Count from Cross TAB1 should add to Line Number in Cross TAB 2 in 1 report

Hello Friends I have 2 cross Tab1 based on 2 query data providers. I need to feed calculate the Count of Items in Cross Tab1 and add that to line Number in Cross TAB2 which sit below cross tab1
So if there are 21 items in Cross TAB1 then Line Number in Cross TAB 2 shall be 22
so do this i Created a count variable
=Count([Item ID]) In Report
which give me 21 in cross tab1 but when I drag that to cross tab2 it give junk value 179
so How do I fix this Line number Count in Cross Tab 2
Please help with code to say Count([Item ID]) In Report from cross tab1 and add Line Number to it = 22
thanks
soniya

Hello Friends I have cross Tab1 and Cross Tab2 based on 2 query data providers. I need to feed calculate the Count of Items in Cross Tab1 and DISPLAY In cross Tab2
Dimension name is ITEM ID
So if there are 21 items in Cross TAB1 then in Cross TAB 2
I want to display "Number of Item" = 21
so do this i Created a count variable
=Count([Item ID]) In Report
which give me 21 in cross tab1 but when I drag that to cross tab2 it give me count of Item in Cross Tab2 = 87 which is wrong since i want 21
so How do I fix this Count in Cross Tab 2
Please help with code to say Count([Item ID]) In Report from cross tab1
thanks
Soniya

Similar Messages

Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

Hi !
Sir I have some questions regarding word report generation using(C language in labwindows) Please.
1.How can i add border to a word page?.
2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
3.How can i fill a cell of word report table withe the data type other than "character"?.
And sir one question about use of timer in cvi labwindows please.
Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
Regards
Imran
Pakistan
Solved!
Go to Solution.

Hello sir!
Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is involved i,m just trying to achieve minimum time interval of 1millisecond.
Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
And sir also waiting for your kind reply regarding word report generation.
Thanks.
Imran.
Attachments:
screen_shot_rigistry.docx ‏65 KB

File to Jdbc: how to get record count from DB table

Hello,
i have a scenario file to JDBC....ihave to insert input file data to DB table.
now my requirement is ..if i insert a file with 50 records to db table on first time, and then next time if i insert the file with 100 records to db table....the count should start from 51 in db table.
if i insert another file 3rd time, with 25 records, the count shold start from 151...so how can i achieve this functionality....
i think following options:
1. in mapping write lookup to call JDBC sender channel and fetch count and map same to target filed of DB. if this is ok...please provide UDF code..2. db triggers (not suitable for my req.)
So kindly let meknow possible solutions and required UDF codes..please
Thanks in advance...SARAN

>>>..if i insert a file with 50 records to db table on first time, and then next time if i insert the file with 100 records to db table....the count should start from 51 in db table.
if i insert another file 3rd time, with 25 records, the count shold start from 151...so how can i achieve this functionality....
i think following options:
Suggestions:
1)Create an id column in db table. Talk to DB guy to create oracle sequencer for that column. So, every time you insert record that field will be updated with oracle sequencer. You dont need to handle this.
Refer this link
http://www.techonthenet.com/oracle/sequences.php
2) If you want to handle via pi, following suggestions..
If you use PI 7.1 or above, use jdbc lookup in the mapping and do the query something like this
Refer this link
/people/jin.shin/blog/2008/02/15/sap-pi-71-mapping-enhancements-series-graphical-support-for-jdbc-and-rfc-lookups
Do select query as below
select count(*) from tablename;
the above query will return number of rows exist in the table. So use that value and map it in the target field.
If you use pi 7.0 or below then use the previous reply and do the UDF implementation for jdbc lookup during mapping. Because jdbc lookup does not support in those versions.
Hope that helps.
Baskar

Add Line Number To A PLD

Hi,
I need your help about an issue on a General Ledger PLD.
I need to add the line number of each journal entry line printed in the repetitive section on the PLD.
Is there any way to do it ?
Thank you in advance,
Best Regards,

Hi,
This PLD has all system variables only. You may not add any fields to it. Only customized report by yourself may meet your need.
Thanks,
Gordon

