Count distinct rows from an internal table

Hi,
i have an internal table containing pairs of entries like
1       1
1       2
1       3
2       1
2       2
What i want to do is to determine the value of rowcount from first column ( here it would be 2 and not 5 ) - to me it seems like a DISTINCT. Any suggestions for that ?
Clemens

Hi clemens,
1. One of the ways is to use COLLECT.
2. suppose your original internal table is ITAB.
   Create one more with just one field
    STAB eg.
3. Loop at ITAB.
    STAB-field1 = ITAB-Field1.
    COLLECT stab.
    ENDLOOP.
4. In stab u will have only TWO records,
    1
   2
regards,
amit m.

Similar Messages

Distinct values from dynamic internal tabls

Hi All,
I have a dynamic internal tables like <dy_table> , i want to get distinct values from this internal tables,
how to do that, structure of dynamic internal tables is dynamic acc. to user conditions.
regards,
Anuj

Hi Anuj
Just try this,
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = tb_fields_for_it
IMPORTING
ep_table = gp_dyn_table.
ASSIGN gp_dyn_table->* TO <gt_table>.
ASSIGN LOCAL COPY OF INITIAL LINE OF <gt_table> TO <fs_table>.
LOOP AT tb_output.
*To assign value for serial number.
ASSIGN COMPONENT 1 OF STRUCTURE <fs_table> TO <ls_field>.
<ls_field> = tb_output-sno.
UNASSIGN <ls_field>.
*To assign value for Sales Organization.
ASSIGN COMPONENT 2 OF STRUCTURE <fs_table> TO <ls_field>.
<ls_field> = tb_output-vkorg.
UNASSIGN <ls_field>.
*To assign Rate for its respective Condition type.
LOOP AT tb_konp WHERE knumh = tb_output-knumh.
READ TABLE tb_fieldcat1 WITH KEY fieldname = tb_output-kschl.
IF sy-subrc EQ 0.
lv_count = tb_fieldcat1-col_pos.
ASSIGN COMPONENT lv_count OF STRUCTURE <fs_table> TO <ls_field>.
IF tb_konp-konwa EQ '%'.
tb_konp-kbetr = tb_konp-kbetr / co_10.
<ls_field> = tb_konp-kbetr.
ELSE.
<ls_field> = tb_konp-kbetr.
ENDIF.
ENDIF.
ENDLOOP.
lv_count = lv_count + 1.
APPEND <fs_table> TO <gt_table>.
CLEAR <fs_table>.
ENDLOOP.
Hope this proves helpful to you.

How do I select a range of rows from an internal table in the debugger?

Hi,
I have a case where I wanted to delete a range of rows (several thousand) from an internal table using the debugger.
It seems that rows can only be selected one at a time by selecting (clicking) on the far left side of the row.
This is cumbersome, if not impossible when wishing to delete several thousand rows.
Other tools, such as Excel for example, allow for selecting a range of rows by selecting the first row and then holding the SHIFT key and selecting the last row and all rows in between will be selected.
I can't seem to find the combination of keys that will allow this in the table (or structure) tab of the debugger.
Is it possible to select a range of rows without having to select each row one at a time?
Thanks for your help,
Andy

While it's a Table Control and should/could have a button to select all fields (or visible fields)...I don't think we can do it right now...I know it's a pain to select each row one at a time...but I don't we have any more options...
Greetings,
Blag.

