Could not find i386-glibc21-linux.env.sh
I need to install Oracle 816 for RedHat 7.1.
But when I check file under /usr. There is no i386-glibc21-linux
directory. Anyone know why??
Also, how do I install package?? (rpm??) I need to install
compat-egcs, compat-glibc and compat-libs (6.2 compatibility
package)..thanks..
u haven't installed the rpms so
u cant see the i386---.sh file
to install a rpm.
use
rpm -ivh <rpm-file>
or if u have access to X then
either use kpackage or gnomrpm
they are graphical front ends to rpm
Similar Messages
-
Arch 0.8 CD - "Could not find kernel image: linux"
I only get
Unknown keyword in config file.
Unknown keyword in config file.
Could not find kernel image: linux
when I try to boot the arch 0.8 base installer.
I checked md5 of the iso I downloaded and it seems to be correct:
1e0e9f3715d3c51129395570e01b9bc2 Archlinux-i686-0.8-Voodoo.base.iso
What can be done?
Last edited by Galdona (2007-04-13 18:34:53)I wonder if the CD is defective or if it was burnt at a high speed that your CD cannot read.
In other words, may be you are reading from a coaster.
R -
Could not find Wireless network configuration Oracle linux Enterprise
HEllo,
I was able to install oracle linux OS on my laptop and I was able to use internet thru wired network, but I tried to config the wireless network and I could not find any docs or online source to config wireless network on OLE machines.Belwo is the source that i used for installing the linux, he gave only one scrrenshot for network configuration where I see wireless tab also,but nothing is working when i configure wirless
http://www.oracle-base.com/articles/linux/oracle-linux-6-installation.phpiamsid wrote:
HEllo,
I was able to install oracle linux OS on my laptop and I was able to use internet thru wired network, but I tried to config the wireless network and I could not find any docs or online source to config wireless network on OLE machines.Belwo is the source that i used for installing the linux, he gave only one scrrenshot for network configuration where I see wireless tab also,but nothing is working when i configure wirless
http://www.oracle-base.com/articles/linux/oracle-linux-6-installation.php
Wrong forum. Your question has nothing to do with Oracle Database Installation. You might try the [url https://forums.oracle.com/forums/forum.jspa?forumID=822] Oracle Linux forum..
When you post there it will be helpful if you will provide some detail on what you actually did and and the result. So far all you've really said is "Here is a picture of a Ford. Why can't I get my Chevy to run?" -
Could not find symbol 'SQLAllocConnect' for generic connectivity
Hi,
I am using Oracle 10gR2 64-bit on Linux 64-bit. I am trying to connect to an MSSQL box on Windows. I know that hsodbc is officially not supported on 64-bit OS.
My connection using freetds works as well from unixODBC (verified by tsql, isql). The problem is in the next layer up - hsodbc. I copied it from a 32-bit Linux box as it was 0 bytes on 64-bit box.
Here is what I have in initSQLGUY.ora -
HS_FDS_CONNECT_INFO = sqltest
HS_FDS_TRACE_LEVEL = 4
HS_FDS_TRACE_FILE_NAME = freetds.trc
HS_FDS_SHAREABLE_NAME = /usr/local/lib/libodbc.so
# ODBC specific environment variables
set ODBCINI=/usr/local/etc/odbc.ini
set LD_LIBRARY_PATH=/usr/local/lib:/opt/oracle/product/10.2/lib32
where sqltest is the name of my dsn. My listener.ora has -
(SID_DESC =
(SID_NAME = SQLGUY)
(ORACLE_HOME = /opt/oracle/product/10.2)
(PROGRAM = hsodbc)
(ENVS=LD_LIBRARY_PATH=/usr/local/lib:/opt/oracle/product/10.2/lib32)
My tnsnames.ora has -
sqlguyid=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=myhost.mydomain.com)(PORT=1521))
(CONNECT_DATA= (SID=SQLGUY))
(HS=OK)
with this configuration, tnsping works -
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=myhost.mydomain.com)(PORT=1521)) (CONNECT_DATA= (SID=SQLGUY)) (HS=OK))
OK (0 msec)
However my db link fails with -
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC]DRV_InitTdp: DB_ODBC_INTERFACE (718): ; [C077]
Could not find symbol 'SQLAllocConnect' in dynamic library
DB_ODBC_INTERFACE (722): ; [C079] Failed to load dynamic library
'/usr/local/lib/libodbc.so'
ORA-02063: preceding 3 lines from SQLGUYLNK
I am sure that others have gotten this to work in the past. I must be missing something trivial. Can anyone please point out what I need to do to get this working?
ThanksYou didn't explicite mention it, but I assume you are using a 32bit ODBC driver?
The SQLAllocConnect function is built into the ODBC driver manager which is refered in your case as: /usr/local/lib/libodbc.so
- check out this library exists and has sufficient permissins to be loaded by the Oracle user
- check out this library is 32 bit
- check out this library contains the SQLAllocConnect symbol -
Could not find or load main class weblogic.WLST
Hi,
I am trying to run a python script to create JMS components for use with iHub and i got the following error message when i try to run the script:
C:\ihub\bin>java weblogic.WLST omipmihubwlscript.py weblogicjms Welcome1 http://<servername>:7111 OMIPMIHUBServer
Error: Could not find or load main class weblogic.WLST
I have run the setWLSEnv.cmd file and got the following output
C:\oracle\Middleware2\wlserver_10.3\server\bin>setWLSEnv.cmd
CLASSPATH="C:\oracle\MIDDLE~2\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~2\patch_ocp371\profiles\default\sys_manifest_classpath\weblogic_p
atch.jar;C:\PROGRA~1\Java\JDK17~1.0_1\lib\tools.jar;C:\oracle\MIDDLE~2\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\oracle\MIDDLE~2\WLSERV~1.3\server\lib\weblogic.jar;C:\oracle\MIDDLE~2\mod
ules\features\weblogic.server.modules_10.3.6.0.jar;C:\oracle\MIDDLE~2\WLSERV~1.3\server\lib\webservices.jar;C:\oracle\MIDDLE~2\modules\ORGAPA~1.1/lib/ant-all.jar;C:\oracle\MIDDLE~2\modu
les\NETSFA~1.0_1/lib/ant-contrib.jar;C:\oracle\MIDDLE~2\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~2\patch_ocp371\profiles\default\sys_man
ifest_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK17~1.0_1\lib\tools.jar;C:\oracle\MIDDLE~2\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\oracle\MIDDLE~2\WLSERV~1.3\server\lib\weblogic.
jar;C:\oracle\MIDDLE~2\modules\features\weblogic.server.modules_10.3.6.0.jar;C:\oracle\MIDDLE~2\WLSERV~1.3\server\lib\webservices.jar;C:\oracle\MIDDLE~2\modules\ORGAPA~1.1/lib/ant-all.j
ar;C:\oracle\MIDDLE~2\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\oracle\MIDDLE~2\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~2\patch_ocp37
1\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK17~1.0_1\lib\tools.jar;C:\oracle\MIDDLE~2\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\oracle\MIDDLE~2\WLSER
V~1.3\server\lib\weblogic.jar;C:\oracle\MIDDLE~2\modules\features\weblogic.server.modules_10.3.6.0.jar;C:\oracle\MIDDLE~2\WLSERV~1.3\server\lib\webservices.jar;C:\oracle\MIDDLE~2\module
s\ORGAPA~1.1/lib/ant-all.jar;C:\oracle\MIDDLE~2\modules\NETSFA~1.0_1/lib/ant-contrib.jar;"
PATH="C:\oracle\MIDDLE~2\patch_wls1036\profiles\default\native;C:\oracle\MIDDLE~2\patch_ocp371\profiles\default\native;C:\oracle\MIDDLE~2\WLSERV~1.3\server\native\win\x64;C:\oracle\MIDD
LE~2\WLSERV~1.3\server\bin;C:\oracle\MIDDLE~2\modules\ORGAPA~1.1\bin;C:\PROGRA~1\Java\JDK17~1.0_1\jre\bin;C:\PROGRA~1\Java\JDK17~1.0_1\bin;C:\oracle\MIDDLE~2\patch_wls1036\profiles\defa
ult\native;C:\oracle\MIDDLE~2\patch_ocp371\profiles\default\native;C:\oracle\MIDDLE~2\WLSERV~1.3\server\native\win\x64;C:\oracle\MIDDLE~2\WLSERV~1.3\server\bin;C:\oracle\MIDDLE~2\module
s\ORGAPA~1.1\bin;C:\PROGRA~1\Java\JDK17~1.0_1\jre\bin;C:\PROGRA~1\Java\JDK17~1.0_1\bin;C:\oracle\MIDDLE~2\patch_wls1036\profiles\default\native;C:\oracle\MIDDLE~2\patch_ocp371\profiles\
default\native;C:\oracle\MIDDLE~2\WLSERV~1.3\server\native\win\x64;C:\oracle\MIDDLE~2\WLSERV~1.3\server\bin;C:\oracle\MIDDLE~2\modules\ORGAPA~1.1\bin;C:\PROGRA~1\Java\JDK17~1.0_1\jre\bi
n;C:\PROGRA~1\Java\JDK17~1.0_1\bin;C:\app\paul.currie\product\11.2.0\client_2\bin;C:\app\paul.currie\product\11.2.0\dbhome_3\bin;C:\Program Files (x86)\PC Connectivity Solution\;C:\Wind
ows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Java\jdk1.7.0_13\jre\bin;;C:\oracle\MIDDLE~2\WLSERV~1.3\server\native\win\x
64\oci920_8;C:\oracle\MIDDLE~2\WLSERV~1.3\server\native\win\x64\oci920_8;C:\oracle\MIDDLE~2\WLSERV~1.3\server\native\win\x64\oci920_8"
Your environment has been set.
I am totally stuck at this point so any help would be much appreciated.
Cheers
PaulI have just tested both on a Windows and a Linux server and it works fine.
