Could query form and result table display at seperate pages

we are new at html db, there are a few of questions we need to clear before we make decision to use HTML DB to develop our next version of application: (I seperate them at differenct topics).
* Could query form and query result table display at differenct pages?
Thanks
Lei

yeah, this is surely possible...and quite easy. you'd just set your form page up as you'd like. put a button on that page with a branch to your report page. then have your report query refer to the items you defined on the form page. so if your form page had an item called P1_JOB and P1_DEPTNO you could have your report use those items with a query like...
select ename, job, sal, empno, deptno
from emp
where :P1_JOB = job
and :P1_DEPTNO = deptno
...hope this helps,
raj

Similar Messages

How to control selected row in result table on a search page?

Using JDeveloper 10.1.3.2.0
I have attempted to create an ADF page that contains a search and result table in the same page.
I have questions related to the result table. Let's say the result table shows 10 rows per page.
If I page forward there is no default selected row "clicked" on the page. Only if you return to
the very first 10 rows do you see a default selection in row number one of the results.
How would I go about making the first row of each page the default selection?

You'll need to code this into the RangeChangeEvent event of the table.
http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/doc/apidocs/oracle/adf/view/faces/component/core/data/CoreTable.html
That said - I'm not sure this will be very helpful for the end user - after all in any case they'll need to first select a row before doing an operation on it.

Unable to access Query Rules and Result Sources in SSA

I have access to our Search Service Application (SSA) within Central Administration. I am able to get to all of the options within Search Administration except for Query Rules and Result Sources. Does this require farm admin access or is there
something special that needs to be done for access to these two areas? I can get to all of the Diagnostics, Crawling, and the other Queries and Results options without issue. Our farm admin has been looking at it, but we have not been able to determine
why my access is not allowing me to get to those options. Any info you may have about this will be much appreciated.
Thanks!
Brian

Hi scalawagd,
This issue seems to be about permissions. Please add the user into the search service administrator group and give him full control, compare the result. You can try to give the user permission like the screenshot:
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Form on a Table with Report, 2 Pages

I have a view and i am using this to create a page as follows for insert/update/delete .
(1) create application from scratch
(2) on page 1 using wizard choice "Form on a Table with Report, 2 Pages"
(3) Follows the screens and create the 2 page where first page is a report and when i click on edit(in my case) it goes to next page for insert/update/delete.Everything like insert/update/delete works fine .
Now this view has say three columns
(1) element_type_id
(2) element_name
(3) yesnoflag
changing element_name and yesnoflag column is ok but then i need to have element_type_id corresponding to the element_name from some other table.
Question1
How should i get the element_type_id corresponding to the element_name .so when i create a new record it goes to page 2 and i can provide LOV for element_name and enter into yesnoflag, how can i get the element_type_id populated corresponding to the element_name entered.
Question2
Also in my application i have name element_type_id as primary key .I am not sure if thats a good idea or should i make element_name as primary key ?
please help.
Thanks,
Sachin

hey rui--
by "adjust your html", i simply meant that you should look at your page, think about the html that's being used, and adjust it as necessary to make your data wrap as desired. now that i'm pretty sure i understand your issue, i can tell you the adjustment. you're saying that your form shows your long column "correctly" with data broken up onto separate lines by carriage returns or linefeeds. when you display that same data in your report, those carriage returns ( chr(13) ) and/or linefeeds ( chr(10) ) aren't observed. that's because they don't mean much in regular html. two ways to approach this would be:
a) replace your carriage returns with explicit tags to get the breaks that you want...
select test_id, replace(test_description,chr(13)) test_desc from my_table;
b) wrap your column with <pre> tags to preserve all the original formatting of your data...
select test_id, '<pre>'||test_description||'</pre>' test_desc from my_table;
...and you could, of course, do option B in your report row template if you'd like.
hope this helps,
raj

When I am filling a form and have to go back a page the stuff I have inserted disappears. Someone told me to set "PRESERVE FORMS" in my browser. I looked but di

When I am filling a form and have to go back a page the stuff I have inserted disappears. Someone told me to set "PRESERVE FORMS" in my browser. I looked but did not find any likely adjustment. I have been in the habit pg taking a screen snip of my form details, but this is clumsy.
I received was:
" Enable Preserve Form Contents for your web browser. It's located in
different places for different browsers, and it should be enabled by
default. I'm guess it's not enabled on your system. It will keep all the
fields intact in a form such as the e-mail page if you have to click on Back. "

If possible then try to open that page in a new tab via a middle-click or Ctrl and left-click to avoid losing the current form.
Note that you can hold down the left mouse button on the toolbar Back button to open the tab history menu and that you can middle-click an entry to open that page in a new tab.

