Could Anybody help me with this Mail problem? (Screenshot attached)

Hello dudes,
Is there anychance anyone could help me out with this slight problem? Everytime i try to take my accounts online i get 'Connection Failed' This only started happening yesterday and i just can't seem to get it fixed.
Thank you!
Jamie Wright

Hi Linc,
I have tried doing that with no luck, I just tried receiving mail through another account on my system and for some reason that seems to be fine. It looks like it is just my Admin account that cannot receive mail.
Anything you could help me with?
Thank you.

Similar Messages

My Wi-Fi works, but after a while not anymore. Then I've to turn of on the Wi-Fi and turn it on after a few seconds. Can anybody help me with this annoying problem?

Hello,
My Wi-Fi doesn't work good. After a while it doesn't work and then I've to turn of the Wi-Fi and turn it on after a few seconds. Does anybody has this same annoying problem?
Jelle van Blokland.

Hi Jelle van Blokland,
Here is an article that has troubleshooting for Wi-Fi connections in iOS, including disconnecting:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Cheers!
- Ari

Can anybody help me with this quiz problem?

Hi everybody,
I'm newer on Presenter, but I can tell you that I've understood very well how to use it.
Well, I've finished my presentation on Power Point, created all quizzes and questions.
After I record the audio, the quizzes have problems. The answers didn't appear, the button labels also.
It's very strange because, before to record the audio, I've tested the presentation publishing on HTML5 and SWF and all quizzes were fine.
See the image:
I've tried many things: deleted all questions, cleared the temp files and also created new questions and nothing solved this problem.
It occurs in a preview mode and publishing in HTML5 and SWF too.
What's happening?
Should I re-install Adobe Presenter 10?
(UPDATED: I've re-installed it and the same problem happen).
Thanks.
Rafael Bohrer.

Hi Rafel,
PLease apply the following fix and check if it resolves the issue:
1. Click on the below link to download the patch :
Shared Files - Acrobat.com
2. Please download the zip file and extract it.
3. Please check the version of Presenter installed on your machine.
4. For 32bit: Please copy the PptImgExporter.dll from 32 bit folder and paste it under “C:\ProgramFiles (x86)\Adobe\Adobe Presenter 10.0”.
5.For 64bit: Please copy the PptImgExporter.dll from 64 bit folder and paste it under “C:\Program Files\Adobe\Adobe Presenter 10.0”.
6. Try to publish the project now and check.
Regards,
Mayank

Hi, why can't I use the iMessage on my iPhone? I've already had my apple id email on it but it keeps saying "waiting for activation" always like that. No progress. Could anybody help me on this? Cheers

Hi, why can't I use the iMessage on my iPhone? I've already had my apple id email on it but it keeps saying "waiting for activation" always like that. No progress. Could anybody help me on this? Cheers

I have an old iPod Touch with old software that can no longer be updated:
iOS version 6.1.6
I've been searching for a solution to my iMessage login problem for months and tried everything from those frustrating links and all the tips from other users.
Here is what finally worked:
1) Settings > Privacy > Location Services > On
2) Settings > General > Date & Time > Set Automatically > On
3) Reboot device until Apple logo appears
4) Settings > Messages > Sign In

I can't sign into iTunes on this pc so I can authorize it. I wan't to do this so I can transfer purchased iTunes music on my iPad mini to this pc. When I try to do this the response I get is just to try again later. Can anybody help me with this?

I can't seem to sign into iTunes on this pc so that I can authorize it. I want to do this so I can transfer purchased iTunes music on my iPad mini to this pc. The response I keep getting is to try again later but its been days so I don't think that is the problem. I know I am using the correct user name and password so I don't know what's wrong. Can anybody help me with this?

Hello
It seems as though your account has been hacked.
please contact Skype customer service and change your password.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

HT1494 hi....i cant continuously play my music with my ipod nano....i tried a lot with the settings for wake time but still it is pausing the music path.Please anybody help me with this issue

hi....i cant continuously play my music with my ipod nano....i tried a lot with the settings for wake time but still it is pausing the music path.Please anybody help me with this issue

Is this your problem?
iPod nano (6th generation): Music stops when display turns off
B-rock

I urgently need a contact email for the sales team can anybody help me with this

I urgently need a contact email for the sales team regarding an outstanding query, can anybody help me with this please? Thanks in advance.