D:\oracle\product\Middleware\wlserver_10.3\server\bin>setWLSEnv.cmd
CLASSPATH=D:\oracle\product\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\oracle\
product\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\oracle\product\JAVA_C~1\li
b\tools.jar;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\oracle\product\MIDDLE~1\WLSERV~1.3\serve
r\lib\weblogic.jar;D:\oracle\product\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;D:\oracle\product\MI
DDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\oracle\product\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;D:\oracle\pro
duct\MIDDLE~1\modules\NETSFA~2.0_1/lib/ant-contrib.jar;D:\oracle\product\MIDDLE~1\patch_wls1035\profiles\default\sys_man
ifest_classpath\weblogic_patch.jar;D:\oracle\product\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\web
logic_patch.jar;D:\oracle\product\JAVA_C~1\lib\tools.jar;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.ja
r;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\oracle\product\MIDDLE~1\modules\features\weblogic.ser
ver.modules_10.3.5.0.jar;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\oracle\product\MIDDLE~1\mod
ules\ORGAPA~1.1/lib/ant-all.jar;D:\oracle\product\MIDDLE~1\modules\NETSFA~2.0_1/lib/ant-contrib.jar;
PATH=D:\oracle\product\MIDDLE~1\patch_wls1035\profiles\default\native;D:\oracle\product\MIDDLE~1\patch_jdev1111\profiles
\default\native;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server\native\win\x64;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server
\bin;D:\oracle\product\MIDDLE~1\modules\ORGAPA~1.1\bin;D:\oracle\product\JAVA_C~1\jre\bin;D:\oracle\product\JAVA_C~1\bin
;D:\oracle\product\MIDDLE~1\patch_wls1035\profiles\default\native;D:\oracle\product\MIDDLE~1\patch_jdev1111\profiles\def
ault\native;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server\native\win\x64;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server\bin
;D:\oracle\product\MIDDLE~1\modules\ORGAPA~1.1\bin;D:\oracle\product\JAVA_C~1\jre\bin;D:\oracle\product\JAVA_C~1\bin;C:\
Program Files\Legato\nsr\bin;C:\PROGRA~2\CA\SHARED~1\ETPKI\lib;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C
:\Windows\System32\WindowsPowerShell\v1.0\;D:\oracle\Java\current\jre\bin;C:\PROGRA~2\CA\IDENTI~1\PROVIS~1\BIN;C:\Progra
m Files (x86)\CA\SharedComponents\CAM\bin;D:\oracle\product\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8;D:\oracle
\product\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8
Your environment has been set.
D:\oracle\product\Middleware\wlserver_10.3\server\bin>java weblogic.WLST
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> -
Hi guys,
as I am still new to RMAN I would be greatfull to You for some help and guidance here.
I am cloning database with RMAN duplicate database command and at the and of the script I got RMAN-06055: could not find log sequence 86362 thread 1 .
The script is :
RMAN> RUN {
2> allocate channel t1 type 'SBT_TAPE';
3> ALLOCATE AUXILIARY CHANNEL aux1 type 'SBT_TAPE';
4> ALLOCATE AUXILIARY CHANNEL aux2 type 'SBT_TAPE';
5> send 'NSR_ENV=(NSR_SERVER=servername,NSR_CLIENT=clientname)';
6> SET UNTIL TIME "to_date( '25.03.2008 08:00:00','dd.mm.yyyy hh24:mi:ss')";
7> DUPLICATE TARGET DATABASE TO GMIGR3
8> DB_FILE_NAME_CONVERT =('/lun0/prod/','/u01/lun0/gmigr3/'
9> '/lun1/prod/','/u01/lun0/gmigr3/'
10> '/lun2/prod/','/u01/lun0/gmigr3/'
11> '/lun3/prod/','/u01/lun0/gmigr3/'
12> '/lun4/prod/','/u01/lun0/gmigr3/'
13> )
14> PFILE = '?/dbs/initGMIGR3.ora'
15> LOGFILE
16> GROUP 1 ('/u01/lun0/gmigr3/log1a.dbf', '/u01/lun0/gmigr3/log1b.dbf') SIZE 100M,
17> GROUP 2 ('/u01/lun0/gmigr3/log2a.dbf', '/u01/lun0/gmigr3/log2b.dbf') SIZE 100M,
18> GROUP 3 ('/u01/lun0/gmigr3/log3a.dbf', '/u01/lun0/gmigr3/log3b.dbf') SIZE 100M,
19> GROUP 4 ('/u01/lun0/gmigr3/log4a.dbf', '/u01/lun0/gmigr3/log4b.dbf') SIZE 100M,
20> GROUP 5 ('/u01/lun0/gmigr3/log5a.dbf', '/u01/lun0/gmigr3/log5b.dbf') SIZE 100M REUSE
21> ;
22> release channel aux1;
23> release channel aux2;
24> release channel t1;and here is the log,
so what would be your advice on this :
allocated channel: t1
channel t1: sid=1339 devtype=SBT_TAPE
channel t1: NMO v4.5.0.0
allocated channel: aux1
channel aux1: sid=870 devtype=SBT_TAPE
channel aux1: NMO v4.5.0.0
allocated channel: aux2
channel aux2: sid=872 devtype=SBT_TAPE
channel aux2: NMO v4.5.0.0
sent command to channel: t1
sent command to channel: aux1
sent command to channel: aux2
executing command: SET until clause
Starting Duplicate Db at 25-MAR-08
contents of Memory Script:
set until scn 8177337546005;
set newname for datafile 1 to
"/u01/lun0/hanfa2/system01.dbf";
set newname for datafile 2 to
"/u01/lun0/hanfa2/system02.dbf";
set newname for datafile 3 to
"/u01/lun0/hanfa2/system03.dbf";
set newname for datafile 4 to
"/u01/lun0/hanfa2/system04.dbf";
set newname for datafile 5 to
"/u01/lun0/hanfa2/system05.dbf";
set newname for datafile 6 to
"/u01/lun0/hanfa2/ctxd01.dbf";
set newname for datafile 7 to
"/u01/lun0/hanfa2/owad01.dbf";
set newname for datafile 8 to
"/u01/lun0/hanfa2/a_queue02.dbf";
set newname for datafile 9 to
"/u01/lun0/hanfa2/odm.dbf";
set newname for datafile 10 to
"/u01/lun0/hanfa2/olap.dbf";
set newname for datafile 11 to
"/u01/lun0/hanfa2/xxcounter03.dbf";
set newname for datafile 12 to
"/u01/lun0/hanfa2/xxcounter02.dbf";
set newname for datafile 13 to
"/u01/lun0/hanfa2/xxcounter01.dbf";
set newname for datafile 14 to
"/u01/lun0/hanfa2/sysaux01.dbf";
set newname for datafile 15 to
"/u01/lun0/hanfa2/system12.dbf";
set newname for datafile 16 to
"/u01/lun0/hanfa2/undo06.dbf";
set newname for datafile 17 to
"/u01/lun0/hanfa2/disco01.dbf";
set newname for datafile 18 to
"/u01/lun0/hanfa2/disco02.dbf";
set newname for datafile 19 to
"/u01/lun0/hanfa2/disco03.dbf";
set newname for datafile 20 to
"/u01/lun0/hanfa2/a_conv01.dbf";
set newname for datafile 21 to
"/u01/lun0/hanfa2/a_conv02.dbf";
set newname for datafile 22 to
"/u01/lun0/hanfa2/a_conv03.dbf";
set newname for datafile 23 to
"/u01/lun0/hanfa2/a_conv04.dbf";
set newname for datafile 24 to
"/u01/lun0/hanfa2/a_int02.dbf";
set newname for datafile 25 to
"/u01/lun0/hanfa2/tools.dbf";
set newname for datafile 26 to
"/u01/lun0/hanfa2/a_txn_data04.dbf";
set newname for datafile 27 to
"/u01/lun0/hanfa2/a_txn_ind06.dbf";
set newname for datafile 28 to
"/u01/lun0/hanfa2/undo05.dbf";
set newname for datafile 29 to
"/u01/lun0/hanfa2/undo04.dbf";
set newname for datafile 30 to
"/u01/lun0/hanfa2/undo03.dbf";
set newname for datafile 31 to
"/u01/lun0/hanfa2/undo02.dbf";
set newname for datafile 32 to
"/u01/lun0/hanfa2/undo01.dbf";
set newname for datafile 33 to
"/u01/lun0/hanfa2/a_ts_mview03.dbf";
set newname for datafile 34 to
"/u01/lun0/hanfa2/a_ts_mview02.dbf";
set newname for datafile 35 to
"/u01/lun0/hanfa2/a_ts_mview01.dbf";
set newname for datafile 36 to
"/u01/lun0/hanfa2/foglight_ts.dbf";
set newname for datafile 37 to
"/u01/lun0/hanfa2/a_txn_data05.dbf";
set newname for datafile 38 to
"/u01/lun0/hanfa2/a_txn_data06.dbf";
set newname for datafile 39 to
"/u01/lun0/hanfa2/a_txn_data07.dbf";
set newname for datafile 40 to
"/u01/lun0/hanfa2/a_txn_ind07.dbf";
set newname for datafile 41 to
"/u01/lun0/hanfa2/a_txn_ind08.dbf";
set newname for datafile 42 to
"/u01/lun0/hanfa2/dwh01.dbf";
set newname for datafile 43 to
"/u01/lun0/hanfa2/dwh02.dbf";
set newname for datafile 288 to
"/u01/lun0/hanfa2/system10.dbf";
set newname for datafile 295 to
"/u01/lun0/hanfa2/system06.dbf";
set newname for datafile 314 to
"/u01/lun0/hanfa2/portal01.dbf";
set newname for datafile 351 to
"/u01/lun0/hanfa2/system07.dbf";
set newname for datafile 352 to
"/u01/lun0/hanfa2/system09.dbf";
set newname for datafile 353 to
"/u01/lun0/hanfa2/system08.dbf";
set newname for datafile 354 to
"/u01/lun0/hanfa2/system11.dbf";
set newname for datafile 392 to
"/u01/lun0/hanfa2/a_txn_data01.dbf";
set newname for datafile 393 to
"/u01/lun0/hanfa2/a_txn_ind01.dbf";
set newname for datafile 394 to
"/u01/lun0/hanfa2/a_ref01.dbf";
set newname for datafile 395 to
"/u01/lun0/hanfa2/a_int01.dbf";
set newname for datafile 396 to
"/u01/lun0/hanfa2/a_summ01.dbf";
set newname for datafile 397 to
"/u01/lun0/hanfa2/a_nolog01.dbf";
set newname for datafile 398 to
"/u01/lun0/hanfa2/a_archive01.dbf";
set newname for datafile 399 to
"/u01/lun0/hanfa2/a_queue01.dbf";
set newname for datafile 400 to
"/u01/lun0/hanfa2/a_media01.dbf";
set newname for datafile 401 to
"/u01/lun0/hanfa2/a_txn_data02.dbf";
set newname for datafile 402 to
"/u01/lun0/hanfa2/a_txn_data03.dbf";
set newname for datafile 403 to
"/u01/lun0/hanfa2/a_txn_ind02.dbf";
set newname for datafile 404 to
"/u01/lun0/hanfa2/a_txn_ind03.dbf";
set newname for datafile 405 to
"/u01/lun0/hanfa2/a_txn_ind04.dbf";
set newname for datafile 406 to
"/u01/lun0/hanfa2/a_txn_ind05.dbf";
set newname for datafile 407 to
"/u01/lun0/hanfa2/a_ref02.dbf";
restore
check readonly
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 25-MAR-08
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00024 to /u01/lun0/hanfa2/a_int02.dbf
restoring datafile 00402 to /u01/lun0/hanfa2/a_txn_data03.dbf
channel aux2: reading from backup piece /full_PROD_s7jc4d6g_1_1/
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00395 to /u01/lun0/hanfa2/a_int01.dbf
restoring datafile 00404 to /u01/lun0/hanfa2/a_txn_ind03.dbf
channel aux1: reading from backup piece /full_PROD_s8jc4d6g_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_s8jc4d6g_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:48:09