CONVERTING ROWS OF AN INTERNAL TABLE TO COLUMNS OF ANOTHER INTERNAL TABLE

Hi,
I hv an internal table itab as below with 3 columns.
name           age         place
sandeep       24           delhi
ajay             22           bangalore
abhishek      25           mumbai
internal table itab can have any number of rows.
from this internal table i want to make another internale table itab_new as
sandeep     ajay            abhishek
24              22                 25
delhi          bangalore       mumbai
thanks

Hi,
Check this example:
data:p_temp(30) TYPE c value 'ztmp_projectreport'.
*data declaration
DATA: it_tab TYPE filetable,
      gd_subrc TYPE i,
      answer TYPE c.
TYPES: BEGIN OF t_abapcode,
row(72) TYPE c,
END OF t_abapcode.
DATA: it_abapcode TYPE STANDARD TABLE OF t_abapcode INITIAL SIZE 0.
data:it_prps like prps occurs 0 with header line.
data:colum(20) type c.
data:ncol type i.
data:ccol type c.
select * into corresponding fields of table
it_prps from prps where
append 'report ztmp_projectreport' to it_abapcode.
append 'data:begin of it_prps2,' to it_abapcode.
ncol = 1.
loop at it_prps.
ccol = ncol.
concatenate 'colum' ccol '(20)' into colum.
concatenate colum 'type c,' into it_abapcode.
add 1 to ncol.
endloop.
append 'data:end of it_prps2.' to it_abapcode.
'All your code here to fill the internal table and alv grid
'End of all your code
INSERT REPORT p_temp FROM it_abapcode.
      SUBMIT (p_temp) AND RETURN.
      DELETE REPORT p_temp.
Please provide points

Count of rows from different tables.

Hi Friends,
I have 4 tables with a common column name "ID". I would like to get the count of rows from all the four tables which has the same ID.
Ex
select count(a.id) from table1 a,table2 b,table3 c,table4 d where a.id=b.id=c.id=d.id=5;
please suggest me some solution

may be thsi?
select count(a.id) from table1 a,table2 b,table3 c,table4 d
where a.id=b.id and a.id=c.id and a.id=d.id and a.id=5;

Count rows in an internal table

Anybody how knows how I can count rows in my internal table?

Hi,
Data: lines like sy-tabix.
DESCRIBE TABLE ITAB LINES LINES.
where itab is your internal table.
This will work out.
Please award sutiable points .
Regards,
Irfan

Display distinct rows from Oracle table without using "DISTINCT" keyword.

How to retrieve distinct rows from oracle table without using 'DISTINCT' keyword in SQL?
Thanks in advance.
Mihir

Welcome to the forum.
Besides GROUP BY you can use UNIQUE instead of DISTINCT as well, but that's probably not wanted here ;) , and the ROW_NUMBER() analytic:
SQL> create table t as
2 select 1 col1 from dual union all
3 select 1 from dual union all
4 select 2 from dual union all
5 select 3 from dual union all
6 select 4 from dual union all
7 select 4 from dual;
Table created
SQL> select col1 from t;
      COL1
         1
         1
         2
         3
         4
         4
6 rows selected
SQL> select distinct col1 from t;
      COL1
         1
         2
         3
         4
SQL> select unique col1 from t;
      COL1
         1
         2
         3
         4
SQL> select col1 from t group by col1;
      COL1
         1
         2
         3
         4
SQL> select col1
2 from ( select col1
3         ,      row_number() over (partition by col1 order by col1) rn
4         from   t
5       )
6 where rn=1;
      COL1
         1
         2
         3
         4

