Counting the no. of rows in excel worksheet ??
Dear all,
Using OLE2 in forms6i to upload data from a excel sheet.
But in the process i hv to enter a input from Forms which acts as a loop max value.
Isn't there any method in ole2 to count the no. of records in excel sheet so that
i can load any no of rows without mentioning the loop value..?????
regards,
I think you are using BW3.5, which has this limit.
In BI7, the limit is around 1 million rows.
I do not think it is possible to increase this limit. Its Excel 2003 limit. You can remove some characterstics from query drilldown and then display the result.
Edited by: Pravender on Apr 21, 2010 1:19 PM
Similar Messages
-
Any method of ole2 to count the no. of rows in excel worksheet ??
Dear all,
want to generate a for 1..n loop structure to access the excel worksheet.
iam using ole2 to upload data from excel to oracle.
rest is fine..
till now iam arbitrarily inputting a value as a count from forms to run the loop.
want to know is there any method of ole2 to count the no. of rows in excel worksheet...???
regards,If you have purchase order number in your cube then you can use the easiest method of all of counting -- a calculated key figure with exception aggregation.
Create a CKF and add any basic key figure to it from your cube (basic means a key figure from the cube, not another CKF or RKF). If you're using the 3.x query designer then click the Enhance button and set the exception aggregation to Counting All Values. If you're using the 7.0 query designer then click on the Aggregation tab and switch the Exception Aggregation to Counter for All Detailed Values. With either query designer set the reference characteristic to your PO number characteristic. This CKF will count the number of PO documents.
See this document for step-by-step instructions: [How to... count the occurrences of a characteristic relative to one or more other characteristics|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7e58e690-0201-0010-fd85-a2f29a41c7af]. -
Want to count the number of rows of analysis item in WAD Template
HI all,
Detail Description:
In my WAD report, i have a Export to Excel Option. But I want when I click on this button, one pop up will come only if no of rows of the Analysis Item is Greater than 10,000 ask for Do you want to proceed or not.
Means 1st i want to count the no of rows in the Analysis Item, after that it will check, if the no of rows is greater that 10,000. then the pop up will come.
Question:
Does anyone know, "how to count the no of rows of the analysis Item ?" . It will be better if you know you to implement this with the help of java script.
Means there must be some varible, which counts the no of rows. If you know then please help meHi,
Please find the below link which helps you to get solution of your question.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0bbb20f-2d7e-2e10-258f-8655daa41fab?QuickLink=index&overridelayout=true
It is mainly used to automate queries, web templates, and reports in different output formats like PDF, Excel,
XML, XHTML, and HTML
How to see WAD reports on browser:
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Web Application Solutions: A Designer's Guide
http://www.lukew.com/resources/webapplicationsolutions.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
Feautures of WAD in 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
Regards
Sudheer -
How to count the number of rows in a cube!!??
Experts,
I can somebody tell me how do I count the number of rows in my cube when i am using listcube???..
Thanks
AshwinHi,
have a look ath this theard too
Number of Records in Cube
regards -
How to count the number of rows in a resultser object?
hi there
how to count the number of rows in a resultser object which may contains millions of rows? besides using a while loop? thanksYou don't, you execute a query whose result is the record count of those records that match the search and then you execute the actual query to create your record set. Typically you do
select count(id) from YourTable where [filter]
from the resulting ResultSet do
int res.getInt(1);
which gives you the count and then
select id from YourTable where [filter]
to produce the actual result set.
in the second query the id part can be substituted with the actual fields you want. -
Count the Number of Rows in Data form
Hi,
I want to count the number of rows in a data form.In my form there is a large number of rows.Is there any way to count it.
Thanks.If you are on 11.1.2.x then you could look at adding a formula and using the CountA function - http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin/apcs03s06.html
Otherwise it would be possible using custom javascript which you would have to had some experience in using.
