Could not retreive datasource oracle in webdynpro
Hi,
I've defined a datasource for oracle in the visual administrator :
jdbc datasource :
Data Source Type: driver-based
Driver Library: ojdbc14.jar
SQL Engine: vendor sql
Isolation Level: default
driver class : oracle.jdbc.OracleDriver
URL: jdbc:oracle:thin:@<host>:<port>:<sid>
I try to use it in my webdynpro :
javax.sql.DataSource ds=(javax.sql.DataSource)ctx.lookup(<dataSource name>);
java.sql.Connection con=ds.getConnection();
java.sql.Statement stmt=con.createStatement();
con.close();
But it throws the following exception :
com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of Baical_V1.
Does someone know what I could do ?
Thanks
Regards
Claire
Thanks Anilkumar,
I've resolved my problem :
this parameters can't work :
Data Source Type: driver-based
Driver Library: ojdbc14.jar
SQL Engine: vendor sql
Isolation Level: default
driver class : oracle.jdbc.OracleDriver
URL: jdbc:oracle:thin:@<host>:<port>:<sid>
like it is explained in thread :
JDBC Connector in NetWeaver Dev Studio WebAS
I couldn't issue with a "driver-based" dataSource type AND the ojdbc14.jar driver like indicated in note 941594.
I've used this parameters :
Datasource type: ConnectionPoolDataSource
JDBC Version: 2.0
Driver: <name of the ojdbc14.jar deployed driver> (this driver has to be deployed before ! : http://help.sap.com/saphelp_nw04/helpdata/en/80/4f34c587f05048adee640f4c346417/frameset.htm)
SQL Engine: vendor sql
Isolation Level: default
Driver class: oracle.jdbc.pool.OracleDataSourceFactory
CPDS Classname: oracle.jdbc.pool.OracleConnectionPoolDataSource
Additional properties:
url = jdbc:oracle:thin:@host:port:instance
user = xxxx
password = yyyyy
(Names of properties must be lower-cased)
A good solution to find where was the problem, was to try to declare the datasource directly in the application (adding a data-sources.xml in the META-INF directory http://help.sap.com/saphelp_nw04/helpdata/en/64/0bee3da7138e5be10000000a114084/frameset.htm
) so you can have the detail of the exception in the datasource when you deploy the application, whereas when you create a wrong datasource, in the WAS, you have no message !
Regards,
Claire
Similar Messages
-
Why is it that after upgrading to IOS 6, I could not retreive my full list of my purchased applications & ganes list in the app store now !!!!
Whenever I try to tab my purchased in the update feature of app store; not only does the long list of my previous purchases do not showed up like in IOS 5 do but after a while it just prompt out to the main home page. I tried this for both my 3GS and 4GS too and both have the same problem. APPLE INC please rectify this serious problem as soon as possible.Did you read your other posted question, that has been answered.
-
Hi,
I installed weblogic 12.1.2.0.0 with RHEL5.6. After the installation, I tried to post the following class path in setDomainEnv.sh file under the domain home directory,
POST_CLASSPATH="/prosun/jasper/jasperreports-3.6.0.jar:/prosun/jasper/commons-digester-1.7.jar:/prosun/jasper/log4j-1.2.15.jar:/prosun/jasper/org.apache.commons.beanutils_1.6.jar:/prosun/jasper/org.apache.commons.collections_3.1.jar:/prosun/jasper/org.apache.commons.logging_1.0.4.jar:/prosun/jasper/iText-2.1.0.jar:/prosun/jasper/groovy-all-1.5.5.jar"
While i am trying to start the Admin server, the server didn't started and following exception is reported in nohup.out file. Please help me to resolve this issue.
The above library jars are required for our applications.