Inaccurate line number in C++ warning message

Compiling the following code snippet with SS11 or SS12 C++ compiler creates a warning which obviously carries wrong or inaccurate line number information:
# cat warn.C
class Test {
public:
    Test(int);
    int var1;
Test::Test(int var1) {
//             ^^^^
   this->var1 = var1;
// and now, for something completely different...It says:
# CC -c warn.C
"warn.C", line 13: Warning: var1 hides Test::var1.
1 Warning(s) detected.line 13 is the comment at the end of the file. The right line would probably be 7 (as marked by ^^^^).
I know that it's just a warning, but it should be accurate though.
Thanks,
Jochen

Yes, the compiler should do better in providing the line number.
Please file a bug report on the C++ compiler at
[http://bugs.sun.com]

Safari 6.0 Web Inspector CSS line number

Please add the line number of the class or id on the css web inspector.
The old version has the line number in front of the class
The new one doesnt, to see it you need too put the cursor on the little arrow and shows the path on a tooltip. Please change this like the other version.

Just for giggles, I ran the same benchmarks on my Macbook Air, 1.8GHz i5, 4Gb RAM, 10.8.3, non-retina:
Safari 6.0.3
Firefox 19
Chrome 25
SunSpider
192ms
243ms
210ms
HTML5Test
378
393
463
Peacekeeper
3238 (3/7)
2052 (5/7)
3900 (6/7)
Memory Usage
482Mb
311Mb
373Mb

OrderItem- Line number

Hello,
i got one Order XML from SAP system which shows the Line number as " 1" for more than 1 order item.
<orderItem lineNum="1" materialCode="123456" materialQuantity="1" stockPlant="123" storageLocation="1234">
<lineItemPrice value="123"/>
<lineItemDiscount value="0.0"/>
<orderItem lineNum="1" materialCode="98766" materialQuantity="1" stockPlant="987" storageLocation="9687">
<lineItemPrice value="987"/>
<lineItemDiscount value="0.0"/>
from avoce sample data assume first linenum represemts material 123456 and second represents matrial 98766.
now problem is if i order 123456, i am getting 98766 due to same linenum. how to resolve this issue.
can we predit this at SAP SD.
please let me know what are settings /logic applied for LineItem while generating Orders.

Hi Chun,
just follow this code.
private static JCO.Client client;
private static JCO.Repository repository;
client =
JCO.createClient(
"<client num>",
"<user name>",
"<password>",
"en",
"<server ip or server name>",
"<instance number>");
client.connect();
repository = new JCO.Repository("REP", client);
try {
IFunctionTemplate m_read_container;
m_read_container =repository.getFunctionTemplate("<RFC Name>");
JCO.Function function_read_cont = m_read_container.getFunction();
JCO.ParameterList tables =
function_read_cont.getTableParameterList();
//For Tables
JCO.Table table = tables.getTable("<Your table Name from table parameter>");
<b>// specified number of empty rows at the end of the table
table.appendRows(<Enter the number of expected rows>);
for(int i=0;i<table.getNumRows();i++)
// Moves the row pointer to the next row
   table.nextRow();
// public void setValue(<Data Type> value,java.lang.String fieldName)
// set the field values . must have a look at the data type of the field to be set.
// Here can use table.getNumColumns() .. to find out the number of of columns in the table , and loop through this...
    table.setValue(<use type casted data value>,<fieldName>);
}</b>
// Execute the RFC
client.execute(function_read_cont);
} catch (Exception e) {
For function details just refer these links.
JCO API
http://www.huihoo.org/openweb/jco_api/com/sap/mw/jco/JCO.html
JCO.Table
http://www.huihoo.org/openweb/jco_api/com/sap/mw/jco/JCO.Table.html
                                        Regards
                                          Kishor Gopinathan

