Could not load the bigger Tiles module

Since i upgrade to Lion, Photoshop CS5 says it couldn't load the Bigger Tiles Module (?) because they don/t work with photoshop.
OK, I may delete them... but where are they ?

What you've most likely done is to copy plug-ins supplied by Adobe with an earlier version of Photoshop into your current Photoshop installation area, overwriting files provided with Photoshop CS5.
If you can run Photoshop at all, make sure you save any customizations, such as brushes, actions, etc. that you have created first, before removing the application and deleting files.
Then you're pretty much going to have to uninstall Photoshop, clear out any remnant folders, then reinstall it. The files you overwrote can really only be recovered that way.
There's a creative suite cleaner tool here:
http://www.adobe.com/support/contact/cscleanertool.html
Make sure before you reinstall that you look on your hard drive for any remnant files in the Photoshop installation area and remove them.
After you get Photoshop reinstalled, to get all the plug-ins you need into it, do NOT copy whole sets of files from some old Photoshop folder. Instead seek out versions of each plug-in that are compatible with the version of Photoshop you have and reinstall them properly. For any 3rd party plug-ins for which you must copy files to install, make your own subfolder in the Plug-ins folder and copy just those 3rd party plug-ins there.
There is no quick shortcut to doing this right.
-Noel

Similar Messages

Could not load the Bigger Tiles Modules

I use Photoshop CS5 on iMac 3.06GHz IC2D with Lion 10.7.2. When I start Photoshop a Popup says : Could not load the Bigger Tiles Modules because it does not work with this version of Photoshop. Pity, but how to disable this Popup at every start ?

