Course and Attendee Appraisal

Hello Experts,
Need your advice as I am confused.
We have created appraisal templates for Course Appraisal and Attendee Appraisal.
In order to create relationship between Course and Appraisal which relationship do we create using transaction PP01 ?
a) Is it A608 to assign a valid appraisal template to Course ( the system displays message "Object 01 VA 5000NNNN does note exist".)
or
b) ( A057 ) and / or ( A058 ) .
When attempted to create relationship between Course and appraisal template ( A057 ) an error message is displayed stating " Between type D and VA relationship A057 is not allowed --> T777E ).
We can customise the relationship in table T777E, but is that a right way forward?
<b>Can you please advise what is the correct procedure to assign appraisal template to Course to conduct a) Attendee appraisal b) Course Appraisal.</b>
Please treat this as urgent.
Kind regards
George

Hi Zsolt,
Many thanks for your guidence, we've as suggested we checked the following :-
Check these steps to rectify the problem:
- entry HAP00 REPLA (in table T77S0) should be 'A' or 'T' ==> Entry exists 'A'
- the action D/DC - A608 - VA should exist to allow to relate the appraisal model directly during the creation of the training type
(transaction OOMT) ==> Created the action however, I feel without this action, if we ensure the relationship is created manually using PP01 it should meet the requirement.
For one of the courses & Appraisal Template we've created relationship A608 for in Planned Status.
- appraisal catagories must exist for the training appraisal ==> Appraisal categories are available
- appraisal formular must exist for the training formular ==> Appraisal template is available for training evaluation.
- the ID of the appraisal formular must be maintained in HRLSO TEMPL (table T77S0) ==> Appraisal template object ID is entered, record exists in T77S0.
But still the training evaluation template is not appearing in ESS.
Any further advise ?

Similar Messages

Attendee Appraisal

Have anyone done the setting for attendee appraisal where in the "Form of Appraisal" follow combination P - P as defined in example 1 in the detail Documentation? it is then related with the chosen evaluation path A and evaluation path B in the detail customizing.
+Example 1
Form of appraisal Appraisers Appraisees
Personnel appraisal Supervisors Employees
Possible Combinations
Appraisers Appraisees
P                   P
US                P
P                  US
US                US
The settings in the example above would result in the following:
Appraisers and appraisees must be of the object type Person or User
Object selection for appraisers and appraisees is restricted to objects of the object types Person and User
In the appraisal, the appraisers are referred to as Supervisors, and the appraisees as Employees
Note
If you select the object type User, the system proposes the current user as the appraiser when you create an appraisal.+
I thought haven't found the right evaluation path and i received message "The 'to do' list is empty" as below.
+The 'to-do' list is empty
Message no. PQ723
Diagnosis
No target objects were found that match the selection criteria and evaluation path specified.
Procedure
Check over the selection criteria, or check the evaluation path in Customizing. For further information on the evaluation path, refer to the Implementation Guide (IMG) for Personnel Development (step: Edit Form of Appraisal).+
anyone can give me a clue of the evaluation path A & B i should use to activate Person to Person attendee appraisal?
best regards, pei pei

Hi ,
can u send me the recording and coding for the same T Code pv34.i need imme ..i joined as a fresher no is there to help me .

TEM Configuration of Attendee Appraisal

Can anyone help me with the configuration of attendee appraisals?
I have the following forms of appraisal in the system:
2     Business Event Appraisal
3     Attendee Appraisal
for BE appraisal Attendee is the appraiser
for Attendee appraisal the BE is the appraiser
Possible combinations for 2
AP     E     B025     A025
H     E     B025     A025
KI     E     B025     A025
P     E     B025     A025
PT     E     B025     A025
US     E     B025     A025
Possible combinations for 3
E     AP     A025     B025
E     H     A025     B025
E     KI     A025     B025
E     P     A025     B025
E     PT     A025     B025
E     US     A025     B025
the ff switch is on
SEMIN     EVAEV     00000002     Business event appraisal
SEMIN     EVAPA     00000003     Attendee appraisal
The BET relationship for appraisal (has event appraisal, has attendee appraisal) is maintained.
When i go to PV33, for Attendee and Business I'm getting the same appraisal form for both: the Business Event Appraisal.
I can't get the Attendee appraisal form to show.
Can anyone show me how to config TEM appraisals?
Thank you.
Clueless Noobie
Edited by: Clueless Noobie on Jun 15, 2010 3:49 PM
Edited by: Clueless Noobie on Jun 15, 2010 3:49 PM

