Could not load libamapc2.dll into apache server 2.0.54

My environment is
JES Access Manager 2005Q4 on Solaris 9 sparc
Apache web server 2.0.54 on Windows 2003 Enterprise
Policy agent 2.2 on Windows 2003 Enterprise Edition to protect my Apache web server 2.0.54
after i install the Policy agent and config it. i start my apache and got following information
Syntax error on line 1 of :/Sun/Access_Manager/Agents/2.2/apache/config/apache_
80/dsame.conf:
Cannot load C:/Sun/Access_Manager/Agents/2.2/apache/bin/libamapc2.dll into serve
r: The specified module could not be found.
my dsame.conf is
LoadModule dsame_module C:\Sun\Access_Manager\Agents\2.2\apache\bin\libamapc2.dll
Agent_Config_File     C:\Sun\Access_Manager\Agents\2.2\apache\config\apache_80\AMAgent.properties
i also chek the libamapc2.dll. it is in the "C:\Sun\Access_Manager\Agents\2.2\apache\bin\"
how can i solve the problem ?

I had this same error, but msvcp70.dll and msvcr70.dll were already in my system32 directory. I took care of the problem by modifying the PATH environment variable to position the "<agent_root>\bin" and "<agent_root>\apache\bin" entries before the system32 path entries.

Similar Messages

  • Win2000 & 1.4.0 Beta2: Could not load jvm.dll

    Question: How does 1.4 Beta2 find it's resources?
    When trying to run Install Anywhere 4.5, I get the error message:
    Can't launch executable.
    Could not load jvm.dll
    Try re-installing the Java VM and change the java VM used by the application
    The call is
    D:\Compiere2\jre\bin\java.exe -Xms16777216 -Xmx50331648 -noverify com.zerog.lax.LAX C:\\Temp\\I1003700413\\Windows\\CUpdate.lax C:\\Temp\\env.prop
    OK, I have about 4 different SDKs installed and I heard that if you deinstall everything else and just install 1.4 Beta 2 - it supposetly works. This is not an option, if you try to install/upgrade an application where the user does not know that a VM is.
    The environment:
    JAVA_HOME is set to a 1.4.0 Beta 2 JRE and the PATH is also pointing to the \bin directory ... and in their server/client sub-directories is the jvm.dll
    I guess, that some registry entry is used ... but where do I find that?

    You're running Java2 from "D:\Compiere2\jre". Does the file "D:\Compiere2\jre\bin\hotspot\jvm.dll" exist? And is this the installation which is Java 1.4?
    As far as where the registry entry is kept, it is in HKEY_LOCAL_MACHINE/Software/JavaSoft. However, this value only seems to be used when you run the java.exe which Sun install in the Windows system directory.

  • Distributed system manager-could not load sysmanui.dll

    Hi all,
    Whenever I try to deploy variables in DSC, it displays "could not load sysmanui.dll file".
    I checked the location "program files>>National Instruments>>LabVIEW11>>shared" and found it was there.
    I am using evaluation version of DSC but LV is licensed.
    Any suggestion for correcting the error is appreciated.
    Thanks.

    Did someone find a solution to this problem? Whenever I tried to open the DSM I get an error message, screenshots below.
    Please Help!

  • Could not load servlet information from web server

    I am trying to register a servlet through the web object manager.
    As soon as click the web object manager menu pick I get the following
    error: Could not load servlet information from web server.
    On other peoples machines here it works fine and they can register
    servlets. What am I missing!

    You must be using Jdev 3.2.x, this is a known bug. In Jdev 9.0.2 we use the standard J2EE web.xml in order to register servlets. You should consider moving to the new IDE.