How do I select rows from the same table that have multiple occurances

Hi Everybody,
I am trying to select records from a detail table by grouping it. The table has more than 1 million records and the query is not performing well. The basic question is how to select a distinct record from a table which matches all values in one column and any in the other.
desc SCV
ID NUMBER PK (ID + SCRID)
SCRID NUMBER FK(SC)
ID SCRID
1 1
2 1
3 1
4 2
5 2
6 3
7 4
8 4
desc PROJECTS
ID NUMBER PK
NAME VARCHAR2(100)
ID NAME
1 PROJECT1
2 PROJECT2
3 PROJECT3
4 PROJECT4
desc PJS
ID NUMBER
PROID NUMBER FK (PROJECTS)
SCRID NUMBER FK (SCV(SCRID + SCVID)
SCVID NUMBER
ID PROID SCRID SCVID
1 1 1 1
2 1 1 2
3 1 2 5
4 1 3 6
5 1 4 7
6 2 1 3
7 2 2 4
8 2 2 5
9 2 4 7
There are over 1 million records in PJS.
desc TBP
SCRID NUMBER
SCVID NUMBER
SCRID SCVID
1 1
1 2
1 3
2 4
2 5
3 6
4 7
4 8
The requirement is to select projects that have matching SCRID, SCVID from TBP such that
all distinct SCRID should match and within that and any SCVID match will do. (A "AND" between each SCRID and an "OR" for each SCVID in that SCRID like 'SCRID = 1 AND (SCVID = 1 OR SCVID = 2 OR SCVID = 3) AND SCRID = 2 AND (SCVID =....)
So, for the sample data it should return us PROID = 1
I have few queries written for this:
SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 1
INTERSECT
SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 2
INTERSECT
SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 3
INTERSECT
SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 4
This query performs well but the cost is very high, hardcoding, sorting.
The 2nd option is to:
SELECT pjs.PROID proid
FROM TBP tbp,
PJS pjs
WHERE pjs.SCVID = tbp.SCVID
AND pjs.SCRID = tbp.SCRID
GROUP BY pjs.PROID
HAVING COUNT(DISTINCT pjs.SCRID) = (SELECT COUNT(DISTINCT SCRID ) FROM TBP)
This has a low cost but runs slowly.
One more way I tried was with the IN operator like
SELECT DISTINCT PROID FROM PJS A,TBP T WHERE T.SCRID = 1 AND T.SCVID = A.SCVID
AND PROID IN (SELECT PROID FROM PJS A,TBP T WHERE T.SCRID = 2 AND T.SCVID = A.SCVID
AND PROID IN (...SO ON with each DISTINCT SCRID.
Again this involves too much of sorting.
Any help will be appriciated.
Thanks in advance.

Hi Andrew,
Use DELETE t_itab statement inside the loop.
I have modified your code. It is perfectly working.See bellow -
LOOP AT it_zmember01 INTO wa_zmember01.
WRITE: / wa_zmember01-mnumber UNDER 'NUMBER',
wa_zmember01-mname UNDER 'NAME',
wa_zmember01-mdob UNDER 'DOB'.
WRITE / '-----------------------------------------------------------------'.
DELETE it_zmember01. " Modified
ENDLOOP.
DELETE it_zmember01. statement inside the loop will delete the current row of the table.
Regards
Pinaki

How to get data from an internal table in some other program

I would like to get data from the internal table in the other program. When I using FM "LIST_FROM_MEMORY" to get the data, it doesn't work and the exception is not fount.
If any special code need in the other program, like write data to memory .
Many thx .
From Ross Wang

Hi
<li>You need to have interaction if you want to use EXPORT/IMPORT statments.
<li>The internal tables in both programs must be same
<li>Program one ..Calling program
REPORT ZTEST_NOTEPAD.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SUBMIT ztest_notepad1 AND RETURN.
IMPORT it_t001 FROM MEMORY ID 'ZTEST_T100'.
LOOP AT it_t001.
    WRITE:/ it_t001.
ENDLOOP.
<li>Program two ...Called program
REPORT ztest_notepad1.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SELECT * FROM t001 INTO CORRESPONDING FIELDS OF TABLE it_t001 UP TO 10 ROWS.
IF sy-dbcnt > 1.
    EXPORT it_t001 TO MEMORY ID 'ZTEST_T100'.
ENDIF.
I hope that it gets you some idea.
Thanks
Venkat.O

How to download data from an internal table to a text

Hi All,
I want to download data from an internal table to a text file.
The fields should be pipe(|) separated. I have tried GUI_DOWNLOAD but it is not taking the field separator.
The sample of the desired data that i require should be this way:-
13456TR|M|COUP|MATERIAL|KGS
Thanks in advance.
Regards
Satish.