Hi Olekan,
to do the assignment with several Appraisal models to one BET is not this easy thing. Let me explain you why:
You can assign to one BET two different app. models ->
> BE appraisal
> Attendee appraisal
These are related to the BET with different relationships. The point now is that you can assign with PE transasction (PVD0) ONLY ONE APP.MODEL TO ONE BET WITH THE SAME RELATIONSHIP.
Theoretically you can do more by changing the Time constraint of this relationship. I think you will be able than to assign more App. Model in PP01 after changed the Time constr. BUT THIS IS NOT A PE TRANSACTION. Whether the application will enable you to choose from these realted objects while running it is not sure. This is a design issue, that the PD transaction (PP01) and the PE transaction (PVD0) don't have the same logic.
I can show you another example to understand my point of view:
if you create a Web-link to the Event in PE transaction while creating an event you are able only attaching one link. BUT if you do maintaining in Change modus on the event in PP01 you will be able to assign more Web-links..
In this case the situation works, you are able to page between the links later, the multi-assignment is accepted by the app.
Please check whether in our case the app. accepts the multi assignment with PP01 and whether you are able to show on ESS portal side the option to choose.
Best regards,
Zsolt
null

Where can i find a complete course and some samples about using java card !

hello !
i am new to java card and i am seeking for complet course and samples of how i can use this new developement kit and to get familiarized with it !
any help will be very appreciated
thanks

i have got t JCDevKit_User_Guide.pdf this file describes the using of jav card ! but when i tried to execute what it said on dos i did it succifully but i could not see the result? i mean is there an applet to se or to integrate in an html file or to use elswhere?
i mean , how nomalaly can i use the files generated in the sample �? where to integrate them and where to use them?
please help me and excuse my exhaustive questions!
thanks

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
Customized Progress Indicator - Captivate blog
If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

Trying to take an online course and the site cannot open due to browser configuration

we are trying to take an online course and every time i try to log on it says "unable to configure browser" I downloaded firefox as in structed.

Please tell us concisely:
* What you did
* What happened
* What you expected

How to create separate Meeting Workspaces and attendees of the meetings from subsequent Meeting Workspaces and it's Attendees

Hello Community
    I created an "objective" and "Agenda" in a Meeting Workspace and added
"Attendees".
    Later on I created another "objective" and "Agenda" in a Meeting Workspace
but, the "objective/Agenda" and Attendees from the last "objective/Agenda" remain visible.
    The question is how do you create an objective/Agenda and apply the
attendees that will attend that "Meeting Workspace" and then later create
another "objective/Agenda" and enter the "Attendees" to that new Meeting Workspace?
    Note: Another way to ask the question is how do you separate and save
each Meeting Workspace its "objective/Agenda" and its attendees subsequent
objective/Agenda and its attendees so that you can see each individual meeting
and the attendees of that meeting?
    Thank you
    Shabeaut

Hi Shabeaut,
We could create/link to a meeting workspace when we create a calendar event as I posted above, we could also create a meeting workspace without creating an event.
http://office.microsoft.com/en-us/sharepoint-foundation-help/create-customize-and-delete-a-meeting-workspace-site-HA010378262.aspx
Here is the reference for Decision Meeting workspace:
http://techwirenews.com/2013/01/15/using-decision-meeting-workspace-in-sharepoint-2010-office-365-part-ii/
In most cases, each meeting workspace is dedicated for certain meeting event in one to one relationship. You need to create difference workspaces for differenct meetings.
Regards,
Rebecca Tu
TechNet Community Support

Want to know about SAP course and SAP modules

I am Sandeep, done BBM and have 3 years experience as Medical Representative(Pharma sales), and i'm perusing MBA in Sikkim Manipal University Distance Education, i came to know that SAP course has lot of scope in major industries, so that want to know about SAP course and SAP modules available and which module is suitable for me and details about the cost, duration of course please guide me
Message was edited by: Colleen Lee - moving from Careers space to Training and Education.Also removing the bold text formating

