Could HP support Team send/ship to me any Computer Hardware?

Hi,
I don't know if this is stupid question or not, but I really had to asked it here since I could find a way to get my prefered computer hardware parts below.
Since everything in Yemen is really bad, a customer cannot find their preferred computer hardware.
I don't know if this is stupid question or not, but I really had to asked it here since I could find a way to get my prefered computer hardware parts below.
I really looked for these hardware items below, however, I didn't find my them
1. Samsung 850 Pro 512GB 2.5-Inch SATA III Internal SSD (MZ-7KE512BW) $289.99
2.HP-Compaq 665329-001 SATA Blu-ray BD-R/RE Drive $88.71
3.Mikrotik Router (routerboard) RB2011UiAS-2HnD-IN $190
4.Patriot Supersonic Rage XT 32GB USB 3.0 Flash Drive Model PEF32GSRUSB $24
I have requested some HP spare parts below from HP Support Team in UAE(Dubai), they sent them to me Quotation of those items below::
1.HP Pavilion dv6 Battery 6cell
2.DV6 CPU Fan
3.DV6 Power Jack
I would now like them to send me if possible::
1. Samsung 850 Pro 512GB 2.5-Inch SATA III Internal SSD (MZ-7KE512BW) $289.99
2.HP-Compaq 665329-001 SATA Blu-ray BD-R/RE Drive $88.71
3.Mikrotik Router (routerboard) RB2011UiAS-2HnD-IN $190
4.Patriot Supersonic Rage XT 32GB USB 3.0 Flash Drive Model PEF32GSRUSB $24

Thanks a lot,
Yes, I also don't think they can go buy 3rd-party hardware and ship it to me. However, I asked this question since I am very upset from those online sellers who don't consider Yemen in their maps. So, all customers must request their needs from other closer countries.
Even the HP customer care team in Dubai, UAE, would not have sent me the HP battery, and CPU cooling fan if I had purchased my laptop from Yemen.
First of all, even before this upheaval, no shipping to Yemen at all.
Yes, there is a major political upheaval in Yemen right now, however, to move the Yemen to independent country, and not dependent on the Gulf Arab countries, such as Saudi Arabia, United Arab emirates, Bahrain, Kuwait, Oman, Qatar, even the US, the UK, France which originally are allied with and have been protecting those Gulf Arab countries.
I always ask myself why Amazon.com, eBay.com, and others ship to Gulf Arab countries, and they don't ship to Yemen????? I only saw that mydvddrive.com, dx.com are the only websites which can ship to Yemen, although I didn't try to order something from them for two reasons: first: I am afraid of not getting/receiving my orders since delivery address in Yemen is bad since Yemen doesn't have postal code. The other one is since they don't sell products I want to purchase.
Yemen is stereotyped as as dependent province to the gulf Arab countries, but it isn't correct. So, Yemen is even not considered in Time zone in almost all websites, however, Iraq(Baghdad), kuwait, UAE(Dubai), saudi Arabia(Riyadh), qatar (Doha), and Bahrain(Manama), and Oman(Muscat) are all considered. (Yemen is much lager than Qatar, Kuwait, Bahrain) However, it is not considered larger in the time zone, and Computer Brand agents, online sellers, so on.
To be honest with you that I even didn't see that Yemen is considered in the Time zone for this forum, however, kuwait, Riyadh (Saudi Arabia), Iraq are considered. why are only 'Iraq', Kuwait, Riyadh are considered as long as the time of Yemen is the same time for them?

Similar Messages

I ran into the follow error after trying to upgrade to the newest version of ITunes. "An application has made an attempt to load C runtime library incorrectly" I was direct to "Contact the applications support team for more information" Can any one help

I ran into a problem with iTunes after I upgraded to the latest IOS. I'm recieving the followig error messages, any help would be appriciated.
Microsoft Visual C++ Runtime Library
Runtime Error!
Programe C:\Program Files (x86)\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.

Hello mobleymarvin,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M.

Wouldn't it be cool if your could do iMessages from the iCloud browser on any computer?

I like the way you can start an iMessage conversation on one device and continue on another. It would be better yet if I could log into any browser, as I can with other iCloud stuff, and continue iMessaging from there. This means I could even message from my [Windows XP] work computer (I don't get a choice), even where I don't have cellphone signal to use my iphone or ipad.