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00026 to /u01/lun0/hanfa2/a_txn_data04.dbf
restoring datafile 00030 to /u01/lun0/hanfa2/undo03.dbf
channel aux1: reading from backup piece /full_PROD_s9jc4ene_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_s7jc4d6g_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:59:15
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00027 to /u01/lun0/hanfa2/a_txn_ind06.dbf
restoring datafile 00401 to /u01/lun0/hanfa2/a_txn_data02.dbf
channel aux2: reading from backup piece /full_PROD_sajc4evd_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_s9jc4ene_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:25:44
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00031 to /u01/lun0/hanfa2/undo02.dbf
restoring datafile 00397 to /u01/lun0/hanfa2/a_nolog01.dbf
channel aux1: reading from backup piece /full_PROD_sbjc4fbo_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_sajc4evd_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:26:55
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00039 to /u01/lun0/hanfa2/a_txn_data07.dbf
restoring datafile 00403 to /u01/lun0/hanfa2/a_txn_ind02.dbf
channel aux2: reading from backup piece /full_PROD_scjc4fkl_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_sbjc4fbo_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:26:14
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00025 to /u01/lun0/hanfa2/tools.dbf
restoring datafile 00037 to /u01/lun0/hanfa2/a_txn_data05.dbf
channel aux1: reading from backup piece /full_PROD_sdjc4g03_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_scjc4fkl_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:21:14
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00028 to /u01/lun0/hanfa2/undo05.dbf
restoring datafile 00393 to /u01/lun0/hanfa2/a_txn_ind01.dbf
channel aux2: reading from backup piece /full_PROD_sejc4g5i_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_sdjc4g03_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:22:02
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00032 to /u01/lun0/hanfa2/undo01.dbf
restoring datafile 00038 to /u01/lun0/hanfa2/a_txn_data06.dbf
channel aux1: reading from backup piece /full_PROD_sfjc4gf3_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_sejc4g5i_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:23:13
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00352 to /u01/lun0/hanfa2/system09.dbf
restoring datafile 00392 to /u01/lun0/hanfa2/a_txn_data01.dbf
channel aux2: reading from backup piece /full_PROD_sgjc4gkj_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_sfjc4gf3_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:21:12
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00400 to /u01/lun0/hanfa2/a_media01.dbf
restoring datafile 00405 to /u01/lun0/hanfa2/a_txn_ind04.dbf
channel aux1: reading from backup piece /full_PROD_shjc4gtq_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_sgjc4gkj_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:16:32
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00033 to /u01/lun0/hanfa2/a_ts_mview03.dbf
restoring datafile 00406 to /u01/lun0/hanfa2/a_txn_ind05.dbf
channel aux2: reading from backup piece /full_PROD_sijc4h14_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_shjc4gtq_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:15:51
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00022 to /u01/lun0/hanfa2/a_conv03.dbf
restoring datafile 00029 to /u01/lun0/hanfa2/undo04.dbf
channel aux1: reading from backup piece /full_PROD_skjc4hcm_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_sijc4h14_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:13:42
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00035 to /u01/lun0/hanfa2/a_ts_mview01.dbf
restoring datafile 00041 to /u01/lun0/hanfa2/a_txn_ind08.dbf
channel aux2: reading from backup piece /full_PROD_sjjc4h9n_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_skjc4hcm_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:12:13
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00040 to /u01/lun0/hanfa2/a_txn_ind07.dbf
restoring datafile 00353 to /u01/lun0/hanfa2/system08.dbf
channel aux1: reading from backup piece /full_PROD_sljc4hjo_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_sjjc4h9n_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:12:53
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /u01/lun0/hanfa2/system01.dbf
restoring datafile 00034 to /u01/lun0/hanfa2/a_ts_mview02.dbf
channel aux2: reading from backup piece /full_PROD_smjc4hkr_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_sljc4hjo_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:10:21
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00396 to /u01/lun0/hanfa2/a_summ01.dbf
restoring datafile 00399 to /u01/lun0/hanfa2/a_queue01.dbf
channel aux1: reading from backup piece /full_PROD_sojc4hrb_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_smjc4hkr_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:08:08
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00016 to /u01/lun0/hanfa2/undo06.dbf
restoring datafile 00023 to /u01/lun0/hanfa2/a_conv04.dbf
channel aux2: reading from backup piece /full_PROD_snjc4hr8_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_sojc4hrb_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:06:39
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00014 to /u01/lun0/hanfa2/sysaux01.dbf
restoring datafile 00015 to /u01/lun0/hanfa2/system12.dbf
channel aux1: reading from backup piece /full_PROD_sqjc4i1a_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_snjc4hr8_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:07:21
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00008 to /u01/lun0/hanfa2/a_queue02.dbf
restoring datafile 00394 to /u01/lun0/hanfa2/a_ref01.dbf
channel aux2: reading from backup piece /full_PROD_srjc4i49_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_sqjc4i1a_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:02:30
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00398 to /u01/lun0/hanfa2/a_archive01.dbf
restoring datafile 00407 to /u01/lun0/hanfa2/a_ref02.dbf
channel aux1: reading from backup piece /full_PROD_ssjc4i7s_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_srjc4i49_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:04:01
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00295 to /u01/lun0/hanfa2/system06.dbf
restoring datafile 00351 to /u01/lun0/hanfa2/system07.dbf
channel aux2: reading from backup piece /full_PROD_stjc4ia7_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_ssjc4i7s_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:03:51
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00042 to /u01/lun0/hanfa2/dwh01.dbf
channel aux1: reading from backup piece /full_PROD_spjc4huk_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_stjc4ia7_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:11:11
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00002 to /u01/lun0/hanfa2/system02.dbf
restoring datafile 00003 to /u01/lun0/hanfa2/system03.dbf
channel aux2: reading from backup piece /full_PROD_sujc4ics_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_spjc4huk_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:13:32
channel aux2: restored backup piece 1
piece handle=/full_PROD_sujc4ics_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:03:56
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00288 to /u01/lun0/hanfa2/system10.dbf
restoring datafile 00354 to /u01/lun0/hanfa2/system11.dbf
channel aux1: reading from backup piece /full_PROD_t0jc4if5_1_1/
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00004 to /u01/lun0/hanfa2/system04.dbf
restoring datafile 00005 to /u01/lun0/hanfa2/system05.dbf
channel aux2: reading from backup piece /full_PROD_svjc4ieu_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_t0jc4if5_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:04:46
channel aux2: restored backup piece 1
piece handle=/full_PROD_svjc4ieu_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:04:46
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00020 to /u01/lun0/hanfa2/a_conv01.dbf
restoring datafile 00021 to /u01/lun0/hanfa2/a_conv02.dbf
channel aux1: reading from backup piece /full_PROD_t1jc4ihg_1_1/
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00006 to /u01/lun0/hanfa2/ctxd01.dbf
restoring datafile 00036 to /u01/lun0/hanfa2/foglight_ts.dbf
channel aux2: reading from backup piece /full_PROD_t3jc4iiu_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_t1jc4ihg_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:01:45
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00013 to /u01/lun0/hanfa2/xxcounter01.dbf
restoring datafile 00018 to /u01/lun0/hanfa2/disco02.dbf
channel aux1: reading from backup piece /full_PROD_t4jc4ijd_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_t3jc4iiu_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:01:46
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00043 to /u01/lun0/hanfa2/dwh02.dbf
channel aux2: reading from backup piece /full_PROD_t2jc4ihh_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_t4jc4ijd_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:00:36
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00009 to /u01/lun0/hanfa2/odm.dbf
restoring datafile 00314 to /u01/lun0/hanfa2/portal01.dbf
