Could Not Change to that idenity Microsoft Outlook 2011

Hi,
I know there are a few other threads that have been created about this issue all over the web but I am racking my brain and pulling out my hair over this because nothing I have seen works!
Issue:
When I click on Outlook it opens an error which says "Could not change to that identiy. An unknown error has occurred in Outlook."
I click "Ok" and it brings up the idenity window. I can create a new identity or delete the old identity but as soon as I click "Ok" Outlook gives me the exact same error again.
After trying all onscreen options I click "Quit" and an error appears and says "An error occured while launching. An unknown error has occurred in Outlook."
Things I have tried:
Uninstall and Reinstall Office 2011 several times
Alt/Option and click to use Microsoft Database Utility
Rebuild does not change the result.
also tried running this directly from Launchpad
Moving "~/Documents/Microsoft User Data/" to the desktop and then running Outlook again.
I saw in this thread someone suggested creating a new user and then testing to see whether it worked when signed in as them. Guess what it does! the onlything is the thread is closed or for some reason I cannot reply, hence this new thread.
The person says it could be an issue with the user folder.
Where do I go from here?

I discovered that if I followed these steps in regards to my account name/user folder, it fixed the issue. I do not know why renaming the account/user folder worked by it fixed the issue for me. Hopefully this will give a different perspective for other people who have the same problem.
It also fixed these issues I noticed I was having:
An error when I open Excel or Word "There is a problem with the Office Database"
Microsoft Document Connection issue I had which was referencing the database.
Hope this ends some people's frustrations.
Also if anyone knows:
a more indepth explanation of this error
why this happened please post below!

Similar Messages

Mail could not be received at this time outlook 2011 for MAC

I am connected to Outlook 2011 MAC for 10 minutes then I get disconnected. I get this error message "Mail could not be received at this time. The server account for "cbcf" retuned the error "Logon failure unknown username or bad password" your username/password
or security settings may be incorrect. Would you like re-entering your password ?

Hello,
1.
Under the Account Settings tab, the
Exchange Server field.
https://my.internal.owa.server.name/exchange/[email protected]
Be sure to use
/exchange/ rather than some other directory, and
include your full email address afterwards.
2.
On the Advanced tab, for the
Public folders server, I use this URI:
https://my.internal.owa.server.name/public/[email protected]
Once again, use
/public/ not some other directory.
For more reference about the symptom:
http://www.mackb.com/Uwe/Misc/SR.aspx?p=Logon+failure+unknown+username+or+bad+password++mac
You can also create a new thread on the Entourage forum blow:
http://www.officeformac.com/ProductForums/Entourage/6170
Thanks,
Simon

On ms outlook 2011, I get could not change identity error?

On ms outlook 2011, I get could not change identity error?

Or, you can find a local UNsecured hotspot not requiring a login or password. Like a McDonalds.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hi, i have problem when installing itune. it said: Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel. please help me!

hi,
i have problem when installing itune. it said:
Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
Please help me i can't do anything without itune

For "Could not open key/write value" errors when reinstalling try b noir's user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
[LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows.
The technique can be applied to the branch of the registry mentioned in the error message.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Could not load file or assembly 'Microsoft.Xrm.Client' in CRM outlook offline client.

Hi,
In my plugin code i have used 'Microsoft.Xrm.Client' to make use of
CachedOrganizationService class.
but while i am checking in offline client i am getting this error
Could not load file or assembly 'Microsoft.Xrm.Client'.
please suggest and help me solve this issue.
Thanks in advance,
V_R

Unfortunately your post is off topic as it's not specific to Microsoft Training and Certification.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your question
in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to Microsoft Training and Certification and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCPD, MCSD, MCSA, MCITP, MCDBA
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