Sure... I hope this helps and this is what you mean. It is the case that I installed it fresh on a new machine, but maybe I checked a wrong box along the way. I certainly have no reason to deny installing it any other way. Regardless, it was only a slight annoyance and such an easy fix.
Adobe Photoshop Version: 14.1.1 (14.1.1 20130910.r.414 2013/09/10:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:13, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 6
Logical processor count: 12
Processor speed: 4374 MHz
Built-in memory: 32710 MB
Free memory: 28757 MB
Memory available to Photoshop: 29685 MB
Memory used by Photoshop: 60 %
Image tile size: 1024K
Image cache levels: 4
Display: 1
Display Bounds: top=0, left=0, bottom=1200, right=1920
Display: 2
Display Bounds: top=0, left=1920, bottom=1200, right=3840
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=3072
gpu[0].RectTextureSize=16384
gpu[0].Renderer="Quadro K4000/PCIe/SSE2"
gpu[0].RendererID=4602
gpu[0].Vendor="NVIDIA Corporation"
gpu[0].VendorID=4318
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="9.18.13.2049"
gpu[0].Driver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
gpu[0].DriverDate="20130621000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLSupported=1
gpu[0].OCLVersion="1.1"
gpu[0].CUDASupported=1
gpu[0].CUDAVersion="4.2.1"
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 NVIDIA via Cg compiler"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[65536]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[2048]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
Serial number: 90970468542907043447
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
Temporary file path: C:\Users\Amighty\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 223.2G, 140.5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
Installed components:
   ACE.dll   ACE 2013/07/14-12:09:50   79.543790   79.543790
   adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
   AdobeLinguistic.dll   Adobe Linguisitc Library   7.0.0
   AdobeOwl.dll   Adobe Owl 2013/03/03-12:10:08   5.0.13   79.533484
   AdobePDFL.dll   PDFL 2013/03/13-12:09:15   79.499517   79.499517
   AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1786
   AdobeXMP.dll   Adobe XMP Core 2013/03/13-12:09:15   79.151481   79.151481
   AdobeXMPFiles.dll   Adobe XMP Files 2013/03/13-12:09:15   79.151481   79.151481
   AdobeXMPScript.dll   Adobe XMP Script 2013/03/13-12:09:15   79.151481   79.151481
   adobe_caps.dll   Adobe CAPS   7,0,0,21
   AGM.dll   AGM 2013/07/14-12:09:50   79.543790   79.543790
   ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31
   aif_core.dll   AIF   5.0   79.534508
   aif_ocl.dll   AIF   5.0   79.534508
   aif_ogl.dll   AIF   5.0   79.534508
   amtlib.dll   AMTLib (64 Bit)   7.0.0.169 BuildVersion: 7.0; BuildDate: Mon Apr 8 2013 2:31:50)   1.000000
   ARE.dll   ARE 2013/07/14-12:09:50   79.543790   79.543790
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2013/07/14-12:09:50   79.543790   79.543790
   BIBUtils.dll   BIBUtils 2013/07/14-12:09:50   79.543790   79.543790
   boost_date_time.dll   DVA Product   7.0.0
   boost_signals.dll   DVA Product   7.0.0
   boost_system.dll   DVA Product   7.0.0
   boost_threads.dll   DVA Product   7.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.1.6.30929   2.1.6.30929
   CITThreading.dll   Adobe CITThreading   2.1.6.30929   2.1.6.30929
   CoolType.dll   CoolType 2013/07/14-12:09:50   79.543790   79.543790
   dvaaudiodevice.dll   DVA Product   7.0.0
   dvacore.dll   DVA Product   7.0.0
   dvamarshal.dll   DVA Product   7.0.0
   dvamediatypes.dll   DVA Product   7.0.0
   dvaplayer.dll   DVA Product   7.0.0
   dvatransport.dll   DVA Product   7.0.0
   dvaunittesting.dll   DVA Product   7.0.0
   dynamiclink.dll   DVA Product   7.0.0
   ExtendScript.dll   ExtendScript 2013/03/21-12:10:31   79.535742   79.535742
   FileInfo.dll   Adobe XMP FileInfo 2013/03/19-12:09:02   79.151561   79.151561
   filter_graph.dll   AIF   5.0   79.534508
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   imslib.dll   IMSLib DLL   7.0.0.116
   JP2KLib.dll   JP2KLib 2013/02/19-12:28:44   79.248139   79.248139
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libiomp5md.dll   Intel(R) OMP Runtime Library   5.0
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   LogSession.dll   LogSession   2.1.2.1785
   mediacoreif.dll   DVA Product   7.0.0
   MPS.dll   MPS 2013/03/15-13:25:52   79.535029   79.535029
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   PatchMatch.dll   PatchMatch 2013/06/11-12:08:08   79.542390   79.542390
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CC   CC
