Cost distribution within the group companies

Hi Experts ,
Need your thoughts on what would be the best approach for the scenario explained below :
We have a parent company and three other companies within the group. In total 4 company codes. There are some expenses which are booked under parent company and should be later (at month end ) to be distributed at fixed % to the other 3 companies within the group as during the time of entry it is not feasible to separate the transaction at co code level or is time consuming activity. In what way we can distribute such cost and ensure it reflects in FI reporting  also so that P&L shows correct distributed values. Also there are some assets which are commonly shared by all the assets so the depreciation also needs to be shared with the companies in the group. ECC 6.0 being implemented . I tried using distribution but is not giving desired result.
Thanks
Sunil

Hi Sunil Mane,
What cost objects distribution between different company codes?
T-CODE:OKKP  Have you selected cross-company-code cost accounting? I think this is a preconditon of cost distribution  between different company codes.
BR

Similar Messages

  • Can you suggest a group messaging app where recipients can't see all the phone numbers within the group?

    Can you suggest a group messaging app where recipients can't see all the phone numbers within the group?  My friends are complaining that they can see all the people in the group; also when I get a response from some in the group, it comes to me ane many others in the goup - its like they've replied all. 
    Any help would be appreciated.
    iPhone 4; iOS5

    Sorry it hasn't worked out for you. I threw together a simple project that uses rectangles to represent your Bike and wheel groups. They all animate across the canvas in the bike group and the wheels rotate. I have attached screen shots so you can see how they are constructed.
    This image showsthe bike group where the orange rectangle and green circle represent the frame. The white rectangles represent wheels and the green and red rectangles I threw in to represent a wheel that has multiple objects in its group as your wheels do.
    Here the animation across the screen has started and notice all wheels rotating and staying with the frame.
    Again a little further down the timeline.
    I put this one in so you could see the group bounding box around the red and green wheel Good luck with your restart on this project and I hope these screen shots are helpful.

  • Script for: Getting the closest price within the group

    Hello
    I need some help for my script.I would like to add new field . Do you guys have an idea any OLAP functions .
    It was my simple script which doesn't give the answer I want.
    SELECT
    NO,
    SUM_QTY,
    QTY_QUOTED,
    CASE WHEN QTY_QUOTED < SUM_QTY
    THEN MAX(QTY_QUOTED)
    WHEN QTY_QUOTED = SUM_QTY
    THEN QTY_QUOTED
    WHEN QTY_QUOTED > SUM_QTY
    THEN MIN(QTY_QUOTED) END AS CLOSEST_Q
    from table1
    GROUP BY NO, SUM_QTY, QTY_QUOTED;
    output for the script below:
    No SUM_QTY QTY_QUOTED CLOSEST_Q
    567     3     2     2
    567     3     99     99
    130     140     156     156
    123     515     40     40
    911     120     600     600
    911     120     800     800
    567     3     3     3
    567     3     5     5
    911     120     700     700
    130     140     138     138
    130     140     12     12
    123     515     2     2
    I would like to see the last field below:
    No Sum_Qty Qty_Quoted The Field I want to have or  The other way I want to see
    ==== ======= ======== ================ ==================
    123 515 40 x 40
    123 515 2 40
    567 3 5 3
    567 3 2 3
    567 3 3 x 3
    567 3 99 3
    911 120 600 x 600
    911 120 700 600
    911 120 800 600
    130 140 12 138
    130 140 138 x 138
    130 140 256 138
    I willl appreciate if you can give any clue /solution or idea.
    Thanks a lot,
    Pinar

    [That script|http://discussions.apple.com/message.jspa?messageID=11012484#11012484] could change the Online Status of all mail accounts. The following one will just report their Online Status. Is this what you are (were) asking for?
    --BEGINNING OF SCRIPT
    tell application "Mail" to activate
    tell application "System Events" to tell process "Mail"
    set theMenu to menu "Mailbox" of menu bar 1
    if enabled of menu item "Take All Accounts Online" of theMenu then
    return "All accounts are currently offline"
    else
    return "All accounts are currently online"
    end if
    end tell
    --END OF SCRIPT

  • Disabling the cost distribution button on the Process Purchase Order Screen

    This is probably a simple question, but we have been unable to find the place to disable cost distribution on the SRM Process Purchase Order screen for limit orders ONLY.  Basically, we just want this functionality to not be available to users.  Can anyone direct us to the correct configuration for this?  Or do we need to edit the BADI?
    Thanks  in Advance!