MS Word 2007 Problem: Could not Change Doc Template

I started getting an error when I open a rules document through OPM. The document usually opens ok, but OPM gives the error "Oracle Policy Modeling was unable to open the document as an error occurred with MicroSoft Word: Could not change document template.
Usually, I can work in the document with no problems, but sometimes when I do the compile of the document that got this message, the compile and save works, but then Word crashes. The compiled document is available through OPM, but it thinks the document needs to be compiled on a build. I've learned to continue without compiling, otherwise Word will crash again.
Other times, the document compiles just fine with no problems with Word.
Occasionally, Word loses the Add-ins list. I've figured out how to attach it again.
Everything was fine until about 2 weeks ago. The only difference I can think of is that Word did an automatic update. I uninstalled and reinstalled OPM, but it hasn't made a difference.
I'm running OPM 10.1.0.27 on XT.
Any ideas? Thanks,
Terry

Hi Terry,
Try the following workaround:
1) Rename the word 2003 template (Policy Modeling Word Template) in c:\program files\oracle modeling\templates to another filename
- This is to force Word 2007 not to load the Word 2003 template
2) Open the Word document from Policy Modeling
- To load the Word 2007 template and attached it to the document
3) Save the document
(Thanks to Red Canda for this.)
Davin Fifield

MSTest Coded UI Test Could not load file or assembly Microsoft.VisualStudio.TestTools.UITesting

Hi,
I have created some Coded UI Tests in a Test Project using Visual Studio Premium 2013 (Version 12.0.30723.00 Update 3).
Those Coded UI tests run just fine when I run them from inside Visual Studio (Go to Test Explorer and hit Run).
However If I try to run them using MSTest.exe or VSTest.Console.exe I am not able to.
When I run the tests using MSTest I get the following error:
Loading CodedUITests.dll...
CodedUITests.dll
Unable to load the test container 'CodedUITests.dll' or one of its dependencies.
Error details: System.IO.FileNotFoundException: Could not load file or assembly
'Microsoft.VisualStudio.TestTools.UITesting, Version=12.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot
find the file specified.
If I run them using VSTest.Console.exe I get the following error:
Starting test execution, please wait...
Warning: Unable to load types from the test source 'C:\PathToTestProject\bin\Debug\CodedUITests.dll'.
Some or all of the tests in this source may not be discovered. If you are running unit tests for Windows Store apps and referencing custom WinMD type then please visit
http://go.microsoft.com/fwlink/?LinkId=238340 for more info. Error details: System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.VisualStudio.TestTools.UITesting, Version=12.0.0.0,
Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified..
Warning: No test is available in CodedUITests.dll. Make sure that installed test
discoverers & executors, platform & framework version settings are appropriate
and try again.
I try to find this issue online and was not able to find anyone with a similar problem.I am not sure if there is something corrupted with my VS
instalation that may be causing this problem.
Could someone help me with this?
Thanks!
Brazeta
PS: This path "C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\PublicAssemblies" exists in the machine where I have VS and where I am executing the MSTest command. This path contains all the Microsoft test assemblies, including "Microsoft.VisualStudio.TestTools.UITesting.dll"

