Could not see Oracle ODBC driver in Windows ODBC

Hi,
I have install the runtime version followed by custom->Windows Oracle Interface successfully.
Any other steps that i have missed out or lack off in installing the Oracle ODBC driver?
Thanks in advance.
Tony

It's not a plot, but it's sneaky.
I had the same problem when I installed Oracle 10 client. There is a similar issue on the Oracle forum (Re: ODBC Driver Install Problem. Basically, what was happening is a line had been entered in the ODBC Drivers file that contains "@=". Anything following that line is NOT displayed in the ODBC Admin list.
To fix this problem, open Regedit and export the "HKLM\SOFTWARE\ODBC\ODBCINST.INI\ODBC Drivers" key to a file. Edit the file to remove the line "@=" and save the file. Delete the registry key, and merge in your updated file.

Similar Messages

Help - Could not load 'oracle.jdbc.driver.OracleDriver ...

I'm using oci8 to connect to the Oracle database.
URL: jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(PORT=1527)(HOST=testhost)))(CONNECT_DATA=(SID=fnoe2pa)))
When I tried to start the weblogic server, I got the following errors:
Can you suggest what I should do next (step-wise)??? Thanks, Bobby
<Sleeping in createResource()>
####<15/08/2002 14:09:43> <Error> <JDBC> <qawebmethods> <myserver>
<main> <system> <> <001060> <Cannot startup connection pool
"pool/test_myapp" weblogic.common.ResourceException:
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:212)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:134)
     at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.java:705)
     at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:282)
     at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:650)
     at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:360)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:285)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:239)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:199)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:360)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
     at $Proxy31.updateDeployments(Unknown Source)
     at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:2977)
     at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:372)
     at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:160)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:360)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
     at $Proxy42.start(Unknown Source)
     at weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(ApplicationManagerMBean_CachingStub.java:480)
     at weblogic.management.Admin.startApplicationManager(Admin.java:1234)
     at weblogic.management.Admin.finish(Admin.java:644)
     at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:524)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
     at weblogic.Server.main(Server.java:35)
>
####<15/08/2002 14:09:43> <Info> <JDBC> <qawebmethods> <myserver>
<main> <system> <> <001082> <Creating Data Source named
jdbc/test_myapp for pool pool/test_myapp>
####<15/08/2002 14:09:43> <Info> <JDBC> <qawebmethods> <myserver>
<main> <system> <> <001070> <Checking existence of connection pool
pool/test_myapp requested by user system>
####<15/08/2002 14:09:43> <Error> <JDBC> <qawebmethods> <myserver>
<main> <system> <> <001059> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(jdbc/test_myapp) can't
be created with non-existent Pool (connection or multi)
(pool/test_myapp)>
####<15/08/2002 14:09:50> <Info> <EJB> <qawebmethods> <myserver>
<main> <system> <> <010008> <EJB Deploying file: myapp-ejb.jar>
####<15/08/2002 14:09:50> <Warning> <J2EE> <qawebmethods> <myserver>
<main> <system> <> <160007> <You are running WebLogic Server with J2EE
1.3 features enabled. The implementation of specific J2EE 1.3 features
(EJB 2.0, JSP 1.2, Servlet 2.3, and J2EE Connector Architecture 1.0)
in BEA WebLogic Server 6.1 is of a non-final version of the
appropriate specification. It is subject to change in future releases
once the specification becomes finalized. This may cause application
code developed for BEA WebLogic Server 6.1 that uses the new features
of J2EE 1.3 to be incompatible with the J2EE 1.3 platform supported in
future releases of BEA WebLogic Server.>
####<15/08/2002 14:09:59> <Error> <J2EE> <qawebmethods> <myserver>
<main> <system> <> <160001> <Error deploying application myapp-ejb:
Unable to deploy EJB: Counter from myapp-ejb.jar:
The DataSource with the JNDI name: jdbc/test_myapp could not be
located. Please ensure that the DataSource has been deployed
successfully and that the JNDI name in your EJB Deployment descriptor
is correct.
>
####<15/08/2002 14:09:59> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101053> <[HTTP myserver] Loading web app: myapp>