   Plugin.dll   Adobe Photoshop CC   CC
   PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)   4.0.1.34
   PSArt.dll   Adobe Photoshop CC   CC
   PSViews.dll   Adobe Photoshop CC   CC
   SCCore.dll   ScCore 2013/03/21-12:10:31   79.535742   79.535742
   ScriptUIFlex.dll   ScriptUIFlex 2013/03/21-12:10:31   79.535742   79.535742
   svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003
   updaternotifications.dll   Adobe Updater Notifications Library   7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   7.0.1.102
   WRServices.dll   WRServices Mon Feb 25 2013 16:09:10   Build 0.19078   0.19078
Required plug-ins:
   3D Studio 14.1.1 (14.1.1 x001)
   Accented Edges 14.1.1
   Adaptive Wide Angle 14.1.1
   Angled Strokes 14.1.1
   Average 14.1.1 (14.1.1 x001)
   Bas Relief 14.1.1
   BMP 14.1.1
   Camera Raw 8.2
   Camera Raw Filter 8.2
   Chalk & Charcoal 14.1.1
   Charcoal 14.1.1
   Chrome 14.1.1
   Cineon 14.1.1 (14.1.1 x001)
   Clouds 14.1.1 (14.1.1 x001)
   Collada 14.1.1 (14.1.1 x001)
   Color Halftone 14.1.1
   Colored Pencil 14.1.1
   CompuServe GIF 14.1.1
   Conté Crayon 14.1.1
   Craquelure 14.1.1
   Crop and Straighten Photos 14.1.1 (14.1.1 x001)
   Crop and Straighten Photos Filter 14.1.1
   Crosshatch 14.1.1
   Crystallize 14.1.1
   Cutout 14.1.1
   Dark Strokes 14.1.1
   De-Interlace 14.1.1
   Dicom 14.1.1
   Difference Clouds 14.1.1 (14.1.1 x001)
   Diffuse Glow 14.1.1
   Displace 14.1.1
   Dry Brush 14.1.1
   Eazel Acquire 14.1.1 (14.1.1 x001)
   Embed Watermark 4.0
   Entropy 14.1.1 (14.1.1 x001)
   Extrude 14.1.1
   FastCore Routines 14.1.1 (14.1.1 x001)
   Fibers 14.1.1
   Film Grain 14.1.1
   Filter Gallery 14.1.1
   Flash 3D 14.1.1 (14.1.1 x001)
   Fresco 14.1.1
   Glass 14.1.1
   Glowing Edges 14.1.1
   Google Earth 4 14.1.1 (14.1.1 x001)
   Grain 14.1.1
   Graphic Pen 14.1.1
   Halftone Pattern 14.1.1
   HDRMergeUI 14.1.1
   IFF Format 14.1.1
   Ink Outlines 14.1.1
   JPEG 2000 14.1.1
   Kurtosis 14.1.1 (14.1.1 x001)
   Lens Blur 14.1.1
   Lens Correction 14.1.1
   Lens Flare 14.1.1
   Liquify 14.1.1
   Matlab Operation 14.1.1 (14.1.1 x001)
   Maximum 14.1.1 (14.1.1 x001)
   Mean 14.1.1 (14.1.1 x001)
   Measurement Core 14.1.1 (14.1.1 x001)
   Median 14.1.1 (14.1.1 x001)
   Mezzotint 14.1.1
   Minimum 14.1.1 (14.1.1 x001)
   MMXCore Routines 14.1.1 (14.1.1 x001)
   Mosaic Tiles 14.1.1
   Multiprocessor Support 14.1.1 (14.1.1 x001)
   Neon Glow 14.1.1
   Note Paper 14.1.1
   NTSC Colors 14.1.1 (14.1.1 x001)
   Ocean Ripple 14.1.1
   Oil Paint 14.1.1
   OpenEXR 14.1.1
   Paint Daubs 14.1.1
   Palette Knife 14.1.1
   Patchwork 14.1.1
   Paths to Illustrator 14.1.1
   PCX 14.1.1 (14.1.1 x001)
   Photocopy 14.1.1
   Photoshop 3D Engine 14.1.1 (14.1.1 x001)
   Photoshop Touch 14.0
   Picture Package Filter 14.1.1 (14.1.1 x001)
   Pinch 14.1.1
   Pixar 14.1.1 (14.1.1 x001)
   Plaster 14.1.1
   Plastic Wrap 14.1.1
   PNG 14.1.1
   Pointillize 14.1.1
   Polar Coordinates 14.1.1
   Portable Bit Map 14.1.1 (14.1.1 x001)
   Poster Edges 14.1.1
   Radial Blur 14.1.1
   Radiance 14.1.1 (14.1.1 x001)
   Range 14.1.1 (14.1.1 x001)
   Read Watermark 4.0
   Reticulation 14.1.1
   Ripple 14.1.1
   Rough Pastels 14.1.1
   Save for Web 14.1.1
   ScriptingSupport 14.1.1
   Shake Reduction 14.1.1
   Shear 14.1.1
   Skewness 14.1.1 (14.1.1 x001)
   Smart Blur 14.1.1
   Smudge Stick 14.1.1
   Solarize 14.1.1 (14.1.1 x001)
   Spatter 14.1.1
   Spherize 14.1.1
   Sponge 14.1.1
   Sprayed Strokes 14.1.1
   Stained Glass 14.1.1
   Stamp 14.1.1
   Standard Deviation 14.1.1 (14.1.1 x001)
   STL 14.1.1 (14.1.1 x001)
   Sumi-e 14.1.1
   Summation 14.1.1 (14.1.1 x001)
   Targa 14.1.1
   Texturizer 14.1.1
   Tiles 14.1.1
   Torn Edges 14.1.1
   Twirl 14.1.1
   Underpainting 14.1.1
   Vanishing Point 14.1.1
   Variance 14.1.1 (14.1.1 x001)
   Variations 14.1.1 (14.1.1 x001)
   Water Paper 14.1.1
   Watercolor 14.1.1
   Wave 14.1.1
   Wavefront|OBJ 14.1.1 (14.1.1 x001)
   WIA Support 14.1.1 (14.1.1 x001)
   Wind 14.1.1
   Wireless Bitmap 14.1.1 (14.1.1 x001)
   ZigZag 14.1.1
Optional and third party plug-ins:
   Alias PIX 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
   ElectricImage 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
   HSB/HSL 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
   JPEG 2000 2.0
   SGI RGB 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
   SoftImage 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
   Texture Fill 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
   Wavefront RLA 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Plug-ins that failed to load: NONE
Flash:
   Extensis
   Adobe Exchange
   Kuler
Installed TWAIN devices: NONE

