CPI : Duplicate "site groups" after upgrade

Hello,
We encounter a duplicate entry for "site groups" after upgrade from Cisco Prime Infrastructure 1.2 to PI 1.3.
This is visible under the Lifecycle view.
Have you ever seen this issue ?
Anyone know how to remove one of it without losing data ?
Thanks in advance,
Kind regards,
Cedric

Hi Livio,
Sorry but we haven't find any solution at this time... But I found the following bug which is open for the CPI plateform from 1.3 :
"CSCue76386 - After Restoring PI DB, duplicate site group are displayed in DWC"
There is no workaround a this time.
Regards,
Cedric

Similar Messages

  • CSA 5.0 Clients Losing Groups after upgrade to .186

    After upgrading to the 5.0.0.186 release, I have several servers that will not remain in thir groups, even after being added to them several times. It seems to happen after they are rebooted. A Critical Error is generated, saying no policies are being enforced on these host, and when you check the groups, they have no group memberships at all.

    I am running 5.0.0.189 and am having the same problem. I have several hosts on my network that re-register every time the machine is rebooted. The only correlation I am able to determine, is that the hosts having the problems have had CSA agent removed then reinstalled. Is there a possibility there is a registry key that is not being updated or completely removed, prompting the machine to register? I have also tried new agent kits, but the registration does not seem to stick. This makes it difficult to modify group memberships if at time of reboot the host re-registers and assosicates itself to the groups of the original agent kit.

  • Duplicate Document Numbering after Upgrade

    Hi! Can anyone please help me to find-out a resolution for the Duplicate Document Numbering found after the SAP B1 upgrade from 2007 to 8.8?
    This report has been found from the Administration -> Utilities.

    The previous company database was a trial database, but the production version of the same is showing the following (missing & doubled) List in "Check Document Numbering -> Document Serial Numbering List"
    Missing List - 52 rows (a sample from the top is given below) -
    Document     Number     To Number
    Checks for Payment     1     3931
         3933     6925
         6932     6932
         6963     6963
         7014     7014
    and in right had side in the same as above way, the Doubled list - 16 rows
    BUT I have check the "Checks for Payment Documents" the documents there shows their "Check Internal ID" 1 to 691. Then from where the above numbers have been detected by the system?
    ANOTHER INTERESTING FACT IS THAT THE above testing I have done on SBO 8.8 PL12, hence I have got the "Upgrade Control Report" as well .... and this showing the following "Non-matching quantities" -
    #     Table     Records Before     Records After
    1     OINM     20284     17342
    I have checked the upgrade log-file ... there were no errors. BUT at the time of "Pre-upgrade check" of this company database the warning "common database version differs from the company database version" always.

  • Entourage (2004) creates duplicate inbox messages after upgrade to Tiger

    I recently upgraded to Tiger in order to sync my iphone.
    All works well except incoming mail messages duplicate themselves in my Entourage Inbox.
    Some of the duplicate messages cannot be opened completely and cannot be deleted.
    I unsuccessfully searched Mactopia for a patch.
    I sync with an Exchange server at my office and had no problems with Panther.
    Also I do not get the duplicate emails on my iphone or my MS Outlook Web Mail.
    Any help is greatly appreciated.
    Paul

    I had the same issue. I found that I had two entries under my account settings, which pointed to the same mail server. Once I deleted one of the accouint entries, the problem has been resolved.

