Couldnt  fnd_profile.save for 2 profiles

Hi,
I couldnt save a value using fnd_profile.save for 2 profiles:
1). 'Initialization SQL Statement - Custom'
2). 'Initialization SQL Statement - Oracle'
IF NOT fnd_profile.save('Initialization SQL Statement - Custom',
'something',
'USER',
12478)
THEN dbms_output.put_line('cannt save');
commit;
Its always 'cannt save' at any level of profile (USER, APPL, SITE, RESP)
It works fine for other profiles. Cant understand whats the matter.
Thanx a lot;

Hi,
Can you change the values through System Profiles form?
PS. Note that the "Oracle" one is documented somewhere if I remember correctly as "do not touch".
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/

Similar Messages

  • Fnd_profile.save for setting APPS_FRAMEWORK_AGENT on server level

    Hi,
    i can set APPS_FRAMEWORK_AGENT on user level using " result := fnd_profile.save('APPS_FRAMEWORK_AGENT',URL,'USER',usr.user_id); "
    but this  "result := fnd_profile.save('APPS_FRAMEWORK_AGENT',URL,'SERVER',Node_id); " does not work for setting it on server level.
    Help from anyone will be much appreciated.
    Regards,
    Zafar

    What is the error you are getting when you try to set at server level?

  • For archiving photos, should I save sRGB ICC profile?

    Hi all.
    I have started scanning old print photographs for archive.
    I started a bunch of them, but now am pondering if whether or not I should save an ICC profile to the files.
    Basically I'm scanning in the photos at 600 dpi, and saving them as TIFF with NO compression and set to IBM PC.
    For the ICC profile option, it gives me sRGB IEC61966-2.1.
    Do I need to tick that when saving, or will the colors look fine in future computers/applications?
    I'm kinda confused on the ICC/sRGB matter even after reading about it. From what I understood it's only to display colors accurately for the Web.
    How does ICC/sRGB factor into my archival project?
    I'd greatly appreciate any feedback, tips and advice.
    Thank you.

    Yes, if you are archiving, save the document with it's profile.
    You don't need to convert to any particular profile (which could lose details), just save with the profile of the document.
    ICC defines a standard for describing document colors.  Without that information, your document is just numbers without any known appearance. With a profile, the document numbers have an unambiguous interpretation as colors.
    sRGB is just a profile that represents the average CRT as of 10+ years ago, and is sort of a standard average for web viewing on uncalibrated displays and web browsers that don't always obey profiles.

  • Preview options in the "save for web" dialog

    According to the reference, the previews in the "save for web" dialog are there only for showing how the image can be seen on various platforms with different gamma values.
    But, if we open a non-sRGB image (ProPhoto for example) by the "save for web" option, the preview options (other than the "use document profile) in the "save for web" dialog assign sRGB color space to the image even when the "convert to sRGB" option is unchecked ... this causes unrealistic, dull previews for the image.
    What is the reason behind that PS assigns sRGB to the image previews if we uncheck "convert to sRGB" option?

    Basically, how animation works with GIF and Save for Web in PSE is that each layer in your document is a frame of animation. So you see one layer, then the next, and so on. You should not see the contents of the last frame/layer when looking at the current/next frame of the animation.
    Could you post a screen shot of your layers panel and give us a link to the GIF that is coming out of Save for Web?

  • Possible bug in Save for Web -- Color Changes!

    Hi,
    I'm new to CS3 and also new on the Mac (and also to thiis forum). So I might be overlooking something but I am an experienced user user of Photoshop 7 on a pc. Never had a problem like this.
    When I try to save an image with the color #c51076 as a gif using the Save for Web function I get a totally different color. Much lighter!!! I don't get it. I can't get the color I want.
    I jjustt found out that iit also messes up webcolors: it swaps one webolorr for another.
    Does anyone know a solution?
    Thanks!

    Thanks for sharing. First let me say I think it's really great that you have shared all the documentation about these color issues. I read your page before posting here, and I tried each of the suggested solutions, and wasn't able to fix it. Maybe it is a problem with the Mac OS and the way it displays images non-color managed images. But it's not like all the images I view on Firefox are dull-just the ones I've edited, because they appeared different in CS3.
    As I mentioned above, I am not the only one who is having this problem, despite trying all of the fixes suggested (see the link to forum thread posted above). I think my next step is to schlep my MacBook over to the Mac store and see if they can verify my monitor profile. But if anyone else has any suggestions, please let me know!
    Emily

  • Color management in Save for Web not working

    The Save for Web dialog box in the CS6 Beta is ignoring color profiles, so color is not managed. This has not been a problem in previous versions.