Need to add extra lines in email generating from oracle

Hi!
I am using Oracle 9i Enterprise Edition 9.2.0.6
I am facing a problem while generating the email from Oracle
Problem is that I want to display the data in following format
Terminal Statistics From: 30-MAR-2008 15:39:00 To: 06-JUN-2008 16:59:00
Containers Examined
Export: 2
Import: 30
but email shows data in following format
Terminal Statistics From: 30-MAR-2008 15:39:00 To: 06-JUN-2008 16:59:00 Containers Examined Export: 2 Import: 30
System combines the all the data in one line, while I have used following function to add new line when and where needed, but unable to get my desired result.
1. utl_tcp.CRLF
2. chr(130) || chr(10)
3. chr(10)
I have used following procedure to generate the email.
PROCEDURE send_html_email(
p_module_name in varchar2,
p_subject in varchar2,
p_text in varchar2 default null,
p_html in varchar2 default null
IS
l_boundary varchar2(32767) default 'a1b2c3d4e3f2g1';
l_connection utl_smtp.connection;
l_body_html clob := empty_clob; --This LOB will be the email message
l_offset number;
l_ammount number;
l_temp varchar2(32767) default null;
l_to varchar2(100);
l_cc varchar2(100);
l_bcc varchar2(100);
t_v_stpt Number:=0;
t_v_endpt Number:=0;
c_v_stpt Number:=0;
c_v_endpt Number:=0;
b_v_stpt Number:=0;
b_v_endpt Number:=0;
l_subject varchar2(255);
BEGIN
/*Function to retrieve the E-mail recipients list according to the Module/application*/
mail_recipient(p_module_name,l_to,l_cc,l_bcc);
l_connection := utl_smtp.open_connection( pk_parameter.setting('MAILSVR'), 25 );
utl_smtp.helo( l_connection, pk_parameter.setting('MAILSVR') );
utl_smtp.mail( l_connection, pk_parameter.setting('MAILFROM') );
l_temp := l_temp || 'MIME-Version: 1.0' || chr(13) || chr(10);
LOOP
t_v_stpt := t_v_stpt + 1;
t_v_endpt := INSTR (l_to, ',', t_v_stpt, 1);
IF l_to is null then
EXIT;
ELSIF t_v_endpt = 0 THEN
UTL_SMTP.rcpt (l_connection, SUBSTR (l_to, t_v_stpt));
EXIT;
ELSE
UTL_SMTP.rcpt (l_connection, SUBSTR (l_to, t_v_stpt, t_v_endpt -t_v_stpt));
END IF;
t_v_stpt := t_v_endpt;
END LOOP;
LOOP
c_v_stpt := c_v_stpt + 1;
c_v_endpt := INSTR (l_cc, ',', c_v_stpt, 1);
IF l_cc is null then
EXIT;
ELSIF c_v_endpt = 0 THEN
UTL_SMTP.rcpt (l_connection, SUBSTR (l_cc, c_v_stpt));
EXIT;
ELSE
UTL_SMTP.rcpt (l_connection, SUBSTR (l_cc, c_v_stpt, c_v_endpt -c_v_stpt));
END IF;
c_v_stpt := c_v_endpt;
END LOOP;
LOOP
b_v_stpt := b_v_stpt + 1;
b_v_endpt := INSTR (l_bcc, ',', b_v_stpt, 1);
IF l_bcc is null then
EXIT;
ELSIF b_v_endpt = 0 THEN
UTL_SMTP.rcpt (l_connection, SUBSTR (l_bcc, b_v_stpt));
EXIT;
ELSE
UTL_SMTP.rcpt (l_connection, SUBSTR (l_bcc, b_v_stpt, b_v_endpt -b_v_stpt));
END IF;
b_v_stpt := b_v_endpt;
END LOOP;
/*Header creation for email.*/
IF l_to is not null or l_cc is not null or l_bcc is not null THEN
l_temp := l_temp || 'To: ' || l_to || chr(13) || chr(10);
l_temp := l_temp || 'CC: ' || l_cc || chr(13) || chr(10);
l_temp := l_temp || 'BCC: ' || l_bcc || chr(13) || chr(10);
l_temp := l_temp || 'From: ' || pk_parameter.setting('MAILFROM') || chr(13) || chr(10);
l_temp := l_temp || 'Subject: ' || p_subject || chr(13) || chr(10);
l_temp := l_temp || 'Reply-To: ' || pk_parameter.setting('MAILFROM') || chr(13) || chr(10);
l_temp := l_temp || 'Content-Type: multipart/alternative; boundary=' ||
chr(34) || l_boundary || chr(34) || chr(13) ||
chr(10);
-- Write the headers
dbms_lob.createtemporary( l_body_html, false, 10 );