    Hello,
    You can hide this field by creating a screen variant through SHD0 transaction. I have tested here and I
    could hide it (GV_DIST_IND in Program SAPLBBP_PDH_ACC screen 1000).    
    In the screen variant you should mark the output of GV_DIST_IND field.
    However, this option would hide this button for all documents.
    Kind regards,
    Ricardo

  • Cost distribution on infotype 15

    We have our cost distribution assigned to our positions; we do not use IT0027.  In some cases, we want certain types of payments to be posted to a specific cost center and fund.  We enter these payments on IT0015.  When I try to use the maintain cost assignment on the infotype, I get the following message:
    "Account assgn Functional Area is active in HR on 09/06/2009 and must therefore contain a value"
    The functional area is also set up on the cost distribution at the position level.  What are we missing that is preventing us from using this functionality on IT0015?
    Thanks in advance for the guidance!!

    Thanks.
    The functional areas are defined using transaction PO13, infotype 1018, field FKBER.
    I removed the cost distribution on the position and left only the account assignment, IT1008, on the position.  I tried entering the cost distribution on IT0015 with and without an IT0027, and I receive the same error message as before.

  • IOS 8 - contact's responses to a group message where I am included being placed in individual thread as opposed to the group thread?

    Has anyone experienced this issue?  Here's an example of what is happening:
    A group message is initiated by my friend that includes myself and 2 Android users.  All of us have group messaging turned on.
    Replies from one of the Android users do not get included in the group thread, but in that person's individual thread within Messages.  The other user's replies are included in the group thread.  My replies are also included in the group thread.
    If I turn off iMessages within the settings menu, the replies from the Android user that were previously going into the individual thread now are included within the group thread.  If I turn back on iMessages, the replies are separated again whenever they are sent, but only from the one Android user.
    Is this a problem with the way the iPhone handles group SMS/MMS messages, or is it an issue with my friend's Android device settings?  What makes me think it's an issue on my end is that things work as intended if I turn iMessages off.
    Thanks in advance for any help!

    Hi,
    In Group chats in iMessages it seems the iMessages server will not allow you to switch the ID being used for one of the contacts (there is no way to tell if the other people in the group chat know this info and whether the Contacts wants it to be known - at least that is the presumption).
    If you want to use his iPhone number then you will have to start a new Chat.
    If his Apple ID is on  his iPhone and of course on his Mac then it can be the case that iMessages will "offer" the pop ups to enable the ID again.
    I find they arrive when I want to do something else and I have to almost dismiss them  to proceed.
    I find that this will activate a Second Apple ID on a second iPhone or the second iPhone number will suddenly appear Active on the Mac's settings for the iMessages account.
    8:16 pm      Sunday; June 29, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • KSV5 costs distribution

    Hi
    please, I have a problem with distribution of cost between cost centers. My situation is:
    Phone call cost distribution at the end of month with KSV5.
    Statistical key - with atribute "total values" - it changes every period (like phone calls minutes changes).
    Vendors invoice posted on 101001 cost center (100 USD).
    Cost distribution - sender:     101001 (100 USD)
    Cost distribution - receivers: 101001 (10 USD), 101310 (50 USD), 101313 (20 USD), 101315 (10 USD), 101319 (10 USD).
    Period April 2011
    Distribution goes well.
    Question is: when the sender CC is also a receiver CC, some amount (10 USD) of the cost stays on the CC 101001, but when I run the distribution for period May 2011 for 200 USD, will be the 10 USD (that is still on the 101001 from April) included into the distribution cycle? So distribution run will be with 210 USD??
    Or in the distribution cycle only invoice (or invoices) posted into period of May will be included?
    I´m in doubts with this. Don´t know if i should make a new CC that vendors invoices will be posted on and it will be only sender in the cycle that will have a zero balance after the cycle.
    Please advise
    Thank You.
    Regards
    Lubos

    Hi,
    When you execute KSV5 cycle for May, you can give period 5 to 5 in the main screen
    So, system considers only May balance for distribution, in your case it is 200 USD.
    Rgds
    Murali. N

  • AAA:How to separate the group authentication on Switches through Radius/Tac

    Hi,
    Currently my ACS is being integrated with AD and all the users can access my IOS devices (configured AAA). I only need one group in my AD to access my IOS devices and another group to use VPN access or any other authentications.
    Can anyone tell me how to restrick all other groups in AD to access my network devices except one group in AD which I only want to allow access to my network devices.