  • CRVS2010 Beta - Could not load crpe32.dll

    On the report.Load() line I get this message.
    could not load file or assembly "c:\program files\SAP Business Objects\SAP Business Objects Enterprise XI 4.0\Win32_x86\crpe32.dll
    then
    The type initialiizer for 'CrystalDecisions.CrystalReports.Engine.CRPE' threw an expcetion.
    then
    LoadReport failed
    I am using Beta 2 and have the 32 bit runtime installed on my development machine alone with VS 2010 Ultimate.
    Here is the code at that spot.
                   this.report = new ReportDocument();
                   string reportToLoad = @"d:\Receipt.rpt";
                    this.report.Load(reportToLoad);
                    this.reportViewer.ViewerCore.ReportSource = this.report;
    I checked the directory and crpe32.dll is there.
    Bill

    Solved it. I removed both the beta 2 and the runtime beta 2 and reinstalled both. It works fine.

  • Could not load crpe32.dll

    I am using Crystal Reports XI release 2 and we run the reports from a .NET component. The line that produces the error is:
    custReport.Load(reportFile, OpenReportMethod.OpenReportByTempCopy);
    where:
    custReport is an instance of ReportDocument
    reportFile is the path to the rpt file and is correct at runtime.
    Here's the error in it's entirety:
    System.TypeInitializationException: The type initializer for 'CrystalDecisions.CrystalReports.Engine.CRPE' threw an exception. ---> System.Exception: Could not load C:\Program Files\Business Objects\Common\3.5\bin\crpe32.dll.
       at CrystalDecisions.CrystalReports.Engine.CRPE..cctor()
       --- End of inner exception stack trace ---
       at CrystalDecisions.CrystalReports.Engine.CRPE.InitCrpe()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod)
       at TSYS.Report.Generator.ServiceFacade.CrystalReportCreator.CreateReport(Parameter parameter)
       at TSYS.Report.Generator.ServiceFacade.Renderer.GetReportData(String uniqueStackTraceGuid, Int16 clientOriginatorID, Parameter parameter)
       at TSYS.Report.Generator.ServiceFacade.ReportGeneratorFacadeImpl.GetReport(String uniqueStackTraceGuid, Int16 clientOriginatorID, Parameter parameter)
    crpe32.dll is at the location indicated in the exception message and it's version is 11.5.8.998
    The line that produces the error is in CrystalReportCreator.CreateReport
    Thanks for your help
    Chris

    Hi Chris,
    Check this link
    Re: Error 532 "Cannot find database.dll" <Execute PEStartPrintJob>
    Re: Error loading Crystal Reports with Delphi 2006
    *Close the thread if issue solved
    Regards
    Jambulingam.P

  • Firefox starts with a "could not load xpcom.dll" error.

    When I open Firefox, I sometimes get the error message as per subject. It only happens 1 out of 10 times. When I acknowledge this error message and open Firefox again, it works with no errors seen. Now, I've seen this issue posted many times on these forums but none solve the issue or have an acceptable answer.
    - I do not have Firefox in my startup folder.
    - I cannot do a clean uninstall as I have a plethora of add-ons, extensions and settings.
    What causes this error and how can I fix it permanently?
    Thanks for reading.

    Note that the xpcom.dll file is no longer present in current Firefox versions, so you may have an extension or other software that needs to be updated for the current release.
    *Bug 852950 - Kill xpcom.dll/libxpcom.so/xpcom.dylib
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Error Code: -17004, Could not load DLL or library

    Hi All,
    I am getting the following error message:
    Error loading step 'x' of sequence 'MainSequence' in file 'y'.  Could not load DLL or external library C:\bin\driver.dll
    Error Code: -17004, Could not load DLL or library.
    Source 'TSAPI"
    My main DLL is one written in C in LabWindows.  This DLL calls a second DLL that was written in Visual C++
    I am using TestStand 2010 SP1 as well as CVI/LabWindows 2010.  I have WinXP Professioanl SP3.
    This same sequence, DLL1, and DLL2 have worked together in previous versions of TestStand!!!!  All I did was upgrade to Developer Suite 2011.......??????
    I have reviewed all the posts regarding this problem and have so far done the following:
    1.  Verified Both DLL1 and DLL2 reside in the same directory
    2.  Copied DLL2 into C:\Windows\system32
    3.  Used Dependency Walker to verify that there are no other missing DLL's
    4.  Unistalled Explorer 8 and installed Explorer 7 because of somthing I saw in depends and something I read while researching this problem.
    5.  Verified the Search Directories in TestStand
    I am wits end, as I cannot determine what the problem is and any suggestions would be welcome
    Solved!
    Go to Solution.