dbms_lob.write(l_body_html,length(l_temp),1,l_temp);
-- Write the text boundary
l_offset := dbms_lob.getlength(l_body_html) + 1;
l_temp := '--' || l_boundary || chr(13)||chr(10);
l_temp := l_temp || 'content-type: text/plain; charset=us-ascii' ||
chr(13) || chr(10) || chr(13) || chr(10);
dbms_lob.write(l_body_html,length(l_temp),l_offset,l_temp);
-- Write the plain text portion of the email
l_offset := dbms_lob.getlength(l_body_html) + 1;
dbms_lob.write(l_body_html,length(p_text),l_offset,p_text);
-- Write the HTML boundary
l_temp := chr(13)||chr(10)||chr(13)||chr(10)||'--' || l_boundary ||
chr(13) || chr(10);
l_temp := l_temp || 'content-type: text/html;' ||
chr(13) || chr(10) || chr(13) || chr(10);
l_offset := dbms_lob.getlength(l_body_html) + 1;
dbms_lob.write(l_body_html,length(l_temp),l_offset,l_temp);
-- Write the HTML portion of the message
l_offset := dbms_lob.getlength(l_body_html) + 1;
dbms_lob.write(l_body_html,length(p_html),l_offset,p_html);
-- Write the final html boundary
l_temp := chr(13) || chr(10) || '--' || l_boundary || '--' || chr(13);
l_offset := dbms_lob.getlength(l_body_html) + 1;
dbms_lob.write(l_body_html,length(l_temp),l_offset,l_temp);
-- Send the email in 1900 byte chunks to UTL_SMTP
l_offset := 1;
l_ammount := 32767;
utl_smtp.open_data(l_connection);
while l_offset < dbms_lob.getlength(l_body_html) loop
utl_smtp.write_data(l_connection, dbms_lob.substr(l_body_html,l_ammount,l_offset));
l_offset := l_offset + l_ammount ;
l_ammount := least(32767,dbms_lob.getlength(l_body_html) - l_ammount);
end loop;
utl_smtp.close_data(l_connection);
utl_smtp.quit( l_connection );
dbms_lob.freetemporary(l_body_html);
END IF;
END;
Following procedure calls the above function and generate the email
PROCEDURE generate_statistics
IS
l_minutes NUMBER:=0;
l_sub_type cg_ref_codes.rv_meaning%type;
l_gate_text VARCHAR2(5000);
l_ves_text VARCHAR2(5000);
l_exm_text VARCHAR2(5000);
l_email_text VARCHAR2(5000);
l_gate_tot NUMBER:=0;
l_load_tot NUMBER:=0;
l_discharge NUMBER:=0;
l_exm_tot NUMBER:=0;
/*Declare Cursor to get Examined Containers Summary*/
CURSOR cur_examined_ctrs IS
SELECT decode(eu.category,'I','Import','E','Export') Category, count(*) Total
FROM service_events se, equipment_uses eu
WHERE se.performed BETWEEN round(sysdate-l_minutes/1440,'mi')
AND round(sysdate,'mi')
AND se.tserv_id IN ('EXM')
AND eu.gkey = se.equse_gkey
AND eu.category IN ('I','E')
GROUP BY eu.category;
BEGIN
/*Retrieve parameterized minutes*/
l_minutes := nvl(pk_parameter.setting('STATSGMI'),0);
/*Assign Values to generate email*/
l_email_text := 'Terminal Statistics From: '||
to_char(round(sysdate-l_minutes/1440,'mi'),'DD-MON-RRRR HH24:MI:SS')||
' To: '||to_char(round(sysdate,'mi'),'DD-MON-RRRR HH24:MI:SS')||
chr(13) || chr(10)||chr(13) || chr(10);
l_exm_text := 'Containers Examined'||utl_tcp.CRLF;
FOR rec_examined_ctrs IN cur_examined_ctrs LOOP
/*Generate Text for email - Vessel Activity Crane Wise Starts*/
l_exm_text := l_exm_text ||rec_examined_ctrs.category ||': '||
rec_examined_ctrs.total||utl_tcp.CRLF;
l_exm_tot := l_exm_tot + rec_examined_ctrs.total;
END LOOP;
l_email_text := l_email_text||l_exm_text;
pk_kictl_email.send_html_email('TERM STATISTICS',
'Terminal Statistics Report',
l_email_text,
l_email_text
END;
I have been searching the reason and solution on net since last 2 days but hasn't find it yet.
would anybody plz help me regarding this.
Thanks
Hassan

