Add a count to an ALV grid of the total number of lines

Hi There
I have a really long ALV report which prints lots of records. How can I add a total number of records count to appear in the header?
I use the Grid display function to call the ALV grid.
Any help appreciated

Hi,
You can do as below :
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
* Form TOP-OF-PAGE                                                 *
* ALV Report Header                                                 *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
      wa_header type slis_listheader,
      t_line like wa_header-info,
      ld_lines type i,
      ld_linesc(10) type c.
* Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
* Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
               sy-datum+4(2) '.'
               sy-datum(4) INTO wa_header-info.   "todays date
append wa_header to t_header.
clear: wa_header.
* Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
                    into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
*            i_logo             = 'Z_LOGO'.
endform.
Thanks,
Sriram Ponna.

Similar Messages

Multiple ALV Grids on the same window.

Hi,
Can someone tell me if it's possible to display multiple ALV grids on the same window.If so how is it done.Please note that I am talking about Grid Display and not List Display.
Regards,
Swathi Balakrishnan

Hi,
This can be done even i have done a report.
Its very simple create three containers as below.
Just repeat three times if u need to create three containers.
See this sample code using custom container.
START-OF-SELECTION.
Begin of process logic
CALL SCREEN '0100'.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
 text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS01'.
SET TITLEBAR 'SALESTTL'.
A L V G R I D
IF o_grid_container IS INITIAL.
 CREATE OBJECT o_grid_container
 EXPORTING
 container_name = 'CCONTAINER1'.
 CREATE OBJECT o_grid
 EXPORTING
 i_appl_events = 'X'
 i_parent = o_grid_container.
FOR first A L V G R I D
 PERFORM set_grid_field_catalog
 CHANGING i_grid_fcat.
 PERFORM modify_grid_fcat_predisplay
 CHANGING i_grid_fcat.
 PERFORM set_grid_layout_set
 CHANGING struct_grid_lset.
 PERFORM sort_outtable CHANGING i_sort_fcat.
PERFORM populate_grid_data TABLES i_grid_outs i_grid_outs_pro.
 SORT i_grid_outs BY year month.
 CALL METHOD o_grid->set_table_for_first_display
 EXPORTING
 i_bypassing_buffer = space
 is_variant = ws_f_grid_disvar
 i_save = ws_c_grid_save
 is_layout = struct_grid_lset
 CHANGING
 it_outtab = i_grid_outs[]
 it_fieldcatalog = i_grid_fcat[]
 it_sort = i_sort_fcat. " Period
ENDIF.
IF o_grid1_container IS INITIAL.
 CREATE OBJECT o_grid1_container
 EXPORTING
 container_name = 'CCONTAINER2'.
 CREATE OBJECT o_grid1
 EXPORTING
 i_appl_events = 'X'
 i_parent = o_grid1_container.
* FOR SECOND ALV GRID
 PERFORM set_grid1_field_catalog
 CHANGING i_grid1_fcat.
 PERFORM modify_grid1_fcat_predisplay
 CHANGING i_grid1_fcat.
 PERFORM set_grid1_layout_set
 CHANGING struct_grid1_lset.
 PERFORM sort_outtable1 CHANGING i_sort_fcat1.
PERFORM populate_grid1_data TABLES i_grid1_outs i_grid1_outs_pro.
 SORT i_grid1_outs BY year month.
 CALL METHOD o_grid1->set_table_for_first_display
 EXPORTING
 i_bypassing_buffer = space
 is_variant = ws_f_grid_disvar
 i_save = ws_c_grid_save
 is_layout = struct_grid1_lset
 CHANGING
 it_outtab = i_grid1_outs[]
 it_fieldcatalog = i_grid1_fcat[]
 it_sort = i_sort_fcat1. " Period
ENDIF.
IF o_grid2_container IS INITIAL.
 CREATE OBJECT o_grid2_container
 EXPORTING
 container_name = 'CCONTAINER3'.
 CREATE OBJECT o_grid2
 EXPORTING
 i_appl_events = 'X'
 i_parent = o_grid2_container.
FOR THIRD ALV GRID
 PERFORM set_grid2_field_catalog
 CHANGING i_grid2_fcat.
 PERFORM modify_grid2_fcat_predisplay
 CHANGING i_grid2_fcat.
 PERFORM set_grid2_layout_set
 CHANGING struct_grid2_lset.
PERFORM populate_grid2_data TABLES i_grid2_outs i_grid2_outs_pro.
 SORT i_grid2_outs BY year month.
 PERFORM sort_outtable2 CHANGING i_sort_fcat2.
 CALL METHOD o_grid2->set_table_for_first_display
 EXPORTING
 i_bypassing_buffer = space
 is_variant = ws_f_grid_disvar
 i_save = ws_c_grid_save
 is_layout = struct_grid2_lset
 CHANGING
 it_outtab = i_grid2_outs[]
 it_fieldcatalog = i_grid2_fcat[]
 it_sort = i_sort_fcat2. " Period
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
 text
MODULE user_command_0100 INPUT.
As the events are registered as application events, control is first
passed to the program's PAI. The call 'cl_gui_cfw=>dispatch' will
forward control to ABAP object event handling and the appropriate
event handler will be called (if present). This allows the user to
selectively process events.
DATA: i_return_code TYPE i .
CALL METHOD cl_gui_cfw=>dispatch
 IMPORTING return_code = i_return_code.
save_ok = ok_code.
CASE save_ok.
 WHEN 'BACK' OR 'END' OR 'CANC'.
 PERFORM exit_program.
ENDCASE.
CLEAR save_ok.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form EXIT_PROGRAM
 text
FORM exit_program.
CALL METHOD o_grid_container->free.
CALL METHOD o_grid1_container->free.
CALL METHOD o_grid2_container->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
 Error in FLush
ENDIF.
LEAVE TO SCREEN 0.
ENDFORM. " EXIT_PROGRAM
If u want get more idea revert back to me.
Thanks & Regards,
Judith.