Could not load Logmanager "oracle.core.ojdl.logging.ODLLogManager"
java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager
java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager
at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
at java.security.AccessController.doPrivileged(Native Method)
at java.util.logging.LogManager$1.run(LogManager.java:186)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.security.AccessController.doPrivileged(Native Method)
at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
at java.util.logging.LogManager.<clinit>(LogManager.java:176)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:483)
at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:452)
at java.util.logging.LogManager$1.run(LogManager.java:186)
at weblogic.kernel.KernelLogManager.createClientLogger(KernelLogManager.java:44)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.kernel.KernelLogManager.access$000(KernelLogManager.java:17)
at java.util.logging.LogManager.<clinit>(LogManager.java:176)
at weblogic.kernel.KernelLogManager$LoggerMaker.<clinit>(KernelLogManager.java:20)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:483)
at weblogic.kernel.KernelLogManager.getLogger(KernelLogManager.java:26)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:452)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at weblogic.kernel.KernelLogManager.createClientLogger(KernelLogManager.java:44)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at weblogic.kernel.KernelLogManager.access$000(KernelLogManager.java:17)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at weblogic.kernel.KernelLogManager$LoggerMaker.<clinit>(KernelLogManager.java:20)
at java.lang.reflect.Method.invoke(Method.java:601)
at weblogic.kernel.KernelLogManager.getLogger(KernelLogManager.java:26)
at weblogic.logging.MessageLogger.log(MessageLogger.java:96)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at weblogic.logging.MessageLogger.log(MessageLogger.java:111)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at weblogic.logging.WLMessageLogger.log(WLMessageLogger.java:52)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at weblogic.security.SecurityLogger.logDisallowingCryptoJDefaultJCEVerification(SecurityLogger.java:13444)
at java.lang.reflect.Method.invoke(Method.java:601)
at weblogic.security.utils.SecurityUtils.turnOffCryptoJDefaultJCEVerification(SecurityUtils.java:81)
at weblogic.logging.MessageLogger.log(MessageLogger.java:96)
at weblogic.Server.main(Server.java:70)at weblogic.logging.MessageLogger.log(MessageLogger.java:111)
at weblogic.logging.WLMessageLogger.log(WLMessageLogger.java:52)
Could not load Logmanager "oracle.core.ojdl.logging.ODLLogManager"
java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager
at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
at java.util.logging.LogManager$1.run(LogManager.java:186)
at java.security.AccessController.doPrivileged(Native Method)
at java.util.logging.LogManager.<clinit>(LogManager.java:176)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:483)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:452)
at weblogic.kernel.KernelLogManager.createClientLogger(KernelLogManager.java:44)
at weblogic.kernel.KernelLogManager.access$000(KernelLogManager.java:17)
at weblogic.kernel.KernelLogManager$LoggerMaker.<clinit>(KernelLogManager.java:20)
at weblogic.kernel.KernelLogManager.getLogger(KernelLogManager.java:26)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
Regards,
Anand Krishnanhi, you should not do nothing with user root.
please, don't use root again for weblogic administration.
list all files with root permissions:
move to Middleware Home, example: cd /u01/app/oracle/Middleware
find . -user root
if there are files with root permissions, change it to oracle:oinstall
I saw this:
Could not load Logmanager "oracle.core.ojdl.logging.ODLLogManager"
java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager
Please check in DOMAIN_HOME/bin/setDomainEnv.sh file if exist this:
JAVA_OPTIONS="-Djava.util.logging.manager=oracle.core.ojdl.logging.ODLLogManager ${JAVA_OPTIONS}"
export JAVA_OPTIONS
MWCONFIG_CLASSPATH=${FMWCONFIG_CLASSPATH}${CLASSPATHSEP}${COMMON_COMPONENTS_HOME}/modules/oracle.odl_11.1.1/ojdl.jar
export FMWCONFIG_CLASSPATH
if exist, replace for:
JAVA_OPTIONS="${JAVA_OPTIONS}"
export JAVA_OPTIONS
if not existe, its necesary for you to use /prosun/jasper/org.apache.commons.logging_1.0.4.jar in your classpath?. If it isn't necesary delete it, and restart the AdminServer. -
Could not retreive download information in App Store via Wi-Fi!
I have a very very critical problem about downloading stuffs in App Store! The detail is when I open App Store, after loading stuffs, it said: "Could not retreive download informations, please connect to iTune." I don't care about the message, so I continue anyway. After entering my account informations, the second problem
appeared, there's another message said: "To ensure the secure connection, please check your setting in Date & Time." some like that. It's okay, I configured the setting, but after that, it showed me the same message. So I have no idea about what happening. Because this is not work, so I follow the first recommandation: connect to iTune. But it also not work. Is there have any relations in these 3 problem? Now I feel lose and I need some help!!!Are you accessing the App Store on iPod Touch or iTunes?? maybe you should try the other.