    The saved output is just fine. I was referring to the images in the Save for Web dialogue
    I just checked my settings. CS6 apparently changed my Preview setting from "Use Document Profile" to "Monitor Color." It also changed my Metadata setting. It should not do that!
    Restoring the correct Preview setting solved the color management problem, but ONLY for the Preview image. The Original image is still not color managed.
    I'm on a wide-gamut monitor, so sRGB images come out looking garish if there's no color profile embedded or it's ignored. That's what's happening here with the Original image in Save for Web. I imported an sRGB image with profile embedded, and it looks just fine in Photoshop while editing. Then I went to Save for Web, with the settings Embed Color Profile, Convert to sRGB, and Preview: Use Document Profile. The JPEG preview too looks just fine with these settings, but the Original looks garish, showing a lack of color management. The color in the two views is showing as completely different, though they both represent the same image with the same color profile embedded.
    Going back to CS5, the same image is properly color managed in both Original and Preview. Both images show identical color, as they should.

  • Filesize displaying in "save for web..." is inaccurate in Photoshop CS6

    Hi,
    I was trying to save an image below 60kb as a jpg in "save for web...".
    I manage to do so in the "optimized" window panel by reducing the quality image to 55 (the panel on the right side)
    Optimized was checked.
    On the left side, below the image I can see it was written JPEG/ 57.39 K
    When I saved into my MAC, my file was 60kb...unlike what it was said in the "save for web..." panel.
    Anyone can tell me how is possible to save exactly below 60kb? or the software has an actual problem showing the incorrect filesize.
    Thank you.

    It might be that it's an estimate of the image. You have metadata that may be saved with it.
    I uncheck "Embed Color Profile" and I set the Metadata to "none"
    See if that makes any difference.
    Gene

  • Loss of saturation in Save for Web

    Hi,
    Objects that I export as PNG24 files using Illustrator's "Save for Web" feature result in files that a considerably less saturated than they appear in the Illustrator file (I'm working in RGB).
    What's up? Is there a quick/easy way to make sure the raster files look just as saturated at the Illustrator objects?
    Thanks!

    calibrate and profile your monitor to the Web standard 2.2 gamma, not the Apple default of 1.8.
    create your Web artwork in the sRGB color space (not Adobe RGB)
    Save for Web.
    You may still see some color shift when you save the image with no profile, but the above steps should minimize it.

  • A different take on the "Save For Web" color shift issue...

    Ok, everyone who has fussed much with photoshop and "Save For Web" knows about the color shift issue. If you want your colors to look right after you "save for web", you have to work in the sRGB colorspace, and have Proof Colors checked (soft proofing on) and the proof color setup set to Monitor RGB, otherwise what you get looks terrible when displayed in a browser.
    But of course if you are editing for print, this is exactly what you DON'T want to do. Well, I work in both. In fact, often the same images, and I want them to appear as close as reasonably possible in both print and web formats, and without a lot of fussing on my part. And I'm pickiest about the print mode, since I have the most control there, so that's the way I want to edit by default.
    Nothing new here.
    Now comes the interesting part (in my mind, anyway). Obviously there is a known remapping -- because PhotoShop DOES it when you select Proof Colors. So the inverse mapping must also be known (with some gamut issues, but I'm not concerned with those, because, after all, I'm VIEWING it on a monitor anyway!). What I want is a plug-in that automatically applies that inverse mapping so that, when I do a Save For Web, I end up with the colors I've been viewing all the time when setting the shot up in print mode. Then, too, I don't have to worry about what mode I'm in when I'm editing -- it just fixes it when doing a save-for-web.
    Again, I want to edit in my normal print mode (typically ProPhoto colorspace, and with soft-proofing off or set to the printer/medium combination I expect to use), then do a single operation (might be a multi-step action) to "screw up" my colors so that when I then do a "Save-For-Web", the resulting image, when viewed on the average color-stupid browser, looks like the image I've been seeing in Photoshop.
    Anyone know of such a beast?   I would gladly pay for a plug-in that really works and fixes the problem.
    And if you have other solutions, I'm interested, but the absolute requirement is that it I do one single edit pass for my colors for both print and web use, and I get what I see on the screen in PS on both the prints and on the web display (i.e., working in sRGB/Monitor RGB mode all the time won't cut it). And PREFERABLY, let me do all my editing work in the ProPhoto (or at least AdobeRGB) colorspace so I have a gamut closer to what the printer can do.
    Anyone got a decent solution for this?