Hi Edward
>> Do you mean that Coded UI tests run fine in VS, but failed with MSTest?
Yes, that is exactly the case!
>>Before you run with MSTest, have you changed the Coded UI project?
No. In Visual Studio I can run the Coded UITests by going to Text Explorer and click the run button. Without changing anything else, if I try to run them in using mstest or vstest.console I am not able to
>>Did you change the project after you run in vs?
No. The project did not change at all
>> Could you share us the MSTest command?
I run the commands in "Developer Command Prompt fro VS2012". the commands are:
MSTEST:
mstest /testcontainer:CodedUITests.dll
Microsoft (R) Test Execution Command Line Tool Version 11.0.50727.1
Copyright (c) Microsoft Corporation. All rights reserved.
Loading CodedUITests.dll...
CodedUITests.dll
Unable to load the test container 'CodedUITests.dll' or one of its dependencies.
Error details: System.IO.FileNotFoundException: Could not load file or assembly
'Microsoft.VisualStudio.TestTools.UITesting, Version=12.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannotfind the file specified.
VSTEST.CONSOLE
vstest.console CodedUITests.dll
Microsoft (R) Test Execution Command Line Tool Version 11.0.60315.1
Copyright (c) Microsoft Corporation. All rights reserved.
Starting test execution, please wait...
Warning: Unable to load types from the test source 'C:\MyProjects\CodedUITests\bin\Debug\CodedUITests.dll'.
Some or all of the tests in this source may not be discovered.
If you are running unit tests for Windows Store apps and referencing custom WinMD type then please visit
http://go.microsoft.com/fwlink/?LinkId=238340 for more info.
Error details: System.IO.FileNotFoundException:
Could not load file or assembly 'Microsoft.VisualStudio.TestTools.UITesting,
Version=12.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies.
The system cannot find the file specified..
Warning: No test is available in CodedUITests.dll. Make sure that installed test
discoverers & executors, platform & framework version settings are appropriate
and try again.
Information: Additionally, you can try specifying '/UseVsixExtensions' command i
f the test discoverer & executor is installed on the machine as vsix extensions
and your installation supports vsix extensions. Example: vstest.console.exe myTe
sts.dll /UseVsixExtensions:true
>>Have you set the platform (x64 or x32) in your test? If so, I think you could refer the link below:
The selected platform is AnyCPU
>>Was your UITesting in another dll? If so, you could refer the link below:
The tests are all in the CodedUITests dll. All tests were created inside a test project (called CodedUITests, they run ok if I execute them in VS but the show the abouve error if I run them using the Developer Command Prompt for VS2012).
I didn´t mention this before but I DO NOT have test controller and test agents installed in my PC! I just have Visual Studio installed (not 100% sure if I need the agent to run the UI Tests in the same PC where I have VS installed).
I hope this information may be usefull,
Best Regards,
José Brazeta
PS:
I just try to create a very simple UI Test in another PC where I have Visual Studio 2013 Ultimate (Versio12.0.30723.00 Update 3).
Using VS I created a new Solution with just 1 project (Coded UI Test Project) and recorded a very simple test (on IE and at the google page search for Coded UI Test and hit the search button).
After compiling the Coded UI Test project in VS I can see the test in Test Explorer and If I run the test it all goes ok.
Using the Developer Command Prompt for VS2012 if I navigate the the "Debug" folder of my project none of the following scripts will work:
mstest /testcontainer:CodedUITestProject1.dll
vstest.console CodedUITestProject1.dll
I get the same error that I show in the bigining of this post.

Error creating site collection - Could not load file or assembly 'Microsoft.ApplicationServer.Caching.Core, Version=1.0.0.0

Hi,
When creating a Site collection using Central admin, i am getting the error "One or more types failed to load. Please refer to the upgrade log for more details." . Microsoft.ApplicationServer.Caching.Core dll version on my machine is 1.0.4632 (App
Fabric 1.1).
Stack Trace
SharePoint Foundation Upgrade SPSiteWssSequence ajywy ERROR Exception: Could not load file or assembly 'Microsoft.ApplicationServer.Caching.Core, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot
find the file specified. dd64ad9c-0f90-e07d-aaaa-13533e0e9e4f
Thanks,
Thomas

Hi Thomas,
According to your description, my understanding is that you got an error when you created a site collection in SharePoint 2013.
I found a similar thread with yours, maybe it also was created by you. Anyway ,in the thread, the workaround is Changing the virtual directory web config of CA (Option 1 and 2 mentioned at
http://technet.microsoft.com/en-us/library/dn473937.aspx ) and it worked.
More information, please take a look at:
http://sharepoint.stackexchange.com/questions/111439/error-creating-site-collection-could-not-load-file-or-assembly-microsoft-appl
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)

Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
===========================================================
This is a SQL Server 2012 Developer Edition of SSRS.
I am getting this error when navigating to http://servername/Reports. The reports site was working fine, until I installed a SQL 2014 Developer instance (including SSRS) on the same server.
I can still get to the http://servername/ReportServer site.
Neither of these are using Sharepoint.
Any help resolving this issue would be greatly appreciated.
Below is the stack trace.
===========================================================
[FileLoadException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Reflection.Assembly._nLoad(AssemblyName
fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity,
StackCrawlMark& stackMark, Boolean forIntrospection) +416 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +166 System.Reflection.Assembly.Load(String
assemblyString) +35 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +190 [ConfigurationErrorsException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel'
or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +1149
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +323 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +116 System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +36 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection
compConfig) +212 System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) +174 System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) +57 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath
virtualPath) +295 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +482 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext
context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +108 System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean
noAssert) +171 System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +52 System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext
context, String requestType, VirtualPath virtualPath, String physicalPath) +53 System.Web.HttpApplication.MapHttpHandler(HttpContext context, String requestType, VirtualPath path, String pathTranslated, Boolean useAppConfig) +519 System.Web.MapHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
+176 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +274
===========================================================