Cheers
John
http://john-goodwin.blogspot.com/ -
Count the no. of rows in a column
I want to count the no. of rows in APR_QTY column that are not equal to zero.
SELECT DISTINCT
SUPP_NAME,
ITEM_NAME,
(CASE WHEN BH_CAL_PERIOD=4 THEN TO_NUMBER(BI_QTY || '.' || BI_QTY_LS) ELSE 0 END)APR_QTY,
(CASE WHEN BH_CAL_PERIOD=4 THEN BI_RATE ELSE 0 END)APR_RATE,
(CASE WHEN BH_CAL_PERIOD=5 THEN TO_NUMBER(BI_QTY || '.' || BI_QTY_LS) ELSE 0 END)MAY_QTY,
(CASE WHEN BH_CAL_PERIOD=5 THEN BI_RATE ELSE 0 END)MAY_RATE,
(CASE WHEN BH_CAL_PERIOD=6 THEN TO_NUMBER(BI_QTY || '.' || BI_QTY_LS) ELSE 0 END)JUNE_QTY,
(CASE WHEN BH_CAL_PERIOD=6 THEN BI_RATE ELSE 0 END)JUNE_RATE,
(CASE WHEN BH_CAL_PERIOD=7 THEN TO_NUMBER(BI_QTY || '.' || BI_QTY_LS) ELSE 0 END)JUL_QTY,
(CASE WHEN BH_CAL_PERIOD=7 THEN BI_RATE ELSE 0 END)JUL_RATE
FROM
OM_SUPPLIER,
OM_ITEM,
OT_BILL_HEAD,
OT_BILL_ITEM,
OT_BILL_ITEM_TED
WHERE BI_BH_SYS_ID = BH_SYS_ID
AND SUPP_CODE = BH_SUPP_CODE
AND ITEM_CODE = BI_ITEM_CODE
AND BH_SYS_ID = ITED_H_SYS_ID
AND BI_SYS_ID = ITED_I_SYS_ID
AND BH_TXN_CODE='SBRLRAW'
GROUP BY BH_CAL_PERIOD,BH_TXN_CODE,SUPP_NAME,ITEM_NAME,BI_RATE,BI_QTY,BI_QTY_LS
ORDER BY ITEM_NAME
Message was edited by:
yogeshylSelect sum(decode(apr_qty,0,0,1)) as cnt_apr_qty
from ... -
Count the number of rows in a workbook.
Hi Experts , I have a requirement to count the number of rows in a WorkBook.Will it be possible to do this by creating a KeyFigure?Or are there any options in BEx to count and display the number of Rows.Many thanks for all your help.
Hi
In the query create a calculated key figure called 'Count' and put a formula as =1, then use this count where ever applicable..you can very well count the no. of rec.
with this.
Hope this helps..
assign points if useful..
Cheers,
Pattan. -
Count the no.of rows without using count function
Hi,
How to count the no.of rows without using the count function?
Thanks,they won't be 100% accurate. You're correct, Bluefrog, but the same goes for doing a count(*) (depending on the size of the table, ofcourse):
the table being queried might be under DML (deletes/inserts), and the next count(*) might give different results.
Both approaches will never be 100% accurate.
But simply selecting num_rows will be much much faster than doing a count(*).
Counting the number of rows always reminds me of this ongoing discussion, by the way:
http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:127412348064#14136093079164 ;)
Usually knowing the number of records by approximatly is sufficient, imo. 1000000 or 1000007 records: I don't care, don't need to know that.
I've never needed to know the exact number of records in a table in my code, or been given a requirement that forced me to. -
Count the number of rows resulting from a select statement
Hi,
Is there any way of counting the number of rows resulting from a select statement. i.e I have a select distinct statement and I then want to perform an IF statement on the number of rows resulting from the select statement.