  • DPM 2012 Cannot modify or create protection groups after upgrading from DPM 2010

    Hi,
    We have recently upgraded from DPM 2010 to 2012.  Since the upgrade we have been unable to create new protection groups or add new datasources to an existing group.  Existing backups are running without errors. 
    We have tried checking the DPM sql user account permissions as described in
    this article but with no luck.  More searching has not provided any other relavent fixes.  We are now stuck on how to troubleshoot this any further.
    In the DPM console we get the following error adding a VM to an existing protection group:
    Modify protection group: Virtual Machines failed:
    Error 207: An unexpected error occurred on DPM server machine during a VSS operation.
    Error details: VssError:Shadow copying the specified volume is not supported.
     (0x8004230C)
    Recommended action: Retry the operation.
    Allocate Replica For \Backup Using Saved State\Cacti failed:
    Error 207: An unexpected error occurred on DPM server machine during a VSS operation.
    Error details: VssError:Shadow copying the specified volume is not supported.
     (0x8004230C)
    Recommended action: Retry the operation.
    In the event log we see:
    The description for Event ID 955 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    The consistency check resulted in the following changes to SQL Server Agent schedules: Schedules added: 1 Schedules removed: 1 Schedules updated: 0.  
    Problem Details:
    <ConsistencyCheck><__System><ID>26</ID><Seq>1534</Seq><TimeCreated>23/04/2012 09:33:29</TimeCreated><Source>SchedulerImpl.cs</Source><Line>719</Line><HasError>True</HasError></__System><Tags><JobSchedule
    /></Tags></ConsistencyCheck>
    the message resource is present but the message is not found in the string/message table
    Thanks in advance for any advice.

    Hi,
    The error 0x8004230C VSS_E_VOLUME_NOT_SUPPORTED: Shadow copying the specified volume is not supported, can only come when trying to enable shadow copies on new volumes created when trying to add new datasources to protection.   Generally speaking
    Only NTFS volumes greater that 1GB with a minimum of 300MB free space can be shadow copied, so something is going wrong with the volume creation / format process.  Please investigate that, see if two new volumes get created when protecting a new data
    source, and the sizes are greated that 1GB and also verify it's formatted NTFS.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Edit/Display form does not show site columns after upgrade

    https://social.technet.microsoft.com/forums/sharepoint/en-US/580111d4-72ca-4193-87ab-1dfd6082fa88/document-set-library-column-not-showing-up-on-edit-form
    Hi all,
    I don't think this is related to the above question, but the linked "solution" is as good as I can come up with, however it looks like its possible that ALL the libraries in the collection are suffering the same situation...
    WHATS HAPPENING:
    our site was migrated to 2013 from 2010 from 2007 and is running in compatability mode around 6-18 months ago. I'm pretty sure the old system is gone too - database backups might be obtainable... not sure.
    There are a bunch of "site columns" that are used consistently across the collections libraries (there seems to be a general avoidance of "content types", don't ask me why, I don't know, I also don't know what would be involved in moving
    them all to content types as many of the sites "views and webparts" use the content type columns to surface things all over the place, so I suspect it would be a big job), but folks have recently noticed that some documents are missing from various
    pages (webparts that are gathering documents from these columns values).
    But the problem is that it seems that since the update most (all?) of the document libraries NO LONGER enforce the requirement and litterally only show "name*", and "title" in display and edit properties...
    Any ideas on how to get things back to showing the "proper" forms (I can only guess what this was from documentation and screenshots and general guessing based on the "commonness" of the columns in question)? Or is there a way to merge
    or migrate "columns" to content types in some way that is either "collection wide" or non-breaking?
    ANY assistance would be greatly appreciated!

    So just to be sure are you saying that '2010 compatabilty mode' is causing these issues?
    Just to be SUPER clear from my end this is what I'm seeing as an example;
    For a collection
    with site columns
    many but not all lists
    many but not all list items
    --> are missing valid data in the site columns that have been registered for that list.
    sample:
    name          modified by    doctype     department
    item1.docx   username   <blank>  <blank>
    item2.docx   username    WorkInstruction    Planning
    if you click "edit properties" you are presented with ONLY the (I'm guessing) content types fields (eg: for Document you get Name and Title) and NONE of the other fields that should be specified.
    However if you hit "save" you can see that the data in these fields returns to the "list view" (however it does not re-enable these fields from being active in the View/Edit properties pages).
    Is this something that can be fixed? Or are you saying that we need to backup the DB and restore to a FULL version (not in compatability mode) of SharePoint2013? Or are you saying we need to revert to our PRE update backup and do something?
    Its been many months since thsi upgrade was done and the system has changed a lot, so you can imagine we are reluctant to loose much of these changes...
    Bazinga!