    So I did come up with a solution to this problem, but I don't understand why it solves the issue.  Hopefully some of you can provide some insight.
    So all my sequences were experiencing the problem described, and all sequences basically call the same dll's over and over.
    I have a dll that I use as my "main" dll.  All my sequences use this dll and I continually add more functions as our company designes new products, etc.  This dll uses functions that are from my CommDll.  The CommDll was written in C++, and it is also used in several other dll's that my sequence call's as I use it for all serial/telnet requirements. 
    So my test sequences for example calls the following dll's usually in this particular order ---
    DbDriver - This dll handles all the database functioanality for our products, and calls libMysql.dll
    PwrController.dll - this dll controls a pwrcontroller for all power on/power off, reboot, etc of our product.  This dll calls the CommDll.
    CompanyDll - This is the "main" dll that hadles all the cli commands and other test functions that our product requires.  This also calls CommDll.
    When the sequence calls are done in the order above, it does not work..  However, if I switch the sequence file to call the CompanyDll before the PwrController.dll everything works fine.  Is there an order of operations here????
    I also found that when I compiled my PwrController.dll with CVI 2010, it gave me an error could not load PwrController.dll no matter what order the seqence calls were, leading me to believe that I am missing something when building this particular dll.  As soon as I copy the original, developed and compiled in 2006, everything works again.
    Thanks,
    greggj

  • VDS didn't start: Could not load JDBC driver

    Hello,
    I want to start the VDS Tutorial, but I get an error:
    Exception: Data source 'Derby database' failed. Check your CLASSPATH! (in Tools
    -> Options) Could not load JDBC driver 'org.apache.derby.jdbc.EmbeddedDriver'
    Shutting down...
    Data source 'Derby database' failed. Check your CLASSPATH! (in Tools -> Options)
    Could not load JDBC driver 'org.apache.derby.jdbc.EmbeddedDriver'
    But I add the derby.jar file in the VDS under Tools - Options - Classpath
    Have you any ideas...?!

    I try to start the server without the tutorial and that works...

  • Visual Studio 2013 Code Analysis Exception CA0055: Could not load assembly

    I am trying to run the Code analysis on Web Project in VS2013 but i am getting the exception CA0055.
    I took a look at the log file. Here is the exception information which is getting logged.
    <Exception Keyword="CA0055" Kind="AssemblyLoad">
    <Type>Microsoft.FxCop.Common.AssemblyLoadException</Type>
    <ExceptionMessage>Could not load MyProject.dll.</ExceptionMessage>
    <InnerType>System.NullReferenceException</InnerType>
    <InnerExceptionMessage>Object reference not set to an instance of an object.</InnerExceptionMessage>
    <InnerStackTrace> at Phx.Metadata.ReaderImplementation.CreateTokenMap()
    at Phx.Metadata.MetadataLoader.GetModule(String fileName, FileInfo fileInfo, AssemblyUnit unit)
    at Phx.Metadata.MetadataLoader.GetAssembly(String fileName, AssemblyUnit unit)
    at Phx.Metadata.MetadataLoader.LoadAssemblyDefinition(AssemblyUnit unit)
    at Microsoft.FxCop.Engines.Phoenix.AssemblyLoader.ProcessWorklist(MetadataLoader metadataLoader, Boolean ignoreErrors)
    at Microsoft.FxCop.Engines.Phoenix.AssemblyLoader.LoadAttributeType(AggregateType type, MetadataLoader metadataLoader)
    at Microsoft.FxCop.Engines.Phoenix.AssemblyLoader.LoadAttributes(List`1 attributes, MetadataLoader metadataLoader)
    at Microsoft.FxCop.Engines.Phoenix.AssemblyLoader.LoadAttributes(ProgramUnit programUnit, MetadataLoader metadataLoader)
    at Microsoft.FxCop.Engines.Phoenix.AssemblyLoader.LoadAssembly(String filePath)
    at Microsoft.FxCop.Engines.Phoenix.PhoenixAnalysisEngine.AnalyzeInternal()
    </InnerStackTrace>
    </Exception>
    Nayan K