####<15/08/2002 14:09:59> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101059> <[myserver] Loading myapp from WAR file:
C:\bea\wlserver6.1\.\config\mydomain\applications\.wlnotdelete\wlap31483\myapp.war>
####<15/08/2002 14:09:59> <Warning> <J2EE> <qawebmethods> <myserver>
<main> <system> <> <160007> <You are running WebLogic Server with J2EE
1.3 features enabled. The implementation of specific J2EE 1.3 features
(EJB 2.0, JSP 1.2, Servlet 2.3, and J2EE Connector Architecture 1.0)
in BEA WebLogic Server 6.1 is of a non-final version of the
appropriate specification. It is subject to change in future releases
once the specification becomes finalized. This may cause application
code developed for BEA WebLogic Server 6.1 that uses the new features
of J2EE 1.3 to be incompatible with the J2EE 1.3 platform supported in
future releases of BEA WebLogic Server.>
####<15/08/2002 14:09:59> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101031>
<[WebAppServletContext(1412030,myapp,/myapp)] extracting classfiles to
C:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\wlap31483\WEB-INF\_tmp_war_myapp:>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101032>
<[WebAppServletContext(1412030,myapp,/myapp)] extracted classfiles
successfully...>
####<15/08/2002 14:10:04> <Info> <HTTP Session> <qawebmethods>
<myserver> <main> <system> <> <100037> <Creating SessionContext of
type: memory for webapp: /myapp>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101047>
<[WebAppServletContext(1412030,myapp,/myapp)] registering classpath
servlet with initArgs 'null'>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101047>
<[WebAppServletContext(1412030,myapp,/myapp)] registering getior
servlet with initArgs 'null'>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101047>
<[WebAppServletContext(1412030,myapp,/myapp)] registering tunneling
servlets with initArgs 'wl-dispatch-policy=direct'>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101047>
<[WebAppServletContext(1412030,myapp,/myapp)] registering JSPServlet
with initArgs '[JspConfig:
verbose=true,packagePrefix=jsp_servlet,-compiler=javac,compileFlags=,workingDir=C:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\wlap31483\WEB-INF\_tmp_war_myapp,pageCheckSeconds=1,superclass=null,keepgenerated=false,precompileContinue=false,compilerSupportsEncoding=true,encoding=null,defaultfilename=index.jsp,compilerclass=null,noTryBlocks=false]'>
####<15/08/2002 14:10:04> <Debug> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101097> <Registering ServletContext:
"myapp:/myapp">
####<15/08/2002 14:10:04> <Info> <J2EE> <qawebmethods> <myserver>
<main> <system> <> <160003> <Deployed : myapp>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101133> <Initializing WEB server myserver>
####<15/08/2002 14:10:04> <Notice> <Management> <qawebmethods>
<myserver> <main> <system> <> <141052> <Application Poller started for
development server.>
####<15/08/2002 14:10:04> <Notice> <WebLogicServer> <qawebmethods>
<myserver> <ListenThread> <system> <> <000202> <ListenThread listening
on port 7001>
####<15/08/2002 14:10:04> <Info> <NT Performance Pack> <qawebmethods>
<myserver> <ListenThread> <system> <> <000000> <NATIVE: NTSocketMuxer
was built on Nov 1 2001 16:39:28
>
####<15/08/2002 14:10:04> <Notice> <WebLogicServer> <qawebmethods>
<myserver> <SSLListenThread> <system> <> <000202> <SSLListenThread
listening on port 7002>
####<15/08/2002 14:10:05> <Notice> <Management> <qawebmethods>
<myserver> <main> <system> <> <141030> <Starting discovery of Managed
Server... This feature is on by default, you may turn this off by
passing -Dweblogic.management.discover=false>
####<15/08/2002 14:10:05> <Notice> <WebLogicServer> <qawebmethods>
<myserver> <main> <system> <> <000331> <Started WebLogic Admin Server
"myserver" for domain "mydomain" running in Development Mode>
####<15/08/2002 14:10:11> <Info> <NT Performance Pack> <qawebmethods>
<myserver> <ExecuteThread: '14' for queue: 'default'> <> <> <000000>
<Allocating: '2' NT reader threads>
####<15/08/2002 14:10:13> <Info> <HTTP> <qawebmethods> <myserver>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <system>
<> <101047> <[WebAppServletContext(5367844,console,/console)] actions:
init>
####<15/08/2002 14:10:18> <Info> <HTTP> <qawebmethods> <myserver>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <system>
<> <101047> <[WebAppServletContext(5367844,console,/console)]
FileServlet: init>
####<15/08/2002 14:10:18> <Info> <HTTP> <qawebmethods> <myserver>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <system>
<> <101047> <[WebAppServletContext(5367844,console,/console)]
FileServlet: Using standard I/O>