PE 5.0.2 - Could not load the FastCore Routines module because the file could not be found.

The "view and organize photos" mode seems to work just fine, but when I attempt to open the "edit and enhance photos" mode, I get an error box with this message: "Could not load the FastCore Routines module because the file could not be found", and then it shuts down after I click ok. I have installed the 5.0.2 patch and have uninstalled and reinstalled the program, to no avail. I had no firewall running when installing the program, nor do I own the program "Clean Sweep". What can I do?
Thanks for any help
OS = Windows Vista.

CANNOT LOAD FASTCORE ROUTINES, MMX CORE ROUTINES,
           MULTIPROCESSOR SUPPORT NOT FOUND
          SUCCESSFULLY REPAIRED - STEP BY STEP
I made the repair for Elements 5 on an XP version Operating System PC by doing this:
I went to....
Start / All Programs / Accessories / Windows Explorer
and selected.....
My Computer / C:
which is my drive with its operating system where Photoshop is installed.
I then clicked....
Documents and Settings
Then - in each - of the three icons I found.....
All Users, Default User, and Owner
I went into....
Application Data / Adobe / Photoshop Elements
In that last file I removed ALL the contents.... IN EACH !
After rebooting, my Photoshop Elements 5 started to work.
I think with research and all I invested five hours. May this save you 4 1/2.
I was paranoid and put the contents of each file into a new file I identified
clearly in case it I have to replace one of the parts out in the future.
I hope this is of help to some future reader.
Other comments here seem to indicate that this solution has
worked in version 4 and up and fixed early versions of Vista.
This appears to be a common problem after a drive repair or partitioning.
Why they can't just tell us this is a mystery to me.
-- Bon Courage! --
                                  Ken

Could not load the Multiprocessor Support module because it wont work with

Here is a strange error message, there are actually 2.
But they arent making PSE 8 unusable, just very annoying.
Here is the first one,,,,,,,,,
"Could not load the Multiprocessor Support module because it wont work with this version of photoshop."
When I open PSE 8, on my new Intel Mac, I get this message and nobody seems to know what the problem is.
My new Mac has 2 processors? Could that be what the message is saying?
But when I click the error message away, PSE 8 works fine.
There is another one too,
"Could not load the FastCore Routines module because it doest not work with this version of photoshop."
I just click it away and no problem, just a pita.
So if they dont effect it, I shouldnt worry, but my classmates are concerned.
Do you here have any idea what it is, and how to get rid of it?
There is info on the web about it, but no solutions.
Thank you,
Jane

This is interessting, as does my new Mac have 2 processors or 2 cores? I havent come across how this works yet, nor how to find it on my Mac.
Yes, I just found a site which explains it well,
http://macperformanceguide.com/Optimizing-Cores.html
I have one processor with 2 cores.
And the equivalent of the Task Manager is the Activity Monitor, where I see only one processor.
You sure explained this well! I now think we can find the problem, though its not effecting either my PS or PSE, its just an annoying message that I have to click away.
http://kb2.adobe.com/cps/407/kb407809.html
Is what Adobe tells us, this is for Windows, but it could apply to Macs?
I have tons of third party plug ins, and this problem is within the last month, and I didnt see the error messages before. Thats confusing, as I would have thought it would have shown up right from the start.
I just moved some of my plug ins, lets see if this changes anything, nope, but only one message appeared this time.
This will be fun to see what the real answer is! As I find out more, I will add it here.
Thank you,
Jane

Could not load the mmxcore routines module because it does not work with this version of photoshop?