    Sorry, I think I'm being unclear.  This has nothing to do with individual monitor profiles.  In Proof Setup, "Monitor RGB" amounts to turning off ALL color management, and simply letting the monitor do what it will.  It is what the vast majority of web browsers do (even if the operating system provides color management, the browsers don't take advantage of it), so that is what you need to consider for images that will be viewed on a web browser.  If you convert your image to sRGB,  select Monitor RGB in Proof Set up, and turn on Proof Colors, you will see the image as it would appear on a web browser (after you save it as a jpg or use "Save For Web/Devices" to save it as a jpg).   Since almost everyone is running different uncalibrated monitors, there will be lots of variation in how it will look to them, so precise control of the color is unimportant.
    That said, I would expect the color on a calibrated monitor (such as the one I use when editing) to be reasonably close to the colors I am seeing while editing in PS.  To the extent a monitor deviates from "calibrated", those colors will vary, but a good monitor should show good colors.   Unfortunately, this is NOT the case, as my previous post shows.  The colors produced by the steps above are oversaturated and significantly shifted in hue.  There is, to my mind, anyway, no reason for this.  Adobe clearly knows what the mapping is between the colors as it displays them in PS and the un-controlled "Monitor RGB" -- that is, it is the color map they are using during normal editing display.  If they were to reverse-apply that map prior to saving it as a jpg, then the image would appear on a browser on that same (presumably calibrated) monitor very similar to what you set up when editing.  Anyone else viewing the image on a web browser with a calibrated monitor would also see good colors.  To the extent other viewers' monitors are out of calibration, their colors will suck, but there's nothing you can do about that.
    I guess in some sense I AM "asking for a Color-Mamangement-solution for a "non-Color-Management-situation", but specifically I'm asking for PS Color Management to do the best it can for non-Color-Managed situations that we all face every day.
    Does that make more sense?

  • I am using photoshop cc 2014.2 And when I use save for Web it gives me a dialog box that says it is using Latin characters I've never seen this before. Does anyone have an answer for this problem or do I need to go back to the older version of Photoshop.

    I'm using Photoshop cc 2014.21 I you save for Web and dialog box comes up that says that Photoshop is using Latin characters and that servers cannot recognize Latin characters in webpages and you may have trouble viewing these pages does anyone have an answer for this problem?

    What Firefox version is currently installed on the computer?
    You can find the full version of the current current Firefox release (37.0.2) in all languages and all operating systems here:
    *https://www.mozilla.org/en-US/firefox/all/
    If you have a very old Firefox version then you could consider to uninstall that version to clean up existing registry keys (especial the uninstall key).
    Make sure NOT to remove "personal data" when you uninstall Firefox, because that will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
    Check the Firefox program folder and remove the Firefox program folder if there are still files left in it.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Save for Web... and grayscale images

    I noticed a strange behavior when I use "Save for Web and Devices" on scanned BW negatives...
    I import the negatives via the scanner's twain driver in Photoshop as 16bit grayscale images. My grayscale working space is normally set to the default DotGain 20% profile. When I want to show these images on the web, I use "Save for Web and Devices..." and I have selected the convert to sRGB option. For some reason, the "embed color profile" option is disabled (grayed out) when the document is in grayscale mode.
    When I view the the exported image (in a color managed application or browser) it looks too dark and shadow detail is lost. Examining the file info shows that the JPG file is in RGB color space and has the sRGB profile assigned.
    When I convert the image to RGB mode before I do save for web... the exported image will look exactly like it looked in Photoshop. Also, the mode change doesn't cause a change in appearance. Also, after changing to RGB, the "embed color profile" option in save for web... becomes enabled.
    I experimented with other working color spaces and noticed that an image exported from a grayscale image in "GrayGamma 2.2" working color space will display almost like an image that was exported from a grayscale image converted to RGB.
    I would like to understand this behavior and whether it is correct. My assumption would be that a conversion to sRGB during the export should yield the same result like a manual conversion of the image in photoshop but for some reason the results are quite different.
    How can I export my grayscale images to sRGB JPG without having to convert to RGB manually while preserving the tonality from the original image?
    I have attached an image which I hope might illustrate the effect I'm describing. The crop on left hand side looks as expected and is the result of exporting from an image that was converted from grayscale to RGB mode (sRGB working space) before using save for web...
    The image in the middle is the result from converting to GrayGamma 2.2 color space but leaving the image in grayscale mode before saving for web and devices. It is almost identical to the crop on the left. The crop on the right hand side is the result of using save for web and devices from the original image in grayscale mode with the default DotGain 20% profile.
    Thanks
    /lars

    These are my settings. Are they the same in your SFW dialog?

  • Save for web color shift - only on images smaller than 150x150px

    I'm getting a color shift only on small images (150x150px or smaller) when I save for web in Photoshop CC and CS6. That's very weird as it doesn't happen to images larger than 150x150px! That issue happens with images with different measurements as well (e.g. rectangle), the small looks dull and the larger display the right color.
    My Color Settings are set to "Monitor Color". Under save for web I have the following options not ticked: Embed Color Profile and Convert to sRGB. (viget.com/inspire/the-mysterious-save-for-web-color-shift)
    I'm running the OS X 10.8.4 on a macbook pro, I tested that on both, Safari 6.0.5 and FF.
    The squares in the screenshot were saved exatly the same way. The largerer displays the right color #FFCB32, but the smaller displays the color wrong.
    I appreciate your help.
    Cheers
    P

    JPG & PNG = Color Profile "Don't Color Manage this document". Save under save for web I have the following options not ticked: Embed Color Profile and Convert to sRGB. (viget.com/inspire/the-mysterious-save-for-web-color-shift)
    Resizing in photoshop (Image Size), but the color shifts even with cropped image after save for web.