Hi Glen，
"The located assembly's manifest definition does not match the assembly reference." is generally caused by the loaded assembly's version is different than the expected version application refers to.
In this case, it should be caused by:
While starting Report Manager, the backend process ReportingServiceService need to load assemblies it refers to
ReportingServiceService reads the compilation/assemblies element from web.config(under Report Manager virtual patch)
If the compilation/assemblies is not existing, ReportingServiceService loads all assemblies from Bin folder. It can be verified from call stack System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory(). ReportingServiceService
uses System.Reflection.Assembly.Load with the assemblies' name only to load assemblies.
The Assembly.Load tries to load from the specify assembly by name from GAC at first. If it is found from GAC, it won't be loaded from Bin folder any more.
Since Reporting Service SharePoint Integration mode is installed, a same assembly of 'Microsoft.ReportingServices.SharePoint.ObjectModel' with different version might be installed to the GAC. That causes the error "The located assembly's manifest definition
does not match the assembly reference."
For more information about the error message and the loading process, please see:
http://blogs.msdn.com/b/junfeng/archive/2004/03/25/95826.aspx
https://msdn.microsoft.com/en-us/library/yx7xezcf(v=vs.100).aspx
Thanks,
Jinchun Chen

Could not load file or assembly Microsoft.ServiceHosting.Tools

I just got a new workstation set up and I installed VS 2013 with Windows Azure SDK 2.3 first. But then I realized that our project was built upon Windows Azure SDK 2.2. So I uninstalled the SDK 2.3 and then installed 2.2. After that, I got the project from
TFS and tried to run it and there was a problem:
Cannot debug the project because some run time file was missing.
So I tried to repair it by uninstalling Windows Azure SDK 2.2 completely and repair my VisualStudio. But now I get this error message:
Could not load file or assembly 'Microsoft.ServiceHosting.Tools, Version=1.0.0.0, Culture =neutral, PublicKeyToken=232wedsfd3f4' or one of its dependencies. The system cannot find the file specified.
I looked through the project and there wasn't any reference of Miscrosoft.ServiceHosting. And the database and cloud are working. No idea what happened in the machine since Azure is a new field for me. Does anybody ever meet the same problem?

Hi,
From my experience, there may be some component missing on your computer, I suggest you uninstall again (everything with Azure keyword in control panel, not only the SDK-> Add remove programs."), then open Microsoft web platform installer (http://www.microsoft.com/web/downloads/platform.aspx),
select azure sdk 2.3, then install this product. Hope this helps, if not, please feel free to let me know.
Best Regards
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Could not copy the file "C:\Microsoft.WITDataStore.dll" because it was not found.

Hi All,
I need to use "Microsoft.TeamFoundation.WorkItemTracking.Common, Version=11.0.0.0" dll in my code.
But when I try to build my application I get the below error.
"Could not copy the file "C:\Microsoft.WITDataStore.dll" because it was not found."
And when I try to include version 12 of the same dll , code gets build successfully. And when I try to consume the code(which uses the dll) I get
'Could not load file or assembly 'Microsoft.TeamFoundation.WorkItemTracking.Client.DataStoreLoader,
Version=11.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies.
The system cannot find the file specified."
how do I go ahead with this..??
Thanks
Uma.K

Hi Uma,
You might check whether the version 11 of the assembly is referenced or added into soruce control. When use the referenced files, please use the relative path for building. If the version 11 of the assembly is not added, please add it to source control and
make sure it's referenced correctly.
It would be better to let us know the TFS version that you're using. And you can also use version 12 if the assembly works fine. If you have any other concerns, elaborate your scenario with more details.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Could not change the language by menu

Could not change the browser language by menu on Safari 4 final for Windows. You could change it by changing OS settings! It's impossible. It's only browser.
Safari 4 public beta could change it by view menu. What's going on?