I'm getting the above message when starting Photoshop CC 2014. Click OK & it loads fine but just a little annoying. Seems to have happened since the Aug 5 update. Photoshop shows as version 14.0.0 release although CC App shows it as up to date. Should it not be version 14.1 ?

According to Adobe - see here: Adobe Photoshop CC new features | Buy Photoshop CC 'Photoshop CC 14.2' was released on Jan 15th 2014 but the latest version released on 5 August 2014 is 'Photoshop CC (2014.1)'
As far as I'm aware, after 14.2 , releases were name '2014 release' so the 2014.1 release is indeed the latest version - there have been two updates since 14.2.1
However, this still doesn't explain why mine has shows as 14.0.0 and 'up to date' Anyone know how I can get it to update to the latest version??

CS6 photoshop message 'could not load the fast core routines module because the file was not found'

my CS6 photoshop is giving me the message 'could not load the fast core routines module because the file was not found'. this started happening after i used a trial of photoshop CC and decided not to stay with it. my photoshop is part of my CS6 suite and i am only getting this message with photoshop, my ilustrator keeps working just fine..... does anyone know how to fix it? thanks.

I did a search on my system and found the Photoshop has a fastcore plug-in. Creative Cloud includes a subscription version of CS6 version 13.1.2. I do not know if you installed that or not. The cc un-install may have done something. You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop CS6 version 13.0.6 Mac or Photoshop CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 If you need to download the CS6 installer Download CS6 products.
You may also be able to recover your cs6 using an old system backup
fastcore.8bx on my system...

When attempting launch of photoshopcc,I get a box with "could not load the MMX core routines module because it does not work with this version of PS... what does this mean and how do I correct it?

when attempting launch of photoshopcc,I get a box with "could not load the MMX core routines module because it does not work with this version of PS... what does this mean and how do I correct it?

I did a search on my system and found the Photoshop has a fastcore plug-in. Creative Cloud includes a subscription version of CS6 version 13.1.2. I do not know if you installed that or not. The cc un-install may have done something. You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop CS6 version 13.0.6 Mac or Photoshop CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 If you need to download the CS6 installer Download CS6 products.
You may also be able to recover your cs6 using an old system backup
fastcore.8bx on my system...