Query Panel and Result Component

hi All,
I'm using ADF BC, JDev 11G.
I have defined a View Criteria for a VO. I'm using the same as Query on a form. Once the data is found i would like to display the result on second page.
Meaning to say
Query panel is on page1, and results would be on Page2. Is this possible implementation in JDev11G and ADF. If yes, i would like to have some suggestions.
Can anybody help me display results of a query on a next page. I tried including the button as suggested. But that doesn't work, as the navigation fails on page1.
is any other implementation possible.
Thanks in Advance,
Jyothi
Edited by: JParsam on Aug 7, 2009 2:53 PM

Hi Jyothi,
Yes it is possible to implement in ADF11g.
Drag the viewcriteria from Datacontrol panel and drop on the page 1 and select Adf Query Panel
On page2 select ADF Table.
Place a button to navigate to the results page on page1.
Thats it, you can find the results on the second page
Thanks,
Morgan.

SAP QUERY LOOPS AND INTERNAL TABLE

Hi All, I have a query which i have made. It runs from Table EKPO which has PO details and what I want to do is now via ABAP Code pull through the total of goods receipt for the PO and Line Item into a field. Sounds Easy enough..Problem now,
The table which contains the GR data is EKBE which agains a PO and Line Item can have many 101 movements and 102 movements so what I want is an ABAP Statent to basically sum up the total of 101 for the PO & LINE ITEMS and then minus this from the total of 102 for the PO & LINE ITEMS and post the result in to this new field I have created.
I am pretty decent with ABAP Code in Querys I.e Select statements etc but from what I can see i need to create an internal table and do a loop and collect statement but I keep on failing due to not enough knowledge. Please can some one help me with this and provide me with the code and explanation as i would like to understand,
POINTS WILL BE REWARDED
Thanks
Kind Regards
Adeel Sarwar

Hi,
This is the full code i have entered but its not working. Any help would be appreciated. If you could rectify the code and internal tables that would be great.
Thanks
TABLES: EKBE.
DATA: PurO LIKE EKPO-EBELN,
      POLI LIKE EKPO-EBELP.
*New Table and Vars defined
DATA:   BEGIN OF IT_EKBE,
          IT_EKBE LIKE EKBE,
        END OF IT_EKBE.
DATA: BEGIN OF IT_SUM OCCURS 0,
          EBELN TYPE EBELN,
          EBELP TYPE EBELP,
          DMBTR TYPE DMBTR,
          MENGE TYPE MENGE,
      END OF IT_SUM.
CLEAR: QTYD.
MOVE: EKPO-EBELN TO PurO,
      EKPO-EBELP TO POLI.
SELECT * FROM EKBE INTO IT_EKBE
    WHERE EBELN = PurO
    AND   EBELP = POLI
    AND   BEWTP = 'E'
LOOP AT IT_EKBE.
MOVE CORRESPOING IT_EKBE TO IT_SUM.
IF IT_EKBE-BWART = '102'.
    IT_SUM-DMBTR = IT_SUM-DMBTR * -1.
    IT_SUM-MENGE = IT_SUM-MENGE * -1.
ENIDF.
COLLECT IT_SUM.
CLEAR IT_SUM.
ENDLOOP.
ENDSELECT.
If sy-subrc = 0.
QTYD = IT_SUM.
ELSE.
QTYD = 0.
ENDIF.

Query infotype and RT table

Hi experts!!
Is possible to do queries and get information from Infotypes and RT table in the same time.
We would like to do a query with information from infotypes an RT table, we don't want do a query for the data from infotypes and another one to get data from de rt table (PC00_M99_CWTR).
How is possible to do this kind os queries?
Kind regards,
Julian