Tell Apple, not us.
http://www.apple.com/feedback/icloud.html
iMessage works fine on Macs running OS X 10.8 Mountain Lion.

Service Desk: Can't find Support Team when creat.message in satellite syste

Hi all,
strange thing:
In service desk I customized the partner determination rule for the support team with the rule AC13200137.
(In the rule pretty much everything is filled with * )
a) when creating a message via transaction NOTIF_CREATE within solman itself, the support team can be determined without any problems.
b) when creating a message in a satellite system via ->Help ->Create Support Message, the message gets created in the solution manager, but the support team could not be determined.
In the action log for "when message is created, find
support team responsible" the protocol is red.
Details of the log:
- green: Date and time stamp
- green: Processing CRM_DNO_PARTNER_1 is started
- red: Rule container does not exist
- red: Actim could not be successfully executed
Any idea why this is acting differently ?
Thanks
Christian

hi,
It might be because of the buffer synchronization problem , you can try executing the program
HRBCI_ATTRIBUTES_BUFFER_UPDATE
in se 38 and see whether the responsiblites that you created are getting updated.Its because of the master data change and some time it take a longer time to get updated in the database .
Goodluck ,hope this is gets resolved
from,
Varghese

Send e-mail to support team.

Hello,
I created a action for sending e-mail to support team in SolMan, the action is display in actions of message, but your status is warning, and don't send e-mail. When I try execute action, view the message of error:
--> The Action Cannot Be Executed in the Dialog
Procedure:
If you want to execute the action in the document, you must change the Customizing settings of the action definition correspondingly.
I can't find this procedure.
Anybody can help me please.
Thanks a lot.
Att.
Rogério

Hi
have you configured the pfac rule which is called by ur action...(assuming u r using standard action for sending mail to support team)
Pls check this blog will solve ur problem
/people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination
Regards
Prakhar

I have been offered cc 2014 for 29.99 and its says contact the support team to see if I qualify - trying to get to the support team option by telephone just seems to send me in a loop - getting pretty disgusted with all the rigmarole just to get a somethi

I have been offered cc 2014 for 29.99 and its says contact the support team to see if I qualify - trying to get to the support team option by telephone just seems to send me in a loop - getting pretty disgusted with all the rigmarole just to get a something

This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

I can not update my version of itunes. When I install the message "Could not open key UNKNOW \ Instaler \ Products \ E84E5F4E55179FC488DCF773E79CCA45 \ SourceList \ Media. Make sure you have sufficient access to that key or contact the support team." Any

I can not update my version of itunes. When I install the message "Could not open key UNKNOW \ Instaler \ Products \ E84E5F4E55179FC488DCF773E79CCA45 \ SourceList \ Media. Make sure you have sufficient access to that key or contact the support team." Any tips on how to solve this problem?

If doesn't work try use the instructions below BUT in BOTH folders, first in SourceList and after in the Media.
Start>Run put regedit and press Ok.
1. Go to the key: HKEY_CLASSES_ROOT\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceLis t\Media
2. Right click in Media folder, select Permissions from the menu.
3. You will see that is no user, on the "Permissions for..." dialog box which appears next, press the "Add.." button and add in the "All"
4. Back on the first "Permissions for..." dialog box, click on each account in the top-list and make sure each has the "Full Control = Allow" and "Read = Allow" permissions
5. Click the "Advanced" button and the "Advanced Security Settings" dialog box appears
6. On the "Permissions tab" enable the checkmark box named "Replace all child object permissions with inheritable permissions from this object", then press the "Apply" button
7. On the "Owner" tab, highlight the "Administrators" name in the lower listbox, enable the checkmark box called "Replace owner on subcontainers and objects" and press the "Apply Button"

Send email to Support Team with "New" Status

Dear Expert!
My Service Desk can send email to message creator when support message have created("New" Status), but can not send email to support team. and Service Desk can send mail to Message Creator and Support Team when change Status into "IN Process". So now, I don't know why that's happen ?Please show me about that as soon as possible. Thank you very much
Thanks and Best Regards
Tru Hang

Hi,
Please refer /people/dolores.correa/blog/2007/09/18/sending-e-mail-from-support-message .
Check the last part : Other examples Send mail to Support Team .
Hope this may help you.
Regards,
Nibu Antony

Incident management send email to support team when message created

Hi! We are trying to configure the solution manager incident management (Service Desk). For the phase 1, we just try to see if
a alert or email can be sent to support team member (through either email or business workplace)when a incident message is created. Can someone give me some guide how to do this? Your help is very much appreciated!