  • Save For Web - Default Output Settings

    Hi all!
    When I use "Save For Web" in Illustrator CS5, I don't like having hypens in my file names (it messes with alphabetical sorting when some of my similarly-named files have hypens, the rest have spaces). So everytime I export an image for the first time using save for web, I have to go into "output settings > saving files" and uncheck "Unix Filename Compatibility". Having to do this every time is a little annoying.
    I tried unchecking that box, and then saving the output settings as a settings profile, overwritting "default settings.iros", hoping that Illustrator would load that file everytime and leave the Unix box unchecked. But alas, that did not work, and when I go to "Save For Web" now on a new image, instead of using the default settings profile, it just uses "Custom" instead, with the Unix box checked.
    So it seems Illustrator would rather use it's own default settings, instead of mine. Is there any way I can set it to stop checking that box every time I create a new image and export it for the first time?
    Thanks!
    Joey

    You are correct it is writtn that way in the Save for the Web Preferences and I assume if you knew what to put in its palce and resaved the preferences it ould 'no loo'nger be a problem for you the thing is what would you write in its place?
    At the bottom it saays name compat

  • Save for web&.... the image exceeds the size for ....issue with AI on imac i7

    Hi,
    I just upgraded from using macbook Pro to Imac inte core i7 with 4GB. I use illustrator CS3 for high resolution documents i.e saving a Design for say maybe saving for iphone &ipod skin; a quality jpg that is 1300px(width) by 2000px(height.
    General information
    The issue is I keep getting the pop up with:
    The image exceeds the size Save for Web was designed for. You may experience out of memory erros and slow performance. Are you sure you want to continue?
    I click yes, but get another pop up with:
    Could not complete this operation. The rastarized image exceeded the maximum bounds for save for web.
    And last weekend after NOT being able to save anything I went and bought 16GB memory thinking that this ussue would be solved, but nada.
    I have researched around here and google only to find about scratch disk: went to preferences then to plug-ins and scratch Disks -I seem NOT to get to the bottom of this at all.
    And this morning I was trying to create a pattern Design and could not even get the design on the color swatches as I have done before with macbook pro with 4GB -IT'S NOT FUN, because I am NOT doing it right. Do you care to help me out?
    Thanks a whole bunch in advance
    //VfromB

    Are you including a color profile?  What metadata are you including with it?
    How many pixels (h x v)?
    50 kb is not all that big.  Does your image have a lot of detail in it?  Content can affect final compressed size.
    -Noel

  • Colour issue with 'Save for Web' - Photoshop Elements 6 (Mac)

    Cross posted here, but no answer so far. Sorry for cross posting. For me, this is urgent, but I know it's not for anyone else, so apologies for putting 'urgent'.
    http://www.mac-forums.com/forums/images-graphic-design-digital-photography/150670-colour-i ssue-save-web-photoshop-elements-6-a.html#post840419
    This is a similar issue to this:
    Save for web color issue
    Except the user who posted the above was using photoshop cs3, and I'm using Adobe Photoshop Elements 6.
    When I work on a photo, I get it just right, then go to Save for Web, and the original it previews is loads lighter than the orginal I was working on in the first place. See 'Picture 1' attachment.
    I have changed the colour settings on the Save for Web options - I've chosen each one in turn, and none fix the problem.
    There seems to be no similar option in PSE6 to this that fixed it in CS3:
    IN the save for web box there is a small round button with an arrow in it (near the Done button).
    In the list when this button is pressed deselect Convert to sRGB
    I used to use PSE2 on a PC, and never had this problem. I didn't need to mess about with colour profiles or anything similar on the PC. The original was the original, not a washed out version of the original. Why spend ages getting the file just right, only for Save for Web to screw it up?
    Any advice to fix this would be much appreciated.
    Thanks

    Thanks very much for your reply.
    I've uploaded the images here:
    http://jimpix.co.uk/images/Picture 1.jpg
    http://jimpix.co.uk/images/Picture 2.png
    I deleted the prefs. file you suggested, and then opened PSE6.
    I then tried the profile setting you suggested - but it's not an option:
    http://jimpix.co.uk/images/Picture 3.png
    I tried 'remove profile' just in case that worked, but the same effect happens on Save for Web.
    Not sure what to try next!
    Thanks

Maybe you are looking for