channel aux1: reading from backup piece /full_PROD_t6jc4ijs_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_t6jc4ijs_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:01:16
channel aux2: restored backup piece 1
piece handle=/full_PROD_t2jc4ihh_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:01:51
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00017 to /u01/lun0/hanfa2/disco01.dbf
restoring datafile 00019 to /u01/lun0/hanfa2/disco03.dbf
channel aux1: reading from backup piece /full_PROD_t5jc4ijs_1_1/
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00011 to /u01/lun0/hanfa2/xxcounter03.dbf
restoring datafile 00012 to /u01/lun0/hanfa2/xxcounter02.dbf
channel aux2: reading from backup piece /full_PROD_t7jc4ik0_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_t5jc4ijs_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:00:55
channel aux2: restored backup piece 1
piece handle=/full_PROD_t7jc4ik0_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:00:55
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00007 to /u01/lun0/hanfa2/owad01.dbf
restoring datafile 00010 to /u01/lun0/hanfa2/olap.dbf
channel aux1: reading from backup piece /full_PROD_t8jc4ik0_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_t8jc4ik0_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:00:45
Finished restore at 25-MAR-08
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "HANFA2" RESETLOGS ARCHIVELOG
MAXLOGFILES 32
MAXLOGMEMBERS 5
MAXDATAFILES 512
MAXINSTANCES 8
MAXLOGHISTORY 7303
LOGFILE
GROUP 1 ( '/u01/lun0/hanfa2/log1a.dbf', '/u01/lun0/hanfa2/log1b.dbf' ) SIZE 100 M ,
GROUP 2 ( '/u01/lun0/hanfa2/log2a.dbf', '/u01/lun0/hanfa2/log2b.dbf' ) SIZE 100 M ,
GROUP 3 ( '/u01/lun0/hanfa2/log3a.dbf', '/u01/lun0/hanfa2/log3b.dbf' ) SIZE 100 M ,
GROUP 4 ( '/u01/lun0/hanfa2/log4a.dbf', '/u01/lun0/hanfa2/log4b.dbf' ) SIZE 100 M ,
GROUP 5 ( '/u01/lun0/hanfa2/log5a.dbf', '/u01/lun0/hanfa2/log5b.dbf' ) SIZE 100 M REUSE
DATAFILE
'/u01/lun0/hanfa2/system01.dbf'
CHARACTER SET UTF8
contents of Memory Script:
switch clone datafile all;
executing Memory Script
datafile 2 switched to datafile copy
input datafile copy recid=1 stamp=650311810 filename=/u01/lun0/hanfa2/system02.dbf
datafile 3 switched to datafile copy
input datafile copy recid=2 stamp=650311810 filename=/u01/lun0/hanfa2/system03.dbf
datafile 4 switched to datafile copy
input datafile copy recid=3 stamp=650311810 filename=/u01/lun0/hanfa2/system04.dbf
datafile 5 switched to datafile copy
input datafile copy recid=4 stamp=650311810 filename=/u01/lun0/hanfa2/system05.dbf
datafile 6 switched to datafile copy
input datafile copy recid=5 stamp=650311810 filename=/u01/lun0/hanfa2/ctxd01.dbf
datafile 7 switched to datafile copy
input datafile copy recid=6 stamp=650311810 filename=/u01/lun0/hanfa2/owad01.dbf
datafile 8 switched to datafile copy
input datafile copy recid=7 stamp=650311810 filename=/u01/lun0/hanfa2/a_queue02.dbf
datafile 9 switched to datafile copy
input datafile copy recid=8 stamp=650311810 filename=/u01/lun0/hanfa2/odm.dbf
datafile 10 switched to datafile copy
input datafile copy recid=9 stamp=650311810 filename=/u01/lun0/hanfa2/olap.dbf
datafile 11 switched to datafile copy
input datafile copy recid=10 stamp=650311810 filename=/u01/lun0/hanfa2/xxcounter03.dbf
datafile 12 switched to datafile copy
input datafile copy recid=11 stamp=650311810 filename=/u01/lun0/hanfa2/xxcounter02.dbf
datafile 13 switched to datafile copy
input datafile copy recid=12 stamp=650311810 filename=/u01/lun0/hanfa2/xxcounter01.dbf
datafile 14 switched to datafile copy
input datafile copy recid=13 stamp=650311810 filename=/u01/lun0/hanfa2/sysaux01.dbf
datafile 15 switched to datafile copy
input datafile copy recid=14 stamp=650311810 filename=/u01/lun0/hanfa2/system12.dbf
datafile 16 switched to datafile copy
input datafile copy recid=15 stamp=650311810 filename=/u01/lun0/hanfa2/undo06.dbf
datafile 17 switched to datafile copy
input datafile copy recid=16 stamp=650311810 filename=/u01/lun0/hanfa2/disco01.dbf
datafile 18 switched to datafile copy
input datafile copy recid=17 stamp=650311810 filename=/u01/lun0/hanfa2/disco02.dbf
datafile 19 switched to datafile copy
input datafile copy recid=18 stamp=650311810 filename=/u01/lun0/hanfa2/disco03.dbf
datafile 20 switched to datafile copy
input datafile copy recid=19 stamp=650311810 filename=/u01/lun0/hanfa2/a_conv01.dbf
datafile 21 switched to datafile copy
input datafile copy recid=20 stamp=650311810 filename=/u01/lun0/hanfa2/a_conv02.dbf
datafile 22 switched to datafile copy
input datafile copy recid=21 stamp=650311810 filename=/u01/lun0/hanfa2/a_conv03.dbf
datafile 23 switched to datafile copy
input datafile copy recid=22 stamp=650311810 filename=/u01/lun0/hanfa2/a_conv04.dbf
datafile 24 switched to datafile copy
input datafile copy recid=23 stamp=650311810 filename=/u01/lun0/hanfa2/a_int02.dbf
datafile 25 switched to datafile copy
input datafile copy recid=24 stamp=650311810 filename=/u01/lun0/hanfa2/tools.dbf
datafile 26 switched to datafile copy
input datafile copy recid=25 stamp=650311810 filename=/u01/lun0/hanfa2/a_txn_data04.dbf
datafile 27 switched to datafile copy
input datafile copy recid=26 stamp=650311810 filename=/u01/lun0/hanfa2/a_txn_ind06.dbf
datafile 28 switched to datafile copy
input datafile copy recid=27 stamp=650311810 filename=/u01/lun0/hanfa2/undo05.dbf
datafile 29 switched to datafile copy
input datafile copy recid=28 stamp=650311810 filename=/u01/lun0/hanfa2/undo04.dbf
datafile 30 switched to datafile copy
input datafile copy recid=29 stamp=650311810 filename=/u01/lun0/hanfa2/undo03.dbf
datafile 31 switched to datafile copy
input datafile copy recid=30 stamp=650311810 filename=/u01/lun0/hanfa2/undo02.dbf
datafile 32 switched to datafile copy
input datafile copy recid=31 stamp=650311810 filename=/u01/lun0/hanfa2/undo01.dbf
datafile 33 switched to datafile copy
input datafile copy recid=32 stamp=650311810 filename=/u01/lun0/hanfa2/a_ts_mview03.dbf
datafile 34 switched to datafile copy
input datafile copy recid=33 stamp=650311810 filename=/u01/lun0/hanfa2/a_ts_mview02.dbf
datafile 35 switched to datafile copy
input datafile copy recid=34 stamp=650311810 filename=/u01/lun0/hanfa2/a_ts_mview01.dbf
datafile 36 switched to datafile copy
input datafile copy recid=35 stamp=650311810 filename=/u01/lun0/hanfa2/foglight_ts.dbf
datafile 37 switched to datafile copy
input datafile copy recid=36 stamp=650311810 filename=/u01/lun0/hanfa2/a_txn_data05.dbf
datafile 38 switched to datafile copy
input datafile copy recid=37 stamp=650311810 filename=/u01/lun0/hanfa2/a_txn_data06.dbf
datafile 39 switched to datafile copy
input datafile copy recid=38 stamp=650311810 filename=/u01/lun0/hanfa2/a_txn_data07.dbf
datafile 40 switched to datafile copy
input datafile copy recid=39 stamp=650311810 filename=/u01/lun0/hanfa2/a_txn_ind07.dbf
datafile 41 switched to datafile copy
input datafile copy recid=40 stamp=650311810 filename=/u01/lun0/hanfa2/a_txn_ind08.dbf
datafile 42 switched to datafile copy
input datafile copy recid=41 stamp=650311810 filename=/u01/lun0/hanfa2/dwh01.dbf
datafile 43 switched to datafile copy
input datafile copy recid=42 stamp=650311810 filename=/u01/lun0/hanfa2/dwh02.dbf
datafile 288 switched to datafile copy
input datafile copy recid=43 stamp=650311810 filename=/u01/lun0/hanfa2/system10.dbf
datafile 295 switched to datafile copy
input datafile copy recid=44 stamp=650311810 filename=/u01/lun0/hanfa2/system06.dbf
datafile 314 switched to datafile copy
input datafile copy recid=45 stamp=650311810 filename=/u01/lun0/hanfa2/portal01.dbf
datafile 351 switched to datafile copy
input datafile copy recid=46 stamp=650311810 filename=/u01/lun0/hanfa2/system07.dbf
datafile 352 switched to datafile copy
input datafile copy recid=47 stamp=650311811 filename=/u01/lun0/hanfa2/system09.dbf
datafile 353 switched to datafile copy
input datafile copy recid=48 stamp=650311811 filename=/u01/lun0/hanfa2/system08.dbf
datafile 354 switched to datafile copy
input datafile copy recid=49 stamp=650311811 filename=/u01/lun0/hanfa2/system11.dbf
datafile 392 switched to datafile copy
input datafile copy recid=50 stamp=650311811 filename=/u01/lun0/hanfa2/a_txn_data01.dbf
datafile 393 switched to datafile copy
input datafile copy recid=51 stamp=650311811 filename=/u01/lun0/hanfa2/a_txn_ind01.dbf
datafile 394 switched to datafile copy
input datafile copy recid=52 stamp=650311811 filename=/u01/lun0/hanfa2/a_ref01.dbf
datafile 395 switched to datafile copy
input datafile copy recid=53 stamp=650311811 filename=/u01/lun0/hanfa2/a_int01.dbf
datafile 396 switched to datafile copy
input datafile copy recid=54 stamp=650311811 filename=/u01/lun0/hanfa2/a_summ01.dbf
datafile 397 switched to datafile copy
input datafile copy recid=55 stamp=650311811 filename=/u01/lun0/hanfa2/a_nolog01.dbf
datafile 398 switched to datafile copy
input datafile copy recid=56 stamp=650311811 filename=/u01/lun0/hanfa2/a_archive01.dbf
datafile 399 switched to datafile copy
input datafile copy recid=57 stamp=650311811 filename=/u01/lun0/hanfa2/a_queue01.dbf
datafile 400 switched to datafile copy
input datafile copy recid=58 stamp=650311811 filename=/u01/lun0/hanfa2/a_media01.dbf
datafile 401 switched to datafile copy
input datafile copy recid=59 stamp=650311811 filename=/u01/lun0/hanfa2/a_txn_data02.dbf
datafile 402 switched to datafile copy
input datafile copy recid=60 stamp=650311811 filename=/u01/lun0/hanfa2/a_txn_data03.dbf
datafile 403 switched to datafile copy
input datafile copy recid=61 stamp=650311811 filename=/u01/lun0/hanfa2/a_txn_ind02.dbf
