Create a dashboard like a page on Discoverer Desktop / Plus?

Hi,
Is it possible to create a dashboard like a page on Discoverer Desktop / Plus / Viewer. A page (or workbook sheet) with 4 – 6 graphs and one table?
e.g. below layout (G is my graph and T is table)
G1 | G2
G3 | G4
G5 | T1
Thanks

Hi
This is not possible in Discoverer Plus, Viewer or Desktop. However, using Portal you can do this by having six different, or releated, Discoverer graphs displayed side by side. You just create six different portlets. Simple as that.
Best wishes
Michael

Similar Messages

  • Can I schedule a discoverer In Oracle Discoverer Desktop, Plus, Viewer ?

    Hi All,
    I have a version of Oracle Administrator : 10.1.2.48.18. My customer tells me if he will be able to schedule a report in the Oracle Discoverer, and then this schedule send an email with the information that shows the report.
    Thanks in advance,
    Mariano.-

    Hi,
    You cannot schedule and email using Discoverer scheduling. You have to use a third party scheduler and Discoverer Desktop. This article (http://ascbi.com/downloads/Third%20Party%20Documents/Scheduling%20through%20Concurrent%20Manager.pdf) may give you some ideas on how you can use third party scheduling with apps. A bit of extra development will also give you emailing of the scheduled output.
    Rod West

  • Nesting region to create a dashboard type of page

    Hello experts,
    I am trying all day to create a page nest that will create the illusion of a dashboard type page. Can any one show me how to do this?
    Thank you in advance for your help

    Denes,
    Would you go over liek a mini class on how to set up regions in apex as you were able to demo in your work. I am strugling to set up a dashboard type column
    eg
    ============= ============= ============ ===========
    = = = = = = = =
    = = = = = = = =
    = = = = = = = =
    ============= ============= ============ ===========
    it can be two rows like this as well
    ============= ============= ============ ===========
    = = = = = = = =
    = = = = = = = =
    = = = = = = = =
    ============= ============= ============ ===========
    ============= ============= ============ ===========
    = = = = = = = =
    = = = = = = = =
    = = = = = = = =
    ============= ============= ============ ===========
    How can I make graph chart, map etc...line up on this regions?

  • How To Create An Excel like Web Page?

    Hi All,
    Apex 4.1
    I have created n interactive report which was converted from a spreadsheet. This is a very long report of 100 columns display. So the user got tired in scrolling it left to right and vice versa.
    How can I make it behave like excell spreadsheet in which the selected first 3 primary-key columns will be displayed fixed on the left most region and the succeeding columns will be displayed by batch of 10 columns.
    which will just fit on 1 page and no need to scroll too long to the right most part. Maybe there is a button "next>" or "<previous" to scroll from left to right and vice versa?
    Can you give me links to sample demo apps that demonstrate this kind of usage?
    Thanks a lot,

    KinsaKaUy? wrote:
    Yes, thats exactly what I wanted....but why not free :(If you want it free, then create a Classic Report instead and use this solution by Jari
    http://dbswh.webhop.net/dbswh/f?p=BLOG:READ:0::::ARTICLE:59900346164562
    http://dbswh.webhop.net/dbswh/f?p=BLOG:READ:0::::ARTICLE:303800346302715
    I got an Idea... Say I will divide the 100-column report into 10-column report and each has the 3 primary key columns on the right attached. so I will have 10 individual pages but sharing same Tab?
    How do I create a button "Next>" and "<Previous" so that the page will be displayed sequentially?You need to maintain the current page in session state and on "Next>" and "<Previous" action increment and decrement the value

