharePoint is to allocate 24GB of RAM, but you can get away with as little as 12GB (I wouldn't go below that). Because of this, it generally rules out 32bit OSes as a virtual
    machine host.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Mobile Application in share point 2013

    hi,
    How to Develop mobile application in share point 2013, i don't know how to do this one ,
    could please explain step by step.

    Hi,
    SharePointProMag has a very good guide on Mobile App-
    http://sharepointpromag.com/sharepoint/create-sharepoint-integrated-mobile-app-add-support-search-rest-crud-operations
    http://msdn.microsoft.com/en-us/library/office/ms464268(v=office.14).aspx
    http://technet.microsoft.com/en-us/library/fp161352(v=office.15).aspx
    If you want to render SharePoint using your mobile phones, then you should consider the following
    Device channels - http://msdn.microsoft.com/en-us/library/jj862343
    http://msdn.microsoft.com/en-us/library/jj822363.aspx
    and you can explore Rest APIs , JSOM for integrating your application with SharePoint
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • Correct way to install new MotherBoard?

    What's the correct way to install a new MB?
    Do I format first, unhook the old stuff and hook up the new then install windows?
    Thanks for the time.

    Please read this - Moan Guide
    Please create a signature of your current system (if you have one!!!) or else of the individual parts you wish to assemble.
    When first building a new system it is always preferable to start afresh with clean hard drives, and a fresh OS install.
    However, if you already have a system up and running and you are just upgrading the motherboard, then it is possible to keep an existing OS + data installation and update the relevant drivers.
    IMHO, unless I had some VERY precious data and no other way of storing it whilst updating, I would start with a newly formatted hard drive and a fresh OS installation.

  • Captivate 6 video files not loading on share point 2013

    Hello,
    I use Adobe Captivate 6 and have courses that I'm loading to a share point site for learners to access. I worked off of my C: drive, then copied the published folders on a shared drive. I then linked the html URL to play the course.
    When the courses were built, some simulations were recorded in video mode. I noticed that in the published folder, Captivate creates mp4 files. For some reason, when the course plays on share point, it does not play these files and the course clocks until you advance to the next slide. Everything else works fine, no issues.
    I'm looking to see if anyone else has encountered this same issue and am curious what was done to fix it.
    Thanks! Marissa

    Thanks for the reply Ron! I checked with my share point admin and she said that share point 2013 (our version) can play mp4 files, so there shouldn't be an issue there.
    She's not familiar with Captivate so it's kind of difficult getting to the root of the problem, but somewhere along the line, when the course link is accessed, Captivate is looking for that mp4 file to play it, and it cannot find the file.
    I thought then maybe I would take the mp4 file in the published folder and try to embed the video directly into the course, but I haven't tried that.
    Any other suggestions?
    Thanks, Marissa

  • Move dashboards from perfomance point server 2007 to share point 2013

     Hello every one,
    can you please help me in the below.
    I have to move the reports and dash boards from old to new share point (2013) site. There is already a share point site built and running successfully. I need to add 1 section of dash boards and reports into sharepoint 2013 from the old site.
    For this I need to add new sub site site rite? My question here is how to bring dash boards and reports from old site to new site (share point 2013).
    Old site is performance point server 2007 and new site is share point 2013.
    Thanks
    Kumar

    Given you aren't using PowerPivot for SharePoint, you can continue using SSAS 2008 R2 for your cubes and data connections. BI dashboards, Lists, and so forth are just SharePoint content, and they get upgraded when you migrate to 2013.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Enable Single Sign On in Share point 2013 with external IDP like CAS (Central Authentication Service)

    Hi,
    We need to configure our share point 2013 web application to work with third party site using Single Sign On (SSO) service.
    Currently we are using CAS (Central Authentication Service) as third party site. Trying to accomplish this from the last few days didn't found anything helpful.
    Please let us know is share point 2013 support authentication with any external site and if not is there any alternative to achieve this e.g. via ADFS or something else. Please help.
    Neetu Tanwar Software Developer

    You can do CAS and SharePoint auth using below
    Check below
    http://webcache.googleusercontent.com/search?q=cache:EhC3JLvqDWwJ:balendrant.blogspot.com/2013/05/external-authentication-providers-for.html+&cd=4&hl=en&ct=clnk&gl=in&client=firefox-beta
    http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=9&ved=0CFEQFjAI&url=http%3A%2F%2Fdownload.microsoft.com%2Fdocuments%2FFrance%2FInterop%2F2010%2FFederated_Collaboration_With_Shibboleth_2_0_and_SharePoint_2010_technologies-1_0.docx&ei=i0u1U6bVB4KMuATP94II&usg=AFQjCNF09JusWUS97-em12JFpaH64Pxa3A&bvm=bv.70138588,d.c2E&cad=rja
    If this helped you resolve your issue, please mark it Answered

  • Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2

    HI,
    I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
    Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
    Setup is unable to proceed due to the following error(s):
    Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
    Regards
    Anil Kumar

    You really need to do what error is suggesting.
    Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
    Nosh Mernacaj, Identity Management Specialist

  • Not able to install ms-office 2013 in windows vista home basic

    Hi
    recently,we have purchased ms-office 2013 but we are not able to install the ms-office 2013 and it is showing not compatible.
    it is an dell vostro laptop v1510.It is an 32-bit operating system .
    Could you please share your ideas why i am not able to install MS-Office 2013 in  windows vista Home basic.
    We are using windows mail whether this windows mail will migrate  all mails automatically to outlook 2013.
    looking for your reply at the earliest.
    Regards
    Pradeep

    Office 2013 does not run on Vista, it is only compatible with Windows 7 and above.  You will not be able to install it. 
    System Requiremets for Office 2013
    While the above link is for Office 365 as well as Office 2013, it shows the requirements. 

Maybe you are looking for

  • Is it possible to remove the iphone history of wireless access points to which you've connected?

    So.... I work in a place where there is a lot of security and snooping.  There are folks specifically assigned to track down phones in unauthorized places.  Their enthusiasm is sometimes annoying. I leave my phone in a locker outside of the restricte

  • Setting the number of consumers for a topic

    Hi, I have a topic connection factory from which I can creating 2 topic connections and setting different clientids for each connection to one topic.But I get a error com.sun.messaging.jms.ResourceAllocationException: [C4073]: A JMS destination limit

  • Applescript to add multiple assets to INDL

    Hi I'm having problems writing an applescript that will take an item (or all items) on a page and add it/them to the Indesign library. I can get all graphic elements associated to an advert ID (eg: advert name 12345678, has 6 associated graphics name

  • Drop down values change

    I am reading in an XML document that contains a category and items from that cat. I have set the select to onChange=valueChanged() and in that method I am trying to get the ID of selected text to get a new combobox built from it using that ID. Here i

  • Physical inventory with CIN

    Hi All, After carrying out physical inventory transactions ex MI01, MI04 and MI07. Which transaction is to be used to adjust for excise duties -Credit /debit. With Regards, Vijaykumar P