  • How do I remove the duplicates that appeared after upgrading to iTunes Plus

    I upgraded some of my music to the itunes plus (better quality?) and chose to send the old files to the recycle bin. All went well. The new files were added in itunes and there were no duplicates. Later we synced an ipod touch and when asked if we wanted to transfer purchases from the itouch before syncing my son responded yes. This created duplicates of the songs. The problem is ..... How do I tell which is the upgraded song so I can delete the old version?

    There are various ways of doing it.
    If you go to View>>Options and ensure that "Kind" is checked, old tracks will usually say "Protected AAC..." whereas the iTunes Plus tracks as shown as "Purchased AAC".
    You can use this information in a smart play list to get all the tracks you don't want together for easy deletion.
    You can also Look at Get info>>Summary tab.
    Oldtracks will generally have 128 bit rate and an M4p file extension. iTunes Plus tracks have 256 bit rate and an M4a file extension.

  • Want to delete an account but user does not appear in User and Groups after upgrading to Mountain Lion

    OSX 10.8
    2.7 Ghz Intel Core i5

    User is provisioned as Individual, not as Group. We validated the Groups and Ensure "no apostrophe" is present. Any suggestions? Created the Ticket with Oracle Support too... but no luck :(
    Any help in regard is greatly Appreciated.

  • Duplicate ical entries after upgrade to icloud

    Hi,
    Have no idea why this has happened, but basically I have been syncing using itunes manually via a cable, got the email from Apple to upgrade, went through the process, now its all on icloud, but I have noticed I have dupliate ical entries.
    what is the best way to sort this out now?

    ok, I just used the app iCal Dupe Deletor and it found 500 dupes, went through and deleted them all
    BUT.... when iCal updated to icloud, it just brought them all back from what I can see and they are all there again
    whats the best fool-proof way of sorting this?
    pleeeease there, so close but yet so far.....

  • Site disappears after upgrading to 2.02

    Help! Just did software update to 2.02... opened iWeb and it asked me to choose a template for a blank site. I didn't and the program closed itself. I searched for a domain. file as I saw suggested in another topic and there is none. Help!

    Unless you made a backup copy of your domain file then it looks like you're out of luck. From bitter experience, I keep backups and update them regularly.
    Although there has been a lot of stuff posted in this forum about the importance of making backups of your domain file, unfortunately, it usually too late by the time people read about it.
    It would be a positive move on Apple's part if they would build some sort of warning into the iWeb application. Maybe you could suggest this to them via the iWeb/Provide iWeb feedback menu. I sure they are sick of hearing from me!

  • After upgrading acrobat 6.0 pro to  acrobat 6.0.1 Unable to open pdf file in IE

    I have down loaded acrobat 6.0.1 pro upgrade patch from adobe site.
    After upgrading pdf files are not opening in IE from our application.
    On top of 6.0.1 i have upgraded to 6.0.2->6.0.3->6.0.4
    On opening pdf files from IE it gives error "Document is damaged and it cannot be repaired"
    Thanks,
    Bhagya

    You should update all of the levels and retry. It may be a bug in 6.0.1. You have 5 more updates to go. That may not resolve the issue, in which case come back and indicate the problem. However, with what you are saying about Mozilla, it sounds like you need to update IE (I am not sure what you mean by 6 & 7, unless you are talking about different machines). Sometimes you have to do a fix on Acrobat after OFFICE is updated as I recall.
    I am only making suggestions about how to approach the problem. I have no clue what the problem is an can only suggest the steps I might take to resolve the issue. I forgot whether the plugin for IE is from Adobe or MS.