datafile 404 switched to datafile copy
input datafile copy recid=62 stamp=650311811 filename=/u01/lun0/hanfa2/a_txn_ind03.dbf
datafile 405 switched to datafile copy
input datafile copy recid=63 stamp=650311811 filename=/u01/lun0/hanfa2/a_txn_ind04.dbf
datafile 406 switched to datafile copy
input datafile copy recid=64 stamp=650311811 filename=/u01/lun0/hanfa2/a_txn_ind05.dbf
datafile 407 switched to datafile copy
input datafile copy recid=65 stamp=650311811 filename=/u01/lun0/hanfa2/a_ref02.dbf
contents of Memory Script:
set until time "to_date( '25.03.2008 08:00:00','dd.mm.yyyy hh24:mi:ss')";
recover
clone database
delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 25-MAR-08
starting media recovery
channel aux1: starting archive log restore to default destination
channel aux1: restoring archive log
archive log thread=1 sequence=86375
channel aux1: restoring archive log
archive log thread=1 sequence=86376
channel aux1: restoring archive log
archive log thread=1 sequence=86377
channel aux1: restoring archive log
archive log thread=1 sequence=86378
channel aux1: restoring archive log
archive log thread=1 sequence=86379
channel aux1: restoring archive log
archive log thread=1 sequence=86380
channel aux1: restoring archive log
archive log thread=1 sequence=86381
channel aux1: restoring archive log
archive log thread=1 sequence=86382
channel aux1: restoring archive log
archive log thread=1 sequence=86383
channel aux1: restoring archive log
archive log thread=1 sequence=86384
channel aux1: restoring archive log
archive log thread=1 sequence=86385
channel aux1: restoring archive log
archive log thread=1 sequence=86386
channel aux1: restoring archive log
archive log thread=1 sequence=86387
channel aux1: restoring archive log
archive log thread=1 sequence=86388
channel aux1: restoring archive log
archive log thread=1 sequence=86389
channel aux1: restoring archive log
archive log thread=1 sequence=86390
channel aux1: restoring archive log
archive log thread=1 sequence=86391
channel aux1: restoring archive log
archive log thread=1 sequence=86392
channel aux1: restoring archive log
archive log thread=1 sequence=86393
channel aux1: restoring archive log
archive log thread=1 sequence=86394
channel aux1: restoring archive log
archive log thread=1 sequence=86395
channel aux1: restoring archive log
archive log thread=1 sequence=86396
channel aux1: restoring archive log
archive log thread=1 sequence=86397
channel aux1: restoring archive log
archive log thread=1 sequence=86398
channel aux1: reading from backup piece /arch1_PROD_tdjc4jd7/
channel aux1: restored backup piece 1
piece handle=/arch1_PROD_tdjc4jd7/ tag=TAG20080325T060110
channel aux1: restore complete, elapsed time: 00:07:36
channel aux1: starting archive log restore to default destination
channel aux1: restoring archive log
archive log thread=1 sequence=86356
channel aux1: restoring archive log
archive log thread=1 sequence=86357
channel aux1: restoring archive log
archive log thread=1 sequence=86358
channel aux1: restoring archive log
archive log thread=1 sequence=86359
channel aux1: restoring archive log
archive log thread=1 sequence=86360
channel aux1: restoring archive log
archive log thread=1 sequence=86361
channel aux1: restoring archive log
archive log thread=1 sequence=86362
channel aux1: restoring archive log
archive log thread=1 sequence=86363
channel aux1: restoring archive log
archive log thread=1 sequence=86364
channel aux1: restoring archive log
archive log thread=1 sequence=86365
channel aux1: restoring archive log
archive log thread=1 sequence=86366
channel aux1: restoring archive log
archive log thread=1 sequence=86367
channel aux1: restoring archive log
archive log thread=1 sequence=86368
channel aux1: restoring archive log
archive log thread=1 sequence=86369
channel aux1: restoring archive log
archive log thread=1 sequence=86370
channel aux1: restoring archive log
archive log thread=1 sequence=86371
channel aux1: restoring archive log
archive log thread=1 sequence=86372
channel aux1: restoring archive log
archive log thread=1 sequence=86373
channel aux1: restoring archive log
archive log thread=1 sequence=86374
channel aux1: reading from backup piece /arch1_PROD_tcjc4jd7/
ORA-19870: error reading backup piece /arch1_PROD_tcjc4jd7/
ORA-19510: failed to set size of 182123 blocks for file "/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86358.log" (blocksize=512)
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 9
channel aux1: starting archive log restore to default destination
channel aux1: restoring archive log
archive log thread=1 sequence=86399
channel aux1: restoring archive log
archive log thread=1 sequence=86400
channel aux1: restoring archive log
archive log thread=1 sequence=86401
channel aux1: restoring archive log
archive log thread=1 sequence=86402
channel aux1: restoring archive log
archive log thread=1 sequence=86403
channel aux1: restoring archive log
archive log thread=1 sequence=86404
channel aux1: reading from backup piece /arch1_PROD_tgjc4qf4/
channel aux2: starting archive log restore to default destination
channel aux2: restoring archive log
archive log thread=1 sequence=86356
channel aux2: restoring archive log
archive log thread=1 sequence=86357
channel aux2: restoring archive log
archive log thread=1 sequence=86358
channel aux2: restoring archive log
archive log thread=1 sequence=86359
channel aux2: restoring archive log
archive log thread=1 sequence=86360
channel aux2: restoring archive log
archive log thread=1 sequence=86361
channel aux2: restoring archive log
archive log thread=1 sequence=86363
channel aux2: restoring archive log
archive log thread=1 sequence=86364
channel aux2: restoring archive log
archive log thread=1 sequence=86365
channel aux2: restoring archive log
archive log thread=1 sequence=86366
channel aux2: restoring archive log
archive log thread=1 sequence=86367
channel aux2: restoring archive log
archive log thread=1 sequence=86368
channel aux2: restoring archive log
archive log thread=1 sequence=86369
channel aux2: restoring archive log
archive log thread=1 sequence=86370
channel aux2: restoring archive log
archive log thread=1 sequence=86371
channel aux2: restoring archive log
archive log thread=1 sequence=86372
channel aux2: restoring archive log
archive log thread=1 sequence=86373
channel aux2: restoring archive log
archive log thread=1 sequence=86374
channel aux2: reading from backup piece /arch1_PROD_t9jc4iki/
channel aux1: restored backup piece 1
piece handle=/arch1_PROD_tgjc4qf4/ tag=TAG20080325T080139
channel aux1: restore complete, elapsed time: 00:01:56
channel aux1: starting archive log restore to default destination
channel aux1: restoring archive log
archive log thread=1 sequence=86405
channel aux1: restoring archive log
archive log thread=1 sequence=86406
channel aux1: restoring archive log
archive log thread=1 sequence=86407
channel aux1: restoring archive log
archive log thread=1 sequence=86408
channel aux1: reading from backup piece /arch1_PROD_tfjc4qf4/
channel aux1: restored backup piece 1
piece handle=/arch1_PROD_tfjc4qf4/ tag=TAG20080325T080139
channel aux1: restore complete, elapsed time: 00:02:05
channel aux1: starting archive log restore to default destination
channel aux1: restoring archive log
archive log thread=1 sequence=86409
channel aux1: reading from backup piece /arch1_PROD_tkjc51fm/
channel aux1: restored backup piece 1
piece handle=/arch1_PROD_tkjc51fm/ tag=TAG20080325T100124
channel aux1: restore complete, elapsed time: 00:02:15
channel aux2: restored backup piece 1
piece handle=/arch1_PROD_t9jc4iki/ tag=TAG20080325T054759
channel aux2: restore complete, elapsed time: 00:12:10
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86356.log thread=1 sequence=86356
channel clone_default: deleting archive log(s)
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86356.log recid=44 stamp=650313112
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86357.log thread=1 sequence=86357
channel clone_default: deleting archive log(s)
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86357.log recid=45 stamp=650313112
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86358.log thread=1 sequence=86358
channel clone_default: deleting archive log(s)
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86358.log recid=37 stamp=650313085
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86359.log thread=1 sequence=86359
channel clone_default: deleting archive log(s)
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86359.log recid=38 stamp=650313085
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86360.log thread=1 sequence=86360
channel clone_default: deleting archive log(s)
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86360.log recid=52 stamp=650313135
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86361.log thread=1 sequence=86361
channel clone_default: deleting archive log(s)
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86361.log recid=40 stamp=650313085
unable to find archive log
archive log thread=1 sequence=86362
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u01/lun0/hanfa2/system01.dbf'
released channel: t1
released channel: aux1
released channel: aux2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/25/2008 18:32:26
RMAN-03015: error occurred in stored script Memory Script
RMAN-06055: could not find log sequence 86362 thread 1
Recovery Manager complete.Yes :-).