    Hi Nayan K,
    >>ExceptionMessage>Could not load MyProject.dll.</ExceptionMessage>
    <InnerType>System.NullReferenceException</InnerType>
    If you disable the code analyze tool, and then build your web project, could you get this error message?
    Generally this occurs if the file is not found or access to the file was denied.
    Reference:
    https://msdn.microsoft.com/en-us/library/ms244741(v=vs.90).aspx
    Please check your project folder, whether you could get this dll file? Or make sure that you add the correct references in your project.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Parser Error Message: Could not load file or assembly 'Microsoft.Office.Access.Server.UI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies,

    Dear All,
       I have installed Sharepoint Foundation 2010 in my server 2012 R2 machine. and I restore my existing content database backup into new site collections. and I'm trying to browse the site collection in window, the below error shown.. 
    Parser Error
    Message: Could not load file or assembly 'Microsoft.Office.Access.Server.UI, Version=14.0.0.0,
    Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies.
    <add assembly="Microsoft.Office.Access.Server.UI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
     I tried to checked the assembly folder having the DLL or not. but its
    not available in the C:\Windows\assembly location. and I'm tried to resolved this issue by HOTFIX. but unfortunately, I can't find out the patch file for MOSF 2010 in server 2012 r2.
    Please help me on this issue. I'm very new to sharepoint...
    Any help will be more appreciated.
    Thanks,
    Mubarak

    Hi Mubarak,
    Please firstly make sure you installed SharePoint Foundation 2010 with SP2 in a Windows Server 2012 R2. Since only SP2 slipstream installations are supported on Windows Server 2012 R2
    http://blogs.technet.com/b/stefan_gossner/archive/2014/05/03/sharepoint-2010-sp2-and-windows-server-2012-r2.aspx
    http://blogs.technet.com/b/stefan_gossner/archive/2013/09/19/slipstream-version-of-sharepoint-foundation-2010-with-sp2-included.aspx
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Could not load Logmanager "oracle.core.ojdl.logging.ODLLogManager" error while starting the Admin server