Hello
Welcome to the EE Community! I'm afraid there isn't an e-mail you can contact the EE Mobile Sales team on, but here's how you can get in touch with them:
If you're on Twitter, you can tweet them @EE, however If you'd prefer to talk to someone, you can dial:
150 from your EE mobile phone
If you're ringing from another phone, it's 01707 315000
For handy text codes & more, check out this page: http://ee.co.uk/help/get-in-touch Cheers,
Titanium
Was my post helpful? Please take 2 seconds to hit the 'Kudos' button below

I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Please help me with this strange problem again!

Hi gurus,
I can't, for the life of me, figure out why this does not work in a procedure but works in an anonimous block.
The XML is like this (part of it),
<CaseNotification messageProducedDateTime="2005-07-20T13:58:11-05:00" xmlns="http://www.courts.state.mn.us/CourtXML/2.0.0">
               <NotificationAdminHeader caseNumberKey="87CR0569" xmlns="http://www.courts.state.mn.us/CourtXML/2.0.0">
                    <CaseCountyIdentifier>87</CaseCountyIdentifier>
                    <CaseLocationText>Yellow Medicine County</CaseLocationText>
                    <BaseCaseTypeText>Adult</BaseCaseTypeText>
                    <CaseCategoryText>Criminal</CaseCategoryText>
                    <PartyIdentifier partyKey="854">
                         <PartyCaseAssociationText>Jurisdiction</PartyCaseAssociationText>
                    </PartyIdentifier>
                    <PartyIdentifier partyKey="123637">
                         <PartyCaseAssociationText>Defendant</PartyCaseAssociationText>
                    </PartyIdentifier>
               </NotificationAdminHeader>
               <InterimConditionsNotification>
                    <TriggeredDateTime>2005-07-20T13:57:53-05:00</TriggeredDateTime>
                    <NotificationEvent>InterimConditionsDeleted</NotificationEvent>
                    <InterimConditionsOrder orderEventKey="1760110">
                         <OrderDate>2005-07-20</OrderDate>
                         <OrderedBy judgeKey="00001J">
                              <JudgeName>
                                   <PersonGivenName>John</PersonGivenName>
                                   <PersonMiddleName>P.</PersonMiddleName>
                                   <PersonSurName>Smith</PersonSurName>
                                   <PersonFullName>Smith, John P.</PersonFullName>
                              </JudgeName>
                              <JudicialAgencyIdentifier>MN011015J</JudicialAgencyIdentifier>
                         </OrderedBy>
                         <CourtCaseNumber documentVersion="1" effectiveDateTime="2005-06-06T00:00:00-06:00">
                              <MNCISCaseNumber>
                                   <CountyNumber>87</CountyNumber>
                                   <CaseType>CR</CaseType>
                                   <YearFiled>05</YearFiled>
                                   <SequenceNumber>69</SequenceNumber>
                              </MNCISCaseNumber>
                              <CaseNumberIdentifier caseNumberKey="87CR0569">87-CR-05-69</CaseNumberIdentifier>
                         </CourtCaseNumber>
                         <ConditionSubject>
                              <Party partyKey="123637" currentNameIndicator="true">
                                   <StandardName>
                                        <PersonGivenName>Clanry</PersonGivenName>
                                        <PersonSurName>Ogavitz</PersonSurName>
                                        <PersonFullName>Ogavitz, Clanry</PersonFullName>
                                   </StandardName>
                                   <PartyCaseAssociationText>Defendant</PartyCaseAssociationText>
                              </Party>
                         </ConditionSubject>
                         <InterimConditions>
                              <InterimConditionText>Anger management</InterimConditionText>
                              <InterimConditionAmount>0</InterimConditionAmount>
                         </InterimConditions>
                         <InterimConditions>
                              <InterimConditionText>Attend AA (Alcoholics Anonymous)</InterimConditionText>
                              <InterimConditionAmount>5000</InterimConditionAmount>
                         </InterimConditions>
                    </InterimConditionsOrder>
               </InterimConditionsNotification>
          </CaseNotification>
The code is basically the same except that in the procedure the passing clause gets a differnt param, which is the passed in param from the procedure.
xmltable
                         xmlnamespaces
                         ---     'http://schemas.xmlsoap.org/soap/envelope/' as "saop",
                              'http://www.courts.state.mn.us/CourtXML/2.0.0' as "ic"
                         'for $ics in //ic:CaseNotification/ic:InterimConditionsNotification/ic:InterimConditionsOrder[@orderEventKey = $val/oeKey]/ic:InterimConditions
                         return
                         <ic:ICS>
                              <ic:ICSText>{$ics/ic:InterimConditionText}</ic:ICSText>
                              <ic:ICSAmount>{$ics/ic:InterimConditionAmount}</ic:ICSAmount>
                         </ic:ICS>'
                         passing p_XMLDoc, xmlelement("oeKey", v_OEKey) as "val"
                         columns
                         ICSText          varchar2(100)      path '/ic:ICS/ic:ICSText',
                         ICSAmount     number           path '/ic:ICS/ic:ICSAmount'
The strange thing is the procedure gets the ic:ICSText with the namespace value, which is http://www.courts.state.mn.us/CourtXML/2.0.0, so the finaly result is
the whole thing: <InterimConditionText xmlns="http://www.courts.state.mn.us/CourtXML/2.0.0">Anger management</InterimConditionText>.
I get the correct values when testing with the anonimous code!
What did I do wrong? Please help!
Thank you.
Ben