-
Could not connect to oracle OLAP
Hi
when i connect to Disco. Plus for "OracleBI Discoverer for OLAP" and Database as "localhost:1521:orcl" i got this message:
"D40-Could not connect to oracle OLAP"
so i run a Quick Diagnosis and i got this report:
JDK version = 1.4.2_04
BI Beans internal version = 3.2.1.0.13
Discoverer Plus OLAP version = 10.1.2..07.59
Discoverer Version = 10.1.2.45.46c
Connect to database = successful
JDBC driver version = 10.1.0.3.0
JDBC JAR file location = \localhost\disco\plus_files\d4o_double.jarjar
Database version = 10.1.0.4.0
OLAP API Server version = 10.1.0.4.0
OLAP AW Engine version = 10.1.0.4.0
OLAP Catalog version = 10.1.0.4.0
BI Beans Catalog version = N/A; not installed in younis
Discoverer Catalog version = N/A; not installed in younis
Authorized for Discoverer Plus OLAP = No!
OLAP API JAR file version = 9.2
OLAP API JAR file location = \localhost\disco\plus_files\d4o_double.jarjar
Load OLAP API metadata = Successful
Number of metadata folder = 1
Number of metadata measures = 3
Number of metadata dimensions = 4
Thanks
YounisI think you forgot grant OLAP_USER, D4OPUB role to younis
Make sure D4OSYS user is created. D4OSYS is the owner when the Discoverer OLAP catalog is created.
Make sure the OLAPSYS user and OLAP_USER/OLAP_DBA role is created in order to grant D4OPUB. You might need to run $ORACLE_HOME\olap\admin\olap.sql to create those accounts eventhough you have OLAP option installed.
I found directly install latest Oracle database patchset (10.1.0.4) and then create database doesn't have those accounts automatically, unless you are upgrade from 10.1.0.3.
Hope this can help -
Could not start the oracle service on local computer
Could not start the oracle service on local computer, did not return an error blah, blah.
I am running Oracle 9i r2 Windows, and have choosen to start my instances manually. When i start them up I get the above error message. But if I am a little patient the services do start up and all is fine, so far as i can see anyway.
I am curious to know why does this error message arise.
Thanks in anticipation
FergusTo start the database in windows you have to start first the OracleService<SID> service.
These are the steps that you have to do at the command line:
NET START OracleService<SID>
SET ORACLE_SID=<database sid>
sqlplus /nolog
conn sys/password as sysdba
startupJoel Pérez
http://otn.oracle.com/experts -
D40-1015 Could not connect to Oracle OLAP
Hello,
I have installed new 10g R2 database on Sun Solaris 64 bit, When I access the discoverer I am getting this 'D40-1015 Could not connect to Oracle OLAP' error. I have installed OLAP and XDB everything.
How do I recover from this error, any idea would be greatly appreciated.
FYI,
OracleBI Discoverer
Diagnose Connection
BI Beans Catalog Version....=N/A; not installed in uv
Discoverer Catalog version....=N/A; not installed in uv
Thanks,Hi,
Did you install the Discoverer catalog and authorize users? (see the Configuration Guide)
Regards -
"could not start the Oracle BI Presentation Server on Local computer error"
Hello Folks,
i am trying to start the OBIEE Presentation services, The OBIEE server and Java Host Services are started.
i am getting this error and i didnt change any settings and finally getting this error
"Windows could not start the Oracle BI Presentation Server on Local Computer. For more information, review the System Even Log. If this is a non Microsoft service contact the service vendor, and refer to service-specific error code -1."
thanksHere is the solution from another freind
1. Stop BI Server Service > Start BI Server Service > Start BI Presentation Service. If that doesn't work...
2. Restart machine and follow step 1. If that doesn't work...
3. Check instantconfig.ini file and check syntax is correct. Also check java directory path mentioned is the valid one. If that doesn't work...
4. Rename the catalog folder to something else and follow step 1. It will create new catalog folder. Then copy _Shared from old catalog folder and you are good to go.
catalog folder will be in oraclebidata/web/catalog...
either delete the folder and create a new empty one or rename it
also have a look at instanceconfig.ini file
thanks -
Could not connect to Oracle database from excel macro. Getting connection not open.
Hi all,
I could not connect to oracle database using excel macro. After much R&D also, I cannot find right solution. Please help me where I am doing wrong.