    Hi,
              I installed weblogic 12.1.2.0.0 with RHEL5.6.  After the installation, I tried to post the following class path in setDomainEnv.sh file under the domain home directory,
    POST_CLASSPATH="/prosun/jasper/jasperreports-3.6.0.jar:/prosun/jasper/commons-digester-1.7.jar:/prosun/jasper/log4j-1.2.15.jar:/prosun/jasper/org.apache.commons.beanutils_1.6.jar:/prosun/jasper/org.apache.commons.collections_3.1.jar:/prosun/jasper/org.apache.commons.logging_1.0.4.jar:/prosun/jasper/iText-2.1.0.jar:/prosun/jasper/groovy-all-1.5.5.jar"
    While i am  trying to start the Admin server, the server didn't started and following exception is reported in nohup.out file.  Please help me to resolve this issue.
    The above library jars are required for our applications.
    Could not load Logmanager "oracle.core.ojdl.logging.ODLLogManager"
    java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager
    java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager
    at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:356)       
    at java.security.AccessController.doPrivileged(Native Method)
    at java.util.logging.LogManager$1.run(LogManager.java:186)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
    at java.util.logging.LogManager.<clinit>(LogManager.java:176)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.util.logging.Logger.getAnonymousLogger(Logger.java:483)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
    at java.util.logging.Logger.getAnonymousLogger(Logger.java:452)
    at java.util.logging.LogManager$1.run(LogManager.java:186)
    at weblogic.kernel.KernelLogManager.createClientLogger(KernelLogManager.java:44)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.kernel.KernelLogManager.access$000(KernelLogManager.java:17)       
    at java.util.logging.LogManager.<clinit>(LogManager.java:176)
    at weblogic.kernel.KernelLogManager$LoggerMaker.<clinit>(KernelLogManager.java:20)
    at java.util.logging.Logger.getAnonymousLogger(Logger.java:483)
    at weblogic.kernel.KernelLogManager.getLogger(KernelLogManager.java:26)
    at java.util.logging.Logger.getAnonymousLogger(Logger.java:452)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at weblogic.kernel.KernelLogManager.createClientLogger(KernelLogManager.java:44)       
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
    at weblogic.kernel.KernelLogManager.access$000(KernelLogManager.java:17)       
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at weblogic.kernel.KernelLogManager$LoggerMaker.<clinit>(KernelLogManager.java:20)     
    at java.lang.reflect.Method.invoke(Method.java:601)
    at weblogic.kernel.KernelLogManager.getLogger(KernelLogManager.java:26)
    at weblogic.logging.MessageLogger.log(MessageLogger.java:96)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) 
    at weblogic.logging.MessageLogger.log(MessageLogger.java:111)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
    at weblogic.logging.WLMessageLogger.log(WLMessageLogger.java:52)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)       
    at weblogic.security.SecurityLogger.logDisallowingCryptoJDefaultJCEVerification(SecurityLogger.java:13444)
    at java.lang.reflect.Method.invoke(Method.java:601)
    at weblogic.security.utils.SecurityUtils.turnOffCryptoJDefaultJCEVerification(SecurityUtils.java:81)   
    at weblogic.logging.MessageLogger.log(MessageLogger.java:96)
    at weblogic.Server.main(Server.java:70)at weblogic.logging.MessageLogger.log(MessageLogger.java:111)
    at weblogic.logging.WLMessageLogger.log(WLMessageLogger.java:52)
    Could not load Logmanager "oracle.core.ojdl.logging.ODLLogManager"
    java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager
    at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
    at java.util.logging.LogManager$1.run(LogManager.java:186)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.util.logging.LogManager.<clinit>(LogManager.java:176)
    at java.util.logging.Logger.getAnonymousLogger(Logger.java:483)
    at java.util.logging.Logger.getAnonymousLogger(Logger.java:452)
    at weblogic.kernel.KernelLogManager.createClientLogger(KernelLogManager.java:44)
    at weblogic.kernel.KernelLogManager.access$000(KernelLogManager.java:17)
    at weblogic.kernel.KernelLogManager$LoggerMaker.<clinit>(KernelLogManager.java:20)
    at weblogic.kernel.KernelLogManager.getLogger(KernelLogManager.java:26)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
    Regards,
    Anand Krishnan

    hi, you should not do nothing with user root.
    please, don't use root again for weblogic administration.
    list all files with root permissions:
    move to Middleware Home, example: cd /u01/app/oracle/Middleware
    find . -user root
    if there are files with root permissions, change it to oracle:oinstall
    I saw this:
    Could not load Logmanager "oracle.core.ojdl.logging.ODLLogManager"
    java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager
    Please check in DOMAIN_HOME/bin/setDomainEnv.sh file if exist this:
    JAVA_OPTIONS="-Djava.util.logging.manager=oracle.core.ojdl.logging.ODLLogManager ${JAVA_OPTIONS}"
    export JAVA_OPTIONS
    MWCONFIG_CLASSPATH=${FMWCONFIG_CLASSPATH}${CLASSPATHSEP}${COMMON_COMPONENTS_HOME}/modules/oracle.odl_11.1.1/ojdl.jar
    export FMWCONFIG_CLASSPATH
    if exist, replace for:
    JAVA_OPTIONS="${JAVA_OPTIONS}"
    export JAVA_OPTIONS
    if not existe, its necesary for you to use /prosun/jasper/org.apache.commons.logging_1.0.4.jar in your classpath?. If it isn't necesary delete it, and restart the AdminServer.