Ashok,
Hi! Excellent that you are take the next steps in your education and applying them to work experiences.
The best approach in taking SAP-related courses is to contact the university and confirm their approach. View SAP UA member schools here - http://uaaroundtheworld.informatik.tu-muenchen.de/overview(bD1lbiZjPTEwMQ==)/start.htm
...and assess the ones in the UK which does include Brunel.
Ask if they provide SAP-related curricula (or supplements) and hands on SAP software in this course or others that you can take in your program.
Best regards,
Richard

I am taking an online course and need to download instructional videos from the site how do i do this

I am taking an online course and need to download the videos to my Imac. How do I do this....new to the mac world

Did you look in your downloads folder? If you are using Safari to download then look at Safari - Preferences - General and look in where it says Save downloaded files to. If you have left it to the defaults download folder you will find that under ~/downloads the ~ means your home folder. You can find that in Finder.
I know you are to OS X so you are probably just unlearning some old bad habits. I'd recommend book marking and using:
Mac 101
Switch 101
Find Out How Video tutorials
List of Useful URLs for switchers

Bulk courses and students via api

Hi all,
We are using Adobe Connect Pro v 7 at our organization. We
have courses that registered users can watch, and connect tracks
whether they watched it or not. Simple enough.
Then we have a web site that uses the api to generate reports
on usage. We typically want to do 2 things:
1-Get a list of all courses either before or after a specific
date
2-Get a list of all courses either before or after a specific
date and a list of all students who took the course and whether
they passed or failed it
I have been unable to figure out an elegant way to do this,
especially part 2. Right now we make a call to sco-info once for
each course to see if it is in before or after the target date, and
then need to call another api to get all the students that took the
course. Since this involves several round trips from our web server
to the breeze server, it is not exactly blazing fast.
Is there a better method for doing this?
We just recently upgraded from v6, so perhaps something in
the new api version can do this? (Though I did not see it in the
online documentation.)
Thank you for your time.

Hi Yemi, Woil,
3 options here;
- Keep retrying to delete via Eloqua GUI to delete all records. If this fails;
- Contact Eloqua support to get them deleted (we did this before for CDO's containing 1M+ records)
- Use a combination of REST and SOAP;
First, get the data cards from the CDO (/data/customObject/<id>?count=XXX)
Use the results to call the SOAP Delete endpoint with the DataCardSet containing the ID's from your previous call.

Predefined appraisal process and flexible appraisal process

Hello
I read the new presentation about the New in Performance Management (SAP enhancement package 4
For SAP ERP 6.0) I don't understand the connection between predefined appraisal process and flexible appraisal process.
Can I use these 2 processes together?
Is the new "Predefined Performance Management Process: Calibration" work with flexible appraisal process or this is 2 different system and process?
For example This process of predefined appraisal compare "final appraisal" of workers. Where this "final appraisal" is stored . In which question of the appraisal form ?
In the presentation Sap wrote "Team calibration based on overall appraisal". What is "overall appraisal" in terms of appraisal form ?

Hi,
so to answer your questions:
Can I use these 2 processes together?
No these are 2 different functionalities. The reason they were delivered at the same time is because they are using the same technology (web dynpro)
Thus the 'calibration' which is designed for Predefined does not exist for Flexibe.
So with EHP4 SAp delivered the new Predefined functionality
and the Flexible which is basically the same functionality as before but using web dynpro instead of BSP page.
Regarding "Team calibration based on overall appraisal". This functionality allows manager to compare the individual appraisal documents of the employees that reports to him.
You can find some more information on these fucntionalities in SAP help link below
http://help.sap.com/erp2005_ehp_04/helpdata/en/cd/dae8a24ab011d18a0f0000e816ae6e/frameset.htm
Hope this help
Sarah

HT5349 I just started a course and I recieved an iPad as part of the course ait has all profiles on it what would happen if delete them all

I started a course and I received an iPad as part of the course but it has all these profiles on it what happens if I delete them all will my IPad crash