Sub Button2_Click()
Dim Conn As New ADODB.Connection
Dim RS As New ADODB.Recordset
Dim Cmd As New ADODB.Command
Dim sqlText As String
Dim Row As Long
Dim Findex As Long
Dim Data As Worksheet
Dim X As Long
Dim UID As String
Dim PWD As String
Dim Server As String
Dim strCon As String
Application.Calculation = xlCalculationManual
UID = "myUserid" 'Enter the User ID
PWD = "myPassword" 'Enter the password
Server = "myHostname or myServername"
Set Data = Sheets("Sheet2")
Data.Select
Range("A:J").ClearContents
strCon1 = "Provider = Microsoft.ACE.OLEDB.12.0;DATA SOURCE=myHostName;Database=myDBname;uid=myUserid;pwd=myPassword;"
Conn.Open (strCon1)
Cmd.ActiveConnection = Conn
Cmd.CommandType = adCmdText
' Put your query next
sqlText = " select * from table "
Cmd.CommandText = sqlText
Set RS = Cmd.Execute
For X = 0 To 17
Data.Cells(1, X + 1) = RS.Fields(X).Name
Next
Do While Not RS.EOF 'this loops through the data and puts it in the spreadsheet
Row = Row + 1
For Findex = 0 To RS.Fields.Count - 1
Data.Cells(Row + 1, Findex + 1) = RS.Fields(Findex).Value
Next Findex
RS.MoveNext
Loop
Application.Calculation = xlCalculationAutomatic
Application.Calculate
End Sub
sammyI have set oci.dll in to the path specified. Prior to this I musy say that, I have 64 bit excel 2010 & installed respective drivers from the link provided http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html
But
still I am facing as:-" Provider cannot be found. It may not be properly installed."
sammy -
Could not connect to Oracle database. (HY000): BI Answers Problem
Hi,
I am using OBIEE 11g and 11g admin client tool is installed in my machine. I created one rpd and I deploy that rpd in the server through Enterprise manager fusion middleware control. But when try to run the analysis from BI answers it throws and error like
"TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)".
In the rpd I use OCI default (10g/11g) and cheked that connection is successful and also when I click on view data option in the physical layer I am able to see the data. I cheked with DBAs and correct TNS entries are also there in the server. Could not understand where is the problem.
Please help.
Thanks
TitasTry like this
Call Interface: Default (OCI 10g/11g)
Data source Name->localhost:1521/XE
BTW: Whats the client bit version 32/64 bit, if you have 64bit and above is not working try with Oracle client 32bit.
Pls mark correct/helpful if helps -
ORA-12154: TNS:Could not connect to Oracle database.
Hi All,
I'm getting the following error while trying to access OBIEE dashboard.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
I have oracle 10g R2, I can connect my database using SQLPLUS. I am not able to do Update Row Count from Admin tool also. If anyone come across this issue, please share your experience. Anyhelp would be appreciated.
Thanks,
RaviThe problem is OBIEE server not able to read the tnsnames.ora file. That depends upon the what you set as ORACLE_HOME. that can be find with tnsping command at command line. Follow this article about setting up oracle home and oci drivers
http://oraclebizint.wordpress.com/2007/10/03/oracle-bi-ee-101332-identifying-oracle-homes-for-oci-drivers/
please make sure that your DB-home is the first entry in your PATH environment variable.
Have you created TNS_ADMIN environment variable. Create a environment variable TNS_ADMIN which maps to location where tnsnames.ora file located.
let me know if you are not able to load after this steps.
- Madan -
Could not start the oracle orcl service on local computer 1053
I ve oracle 8i with Windows XP ,when I try to start it manually also it show ing the 1053 could not start the oracle orcl service on local computer 1053 what should i do?
Thanks
[email protected]go to oarcle service
click the service
choose logon
click the boutton
local system. now try start service -
Could not start the Oracle Forms Server
I am using Windows 2000 Professional
The Oracle Forms Server [Forms60Server] service failed to start due to the following error:
Access is denied.
Event ID: 7000
Source: Service Control Manager
Description: Could not start the Oracle Forms Server [Form60Server] service on a Local Computer.
Error 0005: Access is DeniedDescription:
I Installed Oracle Forms6i and when i tried to run web test form I got this :
Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Description:
Application popup: ifcgi60.exe - Unable To Locate DLL : The dynamic link library D2LA60.dll could not be found in the specified path C:\orant\tools\web60\cgi;.;C:\WINNT\System32;C:\WINNT\system;C:\WINNT;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem.
this missed file already exist in <Oracle Home>\Bin
directory, and if I copied it to the asked destination
it asks for more CORE40.dll and NLSRTL33.dll
and then those also copied then the screen disappears
Question : Why did this error occur, what went wrong
and how do I fix this problem
2)the other question is in Forms9iDS Version 9.0.2.7.0 I am getting this error
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Description:
The OracleOraHome9iAgent service failed to start due to the following error:
Access is denied.