Can we have two alv grid in the output

Hi
Can we have two alv grid in the output?. If yes how can we do that using oops alv. I think first need to create the container on that two subscreen. is this correct? Thanks.
Regards
Raj

>
Rajitha1234 wrote:
> Hi
>
> Can we have two alv grid in the output?. If yes how can we do that using oops alv. I think first need to create the container on that two subscreen. is this correct? Thanks.
>
> Regards
> Raj
Hi Rajitha,
You can have as many as ALV output in the screen By using OOPS.
By using Container you can pass ALV output.
see the sample Program SALV_TEST_TABLE.
Regards,
Prabhudas

ALV grid on the view keeping stale data

Hi All,
I am creating an application in WDA in which we had decided to simply use tablui component. But later due to the nature of the requirements I decided to switch from that to ALV grid ( mainly for sorting and exporting to excel functionality advantages).
There is a button which when clicked populates the data in the alv grid. ( there is a RFC which exports an internal table with data ) and i use the bind_table method to fill the ALV context node with the data. The Node has been mapped properly from component controller to the interface controller. And the code for populating the grid is written in the Action of the button.
But my problem is after first population of the data in the alv( which works perfectly alright), if i chnage the selection criteria and again click the button my internal table (which is passed in the bind_table method) is getting loaded with new set of data( i know that since i saw the internal table contents by debugging) but the alv grid on the screen is not refelecting the same.
Ive tried using lo_nd_ctx_vn_alv->invalidate( ). here n there but doesnt work at all. In fact if invalidate is used then the ALV grid doesnt populate even once.
The code is as follows :
the node name is ctx_vn_alv.
the data comes from rfc and is recieved in it_alv .
 data lo_nd_ctx_vn_alv type ref to if_wd_context_node.
 data lo_el_ctx_vn_alv type ref to if_wd_context_element.
 data ls_ctx_vn_alv type wd_this->element_ctx_vn_alv.
* navigate from <CONTEXT> to <CTX_VN_ALV> via lead selection
lo_nd_ctx_vn_alv = wd_context->get_child_node( name = wd_this->wdctx_ctx_vn_alv ).
 lo_el_ctx_vn_alv = lo_nd_ctx_vn_alv->get_element( ).
 lo_nd_ctx_vn_alv->bind_table( it_alv ).
Edited by: bhaumik1987 on Mar 21, 2011 1:02 AM
Edited by: bhaumik1987 on Mar 21, 2011 1:13 AM

Hi Bhaumik,
I think no need to write this code to get data using service call..
Just call Execute method in component controller from your view controller.
For example you have a button GETDATA, in on action of this button just call method. (use code wizard ) or
 DATA lo_COMPONENTCONTROLLER TYPE REF TO IG_COMPONENTCONTROLLER .
 lo_COMPONENTCONTROLLER = wd_this->get_componentcontroller_ctr( ).
 lo_componentcontroller->execute_<YOUR EXECUTE METHOD NAME>.
Check this example for more details..
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9cb5d345-0801-0010-6a8e-fc57c23fd600?quicklink=index&overridelayout=true
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a189b0ee583b8be10000000a421937/frameset.htm
Cheers,
Kris.
Edited by: kissnas on Mar 21, 2011 7:12 AM

