Could you please check this code
Hi There,
The scenario here is :
I have written this piece of code but its not showing desired result .I think the problem is in the AVGRANGE.
Please look into this and let me know if I am doing anything wrong.
I need to accomplish this task ,if employee E1 & E2 are in Entity1 in Grade S in forecast1 and now in forecast 2 a new employee namely E3 has come in this new forecast and whether he belongs to same entity can be identified by a new account say "F",If "F" is present for that Employee in that particular entity means he belongs to that Entity .Then I need to calculate.
"P" value for E3 for a month=Avg of "P" value for E1 & E2 in Entity1 in Grade S for that month.
I think this code is calculating for invalid combination also.
FIX (&CurrFctScenario,&CurrFctVersion,&CurrYear)
FIX (&SeedCurrency)
FIX(@descendatns("Entity"),@descendatns(GRADE),@Descendants(Employee)
FIX (&CurrMonth:"MAY"
, &SeedHSP
"P"(
IF ( "F"!=#Missing AND "P"==#Missing)
@AVGRANGE(SKIPNONE,"P",@children(Employee)->@currmbr(Grade)->@currmbr(entity));
ENDIF;
ENDFIX
ENDFIX
One more thing as I am testing this code for say two three employees then its working fine but as I am uisng @children(Employee) then I am getting error message
Error: 1012704 Dynamic Calc processor cannot lock more than [200] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
Is there any other way of doing this calculation?
Edited by: user10760185 on Jun 1, 2011 5:35 AM
Thanks a lot Alp...
Please find the logic of the calculation below:
In forecast1,here E1=employee,S1=Grade,P1=Account member
E1->S1->Entity1->P1= 100
E2->S1->Entity1->P1=200
In forecast2,E3,a new employee has come and if he/she belongs to S1 and Entity1 ,then the value should be
If (E3->F!->@currmbr(grade)->@currmbr(entity)=#Missing AND P1==#Missing)
E3->S1->Entity1->P1= (100+200)/2
I will read the document and will check my cache settings.
Edited by: user10760185 on Jun 1, 2011 11:36 PM
Similar Messages
-
Could you please let me know about the above as i need to transfer files urgently. Have tried to resend again but to no avail.
Hi stephena,
I have checked your account; there are no recent orders under the email address that you use here in the forums. So, I'm wondering if you may have signed up using a different email address, or signed up for a subscription via a Reader mobile app? For the latter, those subscriptions are handled by the app store from which you made the purchase, so Adobe wouldn't have record of those.
Best,
Sara -
Could you please check this for me?
This application only runs on some computers. I can run it, but on my parents (who only have the 1.3.1_02 plug in, or something like that) the printing does not work. I keep getting exceptions when I try to print. Otherwise it works fine on mine. The exceptions (if any) are stored in a file called "Error.txt." Note: to test the printing you need to make a new listing. :-)
You can download this application here:
http://www.angelfire.com/ok5/java/AddressBook.zip
Thank you. Please tell me what you think of it if it works, by replying to this message. If you like this program you can by it for $2.00 (I need money for java books ;o) ).
Thank you all.
Joshuait printed! both the address and full listing.
-
Hello, Could you Please check my iPhone's warranty?
Hello, Could you Please check Apple’s 90-day service limited warranty?
It was repaired on 19-Dec-12, but it hasn't extended warranty.
Thanks.This is a user-to-user techcnical support forum. You're not addresing Apple here. Use the Contact Us link at the bottom right of every page for more information on how to contact Apple. You can also get more information on the main Support page:
http://www.apple.com/support -
Could you please answer this questions ?
could you please answer this questions ......