Web Logic 10.3.6 (64bit) - Could not load the sitemesh filter and library

Installed Web Logic 10.3.3 (32bit) and Java JDK 1.6.0_21 (32bit) in a customer's server (Windows Server 2008 R2 and 64-bit Operating System). The web page can be displayed with header and side menu.
However installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) on that same server. The web page cannot be displayed with header and side menu, it is just displayed with a blank background. Refer to the below "ERROR LOG", found the application could not load the sitemesh filter and library properly. We are using sitemesh-2.3.jar.
Have tried installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) in a test server (Windows Server 2008 R2 and 64-bit Operating System). The web page can be displayed with header and side menu.
Please assist on this issue. Thanks.
Below is the sitemesh that is declared and configured.
WEB-INF/web.xml
<filter>
<filter-name>sitemesh</filter-name>
<filter-class>com.opensymphony.module.sitemesh.filter.PageFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>sitemesh</filter-name>
<url-pattern>/*</url-pattern>
<dispatcher>REQUEST</dispatcher>
<dispatcher>FORWARD</dispatcher>
<dispatcher>INCLUDE</dispatcher>
</filter-mapping>
WEB-INF/decorators.xml
<decorators defaultdir="/template/decorators">
<decorator name="plain" page="plain.jsp"/>
<decorator name="printable" page="printable.jsp"/>
<decorator name="standard" page="page_template_std.jsp">
<pattern>/*.jsp</pattern>
</decorator>
<excludes>
<pattern>/include/*</pattern>
<pattern>/js/*</pattern>
<pattern>/Login.jsp*</pattern>
</excludes>
</decorators>
WEB-INF/sitemesh.xml
<sitemesh>
<property name="decorators-file" value="/WEB-INF/decorators.xml"/>
<excludes file="${decorators-file}"/>
<page-parsers>
<parser content-type="text/html"
class="com.opensymphony.module.sitemesh.parser.HTMLPageParser" />
<parser content-type="text/html;charset=ISO-8859-1"
class="com.opensymphony.module.sitemesh.parser.HTMLPageParser" />
</page-parsers>
<decorator-mappers>
     <mapper class="com.opensymphony.module.sitemesh.mapper.PageDecoratorMapper">
          <param name="property.1" value="meta.decorator" />
          <param name="property.2" value="decorator" />
     </mapper>
     <mapper class="com.opensymphony.module.sitemesh.mapper.FrameSetDecoratorMapper">
     </mapper>
     <mapper class="com.opensymphony.module.sitemesh.mapper.AgentDecoratorMapper">
          <param name="match.MSIE" value="ie" />
          <param name="match.Mozilla [" value="ns" />
          <param name="match.Opera" value="opera" />
          <param name="match.Lynx" value="lynx" />
     </mapper>
     <mapper class="com.opensymphony.module.sitemesh.mapper.PrintableDecoratorMapper">
          <param name="decorator" value="printable" />
          <param name="parameter.name" value="printable" />
          <param name="parameter.value" value="true" />
     </mapper>
     <mapper class="com.opensymphony.module.sitemesh.mapper.RobotDecoratorMapper">
          <param name="decorator" value="robot" />
     </mapper>
     <mapper class="com.opensymphony.module.sitemesh.mapper.ParameterDecoratorMapper">
          <param name="decorator.parameter" value="decorator" />
     </mapper>
     <mapper class="com.opensymphony.module.sitemesh.mapper.FileDecoratorMapper">
     </mapper>
     <mapper class="com.opensymphony.module.sitemesh.mapper.ConfigDecoratorMapper">
          <param name="config" value="/WEB-INF/decorators.xml" />
     </mapper>
</decorator-mappers>
</sitemesh>
ERROR LOG
####<May 8, 2012 5:38:49 PM SGT> <Error> <HTTP> <BHQKPK10060> <cms_cimbmy> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1336469929804> <BEA-101165> <Could not load user defined filter in web.xml: com.opensymphony.module.sitemesh.filter.PageFilter.
com.opensymphony.module.sitemesh.factory.FactoryException: Cannot construct Factory : com.opensymphony.module.sitemesh.factory.DefaultFactory: java.lang.reflect.InvocationTargetException
     at com.opensymphony.module.sitemesh.Factory.getInstance(Factory.java:50)
     at com.opensymphony.module.sitemesh.filter.PageFilter.init(PageFilter.java:87)
     at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
     at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

Do you see any further nested exceptions OR errors in the log file.
Considering that the same WLS-JDK combination works on one machine and does not work on another machine, it indicates an environmental issue.
"However installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) on that same server. The web page cannot be displayed....
Have tried installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) in a test server (Windows Server 2008 R2 and 64-bit Operating System). The web page can be displayed with header and side menu."
I am suspecting if it has to do anything with the native libraries being loaded JAVA_LIB_PATH.
Please review the server log file again for identifying differences in LIB_PATH or PATH or any messages saying "Unable to load native.. performance pack.."
Arun