Fit the ALV grid to the monitor size

Hi all,
Please let me know how i can fit the ALV grid to the monitor size of the user. That is The grids should be layered and expanded to the full width of the users monitor.
Thanks in advance
Jey Sabith Ebron

Hi Jey,
You can fit ALV grid to monitor size by defining the container as docking container.
In this case, you neednot create a custom container .
You can use the following code:
CONSTANTS: lc_height TYPE i VALUE 1200.
DATA: go_container TYPE REF TO cl_gui_docking_container,
 go_alv_tree TYPE REF TO cl_gui_alv_tree.
 CREATE OBJECT go_container
 EXPORTING
 repid = sy-repid
 dynnr = sy-dynnr
 side = 2 " Top
 extension = lc_height
 metric = 1 " Pixel
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5
 OTHERS = 6.
 IF sy-subrc <> 0.
 MESSAGE x398(00) WITH 'ERROR'(100).
 ENDIF.
CREATE OBJECT go_alv_tree
 EXPORTING
 parent = go_container
 node_selection_mode = cl_gui_column_tree=>node_sel_mode_single
 item_selection = c_x
 no_toolbar = ''
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 illegal_node_selection_mode = 5
 failed = 6
 illegal_column_name = 7.
IF sy-subrc <> 0.
 MESSAGE x398(00) WITH 'ERROR'.
ENDIF.
Code above is for ALV tree.
You can define any ALV grid object using docking container.
This will solve your problem.
Let me know if you face any issues.
Thanks,
Nisha Vengal.

How to exclude last page from the total number of pages counter

Hi,
I am customizing the payables remittance RTF template, our requirement is to reset page number to 1 for each payment, i am able to achieve this using "@section"
also we have a requirement to have a summary page at the end, i am able to get this using "start@last-page:body".
issue is last page is also considered in the page counter of the last payment.
i.e. suppose if i am generating remittance for 2 payments which are printing details in two pages and one page respectively, my output will have total 4 pages and it's showing
Payment1 page-1 footer -> 1 of 2
Payment1 page-2 footer -> 2 of 3
Payment2 page-3 footer -> 1 of 2
Summary page-4 footer -> 2 of 2
but i wanted to see
Payment1 page-1 footer -> 1 of 2
Payment1 page-2 footer -> 2 of 3
Payment2 page-3 footer -> 1 of 1
Summary page-4 footer -> 1 of 1
Any idea how to remove the summary page from the page counter.
Rgds,
-Kamal

I'm not sure how it was in Acrobat 9, but in XI you add a Header/Footer and
one of the options it "Page Number and Date Format", where you can select
the format of the page number to add, some of them contain the total number
of pages (such as "1 of n").

PowerShell Exchange 2007 Question To count up the total number of email addresses (view/hidden) per GAL

Hello All:
I am very new to Power Shell and need some help:
I have 224 GAL's on our Exchange System (Ex 2007) where, I need to count the total number of email addresses/display names assigned to each GAL. I am not sure how to set up a for-next loop in PowerShell. I am not sure how to set a input
file/variable, with the names of each GAL. (GAL is Global Address List)
I think it's $GALLIST = 'NameofGal1, NameofGal2, etc thru to NameofGaln' where n is the last GAL in the list.
So I need to now a command which would get all the gal names (Get-AddressList(?) for all the GAL's in the Exchange System and then pipe them into a function to count the number of email addresses.
In making a start with the following code and got stuck:
Get-Mailbox | Where {$_.GlobalAddressList -eq “GAL” -and $_.} | Select-Object Displayname, EmailAddresses, count
Missing or invalid property reference or expression.
At line:1 char:71
+ Get-Mailbox | Where {$_.GlobalAddressList -eq "GAL" -and $_.} <<<< | Select-Object Displayname, EmailAddresses, count
I think I know how to pipe the results to a csv file - with - Export-Csv -path c:\filename.csv - NoTypeInformation.
Please can someone advise. Please help.
Thanks in advance
PS - is there a way to access, read and display variable name and value which stores the number of email addresses/per GAL in exchange 2007 database so you don't have carry out a count exercise. Because this metadata will be in the Exchange DB?
Would this be easier to get?
Started building conditional statement:
Get-Mailbox | Where {$_.GlobalAddressList -eq "GAL" AND {{HiddenFromAddressListsEnabled -eq $True} OR {HiddenFromAddressListsEnabled -eq $False}} |
If {{HiddenFromAddressListsEnabled -eq $True} | Select-Object Displayname, EmailAddresses, count ELSE {HiddenFromAddressListsEnabled -eq $False}} | Select-Object Displayname, EmailAddresses, count
ENDIF
Export-Csv -path c:\test.csv -NoTypeInformation
Will this work? Checking to see how to do a for-next loop.
$GAL = Get-GlobalAddressList
foreach($GAL IN $GAL)
Get-Mailbox | Where {$_.GlobalAddressList -eq $GAL AND {{HiddenFromAddressListsEnabled -eq $True} OR {HiddenFromAddressListsEnabled -eq $False}} |
If {{HiddenFromAddressListsEnabled -eq $True} | Select-Object Displayname, EmailAddresses, count AS "Count of Hidden Addresses" ELSE {HiddenFromAddressListsEnabled -eq $False}} | Select-Object Displayname, EmailAddresses, count AS "Count of
Visible Addresses" |
Export-Csv -path c:\test.csv -NoTypeInformation |
not sure if this works and looks spaghetti -like!