2. What can you do with the DBMS_LOB package?
A. Use the DBMS_LOB.WRITE procedure to write data to a BFILE.
B. Use the DBMS_LOB.BFILENAME function to locate an external BFILE.
C. Use the DBMS_LOB.FILEEXISTS function to find the location of a BFILE.
D. Use the DBMS_LOB.FILECLOSE procedure to close the file being accessed.
3. Which two statements about packages are true? (Choose two)
A. Packages can be nested.
B. You can pass parameters to packages.
C. A package is loaded into memory each time it is invoked.
D. The contents of packages can be shared by many applications.
E. You can achieve information hiding by making package constructs private.
4. Which three are true statements about dependent objects? (Choose three)
A. Invalid objects cannot be described.
B. An object with status of invalid cannot be a referenced object.
C. The Oracle server automatically records dependencies among objects.
D. All schema objects have a status that is recorded in the data dictionary.
E. You can view whether an object is valid or invalid in the USER_STATUS data dictionary view.
F. You can view whether an object is valid or invalid in the USER_OBJECTS data dictionary view.
5. You need to create a stored procedure, which deletes rows from a table. The name of the table from which the rows are to be deleted is unknown until run time. Which method do you implement while creating such a procedure?
A. Use SQL command delete in the procedure to delete the rows.
B. Use DBMS_SQL packaged routines in the procedure to delete the rows.
C. Use DBMS_DML packaged routines in the procedure to delete the rows.
D. Use DBMSDELETE packaged routines in the procedure to delete the rows.
E. You cannot have a delete statement without providing a table name before compile time.
6. You need to drop a table from within a stored procedure. How do you implement this?
A. You cannot drop a table from a stored procedure.
B. Use the DROP command in the procedure to drop the table.
C. Use the DBMS_DDL packaged routines in the procedure to drop the table.
D. Use the DBMS_SQL packaged routines in the procedure to drop the table.
E. Use the DBMS_DROP packaged routines in the procedure to drop the table.
7. When using a packaged function in a query, what is true?
A. The COMMIT and ROLLBACK commands are allowed in the packaged function.
B. You cannot use packaged functions in a query statement.
C. The packaged function cannot execute an INSERT, UPDATE, or DELETE statement against the table that is being queried.
D. The packaged function can execute and INSERT, UPDATE, or DELETE statement against the table that is being queried if it is used in a subquery.
E. The packaged function can execute an INSERT, UPDATEM or DELETE statement against the table that is being queried if the pragma RESTRICT REFERENCE is used.It should be good if you try yourself by training your brain to solve these questions and then share them with us to get more help or advice
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com -
I tried to down load season 1 of swamp people and it is showing I purchased season 2 of swamp people could you please remove this off my account.
Sounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
http://www.apple.com/support/ipod/service/prices/
B-rock -
Could you please stop this abo?
Could you please stop this abonnement? my email is: [email protected] and I´m from germany. So if you read this, please stop this abo! thank you very much.
We can't do this via the forum. You need to contact Customer Support.
https://www.acrobat.com/misc/en/contact-support.html -
Could someone please check my code
I really do not know whether this code is booking the appointment or not!
The table in the database is apptNo INTEGER PRIMARY KEY NOT NULL AUTO_INCREMENT, doctorNo INTEGER NOT NULL, time INTEGER NOT NULL, date DATE NOT NULL, patient_userID INTEGER NOT NULL,
dateBooked TIMESTAMP NOT NULL);
Is this completely wrong, its supposed to check the date and time entered in the form, and if they equal a date and time already stored in the database then it should return false, however i am unaware of how to write this code so u can check against different doctor's availabilities.
Does this mean i need an availability table?
BOOKAPPT.JSP
<%@ page language="java"
import="java.sql.*, java.io.*, java.util.*, connection.*"
errorPage="error.jsp" %>
<jsp:useBean id="myconn" class="connection.cmhconn"/>
<html>
<head>
<title>Appointment Booked</title>
</head>
<body>
<% if(date == "date")&&(time == "time")
return false;
%>
<p><b><font size="4">Unable to book Appointment please choose another, date and time!</font></b></p>
<%
}else
myconn.connect();
String date = request.getParameter("apptdate");
int time = Integer.parseInt(request.getParameter("appttime"));
myconn.BookAppt(date, time);
myconn.disconnect();
myconn.connect();
int doctorNo = Integer.parseInt(request.getParameter("doctorNo"));
String dateBooked = request.getParameter("date");
myconn.addAppointment(doctorNo, dateBooked);
myconn.disconnect();
%>
Your Appointment has been booked!