    I wanted to do the same thing with the Active Directory where I only wanted on group called "network admin" to have access to my switches. I have 3 ACSs appliances and 100 switches. This is my setup.
    On the ACS Create a "Network Device Group" under NETWORK CONFIGURATION. I called this group "TACACS+ Switches".Once the group is created add all your AAA clients which are your switches.
    (you can accomplish that by first going under INTERFACE CONFIGURATION-click on "Network Device Groups" this will enable the ACS to allow you to create "Network Device Groups" also check the "Group-Level Access Restrictions")
    Then click on GROUP SETUP. edit the 0:default group and disabled that group.Then select a agroup available from the group list and rename the group "Network Admin" and map that group against the AD group named "Network Admin".
    Once that group is correctly mapped.Go back to GROUP SETUP and edit the "Network Admin" group.Within the group you will see an option called "Netwrok Access Restriction (NAR)"
    Click the option DEFINE IP-BASED ACCESS RESTRICTIONS. From The AAA Client drop down menu select the "NDG:TACS+ SWITCHES" for the port enter "*" (asterick) for the address you can specified the the network in whic the switches are residing in my case I used "10.*.*.*" the wild cards will allow any network on the 10. network. then click "enter"
    This is a high level overview on how I did my setup. Remember to properly define your AAA statement under your Cisco IOS switches.
    I hope this help!!

  • HR Cost Distribution Reporting in BW

    All,
    I have a question in regards to cost center cost distribution and the ability to report accurately any distribution changes.  My situation is more specific to HR positions and cost distributions changing over time.
    Example of reporting requirement:
    Given an entire calendar year there is a need to calculate the salary costs per cost center A and B.  For the first six months, Position 1 is assigned to CC A for 50% and CC B for 50%.  The last six months Position 1 is assigned to CC A 100%. 
    How is it possible to accurately calculate each CC's salary cost for a given year?
    Note: For a given position an employee is assigned and has a specified annual salary. 
    Thanks,
    DC

    Yes, as there you'll receive costs according to set rules (or you'll see that rules are not correctly applied and will have to go back to R/3 and see why )
    EDIT:
    Don't know if you'll have the HR position available (maybe in line item datasource) but you'll definitely have the salary amount by month and cost center.
    Message was edited by:
            Pabloj

  • Cost distributions for ER taxes

    Hi,
    Let me explain the issue with an example.
    For-Period June u2013 Cost distribution 'C1'
    In-Period July u2013 Cost distribution 'C2'
    June salary 5000 was retroactively increased in July to 6000. The net
    difference = 6000 - 5000 = 1000.
    This difference of 1000 is posted as per the June cost distribution C1.
    This net difference is added to July salary 6000 + 1000 = 7000. The
    total taxes including the additional taxes (Example: ER Social Security
    taxes) on retro amount 1000 are posted as per the July cost
    distribution C2.
    The taxes should have posted to June cost distribution C1.But since
    they are calculated in July,they get posted to July cost distribution.
    This is an issue. The salary and the taxes both are posted to
    difference cost distibutions.
    Just wanted to find out how you are handling this situation.
    Thanks!
    Ratna

    Hi Ratna,
    I also facing the same scenario as yours.
    Below is the sample:
    In March, the cost centre C1 has IT14 allowance $250.00.
    In April, I added another cost centre C2 in IT0027. I increased the IT14 allowance amount from $250 to $550, meaning there is retro of $300.
    When I executed the payroll posting in April, the retro amount $300 posted to Cost Centre C1 and C2.
    The retro amount should have posted to Cost Centre C1 but it didn't work as what I expected.
    Since I found this forum, I would like to know how you handle this scenario.
    FYI, my client is using SAP 4.7 (SAP R/3 Enterprise).
    Thanks.

  • Infoset query of vendor payments at the cost distribution level

    We would like an infoset query of vendor payments at the cost distribution level of the document.  The issue seems to be joining vendor to the document cost distribution lines. 
    1.) BSAK + BSIK can be combined with an infoset data structure but only contain the vendor line of a document;  the cost distribution lines are not in the tables. 
    2.) BSIS + BSAS can be combined with an infoset data structure but lack vendor data and joins (to a vendor source) are not an option with data structures.  Vendor data added with an additional field is too slow to be a primary selection field. 
    3.) Logical data base KDF in an infoset returns only the vendor line of a document, not the cost distribution lines. 
    4.) Logical data base BRM in an infoset can have vendor from BSAK/BSIK attached by an additional field but performance is too slow to be useful.  Joins are not an option in a logical data base infoset.
    5.) Complete data is lacking when table joins between document cost distribution tables and vendor data tables are possible, (SPL actual line item table & BSIP or FMIFIIT & FMIFIHD).  BSIP lacks AB documents (reversals).  FM tables lack general ledger only documents. 
    6.) BSAK and BSIK together have complete vendor data but joins of both to a basis table do not work well.  Left outer joins are too slow, inner joins won’t work since the tables have mutually exclusive data. 
    It would be ideal to have vendor in BKPF, like FMIFIHD has, but it isn't a field.
    Does anyone know of any other options?  I have seen the helpful thread on How to Read BSEG Efficiently

