CR61-3M A4-5000 APU driver help (MANTLE?)

HI,
i have bought new MSI CR61-3M(FreeDOS) but; i am very curious about WHY; catalyst driver;on site of AMD, on CD, on site of MSI are very different each others If i use driver the on site of AMD, is it will harm my computer?
And mantle tech of AMD on beta test for now. i waiting for it. because if the beta release getting okay, MSI will release new driver official.
If i setup beta driver on my A4-5000 Radeon HD 8330, is it will harm my computer or is it mantle will increase my performance?

Hi, Ronny:
You can use all of the W7 x64 drivers and software from the HP Probook 455 G1 on yours.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359417&spf_p...

Similar Messages

HP 255 G1 with A4-5000 APU, driver for Windows 7

Hi,
I have a HP 255 G1 with the new APU A4-5000.
I choose to downgrade it to Windows 7 Professional 64bit (i have this license).
When I'm downloading the drivers, there aren't all correct workibg.
For the Chipset and graphics I found it direct at AMD (Catalysst 13.12).
All others are now also working.
Only the Wireless network driver i couldn't find.
HP 255 G1, G2; HP 655; from Ralink-Webste, all this don't work.
Maybe this information is helpful:
PCI\VEN_168C&DEV_0036&REV_01
It's the first time, I have those problems with HP computers/notebooks, so I hope to get help fast!
Thank you,
Ronny

Hi, Ronny:
You can use all of the W7 x64 drivers and software from the HP Probook 455 G1 on yours.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359417&spf_p...

MacBook Air Canon Pixma ip 5000 printer driver

I have a MacBook Air and I cannot find a printer driver for the Canon Pixma ip 5000 printer driver. Please...Please help me.

Get it from Canon or see if it is listed here:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

Disk utility tells me to start my computer with my osx disk, then repair the hard drive , help???

disk utility tells me to start my computer with my osx disk, then repair the hard drive , help???

Hi prkrgrp,
I'm sorry, I'm a bit unclear on the exact nature of your question. If you are having issues starting up from your original Install Disk and running Disk Utility to repair your hard drive, you may find the information and steps outlined in the following articles helpful:
Using Disk Utility to verify or repair disks - Apple Support
Resolve startup issues and perform disk maintenance with Disk Utility and fsck - Apple Support
Regards,
- Brenden

GX60 Destroyer Graphics Driver Help

I hope someone can help me soon. I bought the GX60 Destroyer and I love it, but I have one small problem. I can't update the graphics drivers. For games that can use the Mantle renderer, I need Catalyst version 14.2 or later, now when I install a new version of Catalyst, the R9 M290X card, is renamed as 8970M. I thought its not a problem, coz they very similar cards, but when I try to run games with the Mantle renderer, they crash with an error message saying something about the GPU not being available. I've looked everywhere and nobody seems to have this problem. I did flash my VBIOS and everything, and it didn't fix it. Please help.

Thanks, I kinda thought it would still be early for that kinda thing, seeing as there are only about 11 games that actually support Mantle right now. I'll just wait till a newer driver for my device is released. I'll be using the newer catalyst drivers because I find that even though they change the name of the card in the device manager, I get better compatibility with my games and the switchable graphics.

Windows 7 x64 on G6230 driver help(camdriver)

we just installed x64 windows seven on our lenovo g230 but we're having problems installing the camera drivers and energy management...we used the vista cd driver that came along with the unit(all the drivers work well except those two)
need help in here T_T..i also downloaded vista drivers on Lenovo but still doesnt work..hope someone help me in this..

we have the same problem but worsst... graphics drivers not complete, printer driver and bluetooth having problems.............. pleassssssssssssse neeeeeeeeeddddddddddddd help

Failed Hard Drive Now Windows 7 Home Premium Fails Validation on New Drive -- HELP

How do I validate Windows 7 HP OEM version when I had to move everything to a new hard drive? Thanks in advance.
This question was solved.
View Solution.

I don't see any mention of your trying the guide that was in my previous post, so here it is again
http://grok.lsu.edu/article.aspx?articleid=16651
Since you say it is Windows 7 HP OEM version, I am assuming the laptop came with Windows 7 Home Premium
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