<%
%>
</body>
</html>
The bean methods are here:
public ResultSet viewAppointment() throws SQLException, Exception
ResultSet result = null;
try
String queryString = ("SELECT * FROM appointment;");
Statement statement = con.createStatement();
result =statement.executeQuery(queryString);
catch (SQLException sqle)
error = "SQLException: Could not execute query.";
throw new SQLException(error);
catch (Exception e)
error = "Exception: An Exception occured while retrieving user data.";
throw new Exception(error);
return result;
public void addAppointment(int apptNo, int doctorNo, int time, String date, int patient_userID, String dateBooked)
throws SQLException, Exception
if (con != null)
try
PreparedStatement updateAppointment;
updateAppointment = con.prepareStatement("insert into appointment values('', ?, ?, ?, ?, ?);");
updateAppointment.setInt(1, apptNo);
updateAppointment.setInt(2, doctorNo);
updateAppointment.setInt(3, time);
updateAppointment.setString(4, date);
updateAppointment.setString(5, dateBooked);
updateAppointment.setInt(6, patient_userID);
updateAppointment.execute();
catch (SQLException sqle)
error = "SQLException: Update failed, possible duplicate entry";
throw new SQLException(error);
}else
error = "Exception: Connection to databse was lost!";
throw new Exception(error);
public ResultSet viewBookAppt() throws SQLException, Exception
ResultSet result = null;
try
String queryString = ("SELECT date, time FROM appointment;");
Statement statement = con.createStatement();
result =statement.executeQuery(queryString);
catch (SQLException sqle)
error = "SQLException: Could not execute query.";
throw new SQLException(error);
catch (Exception e)
error = "Exception: An Exception occured while retrieving user data.";
throw new Exception(error);
return result;
Thanks in advancedthey are declared in the bean,
public ResultSet viewBookAppt() throws SQLException, Exception
ResultSet result = null;
try
String queryString = ("SELECT date, time FROM appointment;");
Statement statement = con.createStatement();
result =statement.executeQuery(queryString);
catch (SQLException sqle)
error = "SQLException: Could not execute query.";
throw new SQLException(error);
catch (Exception e)
error = "Exception: An Exception occured while retrieving user data.";
throw new Exception(error);
return result;
If this is wrong please tell me how to fix the erro
Thanks again -
Could someone please check this for
Hi there!
I need someone to do this quick check, so I don't have to install Vista in vain.
I mainly use MIDI interface for compositions and playback. So, could anyone please find a MIDI file with some FASTER parts, play it, and check if there are any dropouts or note misplacements?
It was the issue in all previous driver versions, so please, somebody check this for me will ya?
I have X-Fi Extreme Music.
ThanksHere is the link to 2 faster midi files... If you have Windows Vista, X-fi and new drivers, please listen to them and tell me do they sound good or bad. Are there any dropouts, or any other issues?
http://www.box.net/shared/2vxsohpagv
Thanks. -
Could you please answer this questions. experts
what is the use of cell editor?
what are the sequence of operations carried out when transpoting object?
why we use navigational attributes ?please elaboratehi..
navigational attrib:
From a system performance point of view, you should model an object on a characteristic rather than on a navigation attribute. The reasons for this are as follows:
· In the enhanced star schema of an InfoCube, navigation attributes lie one join further out than characteristics. This means that a query with a navigation attribute has to run an additional join (compared with a query with the same object as a characteristic) in order to arrive at the values. This is also true for ODS objects.
· For the same reason, in some situations, restrictions for particular values in the navigation attribute (values that have been defined in the query) are not taken into account by the database optimizer when run schedules are created. This can result in inefficient run schedules, particularly if the restrictions are very selective. In most cases, you can solve this problem by indexing the navigation attribute in the corresponding master data tables (see below.)
· If a navigation attribute is used in an aggregate, this aggregate has to be adjusted using a change run as soon as new values are loaded for the navigation attribute (when master data for the characteristic belonging to the navigation attribute is loaded.) This change run is usually one of the processes that are critical to the system performance of a production BW system. This is why, by avoiding using navigation attributes or not using navigation attributes in aggregates, you can improve the performance of this process. On the other hand, not using navigation attributes in aggregates can lead to poor query response times. The data modeler needs to find the right balance.
BEx Cell Editor: In queries with two structures, you can now reference cells at the intersections of rows and columns.
chk this link for transportation:
http://help.sap.com/saphelp_nw04/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/content.htm
hope it helps..
all the best... -
Hello
I have been charged two times???