Hi,
Try this..
REPORT zc1download message-id zc1dwnmsg.
*& Declaration Section for the Tables *
TABLES: makt.
*& Declaration Section for the Internal Tables
DATA: intab TYPE TABLE OF makt,
      wa_intab LIKE LINE OF intab,
      no_of_rec TYPE i,
      count TYPE i.
DATA: BEGIN OF f_intab,
        str(255) TYPE c,
      END OF f_intab.
DATA: t_intab LIKE TABLE OF f_intab,
      w_intab LIKE LINE OF t_intab,
      temp(255) TYPE c.
FIELD-SYMBOLS: <f> TYPE ANY.
*& Selection ScreenSection for the file download
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: file TYPE rlgrap-filename MEMORY ID file,
            tab RADIOBUTTON GROUP rad1 DEFAULT 'X',
            others RADIOBUTTON GROUP rad1,
            delimit TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
IF file IS INITIAL. " check to ensure file.
    MESSAGE i001.
    EXIT.
ENDIF.
IF others = 'X'.    " check to ensure delimiter.
    IF delimit = ' '.
      MESSAGE i002.
      EXIT.
    ENDIF.
ENDIF.
SELECT * FROM makt INTO TABLE intab.
IF tab = 'X'.       " default delimiter tab is used
      CALL FUNCTION 'WS_DOWNLOAD'
      EXPORTING
        filename                = file
        filetype                = 'DAT'
        mode                    = 'A'
      TABLES
        data_tab                = intab
      EXCEPTIONS
        file_open_error         = 1
        file_write_error        = 2
        invalid_filesize        = 3
        invalid_type            = 4
        no_batch                = 5
        unknown_error           = 6
        invalid_table_width     = 7
        gui_refuse_filetransfer = 8
        customer_error          = 9
        no_authority            = 10
        OTHERS                  = 11.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ELSE.             " If user defind delimiter is to be used
              Counts the number of fields                *
    DO.
      ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
      IF sy-subrc <> 0.
        EXIT.
      ELSE.
        count = count + 1.
      ENDIF.
    ENDDO.
    LOOP AT intab INTO wa_intab.
      DO count TIMES. " Adding the delimiter in required places
        ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
        CONCATENATE temp delimit <f> INTO temp.
      ENDDO.
      SHIFT temp.
      APPEND temp TO t_intab.
      CLEAR temp.
    ENDLOOP.
    CALL FUNCTION 'WS_DOWNLOAD'
      EXPORTING
        filename                = file
        filetype                = 'ASC'
        mode                    = 'A'
      TABLES
        data_tab                = t_intab
      EXCEPTIONS
        file_open_error         = 1
        file_write_error        = 2
        invalid_filesize        = 3
        invalid_type            = 4
        no_batch                = 5
        unknown_error           = 6
        invalid_table_width     = 7
        gui_refuse_filetransfer = 8
        customer_error          = 9
        no_authority            = 10
        OTHERS                  = 11.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
WRITE:/ 'The Data has been tranfered to :', file.
Cheers
Kathir!~

No. of Rows in an internal table

Dear Friends,
Please let me know which ABAP System Field shall give me the no. of rows in an internal table. If it is sy-dbcnt kindly provide an example on how to use it in a program.
Regards,
Alok.

Hi Alok,
Use the Describe Statement.
Sample Program :
*TABLES ZVIJIRANK.
*DATA : BEGIN OF IT OCCURS 10.
*INCLUDE STRUCTURE zvijirank.
*DATA : END OF IT.
*data : lines1(4) type n,
      knd type c,
       n type i.
*select * from zvijirank into table it.
**describe table zvijirank lines lines1. -
> Describe statement is only used for Internal Tables.....
*write : / 'BEFORE DESENDING'.
*LOOP AT IT.
*WRITE : / IT-REG_NO , IT-NAME.
*ENDLOOP.
*ULINE.
*describe table it lines lines1. "-----> To find No Of lines
Write : lines1.
Thanks.
Message was edited by:
        Viji

Create an internal table with the rows of another internal table.