Any help appreciated
Thanks
GaryDeclare
var1 number;
Begin
select count(distinct column_name) into
var1 from table_name;
If var1 > x Then
End IF;
End;
Hope I understood the problem correctly
null -
Count the number of rows inserted
Hi,
Is there a way to count the number of rows processed post DML in PL/SQL?
For eg,
BEGIN
INSERT INTO TMP1
SELECT * FROM EMP;
a function to count the number of rows inserted into tmp1SQL> set serveroutput on;
SQL> begin
2 insert into tmp1 select * from emp;
3 dbms_output.put_line(SQL%ROWCOUNT||' rows inserted');
4 end;
5 /
15 rows inserted
PL/SQL procedure successfully completed. -
How to count the number of Rows to be Updated before Update takes place..
Hi all,
I have a requirement, where i have to count the number of rows to be updated before updating it. SQL%ROWCOUNT gives the no. of rows updated ( after update takes place). How do i get to know the count of no. of rows to be updated/inserted/ deleted. I was looking for a simple solution, as above SQL%Rowcount. But i couldn't find any. I can use a Function and Return the value which will give me number of rows to be updated, But is there any Simple Logic other than this.. or any count function. Your Help is Appreciated. Thanks!If you really want to do this (I have no clue why you would need it), then you can piggy back on any existing pessimistic locking you may already have in place.
However, it would require two loops through the records of which you want to know the count before you update, and a second pass to update them.
I would really re-think the need for this, though.
SQL> create table t0304(c number);
Table created.
SQL> insert into t0304 select rownum from all_objects where rownum <= 10;
10 rows created.
SQL> commit;
Commit complete.
SQL> select * from t0304;
C
1
2
3
4
5
6
7
8
9
10
10 rows selected.
SQL> declare
2 cursor mycursor is select * from t0304 where mod(c,2) = 0 for update;
3 i number := 0;
4 begin
5 for r in mycursor loop
6 i := i + 1;
7 end loop;
8 dbms_output.put_line(i);
9 for r in mycursor loop
10 update t0304 set c = c + 20 where current of mycursor;
11 end loop;
12 end;
13 /
5
PL/SQL procedure successfully completed.
SQL> commit;
Commit complete.
SQL> select * from t0304;
C
1
22
3
24
5
26
7
28
9
30
10 rows selected.
SQL>Edited by: Steve Howard on Mar 4, 2011 5:57 PM -
How to count the number or rows in file
Hi Experts,
I am file as source and Oracle as target. My file containing the some data which is going to load to the target.
My requirement is that I want to count the number of rows which my file contains. Please help me how to count the total number of rows in file.
Thx,
Sahadeva.Hi,
You won't give a name DEST_USER_NAME:ODI will get these information.
it is important Command on source and Command on Source side .
-Pls write jython code on Command on Source side
-And Command On Target side Choose technology as Oracle and set logical schema to HR_logical
Sorry my mistake.İt is related jython syntax.Here is code:
import java.lang as lang
import java.sql as sql
import java.lang.String
import os
lang.Class.forName("<%=snpRef.getInfo("DEST_JAVA_DRIVER")%>")
cons=sql.DriverManager.getConnection("<%=snpRef.getInfo("DEST_JAVA_URL")%>", "<%=snpRef.getInfo("DEST_USER_NAME")%>", "<%=snpRef.getInfo("DEST_PASS")%>")
dblinks= cons.createStatement()
file1=open('EMP.txt','r')
count=0
line=file1.readline()
while line !='':
count+=1
line=file1.readline()
file1.close()
sqlQuery = "insert into HR.ETL_FILE_LOG (FILE_COUNT) values (count)"
rqQuery= dblinks.execute(sqlDBLink)
cons.close()
Regards -
Count the number of rows based on the values!!!
Hi all,
What I am using:
I am working with a multidimensional database in Visual Studio 2010 using its Data source view and calculation member and dimension usage.