Hi
Unfortunately this is the forum for OS X Server and you really should be asking the question in the iPad Forum here:
https://discussions.apple.com/community/ipad/ipad_in_the_enterprise
The profiles are most likely related to accessing the network and possibly some other(s) restricting use of camera etc. Generally in some environments you won't be allowed to remove them but if the option is there and you want to, then there's nothing stopping you.
However.
If you do remove them then you probably won't be able to access the network. If you want to participate in the lessons where the iPad is used then your ability to do so may/will be hampered in probably a major way.
My 2p. Leave things alone and concentrate on your education. You're there for a reason and it's not removing profiles from an iPad.
HTH?
Tony

OS/DB Migration - Course and certification for SAP Netweaver 7.00

Hello everybody,
The OS/DB migration course and certification is still based on SAP Web Application Server 6.40, which is a rather old platform, since SAP Netweaver 7.00 is available since 06.2006 as far as I know
There is a particular reason for this delay? Can anyone know when the education offering from SAP will cover the new Basis release?
I'm interested in this field of technology, but if I know that the new course will be available too far in the future, I will focus on other certifications for now
Regards,
Valerio

I am sorry for getting into someone's topic but I would like to clarify few things.
As I understand the information related to the course description is outdated. Although the course currently provided by sap consists of the actual info. And whether that information is reflected in a course book?
What about the examination?
Does it still consists of old questions and corresponds to description at training.sap.com(<AS 6.40) or it does include updated questions related to the latest SAP versions.
And what about the training materials issued by sap for that course?
Same question here. Whether it holds the actual information and consists of latest techniques and descriptions.
I am planning to take the certification w/o taking a course. I have a training material from one of my colleagues who has kindly shared a book with me. He has taken the course some time ago and his book states:
SAP Web AS 6.40
2005/Q3
so I am worried about the consistency of that book. And I would like to be sure before going to exam that there will be no surprise for me by having non-expected questions.
If someone can comment this that would me much appreciated.
Thanks.

HT1338 ently started a new course and have to submit my work in word. What is the easiest PDF to word. or get word for mac?

Hi, I am using Pages O9 with Endnote X4, I have recently started a new course and have to submit my work in word.
What is the easiest way? PDF to word or get word for mac?

A document created in Pages must be translated during export into MS Word .doc format. As Pages is not an MS Word clone, it may allow you to create document content that upon export, is partially or wholly incompatible with Microsoft Word.
Rather than wait for this potential, unpleasant surprise, you should consider using MS Word from Office for Mac 2011. The faculty may be using MS Office on Windows, or the Mac version. Paper submissions usually are time consuming and important for the course grade. Why gamble?

Modules within a Course and Credit for Complete

I am in the midst of designing CBT courses that will be taken
by the masses. I was thinking of designing the courses with modules
within them. There will be some users that will be required to take
al the modules and others that will required to take less than all
the modules. With that design in mind, how could I design the
course so that the users that need to take less than all modules
can get credit for the entire course and those that need to take
the entire course get credit as well. The LMS does not allow us to
assign users to the module level, it only assigns courses to users.
The only other way I was think was to make each module a Course.
If anyone has any thoughts or ideas or knows of a function
within Captivate that allows us to do what we're thinking, that
would be great. Each of our Captivate courses could have 3 or more
modules.
Thanks for your help!

I don't think you're going to be able to do that with
Captivate's
default functionality.
This is, IMO, ideally done at the LMS level. Terminology
varies but I
assume a Course consists of Lessons. Each lesson is a Content
Package
(zip file). If it works that way in your LMs, setup two
courses. Course
1 has all the modules (lessons) and Course 2 has 'less than
all the
modules'. Then assign the course to the appropriate users.
If, in your LMS, a 'Course' is a content package, then can
you group
courses into any other sort of group, then assign users to
the
appropriate grouping?
If you just can't do this in the LMS, then you could do this
all at the
lesson level but it'll take more programming power than CP
provides (I
think, I'd love to be proven wrong!).
Erik
lindy456 wrote:
> There will be
> some users that will be required to take al the modules
and others that will
> required to take less than all the modules. With that
design in mind, how
> could I design the course so that the users that need to
take less than all
> modules can get credit for the entire course and those
that need to take the
> entire course get credit as well.
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips!

Course and Attendee Appraisal

Similar Messages

Maybe you are looking for