Hi I want to know if posible to create an internal table structure with the rows of another internal table?
ex.
If in i_tab column A has this values: row 1 = first, row 2 = second, row 3 = third.
Now I want that the structure of my internal table be: first, second, third

Hi,
If you do this way then what will be the difference between the two table anyway?? First internal table has the same structure irrespective of which row you select. and you are going to store the data from each row to the rows of the second internal table. In that case, the structure of the internal table is the same as first table. and it would have same rows.
Am I missing something here? or you want to declare the internal table with each field being the structure of the first table? In this case you'd have to do a dynamic declaration of data as the first table can have any no of rows then the second table would have any no of fields in the structure.
Now if you know that your first internal table is going to have a fixed no of rows eg 3 rows then it becomes simple. Do the following then
Data: begin of second_table occurs 0,
first type <first_table type>,
second type <first_table type>,
third type <first_table type>,
end of second_table.
Regards
Prasenjit

Resukt:Get number of rows from 3 different table...?

Hi All,
I need to find out number of rows from 3 different table for the same conditions. Instead of writing 3 queries, is it possible to get it thru one query?
For example, i need to find out number of rows in tables where name = 'Ameet' from 3 different table, i will end writing 3 queries.
1. select count(1) from table_a where name = 'Ameet';
1. select count(1) from table_b where name = 'Ameet';
1. select count(1) from table_c where name = 'Ameet';
Is it possible to write a single query to get result of all above 3 queries?
result:
table_a table_b table_c
34 44 2

One way:
SELECT      (SELECT     COUNT(*) AS CNT FROM TABLE_A WHERE name='Ameet') AS TABLE_A
,     (SELECT     COUNT(*) AS CNT FROM TABLE_B WHERE name='Ameet') AS TABLE_B
,     (SELECT     COUNT(*) AS CNT FROM TABLE_C WHERE name='Ameet') AS TABLE_C
FROM DUALIf you want the total:
SELECT     SUM(CNT)
FROM
     SELECT     COUNT(*) AS CNT FROM TABLE_A WHERE name='Ameet'
     UNION ALL
     SELECT     COUNT(*) FROM TABLE_B WHERE name='Ameet'
     UNION ALL
     SELECT     COUNT(*) FROM TABLE_C WHERE name='Ameet'
)

Filling dynamic internal table with data from other internal table

Hi Friends,
My problem is that i have already built a dynamic internal table
(class int_table->create) but now i want to fill it with data from other internal table.
The dynamic table column name and the field value of the data filled internal table are same, but how to access that column name, since i cant hard code it anyway.
Like if my werks field value is '8001'. I want to place it under the column 8001 of dynamic table, Can anybody help me in this regard?
Awarding points is not a problem for even giving a slight hint.
Best Regards