Hi,
As Siva said, Configuration steps should be very similar between 7.0 and 7.2. Refer to the below Incident Management document
Process document for Service Desk - http://www.rbe-plus.ru/pdf/solman_ServiceDesk.pdf
https://websmp109.sap-ag.de/~sapdownload/011000358700001230062009E.pdf
Regards,
Arjun
Edited by: Arjun Venkateswarlu. on Jan 13, 2012 11:36 AM

Service Desk: Support team determination - Action Logs error

Hello experts,
I have customized the service desk functionality in Solman 7.0 EHP1 according to SAP help and the various (very helpful blogs from sdn). When I create a message from satelite system the "Support Team" field is already filled with the correct business partner, but when I look into the ACTIONS tab I see the following error message (red light) "Find support team responsible, when message is created". In the processing log I have the following entries:
"Processing CRM_DNO_PARTNER_1 Is Started"
"Action could not be successfully executed".
Additional no Email is sent to the BP SUpport team even I have customized it accourding to the blog from Tammy Powlas "Service Desk Support Team E-mail Notification".
When I open the created message in change mode and save the message (without any changes), then the email is sent correctly.
Can anyone give me a hint, what I did wrong.
Thanks in advance,
Thomas

Hi Thomas,
When the PDF is generated during the creation of the message, some information is not yet available to the smartform program, so most of the fields are not filled. In order to have the complete PDF, you have to send the e-mail after the document is completely created, which means using the processing time "Processing when saved" (and then you have to open the message and save), or via Job using the Processing time "Processing using selection report", and scheduling the job as mentioned by Cristiano. In this case no e-mail will be created immediately as you wish (I did not use "sent immediately" , but "created immediately", because it also depends on your SCOT job which will send the e-mail). In my case I did not need to send in the e-mail details such as System ID, SAP Component and System details to the Support team, only the message number, priority and description.
If you decide to schedule the job, create a variant as explained by Cristiano. Enter the Application CRMD_ORDER, Action profile, Action definition if you want to specify which action or actions you want to execute (if you only want to schedule the job for your email to support team action, put this action definition here), Promotion status "0", keep empty field Processing type (do not put INT for e-mail), and select Processing Time "Processing using selection report". Keep dates in blank. Set "Processing without dialog" on. It's very important that you configure your action to be executed via report, as I said in the beginning, otherwise the job will not work and you will have the "0 actions have been selected" message. Also schedule your job periodically with a very short interval if you have many messages created each hour. It also depends on your SCOT configuration. The CRM action job will only send the e-mails to the queue.
The business partner assigned to the user that holds the position below the org unit should be entered in the message processor field, but this should not cause any error in the action that determines the Support Team business partner, as this field is correctly determined. Did you configure any other action or BADI to fulfill the message processor automatically? The standard SLFN0001_ADVANCED_FIND_PARTNER action as far as I know will not do it. I have Solution Manager 7.0 with SP25 and I don't have any error message in the FIND_PARTNER action, it is all green.
If you did not create yet any action or BADI implementation for the message processor, and if you have only one business partner (person) assigned to your support team, as you described (one Org Unit, with one position and one member), you can do the following:
- Go to the Access Sequences definition and copy access sequence 0009 (organizational data: employee for an org. unit). In the Individual Accesses change the Source from Department to Support Team.
- Go to the partner determination procedure and for the SLFN0004 select the access sequence just created.
This access sequence uses Rule AC10000258 to determine the business partner Employee of an Org Unit.
Try to create a new message and check if it works. This rule does not work if you have many members below one support team.
You may also check SAP note [1041455|https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1041455].
Regards,
Raquel
Edited by: Raquel Cunha on Mar 3, 2011 4:30 PM

PS Store error, local support team refuses to help.

