Correcting OCR errors that are not "Suspects"

I routinely find OCR errors that Acrobat does not flag as suspects. I have not found any way to correct this text, as it seems the only tool that Accrobat has for correcting OCR text is the "Find Suspect" tools. It would seem that if the text is there, it should be editable. But after hours of research, I have not found a way. However, I also have not found anything that says that this text cannot be edited. Am I missing some tool that would help in situations like those?

Hi,
The ability to mark a non-suspect and correct it is available in Acrobat DC. You can use the following steps:
Go to tools>Enhance Scans>Recognize Text>Correct Recognized Text
Check "Show recognized text" check box
Double click on the word you want to mark as a suspect and correct it.

Similar Messages

Infopath Form error - validation errors that are not in the current view?

Hey Experts,
I have a Sharepoint 2010 server running on Server 2008. We have a list that has a custom form created using infopath for editing and new creations.
The problem appeared after a server restart.
Users can no longer create a new item in the list when they do they get this error:
The form contains the following errors:
Field or group: my:Author
Error: Cannot be blank
When I try and preview it in infopath2010 it also does the same thing but provides a more detailed error:
Infopath cannot submit the form because it contatains validation errors that are not in the current view. Errors are marked with a red astrick or red dashed boarder.
If you cannot find an error in otherviews, there might be a problem with the forms design.
I checked all thru the form for my:Author field and can't find it on the page as a control or in the list of fields. Any recommendations?
Thanks!

Didn't know you also created this as a thread. If you send me a direct email in the future, please let me know you also created a thread so that I can answer publicly to help others and to get credit for the time/effort spent. Thanks.SharePoint Architect || Microsoft MVP ||
My Blog
Planet Technologies ||
SharePoint Task Force

I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly. I verified my disk and found errors that could not be repaired. I erased the drive and restored system back to the previous day.

I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly. I verified my disk and found errors that could not be repaired (errors were associated with boot drive) I erased the drive and restored system back to the previous day. Has anyone else experienced this problem?

Since it's a new machine, contact Apple's Support and let them deal with it. Allen's already recommended an Apple repair station visit. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you might be eligible for an onsite repair since yours is a desktop machine (depends on where you're located). BTW, the AppleCare Protection Plan's the best warranty policy available for desktop machines. Get it if you don't have it before contacting Apple.
27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

I have two songs I downloaded that are not the songs I wanted. What can I do to correct it?

I have two songs I downloaded that are not the songs I wanted. What can I do to correct it?

Delet more content from your iphone or update via itunes on your computer.

"one or more of the items in your selection contains Aperture albums that are not supported in iphoto".

I have some folders in iPhoto called 'Recovered Folder'. When I try to delete them I get this message: "one or more of the items in your selection contains Aperture albums that are not supported in iphoto".
I don't use Aperture (did install it to try it out), and have deleted Aperture App from my Mac.
How can I get rid of these fodlers?

i finally figured this out:
fyi, iphoto and aperture can now share (i.e., access) the same library. apple details it here:
http://support.apple.com/kb/HT5260?viewlocale=en_US&locale=en_US
i use both iphoto and aperture, and i suspect something went amiss, at some point, while aperture was accessing my iphoto library.
this is how i fixed the problem:
i launched aperture, then (per the instructions linked above) switched to (i.e., accessed) my iphoto library. i was then able to delete the "recovered folder" and the album it contained. i then quit aperture and relaunched iphoto.
NOTE: at that time, although i expected the "recovered folder" to be gone, it was still present. but this time, i was able to delete the folder from within iphoto without the "contains aperture items" error message.
(Sparky030405, i realize you've since deleted aperture. while i can't say my method is the *only* way to solve this problem, it's the way i was able to solve it. so, you might consider reinstalling aperture in order to delete the folder, then uninstalling aperture, once again.)

JSF: Error Message are not getting cleared

Hi,
I am facing some problem with error messages in JSF.
Here is what I am doing
1. User submits a form, server validates and sends back the error to the client error message added to Faces Context.
2. User checks the messages, changes the input and submits. assuming everything is correct now.
3. On server, it validates and writes data to response for download using the following code.
FacesContext faces = FacesContext.getCurrentInstance();
    HttpServletResponse response = (HttpServletResponse)faces.getExternalContext().getResponse();
    DownloadResponse.sendDownload( response, is, fileName );
    faces.responseComplete();
}4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen.
It seems I am missing something in JSF req-response life cycle. Anyone please point out the mistake.