Hi gurus,
OK, I did another test. I ran the same PL/SQL anonymous block that gets the correct element value in 10.2.0.3.0 and it gets the same wrong value: the element name plus the namespace value and the data itself. It gets the correct element value in 10.2.0.1.0 (my local database).
Could anyone help me with this?
Thanks!
Ben

TS2755 Whenever I send a message to another iPhone user via iMessage it is sending my Apple ID instead of my phone number. Could someone help me with this??

Whenever I send a message to another iPhone user via iMessage it is sending my Apple ID instead of my phone number. Could someone help me with this???

Check this article: iOS: About Messages
Additional Information
You can change your iMessage Caller ID setting on iOS devices in Settings > Messages > Receive At > Caller ID. Note that the Caller ID setting is used only for new conversations. If you would like to change the address from which messages are sent, first change your Caller ID, and then delete the existing conversation and start a new one.
iMessage responses will be sent from the address the recipient most recently messaged. For example, on iPhone you can receive messages sent to your Apple ID and phone number. A friend sends you a message to your Apple ID. Responses in this conversation will be sent from your Apple ID, even if your Caller ID is set to your phone number.

I want to delete OS X Lion and install OS X Snow Leopard again, can anybody help me with this?

I want to delete OS X Lion and install OS X Snow Leopard again, can anybody help me with this?

See Kappy's going back to SL from Lion guide.

Yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

Are the lines like psychedelic herringbone? If yes, I had that happen once, it was something serious, like the
Logic board. The good news is that it was fixed without any loss of data on the hard drive. Take it in to have Apple look at it ASAP. I took it to TekServe at the time, they are very nice about preserving your data and user library when possible.
Good luck and don't panic.

Iv got a new laptop and i moved all my music though home sharing from my old intunes onto my new one, but my iphone wont sync to the new itunes... could anyone help me with this?

iv moved all the music over thought home sharing... from the old itunes i was using but i want to be able to sync my iphone with the new itunes on my new machine but its saying saying syncing setp 1 of 1 and nothing happens... could someone please help me with this?

Copy the entire iTunes folder from the old computer to the new computer.

I try to restore my ipod mini 4gb but i get the 1437 error? can anybody help me with this problem?

ok i have had the ipod fr a while and when i try and restore it gives me the 1437 error? i have no clue what this mean, can anybody help me? when is specifys the ipods components like the name and capacity etc.. under capacity it says N/A? get back to me please i miss having an ipod:((

I wish I could offer a solution, because I too am about to go crazy trying to fix the same problem. I have tried everything in the support section, sometimes twice, to no avail. Now I have an empty ipod that won't connect to my computer much less iTunes.
Any suggestions?

Could anyone help me with this problem?

Hello!
I�m a working with JMS Tutorial of Jms.(J2EE 1.3.1). I follow all the steps of the tutorial, and when i write
"java -Djms.properties=%J2EE_HOME%\config\jms_client.properties SimpleQueueSender MyQueue 3"
The console shows me the following error:
"Exception in thread "main" java.lang.NoClassDefFoundError: Files\s1studio\ee\j2s
dkee1/3/1\config\jms_client/properties"
I don�t know hot to fix this error. The classpath, and all the variables are correctily defined. I use XP o.s., jdkse 1.4 and j2see 1.3.1, and i repeat, i follow the steps of the tutorial. Could anyone help me?
Many Thanks.
Note: Sorry for my poor English.

Well, it looks as if somehow your command window is converting periods into forward slashes, since "1.3.1" appears in the output as "1/3/1" and "jms_client.properties" appears as "jms_client/properties". That is why the file is not found. If you can figure out how to stop it from doing this, the java command should be able to find the file. I'm afraid I know nothing about Windows XP command windows, however.
I'm sorry not to be more helpful.
Kim Haase
Technical Writer
Sun Microsystems, Inc.

Could Anybody help me with this Mail problem? (Screenshot attached)

Similar Messages

Maybe you are looking for