"thorick" <[email protected]> wrote in message news:<[email protected]>...
Most likely, the OCI libraries could not be loaded.
Before continuing down this path, is there any reason
why you want to use an OCI based Driver as opposed to the
all Java Oracle thin driver ?There is indeed a valid reason for my choice.
I am currently connecting to the Oracle "Rdb" 7.0 database (located on
VMS) - not Oracle Oracle.
The SQL Service software we're currently using is version 7.1. This
version works well with the OCI8 driver (when connecting to the
database from Windows NT). This version of SQL Service however does
NOT work for the THIN driver (unless we upgrade the SQL Service to
version 7.1.5.5 - which we're not prepared to do so because it is not
stable enough from our previous test/trials). SQLSRV Version 7.1.5.5
works for THIN driver but it will result in uncommitted
transactions/unresolved connection/stopping of listener issues and
there is a need to restart the service from time to time. Oracle has
since confirmed that this is a bug that they have yet to resolve...
So we have to stick to OCI8 (THICK) for the time being. I would really
appreciate it very much if you can tell me the various OCI libraries
that I need to load (in terms of WebLogic Server config file settings
etc..).
By the way I have already installed the Oracle 8 client software on
the NT server (where WebLogic Server is) and I have also set up the
relevant SID (using the Net8 Assistant) that points to the Oracle Rdb
database on the VMS. I have also tried using SQL*Plus to connect to
the database and I can connect properly to the database. But WebLogic
simply doesn't seem to load the software.
Help...
Regards,
Bobby Brown, writing from Australia.

Win2000+weblogic510+oracle8i,Could not load 'oracle.jdbc.driver.OracleDriver'

星期四 三月 23 20:30:17 GMT+08:00 2000:<E> <JDBC Pool>
Failed to create connection pool "ejavaPool"
weblogic.common.ResourceException: Could not load 'oracle.jdbc.driver.OracleDriver'
because
System.loadLibrary threw java.lang.UnsatisfiedLinkError
with the message 'oracle.jdbc.driver.OracleDriver'.
This could occur if the JDBC driver is not in the weblogic.class.path.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system or in your environment.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://www.weblogic.com/docs/install/install_jdbc.html
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvFactory.java:82)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.<init>(ConnectionEnvFactory.java:97)
     at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:328)
     at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java, Compiled Code)
     at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:220)
     at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
     at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java, Compiled Code)
     at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
any idea?

If you are trying to use the thin driver you need to make sure you have the
classes12.zip file in the weblogic server classpath. You can download this
driver from Oracle website.
hth
sree
"meijunyong" <[email protected]> wrote in message
news:[email protected]...
>
星期四 三月 23 20:30:17 GMT+08:00 2000:<E><JDBC Pool>
Failed to create connection pool "ejavaPool"
weblogic.common.ResourceException: Could not load'oracle.jdbc.driver.OracleDriver'
because
System.loadLibrary threw java.lang.UnsatisfiedLinkError
with the message 'oracle.jdbc.driver.OracleDriver'.
This could occur if the JDBC driver is not in the weblogic.class.path.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system or in your environment.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://www.weblogic.com/docs/install/install_jdbc.html
atweblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvF
actory.java:82)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.<init>(ConnectionEnvFacto
ry.java:97)
atweblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:328
at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java,Compiled Code)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:220)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java, CompiledCode)
atweblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
any idea?

Could not see oracle database homepage in oracle 10g version

hi ,
i am trying to open database home page option of oracle 10g software, but could not do it.
i have started the services ORACLEXETNS listener,oracle service XE, and could not see the database home page.
i am new to oracle 10g,
i am getting the error 'page cannot be displayed' .
could some one help me regarding this.