  • Could not load file or assembly 'Oracle.DataAccess error on server

    I have been building a.NET application on my local Machine Windows 7 and have the 32-bit ODT installed on my machine which works nicely with VS 2010.
    I placed it on the server and when I open the page that accesses data from Oracle, I get the below error. Both the server and my local computer have the Oracle.DataAccess
    dll installed and both have the same public token 89b483f429c47342. I changed the target CPU from Any CPU to x86 and published a Release build of my project to the server.
    Why am I getting the below error?
    ==========================================================================================================
    Could not load file or assembly 'Oracle.DataAccess, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'Oracle.DataAccess, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
    Stack Trace:
    [FileNotFoundException: Could not load file or assembly 'Oracle.DataAccess, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.]
    antac.dashboard.Page_Load(Object sender, EventArgs e) in C:\Users\George\Documents\Visual Studio 2010\Projects\antac\antac\dashboard.aspx.cs:92
    System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +25
    System.Web.UI.Control.LoadRecursive() +71
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3048
    Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1

    This was definitely the right answer, I thought ODAC was already installed on the server, but apparently not. I installed the 64-bit OCAC XCopy version on the server and now it works.

  • 'Could not load file or assembly ...TemplateEngine' Error Msg on Server

    I'm working with the sample application VB_Web_CRVObjMod_FilteringData which works fine locally using the ASP.net Website admin tool
    After publishing to our server, it came up with the error...
    'Could not load file or assembly 'CrystalDecisions.Web, Version=12.0.2000.0...'
    where I installed 'CRRuntime_12_0_mlb.msi' on the server
    Now when I attempt to open the default.aspx, I'm getting this error...
    Could not load file or assembly 'CrystalDecisions.CrystalReports.TemplateEngine, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
    Should the CRRuntime_12_0_mlb.msi install all the necessary assemblies?
    The actual path of the .dll's on the development pc is
    C:\Program Files\Common Files\Business Objects\3.0
    while on the server it's
    C:\Program Files\Common Files\Business Objects\2.7
    Listed in the Add or Remove Programs on the Server
    Crystal Reports 2008 Runtime
    Crystal Reports for .NET framework 2.0 (x86)
    Server Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
    Microsoft Visual Studio 2005
    Version 8.0.50727.42 (RTM.050727-4200)
    Microsoft .NET Framework
    Version 2.0.50727 SP1
    Installed Edition: Standard
    Crystal Reports 2008
    CR Developer
    Version 12.0.0.683
    Product Type: Evaluation
    I also have Crystal Reports XI on the development pc
    CR Professional
    11.0.0.2495

    My development pc has this directory for CR 2008
    C:\Program Files\Business Objects\2008\BusinessObjects Enterprise 12.0\win32_x86
    The \2008\ directory is my doing to prevent the 2008 install from overwriting the XI install. Was this a bad idea?
    - Absolutely the worst idea I could think of. Crystal reports is side by side compliant since version 9. You do not need to, should not do any modifications at all. I have no idea what this has done to the system or even how this works as is...
    On the development pc
    Sort C:\WINDOWS\assembly by Version,
    I can find CrystalDecisions.CrystalReports.Template Engine 12.0.1100.0
    version 11.0.3300.0 also exists
    On the server in C:\windows\assembly
    CrystalDecisions.CrystalReports.Template Engine is not found
    Other CrystalDecisions... assemblies version 12.0.1100.0 are present
    In the original post you mention that you are using .NET 2005. Yet, you only see CR assemblies of version 12.0.1100. These assemblies can not be used in .NET 2005. The really confusing part is that the error is telling me the app is looking for assemblies of version 12.0.2000.
    Look in the .NET project for the CR assemblies. What version of the assemblies are you referencing?
    Ludek

  • Could not load application module 'oracle.apps.pos.supplier.server.SuppSumm

    hi
    when i create supplier in AP Super user,the supplier entry page got error:
    Could not load application module 'oracle.apps.pos.supplier.server.SuppSummAM',is there anyboay could help me? thanks a lot!
    metalink's solution is:
    -- To implement the solution, please execute the following steps::
    1. Using System Administrator Responsibility.
    2. Navigate to Profiles > System.
    3. Query for the Responsibility used and for Profile: MO: Operating Unit.
    4. Kindly check the value attached to the security profile: MO: Operating Unit.
    5. If security profile is not set, attach a value to it.
    6. Delete the Browser and Apache Cache. Restart the Apache.
    7. Re-test the issue again.
    but it didn't work!

    Did you ever figure this out? I'm encountering the same issue.
    Thanks.

Maybe you are looking for