Order AD002372485 and AD002372469, but I would like to cancel this please.
Is very confusing system for me.
Thanks
M LuizHello M Luiz,
please don't forget here we are users like you, not Adobe's employees. You have to contact Adobe's customerservice. Here some links about the terms of notice:
Adobe - Subscription Terms and Products One of them I could find only in German language:
https://store2.adobe.com/cfusion/store/html/index.cfm?event=displayProduct&categoryOID=696 9052&store=OLS-DE
and there I found (translated from german website):
After purchasing a subscription for Adobe ® ExportPDF the fee after each month (for a monthly subscription) or year is automatically drawn (for a annual subscription). You can terminate at any time your subscription on the page "My Account" under "Manage Subscriptions". To do this, click the option to terminate the contract in addition to the subscription in question. The subscription is then valid until the next due date for fees. After no more usage charges will be collected. If you want to set the service and your account with immediate effect, please contact the Adobe Customer Support Department.
https://store2.adobe.com/store/de/popup/software/acom/customer_service.html
Hans-Günter -
Could you please check if my mac has a spyware, please help.
Could please someone help me to see if there is anything unusual on this results done from Terminal in my mac. Thanks in advance.
giuseppes-mbp:~ giuseppe$ kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
com.avast.PacketForwarder (1.3)
com.avast.AvastFileShield (2.0.0)
giuseppes-mbp:~ giuseppe$
giuseppes-mbp:~ giuseppe$ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfi x|x)/{print $3}'
Password:
com.avast.regapp
com.avast.account
com.avast.fileshield
com.avast.proxy
com.avast.crashreport
com.avast.daemon
com.avast.uninstall
com.avast.init
giuseppes-mbp:~ giuseppe$ launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
com.google.Chrome.10768
com.avast.AAFM.31184
com.avast.helper
com.avast.userinit
com.google.keystone.user.agent
com.avast.home.userinit
giuseppes-mbp:~ giuseppe$
giuseppes-mbp:~ giuseppe$ ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
/Library/Components:
/Library/Extensions:
ATTOCelerityFC8.kext
ATTOExpressSASHBA2.kext
ATTOExpressSASRAID2.kext
ArcMSR.kext
CalDigitHDProDrv.kext
HighPointIOP.kext
HighPointRR.kext
PromiseSTEX.kext
SoftRAID.kext
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
AudioMixEngine.framework
NyxAudioAnalysis.framework
PluginManager.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
Default Browser.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.avast.userinit.plist
/Library/LaunchDaemons:
com.avast.init.plist
com.avast.uninstall.plist
/Library/PreferencePanes:
Avast.prefPane
/Library/PrivilegedHelperTools:
/Library/QuickLook:
GBQLGenerator.qlgenerator
iBooksAuthor.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
iBooksAuthor.mdimporter
iWork.mdimporter
/Library/StartupItems:
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Library/Keyboard Layouts:
Library/LaunchAgents:
com.avast.home.userinit.plist
com.google.keystone.agent.plist
Library/PreferencePanes:
Library/Services:
.localized
giuseppes-mbp:~ giuseppe$ osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
giuseppes-mbp:~ giuseppe$
giuseppes-mbp:~ giuseppe$ osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
giuseppes-mbp:~ giuseppe$ osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
giuseppes-mbp:~ giuseppe$ osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
giuseppes-mbp:~ giuseppe$ ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
/Library/Components:
/Library/Extensions:
ATTOCelerityFC8.kext
ATTOExpressSASHBA2.kext
ATTOExpressSASRAID2.kext
ArcMSR.kext
CalDigitHDProDrv.kext
HighPointIOP.kext
HighPointRR.kext
PromiseSTEX.kext
SoftRAID.kext
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
AudioMixEngine.framework
NyxAudioAnalysis.framework
PluginManager.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
Default Browser.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.avast.userinit.plist
/Library/LaunchDaemons:
com.avast.init.plist
com.avast.uninstall.plist
/Library/PreferencePanes:
Avast.prefPane
/Library/PrivilegedHelperTools:
/Library/QuickLook:
GBQLGenerator.qlgenerator
iBooksAuthor.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
iBooksAuthor.mdimporter
iWork.mdimporter
/Library/StartupItems:
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Library/Keyboard Layouts:
Library/LaunchAgents:
com.avast.home.userinit.plist
com.google.keystone.agent.plist