FRM-92060 :Failed to connect to the server
Bad machine specification :/forms90/190servlet:-1
Any Suggestion will be appreciated -
Could not connect to Oracle Server...
Hi All. I set up a Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on a Win XP Pro machine (say Machine A). When I tried to connect to the database using SQL*Plus from another machine (say Machine B) its throwing error...
ORA-12170: TNS: Connect timeout occurred
When I tried to telnet by IP...its saying
Connecting To xx.xx.xx.xx...Could not open connection to the host, on port 23: Connect failed
But its pinging successfully to this IP.
I have added a TNS entry to the Machine B tns.ora.
Please let me know what to do next?
I'm able to connect to database form Machine A through SQL*Plus.>> Connecting To xx.xx.xx.xx...Could not open connection to the host, on port 23: Connect failed
What command did you try check this??
Did you try to telnet as follows
telnet ip database_port i.e. telnet xxx.xxx.xxx.xxx 1521
>> I have added a TNS entry to the Machine B tns.ora.
Are you able to tnsping the tns service?
c:\>tnsping <tnsnames entry>
Regards,
Sabdar Syed. -
Fix MSBuild error = Could not find .datasource file
Hi,
I have a VS2010 solution that I opened in VS2013 and followed the automatic conversion process. After that I edited the TFS build process template to remove the extraneous references to Version=10.0.0.0 which were duplicated due to a VS2010 bug (I
found a blog by an MS employee that pointed to this issue). The solution builds fine from my VS2013 but when I submit it to TFS build server using the modified build process template, I get an error (please see attached) referring to missing .datasource
file for one of the WCF projects.
What could I do in terms of possible adding build parameters to the MSBuild or changes to the WCF project to remove this error?
Thanks
$/E2E/Root Controller/Main Branch/OATI.E2E.WebService.sln - 1 error(s), 218 warning(s)
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\WebApplications\Microsoft.WebApplication.targets (178): Unable to copy file "Service References\GridPortInfoService\WcfServiceE2E.GridPortInfoService.HardwareInfoResponse.datasource" to
"D:\Builds\8\132\Binaries\WcfServiceE2E\_PublishedWebsites\WcfServiceE2E\Service References\GridPortInfoService\WcfServiceE2E.GridPortInfoService.HardwareInfoResponse.datasource". Could not find file 'Service References\GridPortInfoService\WcfServiceE2E.GridPortInfoService.HardwareInfoResponse.datasource'.Hi LongD,
Thanks for your post.
What’s the version of your TFS, TFS 2010 or TFS 2013?
You want convert your VS 2010 solution to VS 2013 version, and built it using TFS 2013 Build?
On your current build agent machine, try to manually build your converted solution using VS 2013 and MSBuild command separately, ensure you can manually build your solution on build agent machine successfully. If cannot manually build on build agent machine,
please resolve this manually build issue first.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Notebook as second display?
Hi all, Is it possible to do this? I want to practice my keynote presentation. I have hooked up through the mini-display (MBP...recent) to a DVI connection on an older Powerbook G4. Should I be able to use to the display on the powerbook as a second
-
Linking FM 9 "At Insertion Point" graphics to an RH 8 project
Using Technical Communication Suite 2, I have built a structured FM 9 book in order to generate a RH 8 help system. This is a software user guide and I cannot avoid using inline graphics in some body elements. The book only has regular .fm documents
-
Using anchor within spry accordion???
Hi everyone, I have an index page www.nateurope.com. The news are linking to an accordion http://www.nateurope.com/news.htm. I added anchors because I thought that it would be nice if the user click on March, 22 Virtual Conference (www.nateurope.com)
-
As many of these posts have indicated there are numerous problems with the n93 v20 fw below is a list of the probs ive encountered so far(from the forum) 1.Night mode video recording-the video is recorded in B/W 2.Battery Indicator- randomly goes up
-
Hi, i'm really confused right now, it's so weird, i just can't get it. I use POJO business objects in a layer between my session fa�ades and my cmps. I already have on use case working like this: the fa�ade doesn't make references to other ejbs (neit