Are you taking about enterprise manager .Type a correct address in address bar to run web base enterprise manager.you can check whether enterprise manager is running or not by using command >emctl status dbconsole .Or you have some other issue.please write if there is any error.
Regards

How can I do to get Oracle ODBC driver in Windows?

Hello,
Please, I need help to use Oracle ODBC driver in Windows 7. I installed Oracle Client 10g with the ODBC driver, but I can't use it. OracleODBC driver don't appear in the driver list when I want to create a new datasource. How I can do to get Oracle ODBC driver for create a new datasource?
Thank
Edited by: user4528703 on 13 mars 2010 02:01

Hello,
To get the ODBC driver you should run a custom Oracle Client installation and Select
Oracle Windows Interfaces 10.2.0.1.0.
Then, you'll get the Oracle ODBC Driver 10.2.0.1.
But, be aware that Oracle didn't certify Windows 7.
So, if afterwards, you experience some trouble, think to install Oracle with Xp compatibilty mode, or
wait to Oracle 11.2.0.1 which will be certified on Windows 7.
Hope this help.
Best regards,
Jean-Valentin

I could not see my windows 8 option anymore in mac?

I could not see my windows 8 option anymore in mac?

How to share a Mac's files with a PC and vice versa.

ODBC Driver in Windows XP.

When I attempt to connect to the Oracle ODBC Driver in Windows XP I get an error IM003 (Driver could not be loaded, system error 5) If I run the application from an administrator account, the driver works fine.
I am using Oracle v9.2010. I am trying to connect from the same computer that is running the database without any other drivers/clients installed.
I am using C to develop the application using the ODBC API.

You probably need to grant the non-Administrator user read/execute rights on the %ORACLE_HOME% directory & subdirectories. You probably don't need execute on anything other than %ORACLE_HOME%\bin, and you probably don't need read access on every subdirectory, but I don't see much of a security threat from giving everyone read/execute to the whole directory.
Justin

Admin tool could not load the essbase driver.Please check the configuration

Hi All,
I have obiee11g installed machine and want to connect that machine with essbase.
For that I have installed Essbase Client [11.1.2.1] by downloading the following files,
*1>Oracle Hyperion Enterprise Performance Management System Installer Fusion Edition Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
*2>Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0 for Microsoft Windows (32-bit) Part 1 of 4*
*3>Oracle Essbase Clients Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
After that I manually added the ESSBASEPATH and ARBORPATH as Environment Variables (USER).
And also I manually added the essbasepath in bi-init.cmd file.
Finally I tried to connect essbase with BI through BI Admin Tool, I get the following Error
"*Admin tool could not load the essbase driver.Please check the configuration*."
kindly guide me to overcome this issue.
Thanks and Regards
sai
Edited by: 923924 on Apr 24, 2012 5:20 AM

Until you perform the configuration on the AD server, the following message will appear:
Error: Could not start the SSO service. Please check the configuration.
So configure the AD server so that the error message will not appear again.

Could not reconnect all network drives

I have several drives mapped on different Windows 7 boxes in my office. Just about every time I boot up one of these systems I receive the message "Could not reconnect all network drives" in the system tray.
I should note that merely clicking the drive inside Windows Explorer will restore the connection. I store the server logon credentials in Control Panel / Credential Manager then just map the network paths to drive letters. I'm pretty sure the
problem doesn't stem from any credentials type of problem though, because I have the exact same situation when connecting to only open shares. I have noticed that a couple applications will restore the connection themselves when trying to access information
on a share. Most applications however will give an error and time out trying to access the shares unless I go and manually click each drive letter in Explorer. For instance if I place Firefox bookmarks on a share and open Firefox, Firefox will
display no bookmarks until I click the drive in Explorer and reopen Firefox.
One thing I can do to fix the problem is hard code my IP address. I never receive the message if a computer has fixed IP address. My router hands out IPs on the LAN dynamically, so I switch it to another router and tried a using a Linux based dhcp-server
as well. Neither fixed the problem.
I'm a long time user of batch files and realize I could place use one as a band aid for this issue, but I don't want to go that route.