Library/PreferencePanes:
Library/Services:
.localized
giuseppes-mbp:~ giuseppe$
giuseppes-mbp:~ giuseppe$ osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
giuseppes-mbp:~ giuseppe$ osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
giuseppes-mbp:~ giuseppe$ ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
/Library/Components:
/Library/Extensions:
ATTOCelerityFC8.kext
ATTOExpressSASHBA2.kext
ATTOExpressSASRAID2.kext
ArcMSR.kext
CalDigitHDProDrv.kext
HighPointIOP.kext
HighPointRR.kext
PromiseSTEX.kext
SoftRAID.kext
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
AudioMixEngine.framework
NyxAudioAnalysis.framework
PluginManager.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
Default Browser.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.avast.userinit.plist
/Library/LaunchDaemons:
com.avast.init.plist
com.avast.uninstall.plist
/Library/PreferencePanes:
Avast.prefPane
/Library/PrivilegedHelperTools:
/Library/QuickLook:
GBQLGenerator.qlgenerator
iBooksAuthor.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
iBooksAuthor.mdimporter
iWork.mdimporter
/Library/StartupItems:
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Library/Keyboard Layouts:
Library/LaunchAgents:
com.avast.home.userinit.plist
com.google.keystone.agent.plist
Library/PreferencePanes:
Library/Services:
.localized
giuseppes-mbp:~ giuseppe$ osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
giuseppes-mbp:~ giuseppe$ osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
giuseppes-mbp:~ giuseppe$ osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
giuseppes-mbp:~ giuseppe$Do you suspect a problem because your machine is slow? Start by uninstalling Avast. It's probably causing your problem and you don't need AV software on a Mac.
-
Adobe, could you please make this forum even slower...
... so that I really have enough time to complete the post-processing of at least one image between two subsequent post loadings?.
Thanks in advance.--OB
-
Could you please visit this web page? I need to know if my applet works.
However on my parents computer just a blank white screen shows but I am told the applet has started. Is there a way I can have it show up on their computer too?
Also they get the same results when viewing Sun's applets. The address is:
http://www.angelfire.com/ok5/java/backgroundswing.html>look into jnlp/webstart may help
What is that? Anyway, I downloaded the plug-in. I had visited my site and dowloaded it. The computer's operating system I can't view it on is an ME. Does that make a difference? -
Could you please stop this spammer?
Begin forwarded message:
From: Christine M <***>
Date: 17. November 2012 16:50:00 MEZ
To: efrain18@***
Subject: Re:
Reply-To: ewurajee@***
<Emails Edited By Host>Apple must be selling information?
That's rather unlikely. The damage to Apple's reputation would be far costlier than the money they got for the address list. If it's not a randomly generated list of millions of @me.com addresses which has had a few successful 'hits', then perhaps hackers have managed to get a list from somewhere.
Maybe you are looking for
-
Follow up control action for Training and Event Management
Dear Expert, I am new to TEM module. After the training course, I would like to set the course result to each participant (pass or fail) I tried to set the "Follow-up control options" for the selected course type and then execute tcode pv15, but stil
-
How to prompt user to select multiple files in file dialog using scripts
Hi, is there a way to allow user to select multiple files inside the file dialog using scripts? So not just something like "*.ai" or "*.eps" but where the user can actually use their shift key to select a batch of files inside the file dialog and the
-
We are having trouble getting our new IPAD2 to charge. We have hooked it up to our computer and no charge, we have used the outlet and still no charge. When we first connect it to an outlet it shows the battery but it immediately goes off and it is s
-
Hi, I'm aware that this topis has been raised before, but I'm pretty close to going nuts, so my appologies for the re-post. I'm currently unable to install iTunes (latest version) due to a Bonjour-conflict "bonjour service failed to start". I have ad
-
Third Party replaced Motherboard under warrantee, did a great job. Serial Number issue
IdeaCentre B500 Serial Number is reflected in bios as not matching since the MB changed today. Is that going to cause any issues with future warrantee work (which I don't expect) and will it effect any other functions such as recovery is needed