To check on how to use cl_hr_pay_access class, I would first try google and then the where used list button while reviewing said class in se24 tcode - example of use: RPCGR1K0
DATA: pay_access TYPE REF TO cl_hr_pay_access. "access of payroll result
CREATE OBJECT pay_access.
CALL METHOD pay_access->read_cluster_dir
 EXPORTING
 pernr = pernr
 IMPORTING
 cluster_dir = rgdir[]
 EXCEPTIONS
 OTHERS = 4.
CALL METHOD pay_access->read_pa_result
 EXPORTING
 pernr = p_pernr
 period = p_rgdir
 molga = '07'
 IMPORTING
 payroll_result = pay_result
 EXCEPTIONS
 no_authorization = 1
 read_error = 2
 country_version_not_available = 3
 OTHERS = 4.
 CALL METHOD pay_access->read_pe_result
 EXPORTING
 pernr = p_pernr
 period = p_rgdir
 molga = '07'
 IMPORTING
 payroll_result = pay_result_person
 EXCEPTIONS
 no_authorization = 1
 read_error = 2
 country_version_not_available = 3
 no_person_data = 4
 OTHERS = 5.
result will be held in pay_result_person->inter deep structure
RT is inter-rt
BT is inter-bt
Or you can use function PYXX_READ_PAYROLL_RESULT - again - google or where used in se37 tcode. standard use in RPCDCI00
* FORM GET_PAYRESULT *
* read the internationl part of the payroll result from sequential *
* number I_SEQNR. *
form get_payresult using i_seqnr like pc261-seqnr
 changing cs_payxx_result type pay99_international.
field-symbols: <payxx_result> type pay99_international.
call function 'PYXX_READ_PAYROLL_RESULT'
 exporting
 employeenumber = pernr-pernr
 sequencenumber = i_seqnr
 changing
 payroll_result = <pay_result>
 exceptions
 illegal_isocode_or_clusterid = 1
 error_generating_import = 2
 import_mismatch_error = 3
 subpool_dir_full = 4
 no_read_authority = 5
 no_record_found = 6
 versions_do_not_match = 7
 error_reading_archive = 8
 error_reading_relid = 9
 others = 10.
if sy-subrc <> 0.
 case sy-subrc.
 when 5.
 perform error using c_er_payauth i_seqnr space
 space space c_yes.
 when others.
 perform error using c_er_readpay i_seqnr sy-subrc
 space space c_yes.
 endcase.
endif.
assign component 'INTER' of structure <pay_result>
 to <payxx_result>.
cs_payxx_result = <payxx_result>.
endform. " GET_PAYRESULT
Good luck.

Apex, Tabular forms and Nested Tables := Headache

Hi All,
I'm constructing an Apex aplication for Performance Reviewing staff and I have need of nested tables within each line item for ongoing comments during the year, the headings of which are drawn from another table, based on a template for which ones are to be used at any given time.
I'd like to be able to use a tabular form to draw out the history of comments at any given time and modify them however I'm at a complete loss as to how to get this working with a tabular form in Apex. If anyone could point me at some good documentation on the subject or even suggest a better method to get this done I'd be very grateful.
Thanks!

Hi,
Take a look at this article:
http://www.oracle-base.com/articles/misc/ObjectViewsAndNestedTables.php
First, create a view as described on your nested and other table(s), with 'Instead Of' triggers handling the DML. Next create the tabular form based on the view. You'll find many posts in the forum regarding building a tablular form based on a view.
Paul Brookes.

Query LOV and how to display the LOV back in the Text item.

Hi All,
I have got a big time problem in getting back my LOV value after Querying it.
Am using a Tabular Canvas having 10 rows and two columns, one having "Type"(as LOV) and corresponding "Type identifier".
My LOV is an non data block item, having the correct return type. When ever i search for a value in the LOV, its should give out all the "Type Identifier" list and the "Type".
But what i am facing is, am not able to get back the selected LOV after querying it and am getting the entire "Type Identifier' with out any filter.
In short my requirement is,
- I need to search an LOV,
- Display the LOV value in the "TYPE" field.
- Display the corresponding "Type Identifiers'
Pls note: Since am new to Oracle Forms, if in your replies, if you specify to use any code in trigger, pls specify which trigger to use.
Thanks a lot in Advance... its bit urgent
Arun

Hi Dave
The requirement is suppose i have an Lov called OrgName is atatched to a column in which user will select the Ou Name from the list and internally the respective org_id will store into the database where the OU Name is available in the same data block but it is not database item . (Only org_id is database item)
Now if you query the same block i would expect the Ou Name should display .
Right now in my case it is not displaying anything into that column.
Hope u understood this time..Please let me know is there any trick?

SuPM - Data from SAP BW Query(Automatic) and Manual not displayed in KPI

Dear Forum,
I am also, currently working on a project implementing BO SuPM Version 1.0. Landscape is ECC -> BI -> SuPM dashboards.
I have created a KPI in SuPM dashboard.
Case 1 : Automatic data collection - This KPI is marked for Automatic data collection. So, maintained Scripts with Connectivity and SAP BW Query name. I save this KPI and include in a new report and Run it. There are no records displayed.
Case 2: Manual data collection - This KPI is marked for manual data collection. So, maintained values in SuPM portal itself. I save this KPI and include in a new report and Run it. There are no records displayed.
Could you please help me how KPI in SuPM be filled manually and automatically ( from BW Query)?
Thanks,
Best Regards
PhaniRaj