Also when i run recover database using backup controlfile;and try to apply redo logs i am getting:ORA-00309: log belongs to wrong database Do you have any advice on this ? -
Could not find agent library on the library path or in the local directory
Hi all,
I'm trying to write a jvmti agent that write any information in a mysql db. I've written a simple agent that work correctly and now I'll try to insert the mysqlpp library in my agent:
1) I've added #include <mysql++.h>
2) and I've added mysqlpp::Connection conn(false); (global variable)
I've modify my Makefile and the compiler and linker work correctly but when I test the agent the VM says "Could not find agent library on the library path or in the local directory"
Below the code:
-- analizer.cpp --
#include <iostream>
#include <stdlib.h>
#include <jni.h>
#include <string.h>
#include <jvmti.h>
#include <mysql++.h>
#include "ClassDetail.cpp"
#define CFN(ptr) checkForNull(ptr, __FILE__, __LINE__);
static void checkForNull(void *ptr, const char* file, int line) {
if(ptr == NULL) {
std::cerr << "ERROR : NullPointerException in " << file <<":"<< line<<"\n";
abort();
static char* getErrorName(jvmtiEnv *jvmti, jvmtiError err) {
jvmtiError errNum;
char *name;
errNum = jvmti->GetErrorName(err, &name);
if( errNum != JVMTI_ERROR_NONE) {
std::cerr << "ERROR : errore nel reprire l'error name " << errNum;
abort();
return name;
#define CJVMTIE(jvmti, err) checkJvmtiError(jvmti, err, __FILE__, __LINE__);
static void checkJvmtiError(jvmtiEnv *jvmti, jvmtiError err, const char* file, int line) {
if(err != JVMTI_ERROR_NONE) {
char *name = getErrorName(jvmti, err);
std::cout << "ERROR : JVMTI error " << err << "("<<name<<") in "<<file<<":"<<line;
abort();
static void vmInit(jvmtiEnv *jvmti_env, JNIEnv *jni, jthread thread);
static void startGCEvent(jvmtiEnv *jvmti_env);
static void finishGCEvent(jvmtiEnv *jvmti_env);
static jvmtiIterationControl JNICALL heapObject(jlong tag, jlong size, jlong* tag_ptr, void* userData);
jrawMonitorID lock;
int gc_count;
long heapSize = 0;
bool heapCheck = false;
mysqlpp::Connection conn(false);
JNIEXPORT jint JNICALL Agent_OnLoad(JavaVM *vm, char *options, void *reserved) {
std::cout<<"OnLoad\n";
jint rc;
jvmtiEnv *jvmti = NULL;
jvmtiError err;
jvmtiCapabilities capabilities;
jvmtiEventCallbacks callbacks;
rc = vm->GetEnv((void **)&jvmti, JVMTI_VERSION);
if( rc != JNI_OK) {
std::cout << "ERROR : Errore nell'ottenere 'environment rc = " << rc;
return -1;
CFN(jvmti);
err = jvmti->GetCapabilities(&capabilities);
CJVMTIE(jvmti, err);
CFN(&capabilities);
capabilities.can_generate_garbage_collection_events = true;
capabilities.can_tag_objects = true;
CJVMTIE(jvmti, jvmti->AddCapabilities(&capabilities));
CJVMTIE(jvmti, jvmti->CreateRawMonitor("agent lock", &lock));
callbacks.VMInit = &vmInit;
callbacks.GarbageCollectionStart = &startGCEvent;
callbacks.GarbageCollectionFinish = &finishGCEvent;
CJVMTIE(jvmti, jvmti->SetEventCallbacks(&callbacks, sizeof(callbacks)));
jvmti->SetEventNotificationMode(JVMTI_ENABLE, JVMTI_EVENT_VM_INIT, NULL);
jvmti->SetEventNotificationMode(JVMTI_ENABLE, JVMTI_EVENT_GARBAGE_COLLECTION_START, NULL);
jvmti->SetEventNotificationMode(JVMTI_ENABLE, JVMTI_EVENT_GARBAGE_COLLECTION_FINISH, NULL);
return 0;
JNIEXPORT void JNICALL Agent_OnUnload(JavaVM *vm)
std::cout<<"OnUnload\n";
static void JNICALL worker(jvmtiEnv *jvmti, JNIEnv *jni, void *p) {
std::cout << "worker";
for (;;) {
CJVMTIE(jvmti, jvmti->RawMonitorEnter(lock));
while (gc_count == 0) {
CJVMTIE(jvmti, jvmti->RawMonitorWait(lock, 0));
jvmti->RawMonitorExit(lock);
gc_count = 0;
jvmti->RawMonitorExit(lock);
/* Perform arbitrary JVMTI/JNI work here to do post-GC cleanup */
if(!heapCheck) {
heapCheck = true;
jint count;
jclass *classes;
CJVMTIE(jvmti, jvmti->GetLoadedClasses(&count, &classes));
ClassDetail *details = (ClassDetail*)calloc(sizeof(ClassDetail), count);
for(int i = 0; i < count; i++) {
char *sig;
CJVMTIE(jvmti, jvmti->GetClassSignature(classes, &sig, NULL));
CFN(sig);
details[i] = ClassDetail(strdup(sig));
CJVMTIE(jvmti, jvmti->SetTag(classes[i], (jlong)(ptrdiff_t)(void*) (&details[i])));
heapSize = 0;
CJVMTIE(jvmti, jvmti->IterateOverHeap(JVMTI_HEAP_OBJECT_EITHER, &heapObject, NULL));
std::cout << "Heap Memory : " << heapSize<<'\n';
heapCheck = false;
static void vmInit(jvmtiEnv jvmti, JNIEnv jni, jthread thread) {
jclass clazz = jni->FindClass("java/lang/Thread");
jmethodID mid = jni->GetMethodID(clazz, "<init>", "()V");
jthread _thread = jni->NewObject(clazz, mid);
CJVMTIE(jvmti, jvmti->RunAgentThread(_thread, &worker, NULL, JVMTI_THREAD_MAX_PRIORITY));
static void startGCEvent(jvmtiEnv *jvmti) {
static void finishGCEvent(jvmtiEnv *jvmti) {
std::cout << "****************************************************************** <<<<<<<<<<<< Finito gc\n";
gc_count++;
CJVMTIE(jvmti,jvmti->RawMonitorEnter(lock));
CJVMTIE(jvmti,jvmti->RawMonitorNotify(lock));
CJVMTIE(jvmti,jvmti->RawMonitorExit(lock));
static jvmtiIterationControl JNICALL heapObject(jlong tag, jlong size, jlong* tag_ptr, void* userData) {
if(tag != (jlong) 0) {
std::cout << "Tag : " << tag<< '\n';
ClassDetail detail = (ClassDetail) (void*) (ptrdiff_t) tag;
char *sig = detail->getSignature();
std::cout << "Class " << sig << " size : " << size<<'\n';
heapSize += size;
return JVMTI_ITERATION_CONTINUE;
-- ClassDetail.cpp --class ClassDetail {
private:
char* signature;
public:
ClassDetail(char* signature){
this->signature = signature;
char* getSignature() { return this->signature;}
--Makefile--########################################################################
# Sample GNU Makefile for building JVMTI Demo waiters
# Example uses:
# gnumake JDK=<java_home> OSNAME=solaris [OPT=true] [LIBARCH=sparc]
# gnumake JDK=<java_home> OSNAME=solaris [OPT=true] [LIBARCH=sparcv9]
# gnumake JDK=<java_home> OSNAME=linux [OPT=true]
# gnumake JDK=<java_home> OSNAME=win32 [OPT=true]
# Source lists
LIBNAME=analizer
SOURCES=analizer.cpp
MYSQLPP_LIB_PATH=/home/claudio/Desktop/Scaricati2/mysql++-3.0.6/mysqlpp_lib/lib/
MYSQLPP_HEADER_PATH=/home/claudio/Desktop/Scaricati2/mysql++-3.0.6/mysqlpp_lib/include/mysql++
MYSQL_PATH=/opt/mysql-5.0.51a-linux-i686-icc-glibc23
# Solaris Sun C Compiler Version 5.5
ifeq ($(OSNAME), solaris)
# Tell gnumake which compilers to use
CC=cc
CXX=CC
# Sun Solaris Compiler options needed
COMMON_FLAGS=-mt -KPIC
# Check LIBARCH for any special compiler options
LIBARCH=$(shell uname -p)
ifeq ($(LIBARCH), sparc)
COMMON_FLAGS+=-xarch=v8 -xregs=no%appl
endif
ifeq ($(LIBARCH), sparcv9)
COMMON_FLAGS+=-xarch=v9 -xregs=no%appl
endif
ifeq ($(OPT), true)
CXXFLAGS=-xO2 $(COMMON_FLAGS)
else
CXXFLAGS=-g $(COMMON_FLAGS)
endif
# Object files needed to create library
OBJECTS=$(SOURCES:%.cpp=%.o)
# Library name and options needed to build it
LIBRARY=lib$(LIBNAME).so
LDFLAGS=-z defs -ztext
# Libraries we are dependent on
LIBRARIES= -lc
# Building a shared library
LINK_SHARED=$(LINK.cc) -G -o $@
endif
# Linux GNU C Compiler
ifeq ($(OSNAME), linux)
# GNU Compiler options needed to build it
COMMON_FLAGS=-fno-strict-aliasing -fPIC -fno-omit-frame-pointer
# Options that help find errors
COMMON_FLAGS+= -W -Wall -Wno-unused -Wno-parentheses
ifeq ($(OPT), true)
CXXFLAGS=-O2 $(COMMON_FLAGS)
else
CXXFLAGS=-g $(COMMON_FLAGS)
endif
# Object files needed to create library
OBJECTS=$(SOURCES:%.cpp=%.o)
# Library name and options needed to build it
LIBRARY=lib$(LIBNAME).so
LDFLAGS=-Wl,-soname=$(LIBRARY) -static-libgcc -mimpure-text
LDFLAGS += -lmysqlpp
# Libraries we are dependent on
LIBRARIES=
# Building a shared library
LINK_SHARED=$(LINK.cc) -shared -o $@
endif
# Windows Microsoft C/C++ Optimizing Compiler Version 12
ifeq ($(OSNAME), win32)
CC=cl
# Compiler options needed to build it
COMMON_FLAGS=-Gy -DWIN32
# Options that help find errors
COMMON_FLAGS+=-W0 -WX
ifeq ($(OPT), true)
CXXFLAGS= -Ox -Op -Zi $(COMMON_FLAGS)
else
CXXFLAGS= -Od -Zi $(COMMON_FLAGS)
endif
# Object files needed to create library
OBJECTS=$(SOURCES:%.cpp=%.obj)
# Library name and options needed to build it
LIBRARY=$(LIBNAME).dll
LDFLAGS=
# Libraries we are dependent on
LIBRARIES=
# Building a shared library
LINK_SHARED=link -dll -out:$@
endif
# Common -I options
CXXFLAGS += -I.
#CXXFLAGS += -I../agent_util
CXXFLAGS += -I$(JDK)/include -I$(JDK)/include/$(OSNAME)
CXXFLAGS += -I$(MYSQLPP_HEADER_PATH) -I$(MYSQL_PATH)/include -L$(MYSQLPP_LIB_PATH) -I$(MYSQLPP_LIB_PATH)
# Default rule
all: $(LIBRARY)
# Build native library
$(LIBRARY): $(OBJECTS)
$(LINK_SHARED) $(OBJECTS) $(LIBRARIES)
# Cleanup the built bits
clean:
rm -f $(LIBRARY) $(OBJECTS)
# Simple tester
test: all
LD_LIBRARY_PATH=`pwd` $(JDK)/bin/java -agentlib:$(LIBNAME) -jar jvmti-test.jar
#LD_LIBRARY_PATH=`pwd` $(JDK)/bin/java -agentlib:$(LIBNAME) -version
# Compilation rule only needed on Windows
ifeq ($(OSNAME), win32)
%.obj: %.cpp
$(COMPILE.cc) $<
endifDid you make sure your library (call it x) starts is named libx.so (atleast, on linux, possibly libx.dll on windows, not sure)? It will not load otherwise, and you must specify -agentlib:x (rather than saying libx.so). Yes, it is "funny" how it gives the same uninformative error message for a wide variety of errors. It will also give you this same error message if there are still unresolved symbols upon loading your library (which would be my second guess).
-
Error-RC-20200: Fatal: Could not find Unzip. At this time only Native UnZip
Hi all,
I am installing 12.1.1 in Oracle linux 6.1 server 64bit, while starting rapidwiz getting error
"RC-20200: Fatal: Could not find Unzip. At this time only Native UnZip 5.X is supported.
Please make sure you have UnZip 5.X in your path and try again...
Unable to complete install of database
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process
i am straggling for last two day, pleas help me move forward.
Thanks a lot...