Hello Dimitar,
Thanks for the offered solution, it's nice to find at least something, although still not ideal IMHO since to switch to some other language I shall have to do this exchange operation every time, I guess.
It happened that I have to consult newbies in the company I work, and they are located in different countries of the world, speak different languages and use different browsers - as for me, it's a little bit troublesome to change language in this manner to see how this or that item is named in menu...
I'm still waiting for Apple to make this option built-in in Safari menu, as it was before and as it is in all other known to me browsers.
Message was edited by: Sharmeella

Could not load file or assembly 'Microsoft.SqlServer.Replication, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'

I am using .net application built in .net 2.0 using SQL server Express 2005 Replication publication functionality. Application setup is in 32 bit.
Now i am running this .net application setup on Windows-7 [64 bit]. It gets installed successfully with SQL server Express 2005.
But when starting the application getting below error while performing Synchronization of subscription and publication via .net app. I have checked that Microsoft.SqlServer.Replication.dll file is installed in GAC having same version
[Version=9.0.242.0]. It is working fine on 32-bit OS.
Below is error details.
TITLE: SETSynchConsole
Could not load file or assembly 'Microsoft.SqlServer.Replication, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. An attempt was made to load a program with an incorrect format.

Hi deshpasu,
According to your description, you install SQL Server Express 2005, and OS is 64bit. If your assembly is running as a 32 bit process and it is unable to load a 64 bit dll, we get a exception , so we need to verify if you install Microsoft SQL Server
2005 Replication Management Objects. These are not installed by default database engine install.
This is 64bit OS so you should install 64bit "Microsoft SQL Server 2005 Replication Management Objects" from online feature pack of SQL Server 2005.
If SQL Express x86 setup (with Database Engine, Replication selected at setup) installs Microsoft.SqlServer.Replication and so this load error does not occur on 32bit systems.
For more information, see:
http://stackoverflow.com/questions/41449/i-get-a-an-attempt-was-made-to-load-a-program-with-an-incorrect-format-error-o
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Gnome battery icon and 'Could not change DPMS mode'