Hi Everton,
In addition, If you want to export GlobalAddressList, please refer to the script below:
$filter = (Get-GlobalAddressList 'Default Global Address List').RecipientFilter
#filter HiddenFromAddressListsEnabled is ture
Get-Recipient -RecipientPreviewFilter $filter | Where-Object {$_.HiddenFromAddressListsEnabled -eq $ture} | Select-Object Name,PrimarySmtpAddress
#filter HiddenFromAddressListsEnabled is false
Get-Recipient -RecipientPreviewFilter $filter | Where-Object {$_.HiddenFromAddressListsEnabled -eq $false} | Select-Object Name,PrimarySmtpAddress
Refer to:
How to Export the Exchange 2010 Default Global Address List (GAL)
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to add a push button in ALV Grid Top-of-page

Is it possible to add a push button to the top-of-page in Alv grid display?if yes, then how? I am not using OO ABAP and am using reuse_alv_grid_display with top-of-page event.

Hi,
I am not sure whether we can add push button in top-of -page or not. But instead of that if you want to add button on toolbar as per your requirement then follow below link. it will useful.
http://www.sap-img.com/abap/example-of-a-simple-alv-grid-report.htm
Ram.

How can we add a button on our ALV Grid

Hello,
I need to add a button on the ALV Grid and write a code on that button to download a file on the desktop of the user's machine.
How can we write a code for the same and what would be the syntax of that code.

Hi,
you should copy the 'STANDARD' GUI status from program SAPLKKBL using transaction SE90 >Programming SubObjects> Gui Status.
ENTER SAPLKKBL PROGRAM
STATUS STANDARD.
exexute.
select standard check box. copy to your zprogram and your gui status.
Enter your Z program name and the name you what for this status - you can keep it as 'STANDARD' to be simple.
then go to se 38 double click on pf status .it goes to me41 screen .
there you can add your button along with predefined buttons on application toolbar.
then write code for button using user command event.
Code:
Form Set_pf_status
Notes: Called by FM REUSE_ALV_GRID_DISPLAY
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTANDARD'.
ENDFORM. "Set_pf_status
In the above case the GUI status copied was named ZSTANDARD and adjusted accordingly, adding and removing the desired buttons. A button was added called '%DELETE'.
3). Create the following report:
Code:
Form User_command
Notes: Called by FM REUSE_ALV_GRID_DISPLAY
       Detects whether the icon/button for
       'Return Tag Deletion' has been pressed. If it has then
       detect whether any rows have been highlighted and then
       set the delete flag.
FORM user_command USING r_ucomm     LIKE sy-ucomm
                        rs_selfield TYPE slis_selfield.
DATA: li_count TYPE I.
IF r_ucomm EQ '%DELETE'.
LOOP AT %g00 WHERE mark EQ 'X'.
    ADD 1 TO li_count.
ENDLOOP.
IF li_count GT 0.
    gc_delete_flag = 'X'.
    r_ucomm = '&F03'. "Back arraow
ELSE.
    MESSAGE W000 WITH 'Please highlight the rows to be deleted!'.
ENDIF.
ENDIF.
ENDFORM. "User_command
*reward points if usefull

How to add a check box in ALV Grid using SAP R/3 release 4.6b?

Hello everyone,
I hope you all fine.
I'm writing because I have a requirement with ALV Grid, what I need to do, is to insert a checkbox into a cell, I already read the forum to know how to do that, but I'm using a SAP R/3 release 4.6b, and when I execute the program the checkbox is displayed greyout, because this release doesn't have the EDIT property into the slis_t_fieldcat_alv.
Does any body know how to enable the checkbox cell in the ALV Grid for this release?, so it will allow the user to mark the desired rows.
I'll really appreciate if you guys could help me to find a solution.
Thanks for your time.
Regards,
Guillermo

Hi,
if you need just a check box for each line, try to get rid of this line from your layout.
g_layout-box_fieldname = 'ZZCHECK'.
SAP uses this field to store info about selected lines. Hence you click on the second check box, you select different line and the first line is erased. You can select more line by holding SHIFT + CTRL
Cheers

How to add excel download button to ALV grid toolbar?