Regard
KSURESHI am installing 12.1.1 in Oracle linux 6.1 server 64bit, while starting rapidwiz getting error Your OS is not certified with R12, so please install a certified one -- Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Thanks,
Hussein -
Error: Could not find file for old Adobe Reader Bundle
We are running Zenworks 11.2.3a (just upgraded to this version last week) on a linux server. Today, I received calls from a number of users, their computers were displaying the following error message:
Could not find the file "/var/opt/novell/zenworks/content-repo/tmp/zpm/plp//windows/x86/en/E8833D51-5176-4B73-B6D2-A47603C3270D.plp" to install.
They are getting this pop-up message 2 times every time Zenworks refreshes.
I tried to find this file on the Zenworks server but the directory does not exist on the server. In fact, I can only navigate as far as /var/opt/novell/zenworks/content-repo/tmp/zpm - there is only one folder in this directory named dauzip.
Here is the error message from the zmd-messages.log on one of the workstations:
[GenericActions.FileCouldNotBeFound] [Could not find the file "/var/opt/novell/zenworks/content-repo/tmp/zpm/plp//windows/x86/en/E8833D51-5176-4B73-B6D2-A47603C3270D.plp" to install.] [] [fd868047b8dda3fab8f372c803a2a4f3]
Any idea what's causing this error or how to fix it?No idea what is causing this.
To fix, maybe just delete the bundle and create a new one ? -
I think I downloaded the latest Solaris Studio version. When I compile my code, I got the following error:
bash-3.00$ gmake -f Makefile.sun
CC -c -o metadata.o metadata.cpp -I. -I.. -g -O0 -std=c++11 -I/export/home/oracle/zhifan/boost_1_55_0 -I/export/home/oracle/zhifan/instantclient_11_2/sdk/include -V
CC: Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17
ccfe: Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17
"metadata.cpp", line 20: Warning: db hides databus::MetadataManager::db.
"metadata.cpp", line 26: Warning: db hides databus::MetadataManager::db.
Error: Could not find a match for std::_Tuple_impl<0, unsigned&&>::_Tuple_impl(std::tuple<unsigned&&>, unsigned) needed in std::tuple<unsigned&&>::tuple<unsigned, void>(unsigned&&).
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868: Where: While instantiating "std::tuple<unsigned&&>::tuple<unsigned, void>(unsigned&&)".
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868: Where: Instantiated from std::forward_as_tuple<unsigned>(unsigned&&).
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/bits/stl_map.h", line 485: Where: Instantiated from non-template code.
1 Error(s) and 2 Warning(s) detected.
gmake: *** [metadata.o] Error 2
with the same code, It can be compiled with g++ on Linux platform.
1 Is the issue same as 12.4 Beta, Error: Could not find a match for std::_Tuple_impl<0, std::string &&>::_Tuple_impl(std::tuple<std::string &&> ?
2 Do we have any workaround for this issue?
3 When will the final 12.4 release be available?I can't say for sure whether your problem is fixed in the final release without a test case, but I'd say the chances are very good.
The final release will be announced soon. Watch this space, or the Oracle Solaris Studio page for an announcement. -
Logon failed. Details: mscorlib : Could not find file.... XSD
I have been searching the forums and the web for hours and have not found a solution to a problem we are having. We upgraded our reports from VS.NET 2003 to VS.NET 2008 and started getting the below error upon our Report.Export code.
Logon failed. Details: mscorlib : Could not find file 'C:\Inetpub\wwwroot\xxx\ConsolidatedReports\Designers\xxxFringe\xxxFringeFunderDetail.xsd'. Failed to export the report. Error in File C:\WINDOWS\TEMP\temp_90ed8e07-481c-4bdb-8c50-885854a143d0 {B8EC61FE-7931-4979-AD92-432C21013D77}.rpt: Unable to connect: incorrect log on parameters.
So when I verify the XSD and set the data source location (XML File Path: C:\Inetpub\wwwroot\xxx\ConsolidatedReports\Designers\xxxFringe\xxxFringe.xsd) the report works fine. The problem is that when another developer trys to run the report on their machine and their machine has a different path for the code, the report fails. The odd thing is that some of our reports are working fine, it is only a few that basically are looking for the hard coded XSD path.
So, as far as I can tell the XSD are not needed (Re: ADO.Net (XML) Data Source File Path). I have applied SP1 for Crystal Reports. I am totally confused why this started and why the report is looking for a "hard coded" path to the XSD.The RunReport is called by a button click on a form. This method calls ExportFile which works until the line "Report.Export()" is hit.
Public Overrides Function RunReport(ByVal ReportID As Short) As String
Dim Utility As New Utility(Session("CNReportPath"))
Dim Report As New rptIndividualSalaryFringe
Dim db As New BudgetDB(Session("CNReportPath"))
Dim pDB As New ProgramDB(Session("CNReportPath"))
Dim dsRep, dsSub As DataSet
Dim AgencyID As Integer = Program1.AgencyID
Dim ProgramID As Integer = Program1.ProgramID
Dim FyID As Integer = FiscalYear1.SelectedValue
Dim ShowOnlyCSCFunded As Integer = IIf(chkShowCSCFunded.Checked = True, 1, 0)
Dim ContractNumber, AgencyName As String
Dim ReportEnv As String = Environment
Dim ReportDB As String = DBName
dsRep = db.GetIndividualSalaryFringe(AgencyID, ProgramID, FyID, ShowOnlyCSCFunded)
'dsRep.WriteXmlSchema(Server.MapPath("~/ConsolidatedReports/Designers/IndividualSalaryFringe/IndividualSalaryFringe.xsd"))
AgencyName = pDB.GetAgencyName(AgencyID)
With Report.Section1
CType(.ReportObjects("txtAgency"), TextObject).Text = AgencyName
CType(.ReportObjects("txtProgram"), TextObject).Text = pDB.GetProgramName(ProgramID)
CType(.ReportObjects("txtFiscalYear"), TextObject).Text = "Fiscal Year " & FiscalYear1.SelectedText
End With
ContractNumber = pDB.GetContractNumber(ProgramID)
If Not IsNothing(ContractNumber) Then
If Not ContractNumber = "" Then
With Report.Section6
.SectionFormat.EnableSuppress = False
CType(.ReportObjects("txtContractNumber"), TextObject).Text = "Contract #:" & ContractNumber
End With
End If
End If
With Report.Section5
CType(.ReportObjects("txtAgencyName"), TextObject).Text = AgencyName
End With
If dsRep.Tables(0).Rows.Count <= 0 Then
Report.secNoData.SectionFormat.EnableSuppress = False
Report.Section2.SectionFormat.EnableSuppress = True
Report.Section4.SectionFormat.EnableSuppress = True
Report.Section7.SectionFormat.EnableSuppress = True
Report.Section9.SectionFormat.EnableSuppress = True
Report.Section10.SectionFormat.EnableSuppress = True
Report.secFunderDetail.SectionFormat.EnableSuppress = True
Else
dsSub = db.GetIndividualSalaryFringeFunderDetail(ProgramID, FyID)
'dsSub.WriteXmlSchema(Server.MapPath("~/ConsolidatedReports/Designers/IndividualSalaryFringe/IndividualSalaryFringeFunderDetail.xsd"))
Report.OpenSubreport("subFunderDetail").SetDataSource(dsSub)
End If
'Ehn 41 add environment and db name
CType(Report.Section5.ReportObjects("DBName"), TextObject).Text = "DB: " + ReportDB
CType(Report.Section5.ReportObjects("Environment"), TextObject).Text = IIf(ReportEnv = "", ReportEnv, "Env: " + ReportEnv)
Report.SetDataSource(dsRep)
'You must set the ReportGroup equal to Crystal to make it work correctly
ReportGroup = ReportGroup.Crystal
'Leave this line of code
ReportFile = Utility.ExportFile(Report, ExportFilter1.ExportType, Server.MapPath("~/ReportFiles/"))
Return String.Empty
End Function
Public Function ExportFile(ByVal Report As ReportDocument, ByVal ExportType As ExportType, ByVal OutputPath As String, Optional ByVal ds As DataSet = Nothing) As String
Dim crDiskFileOpts As New DiskFileDestinationOptions
'Dim strFilePath As String
'Dim strLinkPath As String
Dim crExportOptions As New ExportOptions
Dim crExcelOptions As New ExcelFormatOptions
Dim crPDFOptions As New PdfRtfWordFormatOptions
Dim crWordOptions As New PdfRtfWordFormatOptions
Dim ReportName As String = String.Empty
Try
crExportOptions = Report.ExportOptions
Select Case ExportType
Case ExportType.Excel
ReportName = Left(Guid.NewGuid.ToString, 15) & ".xls"
With crExcelOptions
.ExcelTabHasColumnHeadings = True
.ExcelUseConstantColumnWidth = True
End With
crExportOptions.ExportFormatType = ExportFormatType.Excel
crExportOptions.FormatOptions = crExcelOptions
Case ExportType.PDF
ReportName = Left(Guid.NewGuid.ToString, 15) & ".pdf"
crExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat
crExportOptions.FormatOptions = crPDFOptions
Case ExportType.Word
ReportName = Left(Guid.NewGuid.ToString, 15) & ".doc"
crExportOptions.ExportFormatType = ExportFormatType.WordForWindows
crExportOptions.FormatOptions = crWordOptions
Case SamisConstants.ExportType.ExcelRaw
ReportName = Left(Guid.NewGuid.ToString, 15) & ".xls"
''If Not IsNothing(ds) Then
'' Dim oExcel As New ExcelExport.ExcelExport
'' oExcel.CreateWorkbook(OutputPath & ReportName, ds)
''End If
End Select
Select Case ExportType
Case ExportType.Excel, ExportType.PDF, ExportType.Word
crDiskFileOpts.DiskFileName = OutputPath & ReportName
With crExportOptions
.DestinationOptions = crDiskFileOpts
.ExportDestinationType = ExportDestinationType.DiskFile
End With
Report.Export() ' ERROR HAPPENS HERE!!!!!!
End Select
Return "ReportFiles/" & ReportName
Catch ex As Exception
Throw ex
End Try
End Function -
[C077] Could not find symbol 'SQLAllocConnect'
I try to connect Oracle to PostgreSQL with Heterogeneous Connectiviti.