    Hi,
    This is SAP Business one reporting and printing forum. Please find correct forum and repost above discussion to get quick response.
    Please close this thread here with helpful answer.
    Thanks & Regards,
    Nagarajan

  • Infoset query of vendor payments at the cost distribution level of the document

    We would like an infoset query of vendor payments at the cost distribution level of the document.  The issue seems to be joining vendor to the document cost distribution lines. 
    1.) BSAK + BSIK can be combined with an infoset data structure but only contain the vendor line of a document;  the cost distribution lines are not in the tables. 
    2.) BSIS + BSAS can be combined with an infoset data structure but lack vendor data and joins (to a vendor source) are not an option with data structures.  Vendor data added with an additional field is too slow to be a primary selection field. 
    3.) Logical data base KDF in an infoset returns only the vendor line of a document, not the cost distribution lines. 
    4.) Logical data base BRM in an infoset can have vendor from BSAK/BSIK attached by an additional field but performance is too slow to be useful.  Joins are not an option in a logical data base infoset.
    5.) Complete data is lacking when table joins between document cost distribution tables and vendor data tables are possible, (SPL actual line item table & BSIP or FMIFIHD & FMIFIIT).  BSIP lacks AB documents (reversals).  FM tables lack general ledger only documents. 
    6.) BSAK and BSIK together have complete vendor data but joins of both to a basis table are not an option.  Left outer joins are too slow, inner joins won’t work since the tables have mutually exclusive data. 
    Does anyone know of any other options?

    Hi,
    This is SAP Business one reporting and printing forum. Please find correct forum and repost above discussion to get quick response.
    Please close this thread here with helpful answer.
    Thanks & Regards,
    Nagarajan

  • Monitoring servers in SCOM 2012 via different locals within the same management group

    Hi,
    I have 2 management servers in a same management group. The 1st one is having English (US) locale while other is installed on Swedish locale. Both are accessed by different users having same admin rights.
    Once a USER 1 try to register a server through authoring tab from 1st management server(installed on English locale), a profile/group wrt the server registered is created successfully but the USER on 2nd management server (installed on Swedish locale) can
    not see the same in Authoring tab. He can view it in Monitoring tab as as well as Administration tab.
    The Vice versa is also true.
    Does any one have idea that is it SCOM 2012's expected behaviour wrt 2 2 different users on 2 different locales within a same management group ?
    Thanks in advance.

    Hi,
    I am a little confused, what do you mean by "register a server through authoring tab"?
    Do you mean that when you discover a server on 1st MS with discovery wizard then you cannot see it on 2nd MS(and the vice versa)?
    As far as I know, all those information should be stored in the operation database which is shared to both MSs within the same management group.
    We may use SQL query to find the discovered server on the operation database. Please also check operation manager event logs to get more information to troubleshoot this issue.
    Regards,
    Yan Li
    Regards, Yan Li

  • How to run the Invoices in different groups within the batch in AP

    Need to know that how to run the Invoices in different groups within the batch. This will be of very helpful when we deal with lot of lines under one batch. (e.g) like somewhere we issued a Corporate Card to all the employees Via Bank Of America. Every Month they will send the complete details of all the employees who ever swiped the corporate provided BOA. Accordding to Natco all those lines should be loaded as One Invoice so that a Single Payment can be provided to BOA and it will also makes their life easier. This standard program sometimes it works normal sometimes it will run like a TORTOISE. So thats why in the manual they suggested to use GROUP ID to split the Invoice Load.
    So plz tell me how we can run it
    plz give me the solution
    thanks

    can you give me some material or document on that so that i can read actuaaly i need to make doc on it..

  • Hours not populated in the Table C1 (Cost Distribution) in Time Evaluation

    Hi All,
    I am entering Time info along with the Reciever Cost Center, Internal Order and other info in the CATS Time sheet and transferring the saved details to HR Time Mgmt & CO. Later when I run Time Evaluation (PT60 using schema TM00) for the person his Cost Distribution info is getting populated in the Table C1.
    Then when I go to the Time Evaluation Results Table (B2 Cluster) thru transaction PT66 and want to check the details for the employee under C1. I see all the Reciever Cost Center, Internal Order  info. I double click on the TReciver Cost Center to see how many hours getting charged to it, it shows 0.000
    even thogh I had entered 4.00 hours against the Reciever Cost center in CATS.
    Can someone direct me in a step by step way as to how to overcome this anamoly.
    Your suggestions are highly welcome.
    Regards,
    Aslam

    Hi,
    I hope you are using transaction CATA to transfer to HR and Controlling.
    When you transfer entries from CATS to HR to which Infotype the hours get transfered?
    Could you clarify me on this?

Maybe you are looking for