Hi,
Im generating ALV output through the method "SET_TABLE_FOR_FIRST_DISPLAY".But in the output,I cant see a direct excel download button,just like how it used to come when we use FM "REUSE_ALV_GRID_DISPLAY". Here, the excel download option comes as part of a drop down on top.But is there any way that I can have a separate excel download button which will be more user friendly for the customer?
Thanks,
Mahesh

Create your own GUI status and add a push button there. In PAI write code for Excel download for that button.
Regards,
Amit

How can I get the selected rows from two ALV grids at the same time?

I have a program that uses two ALV grids in one dialog screen. I'm using the OO ALV model (SALV* classes).
The user can select any number of rows from each grid. Then, when a toolbar pushbutton is pressed, I'd have to retrieve the selected rows from both grids and start some processing with these rows.
It is no problem to assign event handlers to both grids, and use the CL_SALV_TABLE->GET_SELECTIONS and CL_SALV_SELECTIONS->GET_SELECTED_ROWS methods to find out which rows were marked by the user. Trouble is, this only works when I raise an event in each grid separately, for instance via an own function that I added to the grid's toolbar. So, I can only see the selected rows of the same grid where such an event was raised.
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.
As it is right now, I can have an own button in both grid's toolbar, select the rows, click on the extra button in each grid (this will tell me what entries were selected per grid). Then, I'd have to click on a third button (the one in the dialog screen's toolbar), and process the selected rows from both grids.
How can I select the rows, then click on just one button, and process the marked entries from both grids?
Is it somehow possible to raise an event belonging to each grid programmatically, so that then the corresponding CL_SALV_SELECTIONS->GET_SELECTED_ROWS will work?
Thanks.

Hello Tamas ,
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.--->
is it possible to have a check box in each grid & get the selected lines in PAI of the screen ?
regards
prabhu

Taking download into excel from ALV Grid - header is printing in two lines

Hi All,
I have a scenario where I am taking the download from ALV grid to an excel sheet. Now the header of the ALV (column names) is appearing in two lines in the downloaded excel sheet while items (records of the ALV table) are getting displayed in a single line.
This download is taken from the standard download to local file (spreadsheet) button provided by SAP for ALVs.
I am using function module "Reuse_alv_grid_display" for the purpose.
Can somebody provide an idea how I can avoid the header printing in two lines and keep the length as it is.
Thanks in Advance,
Chandan

Hi..
1. Pass header name in internal table appned first line.
2. after that pass u r data .
3. Use FM. WS_DOWNLOAD
Salil ......
Edited by: salil chavan on Nov 26, 2008 11:07 AM

How to create a secondary list of alv grid inside the function module

Hi All,
My requirement is to create a RFC function module to display the alv grid of one table.
i have created that.
while clicking on the records of the alv it should open the secondary list of another table.
My problem is it is not fetching the records of the internal table of the primary list since it is created inside the function module(FUNCTION...ENDFUNCTION).
pls help me on this.
Thanks in Advance.

hi,
READ TABLE sel_sheet INTO wa_sheet INDEX rs_selfield-tabindex.
here sel_sheet is the internal table for the primary list..
i called the function module "reuse_lav_grid_display" inside Function...Endfunction.
so when i am using READ TABLE sel_sheet INTO wa_sheet INDEX rs_selfield-tabindex.
inside the user command perform therecords in this internal table is not populating..
pls help me on this.
thanks in advance.

Move sign to left of quantity on alv grid with & stil total quantity column

Hi Guys,
Here is my problem.. I have a column on my alv grid that is signed. I want the sign to appear to the left of the number.
This column needs to be totalled so I can't use the function module CLOI_PUT_SIGN_IN_FRONT. I've also tried (as per forum thread) having the field type as TABHIST-DELRATE but this rounds the values and the sign is still on the wrong side.
Any ideas would be gratefully received..
Regards,
Liz.

I think first you need to read
1. USR01-DCPFM for user default decimals values, by giving user sy-uname then go to
2. DDVAL giving USR01 & DCPFM you will get domain values
if domain values X or Y or space arrange the EDIT_MASK accordingly and pass to field catalog.
( Here you can also use fm DOMAIN_VALUE_GET)
May this will you out.
a®

Add a count to an ALV grid of the total number of lines

Similar Messages

Maybe you are looking for