I checked your suggestions after week end today and found that
the suggestion of Nalla did not provide the result in my required format
rewrite it as l_email_text := l_email_text||CHR(10)||l_exm_text;
Peter & Krithika:
I used html tag <BR> when and where needed and its gave me result in my required format
e.g.: l_exm_text := l_exm_text ||'<br>'||rec_examined_ctrs.category ||': '||
rec_examined_ctrs.total;
Now I want to know if there any html tag thru which I can define the column number so that my text will start from there.
means any html tag replacement of lpad (oracle funtion):
Thanks
Hassan

Link between Delivery schedule line counter from PO and the material docume

Dear Gurus,
I have one PO with single line item having delivery schedule -
Material 1 -
delivery schedule 01.01.2009     2000
                                                     01.03.2009    5000
I have received quantity against this Po
I want to know where I can find the link between Delivery schedule line counter from PO and the material document
Best regards
Sar

There is no link from the MAterial document line item (Table Mseg) to the PO Schedule Line (EKET).
If this is for Evaluating an on time delivery or GR, you may consider the following approach.
PO details Po Date QTY
Sch1   01Jun2009   200
SCH2 08Jun2009   100
GR Details
GR1   01Jun2009   180
GR2   07Jun2009   110
GR3 09Jun2009      10
Calculate a *** total qty for the PO Line.
PO details Po Date CUMUL QTY
Sch1   01Jun2009   200
SCH2 08Jun2009   300
Calculate a *** total qty for the ontime GR.
PO details Po Date CUMUL PO QTY CUMUL GR on time
Sch1   01Jun2009   200                180
SCH2 08Jun2009   300                 290 (180+110) the 3rd GR was too late
Evaluate the PO SChedule Lines as follows:
Po SCL qty + CUMUL GR QTY - CUMUL PO QTY = ADJ GR ON Time Qty
SCH1 01Jun2009
200 + 180 - 200 = 180 on time for 01Jun2009 date ( 90% fill rate)
SCH2 08Jun2009
100 + 290 - 300 = 90 on time for 08Jun2009 date (90 % fill rate) the first 20 of the GR on 07Jun2009 went to fill the late, early date.
Best of luck !
SCH2 100 +290 - 300 = 90 on time for 07Jun2009 date

How to add header line in a file from XI system using file adapters

Hi All,
I need to add header line (Column names) in a file coming from XI system.
I am using file adapters.
Thanks & Regards,
Gaurav Mittal

The Receiver File Adapter is configured, using the following settings:
1) Choose File Content Conversion as the Message Protocol.
2) You give the addHeaderLine parameter as 1
3) For the fieldSeparator parameter you need to give field separator for both list and substructure (referring to the data type above). For eg: it may be a , (comma) for substructure in a comma separated file.
4) The endSeparator parameter needs to given for substructure only. For eg: it may be a nl (new line)
5) Give the file name, the directory and the Construction mode. Activate all the settings. Receiver File Adapter with F.C.C. is configured.
please visit the blog.
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2

Anyone know which render format I should use, my film will be used on a video wall (12 screens) and I need super quality. My footage format is 1080p HD resolution 1920x1080. I will be running the project from a mac with a direct line to video wall. Thanks

Anyone know which render format I should use, my film will be used on a video wall (12 screens) and I need super quality. My footage format is 1080p HD resolution 1920x1080. I will be running the project from a mac with a direct line to video wall. Thanks in advance.