Hi
See this
Dynamic internal table is internal table that we create on the fly with flexible column numbers.
For sample code, please look at this code tutorial. Hopefully it can help you
Check this link:
http://www.****************/Tutorials/ABAP/DynamicInternaltable/DynamicInternalTable.htm
Sample code:
DATA: l_cnt(2) TYPE n,
l_cnt1(3) TYPE n,
l_nam(12),
l_con(18) TYPE c,
l_con1(18) TYPE c,
lf_mat TYPE matnr.
SORT it_bom_expl BY bom_comp bom_mat level.
CLEAR: l_cnt1, <fs_dyn_wa>.
Looping the component internal table
LOOP AT it_bom_expl INTO gf_it_bom_expl.
CLEAR: l_cnt1.
AT NEW bom_comp.
CLEAR: l_cnt, <fs_dyn_wa>, lf_mat.
For every new bom component the material data is moved to
temp material table which will be used for assigning the levels
checking the count
it_mat_temp[] = it_mat[].
Component data is been assigned to the field symbol which is checked
against the field of dynamic internal table and the value of the
component number is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_comp_list OF STRUCTURE <fs_dyn_wa> TO
<fs_check>.
<fs_check> = gf_it_bom_expl-bom_comp.
ENDAT.
AT NEW bom_mat.
CLEAR l_con.
ENDAT.
lf_mat = gf_it_bom_expl-bom_mat.
Looping the temp internal table and looping the dynamic internal table
*by reading line by line into workarea, the materialxxn is been assigned
to field symbol which will be checked and used.
LOOP AT it_mat_temp.
l_nam = c_mat.
l_cnt1 = l_cnt1 + 1.
CONCATENATE l_nam l_cnt1 INTO l_nam.
LOOP AT <fs_dyn_table2> ASSIGNING <fs_dyn_wa2>.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa2> TO <fs_xy>.
ENDLOOP.
IF <fs_xy> = lf_mat.
CLEAR lf_mat.
l_con1 = l_con.
ENDIF.
Checking whether the material exists for a component and if so it is
been assigned to the field symbol which is checked against the field
of dynamic internal table and the level of the component number
against material is been passed to the dynamic internal table field
value.
IF <fs_xy> = gf_it_bom_expl-bom_mat.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
CLEAR l_con.
MOVE gf_it_bom_expl-level TO l_con.
CONCATENATE c_val_l l_con INTO l_con.
CONDENSE l_con NO-GAPS.
IF l_con1 NE space.
CONCATENATE l_con1 l_con INTO l_con SEPARATED BY c_comma.
CLEAR l_con1.
l_cnt = l_cnt - 1.
ENDIF.
<fs_check> = l_con.
l_cnt = l_cnt + 1.
ENDIF.
ENDLOOP.
AT END OF bom_comp.
At end of every new bom component the count is moved to the field
symbol which is checked against the field of dynamic internal table
and the count is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_count OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
<fs_check> = l_cnt.
INSERT <fs_dyn_wa> INTO TABLE <fs_dyn_table>.
ENDAT.
ENDLOOP.
Reward if useful
Anji

Read data from STATIC internal table during round trip in DO_PREPARE_OUTPUT

Dear Gurus
I have a requirement where I need to select some data from the database table BUT_HIER_NODE_D.
After SELECTING this data to an internal table (say ITAB), I am displaying this data in a table view. I was able to achive this functionality by putting some code in the DO_PREPARE_OUTPUT method.
Now according to my requirement, after the above data has been displayed on the screen initially, the user will click on any row. After clicking on a particular row, I need to capture the document number on that particular row and need to display all its child document numbers in a separate table. I am able to achive this functionality also.
Initially I am not sure of how to READ the same internal table (ITAB) again and again by avoiding the SELECT query upon each round trip (between CRM and Web).
After some research, I understand that I might have to use STATIC internal table to store the data during the
initial SELECT. This way, upon each round trip, I can READ the data from the same internal table.
My question: But now, when I tried to create a STATIC internal table in DO_PREPARE_OUTPUT, it is not allowing me to declare this table because DO_PREPARE_OUTPUT method is a INSTANCE method.
I didn't find any STATIC methods in the IMPL class of the view.
I would really appreciate if somebody can help me on how to proceed further.
Thanks
Raj

Hi Bharathy / Adil / Masood
Thank you very much for the replies. I declared a static method inside the IMPL class and I was calling this method inside the DO_PREPARE_OUTPUT method. Looks like it is working fine for me...will comeback if I had any further issues.
Masood
As per my requirement, I need to Select the data into the internal table during the very first step, then I need to continuosly read the data from this internal table upon every round trip. So I am not sure if I would be able to use the method DO_INIT_CONTEXT. Because I need a method which will trigger upon each round trip and will also hold the data of this internal table. So right now, the only option for me is DO_PREPARE_OUTPUT method.
Plz let me know if am doing in the right way.
Thanks
Raj

Count distinct rows from an internal table

Similar Messages

Maybe you are looking for