SudhirMongia wrote:
4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen. Wrong. The problem is that the view is not rerendered, which makes sense because you are not sending view content to the browser but your file.
Your real question probably is: how do I cause a file download and still rerender the view afterwards to show the results? To that I myself do not have the answer unfortunately, but I have seen that question come by a few times already, so doing some searches in these forums may yield you an answer.

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

If you'd asked a question in your original post it might have solicited more pertinent responses. As it is, you were stating a fact. No one knew whether you considered that fact a problem, or what you were hoping to gain by doing so.
The simple addition of 'can anyone help me fix this so I can run Terminal' would have counted for a lot.
As it is, your solution is likely to require the Terminal, so you're going to need to fix that one way or another. The simplest would be to create a new admin account (System Preferences -> Users & Groups) then log in using that account.
Then try and launch the terminal. If that works the problem is specific to your original account and can likely be fixed via some command-line tweaking. I'd start with:
dscl . read /Users/<username>
(where <username> is the short name of the account having a problem). This will show the records in the directory data for your account, one of which will be UserShell. Chances are that value is invalid, or missing, and can be corrected via:
sudo dscl . -change /Users/<username> UserShell <currentValue> /bin/bash
(where <currentValue) is the current setting for UserShell) which will change the user's shell to /bin/bash (the default).
Of course, you might already know this and already tried, but since you didn't say so in your original post it's worth checking.

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

Best approach to delete records that are not in the source table anymore.

I have a situation where I need to remove records from dimensions that are not in the source data anymore. Right now we are not maintaing history, i.e. not using SCD but planning for the next release. If we did that it would be easy to figure the latest records. The load is nightly and records are updated and new added.
The approach that I am considering is to join the dimension tables the the sources on keys and delete what doesn't join. However, is there perhaps some function in OWB that would allow to do this automatically on import so it can be also in place for the future?
Thanks!

Bear in mind that deleting dimension records becomes problematic if you have facts attached to them. Just because this record is no longer in the active set doesn't mean that it wasn't used historically, and so have foreign key constraints on it in your database. IF this is the case, a short-term solution would be to add an expiry_date field to the dimension and update the load to set this value when the record disappears rather than to delete it.
And to do that, use the target dimension as a source table, outer join it to the actual source table on the natural key, and so your update will set expiry_date=nvl(expiry_date,sysdate) to set to sysdate if this record has not already been expired on all records where the outer join fails.
Further consideration: what do you do if the record is re-inserted into the source table? create a new dimension key? Or remove the expiry date?
But I will say that I am not a fan of deleting records in most circumstances. What do you do if you discover a calculation error and need to fix that and republish historical cubes? Without the historical data, you lose the ability to do things like that.

How to get rid of pix in my iphoto library that are not imported?

I needed to clear the memory card of my husband's camera recently, and didn't have the canon software installed on my computer. So I tried using iphoto, but it crashed because the movies are high resolution and I guess iPhoto couldn't handle it. I managed to get them transferred another way, but now every time I launch iPhoto I get a message telling me that there are images in my iPhoto library that are not imported, and asking if I want to import them. If I try to import them, iPhoto crashes again. If I say "cancel" I get the same message again next time. I tried going into the finder to get rid of them but don't know where they are. No matter what I try to throw away, I still get the same message. How to get rid of those photos?

and didn't have the canon software installed on my computer.
You could also have used Image Capture in your Applications Folder.
but it crashed because the movies are high resolution and I guess iPhoto couldn't handle it.
iPhoto managed high resolution just fine. Perhaps you don't have the correct codec.
To solve you more immediate problem: go to your Pictures Folder and there you'll see your iPhoto Library Folder. Open it and inside you'll see a folder called 'Importing' or something close to that. Drag it to the desktop. Restart iPhoto. Does that help?
Regards
TD

How can I download my past purchases that are not in my icloud? Somehow I lost songs that I purchased they say that the orginal files are gone but I did not delete them

How can I download past purchases that are not in my icloud? Somehow I lost songs it says that the orginal files can not be located. They are still available in the store but it doesn't give me the option to download them. I did not delete any songs or files but I am missing a lot of files

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
If you have to resort to trying to pull back the library from your iPod see Recover your iTunes library from your iPod or iOS device.
Note also that if iTunes has an entry for a song, even if that entry is broken, then it won't offer that track for download since it "thinks" you already have it. If you can't find the original files or recover them from a device, then you may need to delete the broken entries, close iTunes and reopen before you can access the past purchases.
tt2