Admin tool could not load the essbase driver.Please check the configuration

Hi All,
I have obiee11g installed machine and want to connect that machine with essbase.
For that I have installed Essbase Client [11.1.2.1] by downloading the following files,
*1>Oracle Hyperion Enterprise Performance Management System Installer Fusion Edition Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
*2>Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0 for Microsoft Windows (32-bit) Part 1 of 4*
*3>Oracle Essbase Clients Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
After that I manually added the ESSBASEPATH and ARBORPATH as Environment Variables (USER).
And also I manually added the essbasepath in bi-init.cmd file.
Finally I tried to connect essbase with BI through BI Admin Tool, I get the following Error
"*Admin tool could not load the essbase driver.Please check the configuration*."
kindly guide me to overcome this issue.
Thanks and Regards
sai
Edited by: 923924 on Apr 24, 2012 5:20 AM

Until you perform the configuration on the AD server, the following message will appear:
Error: Could not start the SSO service. Please check the configuration.
So configure the AD server so that the error message will not appear again.

On mac yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014)

Need help-
On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????

Thank you station_two but I did install them in my
applications>adobe>presets>brushes and still I get this error message......
On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]>

SQL Server 2012 Express - Could not load the file or assembly 'Microsoft.VisualStudio.OLE.Interop

Windows 7 Home Premium, SP1
64-bit
I just installed SQL Server 2012 express - Express with Advanced Services (contains the database engine, Express Tools, Reporting Services, and Full Text Search),
file name - SQLEXPRADV_x64_ENU.
Opening SQL Server Management Studio causes the error -
"Could not load the file or assembly 'Microsoft.VisualStudio.OLE.Interop,
Version=7.1.40304.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The
system cannot find the file specified."
Do I need to install another file? Did I download the wrong version?
Any suggestions? Thanks for any help.

Hello,
The issue may occure when the installation of your SQL Server is not a complete or a successful one. Did you try to repair or reinstall the SQL Server Express? You can also try to install
Service Pack 1 for SQL Server 2012
to check if the issue presists.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Server could not load the class

I m trying to create a new adapter task bt when i select xliACE.jar from the dropdown box, its trowing an error " Server could not load the class"
Below is the server log--
ERROR,04 Dec 2007 09:18:48,217,[XELLERATE.JAVACLIENT],Class/Method: tcADPClient/introspect encounter some problems : RemoteException occurred in server thread; nested exception is:
java.rmi.ServerError: Unexpected Error; nested exception is:
java.lang.UnsatisfiedLinkError: no ACEUser in java.library.path
java.rmi.ServerException: RemoteException occurred in server thread; nested exce
ption is:
Could any one provide some help
Thanks

Should compile java code with the same jdk as being used by OIM

I have been using Adobe Photoshop since 1998. I recently replaced my computer and placed the Adobe Photoshop 5.0 CD in to install, and found that could not load the software, and referred me to Adobe. What should I do?

I have been using Adobe Photoshop since 1998. I recently replaced my computer and placed the Adobe Photoshop 5.0 CD in to install, and found that could not load the software, and referred me to Adobe. What should I do?

According to this forum post from the time of the shutdown, it is only those directly affected.
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products
Here is a list from that link
If your software is affected by the activation server shut down then you will receive an error that the Activation server is unavailable. The specific affected products are as follows:
Acrobat 7.0 - Windows
After Effects 7.0
Audition 3.0
Captivate 1.0
Contribute 2.0
Contribute 3.0
Creative Suite 2.0
Director MX 2004
Dreamweaver MX 2004
Fireworks MX 2004
Flash Paper 2.0
Freehand MX
GoLive CS2
GoLive 9.0
Illustrator CS2
InCopy CS2
InDesign CS2
Macromedia Studo MX 2004
Photoshop CS
Photoshop CS2
Photoshop Elements 4.0
Photoshop Elements 5.0
Premiere Pro 7.0
Production Studio Premium

MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe" - Deploying from Linux

Hi there, I'm facing the following error when deploying node.js application to azure websites. I have read enough articles which points me to install visual studio. I'm on a linux desktop and i'd like to use the git to deploy website. I tried changing to
.NET 3.5/4.5 in the config but no help there. I've enabled python 2.7 aswell I have added the following to the query string to the handler_mappings in the portal but it isn't working. How do i go about fixing the same?
PATH C:\Program Files\Microsoft Visual Studio 9.0\VC\vcpackages
remote: Using start-up script server.js from package.json.remote: Generated web.config.remote: The package.json file does not specify node.js engine version constraints.remote: The node.js application will run with the default node.js version 0.12.0.remote: ..................................remote: remote: > [email protected] install D:\home\site\wwwroot\node_modules\mariasqlremote: > node-gyp rebuildremote: remote: remote: child_process: customFds option is deprecated, use stdio instead.remote: D:\home\site\wwwroot\node_modules\mariasql>node "c:\Program Files (x86)\npm\2.5.1\node_modules\npm\bin\node-gyp-bin\\..\..\node_modules\node-gyp\bin\node-gyp.js" rebuild remote: Building the projects in this solution one at a time. To enable parallel build, please add the "/m" switch.remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! build error remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! stack Error: `msbuild` failed with exit code: 1remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! stack at ChildProcess.onExit (c:\Program Files (x86)\npm\2.5.1\node_modules\npm\node_modules\node-gyp\lib\build.js:267:23)remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! stack at ChildProcess.emit (events.js:110:17)remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:1067:12)remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! System Windows_NT 6.2.9200remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! command "node" "c:\\Program Files (x86)\\npm\\2.5.1\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"remote: gyp ERR! cwd D:\home\site\wwwroot\node_modules\mariasqlremote: gyp ERR! node -v v0.12.0remote: gyp ERR! node-gyp -v v1.0.2remote: gyp ERR! not ok remote: npm ERR! Windows_NT 6.2.9200remote: npm ERR! argv "D:\\Program Files (x86)\\nodejs\\0.12.0\\node.exe" "D:\\Program Files (x86)\\npm\\2.5.1\\node_modules\\npm\\bin\\npm-cli.js" "install" "--production"remote: npm ERR! node v0.12.0remote: npm ERR! npm v2.5.1remote: npm ERR! code ELIFECYCLEremote: remote: npm ERR! [email protected] install: `node-gyp rebuild`remote: npm ERR! Exit status 1remote: npm ERR! remote: npm ERR! Failed at the [email protected] install script 'node-gyp rebuild'.remote: npm ERR! This is most likely a problem with the mariasql package,remote: npm ERR! not with npm itself.remote: npm ERR! Tell the author that this fails on your system:remote: npm ERR! node-gyp rebuildremote: npm ERR! You can get their info via:remote: npm ERR! npm owner ls mariasqlremote: npm ERR! There is likely additional logging output above.remote: remote: Failed exitCode=1, command="D:\Program Files (x86)\nodejs\0.12.0\node.exe" "D:\Program Files (x86)\npm\2.5.1\node_modules\npm\bin\npm-cli.js" install --productionremote: npm ERR! Please include the following file with any support request:remote: An error has occurred during web site deployment.remote: npm ERR! D:\home\site\wwwroot\npm-debug.logremote: remote: Error - Changes committed to remote repository but deployment to website failed

Hello,
From your description, this issue seems to be related with azure development, i move it to the azure forum there are azrue experts will help you. The current forum is for .NET class libraries.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

PSE 6 "Could not load the styles b/c of a program error

This is an error that evolved from the "This styles file is bad or corrupt.
Found a folder accidentally downloaded into Styles area and removed it, checked every other file in there, all good, rebooted. Now PSE has a new error "Could not load the styles because of a program error." Any more help?

I posted this on your other thread...
Yeah, it's the bit I deleted but wanted to find the reference before posting.
Navigate to the MediaDatabase.db3 file and rename it...add a ~to the front of the filename or name it something like MediaDatabase.db3.TMP. It will take several minutes to rebuild...may take 5 - 10 minutes so be patient.
Location:
XP:
C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\6.0\Locale\en_US
Vista:
C:\Application Data\Adobe\Photoshop Elements\6.0\Locale\en_US

Could not load the bigger Tiles module

Similar Messages

Maybe you are looking for