What I want to do:
I have a fact table that has five columns(leg(s),hand(s), Head and body,overall) that shows the category of how severe the injury is. Let say for the records all columns never have an empty value(no injury is stated with 'No injury' ) . These five columns
are connected with a dimension that has all the available values (Category A-E of injury).The overall has the most severe from the other four columns. I want to create a bar chart with five different measure
values, one for each column, and count the values in those columns.
For example : I have a slicer in the excel and a bar chart and the slicer has all the values of the Category of the injury ( Cat a,Cat B, Cat C, ... Cat E, No injury ) and when i select one of them, lets say
Cat C, the bar chart should update and show how many Cat C each measurement column has.
Example FACT table:
ID LEG HAND HEAD BODY OVERALL
1 No A No No A
2 No D C C C
3 E C D A A
4 E E B C B
So if i selected C the bar chart will count (Leg = 0, Hand = 1, Head = 1, body = 2 and Overall = 1).
Any ideas ?
Thanks for the help and the time :)Hi DBtheoN,
According to your description, you want to create a chart on excel worksheet to count the rows based on the value, right? If in this case, I am afraid this issue is related to Office forum, I am not the expert of Office, you can post the issue on the corresponding
forum.
However, this requirement can be done easily on SQL Server Reporting Services. You can using the expression below to count the rows.
=COUNT(IIF(Fields!LEG.Value=Parameters!TYPE.Value,1,NOTHING))
Regards,
Charlie Liao
TechNet Community Support -
How to populate the last empty row in Excel without using Report Generation Kit
I wrote a Labview SUb Vi that uses Report Generation Toolkit that is not loaded on the test stand. I am looking to convert it from Report Generation Vi like New Report, Append Table to Report, Dispose Report. The tunneling through all the report generation Vis seems extensive. Code is attached. Thanks, Greg
GregThank you that was a big help...
I used the Excel Forum to get a lot of great ideas. My code is almost working.
There is a 2-D String Array that represents the String data that I am exporting to the Excel File Sheet 1 - 5.
I am attempting to determine the last populated row in sheet 1 then populate the next row of Sheet 1. Since all 5 sheets are populated every time, I should not have to search every sheet for the last row.
I am getting two row populated on sheet 1 with seeming the same data.
I found an AXExcelWrite2D ArrayWorksheet.vi that I thought would work. I think there is a Table determination that is causing me problems. The link is http://lavag.org/topic/13324-labview-and-excel-activex-or-ado/. The Application Invoke Node has a convert formula with "FromReferenceStyle" with R1C1 Attached to it. I am not sure what this function is doing. When I try to bring the function help up, there is a missing file.
I am including both the new active x vi and the report generation vi. Report Generation VI works.
I would appreciate any assistance I can get on this.
Thanks
Greg
Greg
Attachments:
REPU Test Data Population using Active X Write Save.vi 92 KB
REPU Test Data Population.vi 60 KB
Maybe you are looking for
-
How to connect a plasma panel digitally to Qosmio F10-130
Hi, I just orderer the F10-130 and I would like to connect my plasma panel with a digital video signal. The monitor has a DVI input, and the F10 has a so-called "D-Video out" interface that I've never seen before. What's the best way to connect the t
-
Hello, I am working on a implementation project. The legacy system is oracle apps 11.5.10 and new is R12. I have to work on AR Invoice conversion where we have to select all the open invoices and convert them over. Can i get a query for all the open
-
What to do if it is telling me I have "Insufficient Permissions?"
Well I've been having several problems. First is when I go to install it I get a screen saying that the file "C:\Windows\System\32\Macroomed\Flash\NPSWF32.dll:5" could not be written due to insufficient permissions. I have no idea how to fix this or
-
Can a macbook pro 13' LED display early 2013 get screen burn
just the question above. can this happen like with the icon docs and stuff?
-
I have a iphone 6 wont take all calls says mail box not setup but is set up help please
i have a i phone 6 wont take all calls says mail box not setup but is set up help please