External Hard drive help: use with mac and pc? how to backup everything etc

Hello! I need some help regarding a new external hard drive I got from OWC. It is a 500 gb firewire 400 + usb 2.0 7200 rpm hard drive. I am running it from firewire. The software suggests the first thing you do is make a clone of your macbooks internal hard drive, that way if it fails later you can use the external to back everything up. If I do this ...
1. do I have to make the drive "Bootable" ? I have software called Data Backup 3 by Pro soft I think. It came with my external.
2. Can I still back up other stuff like my audio recordings and record onto that drive to a seperate folder?
3. If I make a bootable copy will it try and boot from the drive everytime I turn it on or something?
My other question is... how can I use this drive with a pc? I have a pc as well and I heard that the only way it will work is to format it in ms-dos mode (fat32?)
If I write it to fat32 will it slow down my drive or make it worse? I heard that you should format external drives specifically for mac if you have a mac; so it will only work with macs...
(sorry this is going on and on; it's like a chain reaction of questions)
so If its formatted to mac drive format then can I do this with my current situation:
1. I have wireless internet, the router is on a pc downstairs
2. Can I send files over a network somehow from the pc to my mac
3. then store it on my external?
If so can someone point me in that direction with a link?
Thank you for reading, sorry for making this so long.

1. No, you don't have to make a bootable clone.
2. If you use the drive for a bootable backup, then you cannot use the drive for other types of storage unless you partition the drive and make more than one volume.
3. No, it will not try to boot the computer. You must designate the startup volume using Startup Disk preferences.
If you wish to use the drive on both a Mac and a PC, then either you make two partitions - one for Mac and the other for the PC or you must format the entire drive using FAT32 so the drive can be used for read//write by both operating systems. If you do this then you cannot use the drive for a bootable backup nor can you use it with Time Machine.
FAT32 is slower for read/write on the Mac than using Mac formatting.
Optimally, I would suggest you partition the drive into two volumes. One volume formatted for the Mac and the other formatted FAT32.
You can send files from a PC to a Mac and vice-versa using File Sharing. Select Mac Help from the Finder's Help menu and search for "file sharing" or "sharing" to find help articles. Also see,
Mac OS X 10.5 Help- Setting up a Mac computer to share files with Windows users
Mac OS X 10.5 Help- Setting up a Windows computer to share files with Mac users
Mac OS X 10.5 Help- Sharing with Windows computers

Weird problem involving my external hard drive - help please!

I recently got a formac mini 120 gb firewire hard drive, which had been working fine with my g4 quicksliver.
i then went to a friends (g5 machine) with my drive and he put some data on it - bought it back to mine and managed to re connect the drive and take the data - no problem - very happy.
I recently gave my drive to another friend using a g5 and when it came back, nothing - i don't get the drive symbol appearing. turned the comp on and off many times and tried re-connecting etc still no drive appearing.
Then i took the drive to my friend with a mac lap top power book. connected there - working fine. Baffling. was happy that my data can still be accessed.
I know it's not the firewire cable because i can get power to the drive - i can see the red light at the fron on.
Can anyone help with this weird problem?
Thanks

Thought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours might be the 10.4.10 Combo update. I have no idea since you did not fill out your specs. fully when you signed in to this site. Others reading, download the Combo that applies to your system. This link is for PPC Macs not Intel Macs.
If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good! Also, here is Apple doc.#88338 on getting FireWire to work.
Good Luck!
Cheers!
DALE

Changing dvd drive help

I have a presario S7150 and want to change dvd/cd rom drive. New drive is S ATA old one is IDE, cant find where to plug the SATA cable into .
Do I need an adapter or is there a place to plug in on the motherboard and if so where.

That motherboard does not have SATA ports: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00100539&tmp_task=prodinfoCategory&lc=en&dlc=en...
There are choices, however.
1) Install a PCI adapter card:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1281807&CatId=1455
2) Get a different DVD drive. They still have IDE drives available:
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007589%20600003705&IsNodeId=1&name=ID...
3) Get an enclosure for the drive that was purchased to make it USB:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817145068
4) replace motherboard with newer device interfaces (not recommended for you hardware)
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Unable to mount external fire-wire hard drive - help, please!

After working the last couple of days to resolve the failure of an internal drive, now one of my external drives (LaCie fire-wire) will not mount. I was using it to back up the bad internal drive, and probably forgot to eject the drive before turning it off; don't know if this really makes any difference, but just in case...
If I use Disk Utility I can see the LaCie drive, but it will not mount.
When I tried to verify the drive got the following message -
Invalid sibling link
The volume LaCie HD needs to be repaired
1 HFS volume checked - volume needs repair
Next I tried to repair the drive, and was told -
Invalid sibling link
Volume check failed
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
This is where I stopped. I read another post somewhere in the forums about making a disk image of the drive, but I'm afraid of making things worse by proceeding without knowing what I'm doing. Any ideas on how I can somehow retrieve the data in the LaCie drive?
Once again, thanks in advance for any help!