Best way to obtain records that are NOT in another table

I have two rather large tables in oracle. An Account table that has millions of rows. Each account may be enrolled into a particular program and therefore can also be in an Enrollment table, also with millions of rows. I'm trying to find the most optimal way to find any accounts in ACCOUNT that are NOT in the Enrollment table.
I was doing something like this:
select /*+ index(ACCOUNT idx_acct_no) */
a.acct_no
from ACCOUNT a
where a.acct_no not in (Select e.acct_no from ENROLLMENT e);
This takes a VERY long time to execute, even though I am using the index.
I even tried to use the PK on the ACCOUNT table, as it is also a FK on the ENROLLMENT table as such:
select a.acct_no
from ACCOUNT a
where a.id not in (Select e.id from ENROLLMENT e);
this too takes too long to get back (if at all).
Is there a better way to do this selection please?

Well if you have the energy to type in the whole list, the syntax you've given will work, unless you blow the permitted number of elements.
But a practical solution would be to turn the list into a table. You still haven't got the hang of this "giving us enough information" concept, so let's presume:
(1) you're on a version of the databasse whoch is 9i or higher
(2) you have this list in a file of some sort.
In which case use an external table or perhaps a pipelined function to generate output which can be used in a SQL statement.
If neither of these solutions works for you please provide sufficient information for us to answer your question correctly. Your future co-operation is appreciated.
cheers, APC

Business Rule error: Accounts are not available in the rule table

Hi everybody,
I have a problem running the Business Rule for the profit/loss copy to the equity account.
The Business Rule I set reads from all P&L accounts, P&L specific flow, acual category, all datasources and then it writes everything keeping the source settings apart from the account destination (the equity profit/loss account) and the flow destination (I write in two different flows, so the rule is made up of two equal lines differing only in the flow destination). "PROFIT" is the ID I chose.
Then I created the related script logic (ID=CALCACCOUNT):
*RUN_PROGRAM CALC_ACCOUNT
CATEGORY_M = %CATEGORY_M_SET%
CURRENCYLABEL = %CURRENCYLABEL_SET%
TID_RA = %TIME_SET%
CALC=PROFIT
*ENDRUN_PROGRAM
Finally, the prompt ( process chain: CPMB/RUNCALCACCOUNT):
PROMPT(SELECTINPUT,,,,"CATEGORY_M,CURRENCYLABEL,TIME")
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SUSER,%USER%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPP,%APP%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SELECTION,%SELECTION%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,LOGICFILENAME,CALCACCOUNT.LGF)
But anytime I run the package it fails giving me the message error: "Accounts are not available in the rule table".
I tried every possible change but nothing; if someone could help me somehow I'd be really grateful!!
Thanks
Filippo

Hi James,
Thanks for your quick response. There is no currency dimension in the application... I've tested with the correct businessrule as CALC value, but this didn't do the trick.
Any other suggestions?
Regards,
Vincent

Organizing photos that are not in proper date sequence

Is there an easy way to re-organize photos that are not in the proper date sequence? Do I eventually have to do each photo manually?
Thanks

You can drag them into the sequence you prefer in an Album (but not in an Event).
You can correct the time using the Photos -> Adjust Date and Time Command
Regards
TD

Error: You are not a receiver of the work item in Leave Request Deletion

Hi All,
We are using customized leave request workflow which is the copy of standard leave request workflow.
All tasks are assigned as general tasks and assigned in SWFVISU.
But the employees are unable to delete the leave request with Sent status.
Scenario:
Employee applies leave.
Now when the employee tries to delete / cancel the leave request before approval (Status is SENT), the employee is getting the error
"You are not a receiver of the work item".
This issue is happening for only the leaves which are in "SENT" status and though the employee is able to delete the "REJECTED" leave requests. The employee is also able to change / modify the leave requests without an issue.
We are on EHP 7 with SP level 22 and running this on Portal 740.
I have gone through the threads related to this issue but did not get any success.
Please let me know if I am missing something that can resolve the issue .
Regards,
Anurag

Hi Sid,
As I mentioned above, we are on EHP 7 with SP 22 and hence the above note 1066288 does not apply in our case.
Moreover, we're using WDA based application and the above note seems to be the one for XSS based on WDJ.
Regards,
Anurag

Correcting OCR errors that are not "Suspects"

Similar Messages

Maybe you are looking for