Dear Phani,
First of All, you should have a framework created and assign the Core KPI to that framework and specify the frequency of the framework (Say Monthly) and Activate it.
Upon Activation, if it is a Manual Data Collection, then you should perform Role Assignment ie specifyinfwho would be the Business Contributor & Approver for ur Manual KPI.
After this, you have to run this program [/SRCORE/DATAREQUEST] in SE38 in the backend system which wil create a data request,
Later you should login as Business Contributor and go to MY Data Requests and then provide the data for the Month specified. Then login as Approver and under Approvals option, you should Approve the data. Now, you should go to SuPM application and select that Month in the dimension and KPI and then RUN the Report.
For Automated Data Collection, you should have to initially creata a Query (SAP/ BW) and specify the name of the query in SPRO--> Sustainability Performance Management --> Automated Data Collection --> Maintain Queries (SAP/ BW) --> Specify that Query name and the Connector ID (SM59).
Now go for KPI creation and specify the Query name in the KPI and then Assign the KPI to the framework and activate it.
Upon Activation, You should RUN the program /SRCORE/AUTO_DATA_COLLECT. Now, select this KPI in the report and RUN the report.
If you perform these actions, you will get the values in the report.
It can be checked in the backend application, either by checking the Process chain[RSPC] or by checking the Infocube if the data is loaded into the Infocube or not.
Let me know if you face any problems...
Regards,
Raghu

Link to query Form and auto-execute

What is the secret after creating a link from a report for example, to not only pass the link parameter to a query form, but to cause the form to execute the query.
Currently my query form shows the passed parameter but doesn't auto-execute..

This is exactly the same question I have and there are lots of similar questions in this forum. None of them have replies. Is this question still unanswerable?

How do I colour the background on my form and add a header to each page

I have created a 4 page form. HI want to have each page a light cream but can not finure out how to add colour and I want the header to show on each page. Any ideas?

Hi DouglasReid,
Please try the steps mentioned below to add color and headed and footer.
Once you are in the design view,
1) Click on the Option >Click to Add Header to add Header.
2) Click on forms setup to change to color of the form.
Thanks,
Vikrantt Singh

Query Performance and Result Set Query/Sub-Query

Hi,
I have an infoset with as many as 15 joins with different ODS and Master Data..The ODS are quite huge with 20 million, 160 million records)...Its taking a lot of time even for a few days and need to get atleast 3 months data in a reasonable amount of time....
Could anyone please tell me whether Sub-Query or Result Set Query have to be written against the same InfoProvider (Cube, Infoset, etc)...or they can be used in queries
on different infoprovider...
Please suggest...Thanks in Advance.
Regards
Anil

Hi Bhanu,
Needed some help defining the Precalculated Value Set as I wasnt succesful....
Please suggest answers if possible for the questions below
1) Can I use Filter Criteria for restricting the value set for the characteristic when I Define a Query on an ODS. When i tried this it gave me errors as below ..
"System error in program CL_RSR_REQUEST and form EXECUTE_VTABLE:COB_PRO_GET_ALWAYS.... Error when filling value set DELIVERY..
Job cancelled after system exception ERROR_MESSAGE"
2) Can I create a create a Value Set predefined on an Infoset - Not Succesful as Infoset have names such as "InfosetName_F000232" and cannot find the characteristic in Paramter Tab for Value Set in Reprting Agent.
3) How does the precalculated value Set variable help if I am not using any Filtering Criteria and is storing the List of all values for the Variable from the ODS which consists of 20 millio records.
Thanks for your help.
Kind Regards
Anil

I have Two forms and one table

Dears,
          i created two custom forms on EBS ( Oracle Forms Version : 10.1.2.3.0 ) "Form1 , Form2" from oracle template form
reading and inserting in same table , in inserting mode everything is okay for form1 , form2
in form1 i inserted records 1,2,3 AND in form2 i inserted records 4,5,6
so when i query in form1 about records 4,5,6 there is no data found and the same in form2 cannot query for records 1,2,3
Any suggests ?!
Kindly Suggest,
Best Regards.

Hi,
below is the code i am using
-- Begin default relation declare section
DECLARE
Dummy_Define CHAR(1);
-- Begin XXLOC_LINE_DTL detail declare section
CURSOR XXLOC_LINE_DTL_cur IS
    SELECT 1 FROM XXLOC_LINE_DTL X
    WHERE X.PROJECT_ID = :CTRL_BLK.PROJECT_ID;
-- End XXLOC_LINE_DTL detail declare section
-- End default relation declare section
-- Begin default relation program section
BEGIN
-- Begin XXXLOC_LINE_DTL detail program section
OPEN XXLOC_LINE_DTL_cur;
FETCH XXLOC_LINE_DTL_cur INTO Dummy_Define;
IF ( XXLOC_LINE_DTL_cur%found ) THEN
    Message('Cannot delete master record when matching detail records exist.');
    CLOSE XXLOC_LINE_DTL_cur;
    RAISE Form_Trigger_Failure;
END IF;
CLOSE XXLOC_LINE_DTL_cur;
-- End XXLOC_LINE_DTL detail program section
END;
-- End default relation program section
--

Could query form and result table display at seperate pages

Similar Messages

Maybe you are looking for