Hello marstech,
According to the research, the mapped drive lost issue may be caused by the several possible reasons:
Possible reason1. The problematic client doesn't reconnect to the target share at logon.
Please follow the steps to re-configure the mapped driver on the client and then check if the issue will re-occur.
Steps:
a. Open "My Computer"
b. Click on "Tools" and then select "Map Network Driver"
c. input the \\ipaddressofserver\sharename to give the path of the share
d. Check "Reconnect at logon"
e. Drive gets mapped
f. Double click on the drive to check.
Possible Reason 2. Antivirus software or Windows Firewall may block the SMB protocol on clients.
Please check if there is any Antivirus software and the Windows Firewall is enabled on the problematic client. If so, please disable them to check if the issue can be resolved.
Possible Reason3. Fast Logon Optimization is enabled on the clients.
The fast logon feature may affect the display and drive letter assignment of a mapped network drive. As a result, the drive may have been mapped; however, the user on client cannot see it in Windows Explorer. He may recognize it as a failed network drive mapping.
This is the reason why we usually suggest you to disable fast logon on the clients via a GPO, and please check if the mapped network drive will be occur under this circumstance.
Please also configure the following group policy setting to disable Fast Logon Optimization to see if the issue still exists on the problematic clients.
Computer Configuration\Administrative Templates\System\Logon\Always wait for the network at computer startup and logon
When this policy is enabled, a Windows XP client behaves in the same manner as a Windows 2000 client at both system startup and at user logon.
Please note: As this is a computer configuration, please run "Gpupdate /force" and then reboot the problematic clients to make it take into effect.
For more information about Fast Logon Optimization feature, please check the following KB article.
305293 Description of the Windows XP Professional Fast Logon Optimization feature
http://support.microsoft.com/?id=305293
831998 Mapped network drive shows no drive letter or will not allow you to create new long-named files or folders
http://support.microsoft.com/kb/831998
297684 Mapped Drive Connection to Network Share May Be Lost
http://support.microsoft.com/kb/297684
If the issue still exists on the problematic clients, please also try adding the following registry subkey on the problematic client to check it works.
Steps:
a. Click Start, click Run, type REGEDIT, and then click OK.
b. Locate and click the following registry subkey:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\NetCache
c. Click Edit, point to New, and then click DWORD Value.
d. Type SilentForcedAutoReconnect , and then press ENTER to name the value.
e. Double-click SilentForcedAutoReconnect .
f. In the Value data box, type 1, and then click OK.
Please feel free to let me know if you have any concen.
Hope the information can be helpful for you.
Thanks and Regards
Scorpio_Milo
MCTS: Windows Vista | Exchange Server 2007
MCITP: Enterprise Support Technician
MCITP: Server & Enterprise Administrator
Microsoft Infrastructure Consultant
Enterprise Service: Solution Architect
Microsoft Storage Team - File Cabinet Blog
My Blog

HT201269 could not see the iphone icon in my Dell computer

I have iphone4 and I could not see the iphone icon in my Dell computer when I connected with cable. In addition, it is showing that the MTP Driver is not installed properly in your computer. I wish to transfer iphone photos in to my computer. Please suggest me in this regard. thanks
<Subject Edited by Host>

Hi mallikb4u,
Welcome to the Apple Support Communities!
There are two separate steps you will need to take in this situation. The first thing I recommend you doing is following the first attached article to help you resolve your iPhone not showing in iTunes when connected.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Once you complete the steps listed above and you iPhone is showing in iTunes, I recommend reading over and using the instructions in the next article for importing photos from your iPhone to your computer.
iOS: Import personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/HT4083
Have a great day,
Joe

Bootcamp does not see replacement DVD drive in Mac Pro3,1

Recently purchased LG Super-Multi Drive - Mac Pro Kit 24X 5.25" Internal DVD/CD Writer from OWC and installed it in lower DVD drive according to the manuel provided including wire to Sata plug in Mac Pro3,1. A difference is that Top of 2 DVD ports has a faulty drawer door so I have removed the original Apple DVD device from it.
I now have DVD access/play using LG in Mountain Lion with bottom Drive but none at all in Boot Camped Windows 7 or 8 which do not see the SATA drive in lower drawer.
Wondering if there is any fix for this.