Hi! Diskwarrior is always better at repairing drive directories which constitute 99% of all drive problems. I run it fairly regularly usually once a month. BUT I always run it at the first sign of weirdness or problems AND every time I have had a power failure or a forced restart or shutdown because those events usually always damage the drive's directory. Often even though the directory is damaged OSX can go ahead and mount it and it will work ok but eventually the damage builds every time one of those events occur and finally there is a failure to mount or boot. Tom

I purchased an unclaimed luggage at the airport that had a mid 2010 13" MB-Pro -- It comes up to a boot screen with snow leopard or Windows -- I tried to boot from Optical with Lion install -- it woon't won't boot from the optical drive, help

It won't go to taget disk mode -- I took the drive out and used disk utility to re-partition and format - now I get the folder with a question mark and it still won't boot from optical or usb or go to target disk mode -- I haven't tried installing lion on the disk while it is out and then putting it back in the machine --
according to the serial number, it is still under apple care but since I don't know the person that used to own it I can't get it transferred to me -- or will apple do that since I bought it in an auction?

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

Saving and reopening an iDVD project from a hard drive - HELP!

Hello! I am a moderately experienced user of iLife and am starting to use it for a business(memorial videos, sports highlight videos, etc) My problem is this: After I finish a project and export it to iDVD I want to save it to my external hard drive and store it there(like a file cabinet for all my finished projects, so that I can come back to them later, if needed) and I am having difficulty when I do this and then go back to open it - iDVD can't find my files for the pictures and sometimes the audio and video. This said, this is my process: Create project in iMovie, export to Garage Band to create chapters, export to iDVD.(this is 08 BTW) At every step I save to the desktop. Then when I am finished burning my DVD, I create a folder(eg., Bob and Kate's Wedding) on my hard drive and put all the media from the desktop in that folder(eg, the iMovie file, the Garage Band file, the iDVD file and a folder of the pictures I used also.
If anyone can shed some light on a better process, or maybe a reason why I cannot just go into my hard drive and double click the iDVD project and burn extra copies, that would be fantastic!
I appreciate any insight. I love doing this work, but with 3 kids, I rarely get time to research the answers to my questions outside of this board!!!
TIA - Lis

Hi Mamalisa
iDVD can't find my files for the pictures and sometimes the audio and video.
And welcome to apple discussions. If you plan to do further modifications to your iDvd project then follow these steps. (btw, iDvd doesn't like it when you change the actual location of video / audio assets once encoded / burned to DVD-R unless it's saved or rather archived beforehand).
On the other hand if you plan no further changes then you may wish to follow this instead of the above.
By sdmacuser at 2009-09-03
Hope this helps but if not just come on back.

Mac OSX is telling me to reformat my external hard drive - HELP!

I have Fantom Drives external hard drive which I use to backup my Mac (via Time Machine) as well as for general storage. Recently, when I turned on my external hard drive I was given the following message:
"The disk "Time Machine Backups" was not repairable by this computer. It is being made available to you with limited functionality. You must back up your data and reformat the disk as soon as possible."
Basically, I can use anything on the external hard drive as well as copy files FROM the drive, but I cannot add anything new to it. I went to Disk Utility to try and repair the disk, but the button is not available so I clicked Verify Disk. The results in red were the following:
"Incorrect number of thread records
Invalid sibling link
Volume Check failed
Error: Filesystem verify or repair failed"
I wondered if erasing the external hard drive would possibly fix the situation. Is it even worth it to try? I was able to copy the most important files to my iPod, but I don't have nearly enough room to copy everything I need (otherwise I would just do it).
My other option is to by a new hard drive and move everything over, but I am hoping I don't have to do that.
Does anyone have any other ideas?

if the drive can not be repaired you should try reformatting.
you can try the following link first that sometimes helps with invalid sibling link errors
http://www.macosxhints.com/article.php?story=20070204093925888
also, try unmounting (not ejecting) the drive and see if you can use "repair disk" then.
Message was edited by: V.K.

ITunes can't find music on external hard drive Help!

We moved my friend's iTunes music to an external hard drive. Everything was working fine until this week. Somehow the location of the music got changed back to her C drive. I redid the location but now every song has the exclamation mark. I would trash the music folder on the external drive and have her import the songs again from her DVD back ups but she has over 4,000 songs. Any other way to do this? I'm a Mac person so please explain the PC steps clearly. She is running Windows Vista.
Thanks for any help you can offer.

Somehow the location of the music got changed back to her C drive.
Because iTunes was started with the external drive not plugged in or not online and ready.
I redid the location but now every song has the exclamation mark
Select all the songs in iTunes, right click - Get info.

CR61-3M A4-5000 APU driver help (MANTLE?)

Similar Messages

Maybe you are looking for