  • DW is auto generating duplicate site profiles

    Within the "manage sites" section of DW8, my site profiles
    are being automatically duplicated by the program. Whenever startup
    DW8, I may have as many as 4 duplicate site profiles for any given
    site. Anyone else run into this and/or know how to fix it?
    Screenshot:
    http://www2.csulb.edu/divisions/students2/Web_Resources/errors/dw8_duplicate_site_error.gi f

    Do you (or did you) have a prior version of DW installed, as
    described
    here?:
    Dealing with duplicate site definitions when upgrading to
    Dreamweaver
    8
    http://www.adobe.com/go/a354d1b1
    David Alcala
    Adobe Product Support

  • Duplicate photo's in Revel and Elements after upgrade to Elements 12

    I subscribed to Revel in Nov. 2013 and used my Windows Elemennts 11 app to upload all my photos.  I recently upgraded to Elements 12 and linked it to my Revel account.  This resulted in complete duplication of every image both in Revel and in my Elements 12 catalog.  I tried deleting the duplicates in Elements 12, but since there are thousands, it is not feasible.
    What are my options?  Do I delete the Revel photos after unlinking the Revel account from Elements?  Can I rebuild my Elements 12 catalog from the picture files, (I had the metadata written to each file).?  Is there any automated way to delete duplicates in my Elements 12 catalog?
    I would have thought Adobe would have thought through how this could occur and provided upgrade safeguards against duplication.
    Help!

    jfairbai,
    Kindly try the steps below to recover from this issue.
    In Elements, From Edit>Preferences>Adobe Revel, turn OFF “Automatically access all my catalog in Adobe Revel” if checked.
    Sign out from Revel inElements through the same Adobe Revel preferences dialog.
    Click on Sign in again.
    Select Signin as another user. This action deletes the downloaded smaller previews of media in catalog.
    Now you have two options:
    After step 4, sign in again with same user but choose to upload specific photos only while signin in. In this case all photos and video would not automatically be uploaded to Revel and you would need to mark the media manually for upload which are not there on Revel but are in Elements catalog. You need to be cautious of not choosing “All photos and videos” later as well as whenever you do so, the media would be duplicated again. Also here the media on Revel and Elements are not linked as both of them are different copies. So if you edit one, other is not updated.
    After steps 4, delete all media from Revel application and login again from Elements with the same user. This option takes more time as all upload happen again but this will ensure that the media in Elements and Revel are linked. So if any changes happen like editing or adding tags, captions, the changes are refelected in other as well.
    Elements also provide a way to remove duplicate photos through Find>by visual searches> Duplicate photos. This option present you with a dialog where you can see the duplicate photos grouped. However this option would take a lot of time as well as for each group, you would manually check the location of media by mouse hovering an ensuring that you are deleting the smaller sized preview and keeping the large sized original locally.

  • Duplicate Reports after upgrading to SCCM 2012 R2 CU1

    Single Primary Site with SCCM 2012 R2 CU1.
    Upgraded from SCCM 2012 SP1.
    Duplicate Reports after upgrading to SCCM 2012 R2 CU1
    SCCM 2012 R2 CU1
    SQL 2008 SP3 CU 14

    This is known to happen if you modified any of the default reports
    I've seen that happening even in my lab (and and customers) where I am sure that I did not modify them. Just delete them (they should be prefixed with "_").
    Torsten Meringer | http://www.mssccmfaq.de

  • Unable to use certain sites after upgrading to iOS 8.0.2

    After upgrading (unintentionally) to iOS 8.0.2 I can no longer use certain sites that I regularly used previous to the upgrade.  The bookmarked signon page comes up and is pre-populated with my userid and password.  However the ipad does not respond when I touch the "logon" button on the screen. The screen is not responsive...almost seems frozen. This upgrade is useless to me if I cannot use these sites. Anyone else having these issues?  Any solutions?

    I do not have any issue in using Lync 2013 on my iPhone 6plus. Our corporate IT has solved the problem; I am not aware what all changes they had to do in the Lync server.

Maybe you are looking for