My Latest email back & forth with OWC:
My Mac Pro is 3,1 early 2008. My understanding before purchase was that it would work in Mt. Lion and Windows.
Is there anyone who knows how to make this work?
This is a very well known issue that was discovered shortly after the 2006 Mac Pro first shipped.
Sincerely,
OWC Andy

My iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?

Hello Friends,
I've two iPod Nanos (4th gen - 8GB). I'm facing a severe problem with both of them. For both iPods, I tried to do this method Simultaneously press the top button + home (central) button. But of no use.
1. My first iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?
2. My second iPod is facing more severe problem. None of the buttons are working. When I connect it my PC it showing "CONNECTED- eject before disconnecting". But it is not ejecting with all the usual methods. When I manually and physically disconnect it from the PC the same "CONNECTED- eject before disconnecting" is still showing till the battery goes off. After that if i press any button it is showing low battery signal. And when i re-connect it to the PC the same process is repeating. When I tied to restore it to the factory settings I'm getting "Error" report.
(I'm using windows 7)
Friends, Please help me with the above problems. It will be a great help.
Thank You.
R.SAMALA

Sounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
http://www.apple.com/support/ipod/service/prices/
B-rock

ITunes are not seeing my external drive as the library

Hi, I'm struggling to get music on my iPhone.
All our music is stored on an external hard drive that we use with our iPods. My wife and I recently got iPhones and we're trying to put some music on them.
iTunes is setup to get the music from the hard drive but for some reason I can not access it any more. My problem is that iTunes are not seeing my external drive as the library.
Here's how I've set my iTunes up:
Edit - Preferences - Advance
iTunes media folder location: J:\Lacie_iTunes (that's where the music is stored)
Now this worked perfect with our iPods but for some reason iTunes is not seeing the music anymore.
In iTunes, if I click on Library and then Music all I get is a screen to either download music (with tutorials) or import CD's (with tutorials).
I'm using iTunes 9 and Windows 7, the iTunes version on my wife's laptop is an older version but I do not think that that is the problem.
Any advice would be MUCH appreciated!

Setting the iTunes Media folder in preferences only moves the content to the external drive. The library database files will still be at the default location of ...\My Documents\My Music\iTunes. When you move the portable drive from one machine to the other you'll have access to the content, but not the database hence you get an empty library and the prompt to add some content.
See this recent post for pointers on how to rearrange the database & media folders so that everything is truly portable. I don't have time just now to rewrite the instructions for your specific drive & folder names but if it's not clear I'll pop by later and write them out again.
tt2

"Could not complete scan" error when using Windows Fax and Scan

"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
Motorbike

You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Could not load assembly or file "crystaldecisions.windows.forms"

Hi,
I have a VS2005 C# .net application which works fine when I run on the programming machine.
Now , I copy all files (dll , pdb , exe) from the Project's "..bin\Debug " directory .
These files I transfer to another computer which does not have VS 2005 .NET installed (or any separate crystal reports program), but it does have .netframework 1 and 2, so that I can test the application on that "test" computer.
When I double click the .exe , I log in and then I click a menu item which shows a form which has a crystalreport viewer in it.Here , an unhandled excepion error is shown like this...
Could not load assembly or file "crystaldecisions.windows.forms" version 10.2.3600.0
Note please: I have not created an installer(.msi) package for our application yet.
The application does not refer to any crystal reports dlls in it's directory
Thanks -

Hello Dimitar,
If Crystal Reports is not properly integrated into your VS IDE you'll usually see that kind of message.
You have to make sure that Crystal Reports is properly integrated into Visual Studios. Do you have a full version of Crystal Reports installed on your Visual Studios .NET 2005 development machine? If so, what is the version of Crystal Reports? Open Crystal Reports, go to the Help menu, and then About Crystal Reports. What is the version number and name (listed near the top)?
Now open Visual Studios and go to Help > About VS. In the list of Installed Products what does it say for Crystal (usually near the bottom of the list). Please DO NOT include your keycode - just what it says for Crystal.
Sincerely,
Dan Kelleher

Could not see Oracle ODBC driver in Windows ODBC

Similar Messages

Maybe you are looking for