Hello everyone, Before I begin, please understand that I am not here to complain. I am not an upset customer on a rant. And I am not new to the service and the way Sony/PlayStation handle things. I simply want to report a few things 1) An error on PlayStation Store.
2) The inability of my local support team.
3) A solution to my problem. Now, on with it... On the 23rd of July I made a avatar purchase on the PlayStation Store using my PS3. I bought the avatar Deception IV TNP - Avatar Laegrinna. Here's a shot of my download list after the purchase. As you can see, Laegrinna avatar is on my download list. So I download it. However, when I got to select it on my avatar list, instead of Laegrinna I get the Allura avatar. Which is the wrong avatar. Now, since my account is based in Portugal, and I used the Portuguese Store, I contacted the Portuguese support team.After proving the needed information, I was asked to provide screenshots for further evidence. So, I did.
The next email I was asked to select the appropriated field on my avatar list and be sure to scroll down the list and look for it. I did, and replied back saying that it still not there. Now, up until this point I am a reasonable person. I understand why so many questions and the need for verification. They must first verify that what I'm saying is true. Fair enough. However, this is where I lose faith in my fellow country people.
Up until now I've been exchanging emails with one person. But now a second person replies back to me with detailed instructions on how to select an avatar for my account. Even though I already know how to do that, and had this person read the previous email chain they would have come to that conclusion, since I provided a screenshot of me accessing the avatar menu. This sent me straight back to the start. I feel like I've made no progress what so ever. Because now I had to explain the situation all over again to someone who's clueless of the entire situation.
I'm taking this to the English forums where hopefully there's more common sense.So here's the thing. I just want people to take responsibility over this error on the PlayStation Store. I was given the wrong item. I did not received what I paid for. I either want a refund, or the error fixed so that when I download it, I get what I paid for. It's not about the money, it's about principle. This was only a few cents. But what if it was an expensive special edition full game and the store instead gives the wrong game? I would obviously contact the support team, but for what? So that I can be told that there's nothing wrong and that I don't know how to download the correct game? I would be most grateful if someone could look into this situation. I am willing to provide further details if needed upon establishing contact. Thank you for your time. [UPDATE] After replying to the second person and explaining myself again, I've received a generic reply saying that my email has been directed to a different sector to deal with it.

DEKOWOLF wrote:
Appreciate the feedback! I'm afraid email is the only way I can contact the support team right now. I'm not living in Portugal. Thing is, I'm not even mad. Like I said, it's a simple matter of principle.Getting my problem fixed is the lower priority for me. What I want is someone higher up (like a Sony Europe HR department) to address the support team and tell them how to run their ship. Oh i see. Yeah I get what you mean.

Email to Support Team list

Hi
I have two Support teams, my requirement is
if Support Team A is selected then a mail should go a two different mail ids and similarly for Team B mail should be triggerred to other two mail ids.
I could able to do with single mail id by assigning it in the BP but not working for two mail ids.
If i create a different distribution lists then how can i link the Support team and the respective distribution list.
I have the support teams in Organization structure and automatic determination is also working perfectly.
In the action definitions --> Condiftions -- > Processing details i tried with the receipient type Organizational uint/position but it is also results in error.
Error log says that Invalid recepient
Kindly advice.
Edited by: Naveen on Mar 23, 2009 1:15 PM

Hi at all,
does anyone have another solution than creating an outlook distribution list an maintain this in the business partner? I don´t want to create 50 distribution lists and I don´t want to maintain organisational data in two different systems.
Isn´t there a way to determine the members assigned to a position and send a mail to their adresses?
Kind regards
André

Hi Support team, somehow my mozilla settings have been changed and it baceme transprenet, now how to change back to normal ?

Hi Support team, somehow my mozilla settings have been changed and it became transparent, now how to change back to normal because everything is transparent, menus, pages etc.

This could be the same problem other users are reporting as a white screen or black screen, caused by an incompatibility between Firefox 33 and some older graphics card/chipset drivers.
Please disable hardware acceleration as a temporary workaround. Step-by-step directions in this thread: https://support.mozilla.org/questions/1025438
Does that work?