I do some VJ-type work, involving playback of QuickTime files from the computer to projections, and I get good results using ProRes 422. That's convenient, because ProRes 422 is such a great editing codec, too.
Traditionally, VJs use PhotoJPEG codec, which also works well, but it's a bad editing codec. So you would have to export an edited master, then convert.
If you want it to look as good as possible, definitely schedule some time to test the footage on the wall. You may want to change the color correction of your footage to match the projectors. And if you feed the video wall some flat gray, you can see if any of the projectors need to be adjusted.
I'm not sure what application you're using for playback, but QuickTime Player 7 works well. It has an option to play fullscreen on an external monitor (View > Present Movie…).

Add a count to an ALV grid of the total number of lines

Hi There
I have a really long ALV report which prints lots of records. How can I add a total number of records count to appear in the header?
I use the Grid display function to call the ALV grid.
Any help appreciated

Hi,
You can do as below :
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
* Form TOP-OF-PAGE                                                 *
* ALV Report Header                                                 *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
      wa_header type slis_listheader,
      t_line like wa_header-info,
      ld_lines type i,
      ld_linesc(10) type c.
* Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
* Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
               sy-datum+4(2) '.'
               sy-datum(4) INTO wa_header-info.   "todays date
append wa_header to t_header.
clear: wa_header.
* Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
                    into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
*            i_logo             = 'Z_LOGO'.
endform.
Thanks,
Sriram Ponna.

How can I add a line but keep the number I have from tmobile

How can I add a line but keep the number I have from Tmobile

Hi, Janice!
I'm just guessing, but I imagine you'd get your question answered faster in the AE forum.

How to add the line items while running the VA01

HI All,
I want to add the line items while I am running the VA01 t-code(In run time).Could anybody give the FM to create the line items....Its urgent

Hi ,
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
regards
P.

Putting Category Counts in a Tool Tip on a Line Chart -SQL Server 2008 R2

I have a line chart report that shows the total number of tickets processed each month. Within the same recordset is the data of who processed the ticket. So I want to add in the ToolTip on the Datapoints the number of tickets processed by each
persion. There are just a few people.
So the line chart will have a datapoint at 20, but Joe did 5 and Jim did 15. What expression would I put in the tooltip? I even added datavalues for the Names and hid the data on the chart. I am just not sure how to reference or write the expression
that says joe has 5 and jim has 15 in the ToolTip. Then I would want an "Other" with all Rogues not Jim or Joe.
Example of Data
Ticket #  DATE_REPORTED  ASSIGNEE_FULL_NAME
1  2013-01-16 08:31:28.000  Joe
2  2013-01-17 07:01:23.000 Jim
3 2013-02-04 17:42:23.000   Jim
4  2013-02-04 18:42:23.000   Bill
Thanks in advance.
DBA Developer

Hi Paul,
As per my understanding, if we want to display some detail information depend on one field, we should add a group on that filed ahead. In your scenario, we should add a Category group or Series group in the chart, then write an expression to display the
detail information. While, if we additional add a group in the chart, the chart would showed with other manners. It will be different from the original chart. So, I think we cannot directly achieve the goal at the moment.
As a workaround, I suggest we can create another report to only display the detail information, then add a drill through action in the main report to jump to that report when we click the line. For more details, please refer to the following steps:
Drag a Line Chart on the design surface of the new report.
Insert [Count(Ticket__)] in the Values pane.
Insert the expression below as the Category Group Label expression and Group expression:
=format(Fields!DATE_REPORTED.Value,"MM")
Insert the expression below as the Series Group Label expression and Group expression:
=iif(Fields!ASSIGNEE_FULL_NAME.Value="Joe",Fields!ASSIGNEE_FULL_NAME.Value,iif(Fields!ASSIGNEE_FULL_NAME.Value="Jim",Fields!ASSIGNEE_FULL_NAME.Value,"Others"))
In the main report, right-click the line to open Series Properties dialog box.
Click Action in the left pane, enable Go to Report, then specify the new report name in the drop-down report.
If we want to see the detail information, we can click the line in the main report, it navigates to the new report. Then we can click “Back to Parent Report” action to return to the main report.
Hope this helps.
Regards,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Count from Cross TAB1 should add to Line Number in Cross TAB 2 in 1 report

Similar Messages

Maybe you are looking for