Hello,
I run my Arch with latest Gnome (3.2.1) and lately, my battery icon disappeared. Then, after some reboot it showed again (without changes to configuration, packages etc), and now its gone again, for good it seems.
My .xsession-errors output is:
/etc/gdm/Xsession: Beginning session setup...
localuser:ironhalik being added to access control list
/etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
GNOME_KEYRING_CONTROL=/tmp/keyring-fufDqS
GNOME_KEYRING_CONTROL=/tmp/keyring-fufDqS
SSH_AUTH_SOCK=/tmp/keyring-fufDqS/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-fufDqS
SSH_AUTH_SOCK=/tmp/keyring-fufDqS/ssh
GPG_AGENT_INFO=/tmp/keyring-fufDqS/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-fufDqS
SSH_AUTH_SOCK=/tmp/keyring-fufDqS/ssh
GPG_AGENT_INFO=/tmp/keyring-fufDqS/gpg:0:1
(gnome-settings-daemon:1442): power-plugin-WARNING **: Unable to start power manager: Could not change DPMS mode
** Message: a new manager occured at org.globalmenu.manager, :1.2
Initializing tracker-miner-fs...
Tracker-Message: Setting up monitor for changes to config file:'/home/ironhalik/.config/tracker/tracker-miner-fs.cfg'
Starting log:
File:'/home/ironhalik/.local/share/tracker/tracker-miner-fs.log'
Initializing tracker-store...
Tracker-Message: Setting up monitor for changes to config file:'/home/ironhalik/.config/tracker/tracker-store.cfg'
Tracker-Message: Setting up monitor for changes to config file:'/home/ironhalik/.config/tracker/tracker-store.cfg'
Starting log:
File:'/home/ironhalik/.local/share/tracker/tracker-store.log'
(tracker-store:1541): Tracker-CRITICAL **: D-Bus service name:'org.freedesktop.Tracker1' is already taken, perhaps the daemon is already running?
** Message: a new manager occured at org.globalmenu.manager, :1.2
e-data-server-ui-Message: Unable to find password(s) in keyring (Keyring reports: No matching results)
** Message: a new manager occured at org.globalmenu.manager, :1.2
** Message: a new manager occured at org.globalmenu.manager, :1.2
Failed to play sound: File or data not found
** Message: applet now removed from the notification area
(gnome-shell:1497): folks-DEBUG: individual-aggregator.vala:310: Setting primary store IDs to defaults.
(gnome-shell:1497): folks-DEBUG: individual-aggregator.vala:338: Primary store IDs are 'eds' and 'system'.
JS LOG: GNOME Shell started at Mon Jan 23 2012 02:16:40 GMT+0100 (CET)
Window manager warning: Log level 32: a new manager occured at org.globalmenu.manager, :1.2
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
** Message: a new manager occured at org.globalmenu.manager, :1.2
** Message: applet now embedded in the notification area
(tracker-miner-fs:1513): Tracker-WARNING **: Couldn't properly parse desktop file 'file:///usr/share/applications/brasero-nautilus.desktop': 'Desktop file doesn't contain type'
** Message: a new manager occured at org.globalmenu.manager, :1.2
(gnome-shell:1497): St-WARNING **: Ignoring length property that isn't a number
(gnome-shell:1497): St-WARNING **: Ignoring length property that isn't a number
** (leafpad:1696): DEBUG: gtk-menubar-gtk2.vala:25: map called
** Message: a new manager occured at org.globalmenu.manager, :1.2
refresh /open=true
refresh /0/open=true
path = /0, item is 0x963ec28
refresh /open=false
refresh /0/open=false
refresh /open=true
refresh /0/open=true
path = /0, item is 0x963ec28
refresh /1/open=true
path = /1, item is 0x963ed60
refresh /3/open=true
path = /3, item is 0x963f100
refresh /open=false
refresh /3/open=false
(gnome-shell:1497): St-CRITICAL **: setup_framebuffers: assertion `width > 0' failed
(gnome-shell:1497): St-WARNING **: Ignoring length property that isn't a number
(gnome-shell:1497): St-WARNING **: Ignoring length property that isn't a number
** (leafpad:1716): DEBUG: gtk-menubar-gtk2.vala:25: map called
** Message: a new manager occured at org.globalmenu.manager, :1.2
refresh /open=true
refresh /0/open=true
path = /0, item is 0x9343c18
refresh /open=false
refresh /0/open=false
Any ideas?
Thanks

Ok, I reinstalled gdm, added my user to the video group and so far it seems to be working properly, so thank you very much.
Now I just need to see if it will stick that way, since it seems to come and go somewhat randomly.
And btw, I use the presentation mode shell extension, but disabling it did not have any effect.
EDIT:
Ok, it seems the source of the problem was this little addon to /etc/gdm/Init/Default, that I used to launch synergy in GDM:
/usr/bin/killall synergyc
while [ $(pgrep -x synergyc) ]; do sleep 0.1; done
/usr/bin/synergyc 192.168.0.2
Since synergy controls the display power state, it would add up.
Last edited by ironhalik (2012-01-23 19:09:43)

I forgot my answers to security questions. I could not change and I am unable to make purchases at the Apple store. What do I do?

I forgot my answers to security questions. I could not change and I am unable to make purchases at the Apple store. What do I do?

Go to http://appleid.apple.com and select "Manage your account". Log in with your Apple ID and password, then select Password and Security from the left column.
You need to know the answers to your existing questions to reset them. If you don't remember your answers, there may be a link on that page where you can have a reset email send to your Rescue email address. This will not appear if you have not provided a Rescue email address, and may not appear even if you did.
If there does not seem to be any way to reset your security questions, contact iTunes Support here: http://www.apple.com/support/itunes/contact/ They will respond within a business day. Be sure to check your spam or junk mail folders for their response.

Could Not Change to that idenity Microsoft Outlook 2011

Similar Messages

Maybe you are looking for