I just bought a iTunes card and its not accepting it. It already sent it to the support team and they said they were going to get back to my within 24 hours and i am trying to buy a program in the app store for work. How can I expedite this process?

I just bought a iTunes card and its not accepting it. It already sent it to the support team and they said they were going to get back to my within 24 hours and i am trying to buy a program in the app store for work. How can I expedite this process?

Has it been 24 hours?
I take it this was a gift card. iTunes Store: Invalid, Inactive, or Illegible codes http://support.apple.com/kb/TS1292 - gift cards
I don't know if this provides an alternative means: https://expresslane.apple.com ; select 'iTunes' in the first column; 'iTunes Store' in the second column
If you are really desperate you could buy the app yourself, then request reimbursement.

How to create email to Support Team when NEW message created in SupportDesk

Hi there,
I have been sitting with this for a while now, and am quite frustrated. I want to know whether it is possible to generate an email notification to the Support Team in the Service Desk whenever a new message is created by the user. So far, the Org Structure is correctly set up in PPOMA_CRM. The rule CRM_DNO_1 (13200137) is configured and works. Application CRM_ORDER with Action Profile SLFN0001_ADVANCED is configured, and by standard config works by correctly determining the responsible Support Team per SAP Component whenever a new message is created. Lastly, I have configured my own Action Definition that sends an email to the user (Reported By) to notify him whenever the Status of the message changes (like to In Process or Confirmed etc), which works.
Now, whenever a new message is created by a user in the satelite system, it gets created in Service Desk and the Reported By, Sold-to-Party and Support Team are determined and the status of the message is NEW. When looking at the message in Service Desk under Actions, the only action assigned so far is the "SLFN0001_ADVANCED_FIND_PARTNER - Find support team responsible, when message is created" action. Now, the issue is this: how do you assign an action to the message straight after the Support Team determination, but before any other processing takes place in the message (meaning, you have to click on Change in Service Desk to start processing the message - when doing this, additional actions are assigned). I have created my own Action Definition (copy of SLFN0001_ADVANCED_FIND_PARTNER) and added another Processing Type after the Method Call (CRM_DNO_PARTNER_1) to email a Smartform (Processing Type = Smart Forms Mail) to the Support Team. But from here things just dont work - either it skips the Support Team determination, or it doesn't process the SmartForm type at all. Even by creating a standalone Action Definition and using Partner Determination / Function SLFN0003 (Support Team - almost same like to notify the Reported By about status changes to the message), this newly-defined action doesn't even list under Actions in the message whenever a new message is created. Only after clicking on Change in the message does this action for the first time list and execute, which is pointless - you don't want someone to open the message first and change it to enable notification of the Support Team of a new message; this should happen as soon as the message gets created.
So, if there is anyone out there who has done this before, please help, it would be much appreciated.

Gavin,
I managed to get this working in our system.
This is what I did:
   - action ZSLFN0001_ADVANCED_FIND_PRTNR (copy of SLFN0001_ADVANCED_FIND_PARTNER): changed in processing type the method to ZCRM_DNO_PARTNER_1 which I created as described in note 1041455. The Sort Order of this action has the same number as the original action of SAP (nr. 10 in my case).
   - I created another action Z_MAIL_TO_SUPPORTTEAM_OPEN with Sort Order one higher than the previous (nr. 11 in my case).
Processing Time: When saving document
Processing Times not permitted: No Restrictions
Sort Order: 11
Schedule Automatically
Partner-Dependent: SLNF0003
Determination Technology: Using Conditions that can be Transported
Rule Type: Workflow Conditions
Action Merging: Max. 1 Action for Each Action Definition
Processing Type
              - Form Name: ZFORM
              - Processing Class: CL_DOC_PROCESSING_CRM_ORDER
              - Processing Method: CRM_SRVORDER_EXEC_SMART_FORM
              - Archive Mode: Mail Only
Then I configured a Schedule Condition for Z_MAIL_TO_SUPPORTTEAM_OPEN: &CRM Service Process.User Status& = E0001ZSMSD001.
For me it's working like a ChaRM now
Hope it also solves your problem!
Best regards,
Roel

Could HP support Team send/ship to me any Computer Hardware?

Similar Messages

Maybe you are looking for