I'm work on:
S.O.: Linux SUSE 9.2
PostgreSQL: 8.0
Oracle: 10g Enterprise Edition Release 10.1.0.2.0
psqlODBC:07-03
The configuration of HS is:
listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = locahost)(PORT = 1521))
(DESCRIPTION =
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
(ADDRESS = (PROTOCOL = TCP)(HOST = locahost)(PORT = 2481))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /home/oracle/product/oracle10)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = local)
(ORACLE_HOME = /home/oracle/product/oracle10)
(SID_NAME = local)
tnsnames.ora
hsodbc.world = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
(CONNECT_DATA=(SID=hsodbc))
(HS=OK)
local.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = local)
inithsodbc.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = hsodbc
HS_FDS_TRACE_LEVEL = on
HS_FDS_TRACE_FILE_NAME= /usr/local/lib/hsodbc.trc
HS_FDS_SHAREABLE_NAME = /usr/local/lib/psqlodbc.so
set ODBCSYSINI=/etc/unixODBC/odbc.ini
The configuration of ODBC is:
[ODBC Data Sources]
hsodbc = PostgreSQL ODBC Driver DSN
[hsodbcL]
Description = PostgreSQL
Driver = /usr/local/lib/psqlodbc.so
Trace = Yes
TraceFile = /tmp/sql.log
Database = GESTION
Servername = 167.175.51.178
Username = user
Password = password
Port = 5432
Protocol = 6.4
ReadOnly = No
RowVersioning = No
ShowSystemTables = No
ShowOidColumn = No
FakeOidIndex = No
ConnSettings =
FileUsage = 1
I'm create table "TEMP":
SQL>cerate table TEMP(id numeric);
SQL>table created.
and create dblink:
SQL>CREATE PUBLIC DATABASE LINK hsodbc CONNECT TO "postgres" IDENTIFIED BY "postgres" USING 'hsodbc';
SQL>Database link created.
When i execute
SQL>select * from "TEMP"@hsodbc;
select * from "TEMP"@hsodbc
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC]DRV_InitTdp: DB_ODBC_INTERFACE (718): ; [C077]
Could not find symbol 'SQLAllocConnect' in dynamic library
DB_ODBC_INTERFACE (722): ; [C079] Failed to load dynamic library
'/usr/local/lib/psqlodbc.so'
ORA-02063: preceding 3 lines from HSODBC
what i can do for solve this problem?Whe i'm use
HS_FDS_SHAREABLE_NAME = /usr/local/lib/psqlodbc.so
The trace log say:
[Generic Connectivity Using ODBC] version: 4.1.0.0.0050
connect string is: defTdpName=hsodbc;SYNTAX=(ORACLE8_HOA, BASED_ON=ORACLE8,
IDENTIFIER_QUOTE_CHAR="",
CASE_SENSITIVE=CASE_SENSITIVE_QUOTE);BINDING=<navobj><binding><datasources><da-
tasource name='hsodbc' type='GENERIC_ODBC_FOR_HS'
connect='hsodbc'><driverProperties/></datasource></datasources><remoteMachines-
/><environment><misc year2000Policy='-1' consumerApi='1'
sessionBehavior='4'/><queryProcessor parserDepth='2000'
noInsertParameterization='true' noThreadedReadAhead='true'
noCommandReuse='true'/></environment></binding></navobj>
ORACLE GENERIC GATEWAY Log File Started at 22-Mar-06 17:13:28
/usr/local/lib/psqlodbc.so: undefined symbol: ucs2_to_utf8
[C077] Could not find symbol 'SQLAllocConnect' in dynamic library
[C079] Failed to load dynamic library '/usr/local/lib/psqlodbc.so'
[C077] Could not find symbol 'SQLAllocConnect' in dynamic library
[C077] Could not find symbol 'SQLAllocConnect' in dynamic library
[C079]
Failed to load dynamic library '/usr/local/lib/psqlodbc.so'
And When i'm use
HS_FDS_SHAREABLE_NAME = /usr/lib/libodbc.so
The trace log say:
[Generic Connectivity Using ODBC] version: 4.1.0.0.0050
connect string is: defTdpName=hsodbc;SYNTAX=(ORACLE8_HOA, BASED_ON=ORACLE8,
IDENTIFIER_QUOTE_CHAR="",
CASE_SENSITIVE=CASE_SENSITIVE_QUOTE);BINDING=<navobj><binding><datasources><da-
tasource name='hsodbc' type='GENERIC_ODBC_FOR_HS'
connect='hsodbc'><driverProperties/></datasource></datasources><remoteMachines-
/><environment><misc year2000Policy='-1' consumerApi='1'
sessionBehavior='4'/><queryProcessor parserDepth='2000'
noInsertParameterization='true' noThreadedReadAhead='true'
noCommandReuse='true'/></environment></binding></navobj>
ORACLE GENERIC GATEWAY Log File Started at 23-Mar-06 11:49:37
but the problem still haped. -
Could not find agent library in absolute path
Hi,
I have a JVMTI agent which works on windows that I am trying to port to linux.
I have compiled to code on Ubuntu 10.04 using Eclipse and have created shared library .so file.
When I try to run an application with the agentpath argument, I get the error: "Could not find agent library in absolute path"
When trying to run the mtrace sample from the java JDK, it works fine.
My Java version is:
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) Client VM (build 16.3-b01, mixed mode, sharing)
I also tried running nm | grep Agent_OnLoad and got the following:
00029220 T Agent_OnLoad
00036230 b ZGVZ12AgentOnLoadE4data
00030720 r ZZ12AgentOnLoadE19__PRETTY_FUNCTION__
00036240 b ZZ12AgentOnLoadE4data
My agent references several libraries such as boost asio and log4cxx could it be related somehow to these?
I think it might be some sort of compilation issue because on windows it works fine.
ThanksI managed to solve my problem.
It turned out that the error was caused by missing referenced libraries that were not linked in to my so file.
Once I added all of the required libraries, the agent started working. -
Could not find -Xrun library: libjmeter.sl
Hi ..
My environment is:
[oracle@yavuz] /oracle # uname -a
HP-UX yavuz B.11.11 U 9000/800 4205714048 unlimited-user license
[oracle@yavuz] /oracle # java -version
java version "1.4.2.10"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2.10-060112-14:28)
Java HotSpot(TM) Server VM (build 1.4.2 1.4.2.10-060112-16:07-PA_RISC2.0 PA2.0 (aCC_AP), mixed mode)
And Oracle 10g App Server..
I have installed HP Jmeter 3.0 and followed the installation instructions. I have added
-Xbootclasspath/a:/opt/hpjmeter/lib/agent.jar
-Xrunjmeter
to my Java options.. (in Oracle App Serv.)
In .profile
SHLIB_PATH=$ORACLE_HOME/lib32:$ORACLE_HOME/rdbms/lib32:/opt/hpjmeter/lib
/PA_RISC2.0;export SHLIB_PATH
(libjmeter.sl is in /opt/hpjmeter/lib/PA_RISC2.0)
Note: I have also tried to change LD_LIBRARY_PATH (with/without SHLIB_PATH)
and I have updated my env with
. .profile
And I When I run my Oracle App, got the following error message
Error occurred during initialization of VM
Could not find -Xrun library: libjmeter.sl
What can be the problem.. ?
TIAI had the same error message.
I forgot to set the SHLIB_PATH. So after reading your post, I set this variable (actually I did it in the app startup script rather than in .profile, since root has to start the app in question).
After this all worked, so I would suspect your env variable is not being applied somehow. -
Could not find class (CalculatorImpl_Stub) at codebase ()
hi
im trying to use rmi on my linux machine...
a have jared CalculatorServer and CalculatorClient
$ jar tf CalculatorServer.jar
META-INF/
META-INF/MANIFEST.MF
Calculator.class
CalculatorImpl.class
CalculatorImpl_Stub.class
CalculatorServer.class
$ jar tf CalculatorClient.jar
META-INF/
META-INF/MANIFEST.MF
Calculator.class
CalculatorImpl_Stub.class
CalculatorClient.class
$ ps -ef | grep rmi
boris 5347 5221 0 15:08 pts/3 00:00:00 rmiregistrymy rmiregistry is running....
$ java -jar CalculatorServer.jar -a localhost
rmi://localhost:1099/CalculatorService
Trouble: java.rmi.UnexpectedException: undeclared checked exception; nested exception is:
java.lang.ClassNotFoundException: Could not find class (CalculatorImpl_Stub) at codebase ()when i try to run my rmi server (on localhost) it outputs this...
if i unjar files and then run server like java CalculatorServer -a localhost it works fine...
i dont know why.... my stub file is in jar.... and i'm idealess...now when i try to launch this jar file like this
$ java -Djava.rmi.server.codebase=/home/boris/java/rmiCalculator/CalculatorServer.jar -jar CalculatorServer.jar -a localhost &
[3] 4943
boris@bm:~/java/rmiCalculator$ rmi://localhost:1099/CalculatorService
Trouble: java.rmi.UnmarshalException: Error unmarshaling return; nested exception is:
java.net.MalformedURLException: no protocol: /home/boris/java/rmiCalculator/CalculatorServer.jarand if try like this ... same problem
$ java -Djava.rmi.server.codebase=/home/boris/java/rmiCalculator/ -jar CalculatorServer.jar -a localhost &
[2] 4930
boris@bm:~/java/rmiCalculator$ rmi://localhost:1099/CalculatorService
Trouble: java.rmi.UnmarshalException: Error unmarshaling return; nested exception is:
java.net.MalformedURLException: no protocol: /home/boris/java/rmiCalculator/
$ pwd
/home/boris/java/rmiCalculator
Maybe you are looking for
-
How do I Install Classic on 10.3.9?
I already have Classic on my wife's computer internal HD. I'm now setting up an external drive from scratch with the DVD install that came with the computer 10.3.7 . + updates 10.3.9 I'm not sure (don't remember) if OS9 classic came with OSX 10.3.7,
-
My ipad will no longer connect to the tv after software upate
until recently my ipad connected to tv with adaptor no problem,since update it says not compatable with ipad
-
How to Synchronize an association with Database Changes
Hi, I was wondering if someone has any ideas about how to manage FK changes with the BC associations. In general my questions center around tooling support for re-factoring associations and syncing them with db changes. I have read the following but
-
Hi, I want to separate the db of a DB2 UDB 8 system on NW2004s from the central instance. Is there any guide on that topic? What I've done so far is installing the administration client on the new CI server and copied the sap filesystems over. Profil
-
I need help with N96 RM-247 EMEA
Hello Nokia Team I had My N96 RM-247 EMEA about 4 months ago when i tried to update my phone using NSU it said its updated sucessfully while the Phone keeps blinking Black White Black White Black White NEVER STOPS! then i tried to remove the battery