  • HELP !!! Discoverer Desktop/Plus Slowness

    We have a view build on wip_discrete_jobs_v and hr_all_organization_units in APPS. When the view runs it returns at a very good speed. Then we build a disco report, the first time we open the report, it took 10 seconds yesterday. However, when we try to open the same report today from Desktop or Plus, it will takes *15-20 min* to get any result.
    I'm not sure where the issue is: Could it be a bug in Disco? Or this is version issue? Or is there anything missing Administrator?
    It seems the view itself is good in SQL.
    Please advise.
    OracleBI Discoverer Administrator - Version 10.1.2.00.00
    Discoverer Administrator Client 10.1.2.45.46c
    OracleBI Discoverer 10g (9.0.4.00.00)
    Oracle Business Intelligence Discoverer Plus 10g (10.1.2.48.18)
    Discoverer Model - 10.1.2.48.18
    Discoverer Server - 10.1.2.48.18
    End User Layer - 5.1.1.0.0.0
    End User Layer Library - 10.1.2.48.18

    Hi,
    The Apps views such as wip_discrete_jobs_v are not really designed for reporting. This view contains calls to security packages and calls to project packages to fetch details project details. The time taken to process a call to these packages is very dependent on your Apps environment, for example, what responsibility you are using and the organisation for that responsibility. Also the number of calls made to these packages can change greatly depending on how the SQL is processed.
    Discoverer uses a lot of in-line views and these views can be materialized within the query so that all the information in the view is stored in temporary space. There are also some large tables being queried here, therefore the execution plan can change dramatically depending on the database statistics stored for these tables. So for example, you can find that the query is run from Discoverer, Oracle decides to full scan the tables and materialized a view in the query forcing all the package calls to be made for every row in the table, hence the query takes ages to run.
    On the other hand if the SQL is just run from SQL*Plus then a flattened version of the SQL is run without the in-line views and so there are many less calls to the packages, and these calls are quicker because the session hasn't been initialised with a responsibility.
    So to summarise, I wouldn't recommend using these Apps views in reporting, it is better to write your own to do exactly what you want and achieve a better, more consistent response time. Secondly, you have no idea what is happening here unless you monitor the SQL being processed in the database, either by monitoring the V$SESSION and V$SQL_TEXT views or by tracing the session so that you can see the actual SQL and all the associated recursive SQL being run by the packages. Only when you understand how Oracle is processing your query will you will able to take action that will reliably improve performance.
    Rod West

  • How to use Oracle OAB Fast Formulas in Discoverer-desktop [ for reporting]

    Hi,
    Can anyone tell me how to use a fast formula in discoverer-desktop [for reporting]. Currently, we have a disco-report that calcuates the 'monthly salary', but we don't want to use that. Instead, we have a custom fast-formula [xx_oab_monthly_salary] which has the conditions and calculations that we need.
    I want to use that formula in discoverer-desktop directly and get the monthly-salary.. i.e., someone needs to create a folder under the business area and add it i believe.. the formula internally calls a function.
    when i checked about this with my dba - he said, he can add the 'function', but not the formula. and i need to write the calculation part...
    does anyone know how to add it...there shud a way right...
    i do not have access to the technical-stuff here..
    someone said ["you can wrap the FF_EXEC.run_formula call into your own pl/sql function and map this function into the EUL so that the formula can be called from a workbook.", but this talks about pl/sql-do we need pl/sql
    for this].
    also, someone else said [ some fast formulas need specific contexts to be set. Depending on whether the fast formula below the only fast formula that you want to recreate in Discoverer.
    For a single formula, in general my recommendation is to recreate the fast formula instead of using the ff_exec call].
    any quick answers greatly appreciate..
    thx,

    Hi,
    That's right you need to develop the pl/sql function outside of Discoverer using a pl/sql tool or just SQL*plus. I haven't an example to hand, but can dig one up if you need it. Once you have the function developed you can map it into the EUL using Discoverer Administrator. It will then be available to Discoverer Desktop/Plus as a database function when creating calculations. So you can then just add the calculation to an existing or new report.
    Alternatively, you can build the pl/sql function into a view and load the view into a new folder using Discoverer Admin.
    Rod West

  • How to create folder on dashboard like paint repository "standard reports"

    Hi all,
    I want to create a folder (hyperlink) on dashboard like paint repository "standard reports". Please Refer me any link.
    Any response would be hightly appriciated.
    Regards
    null

    I logged as Administrator.
    Go to Answers --> Click on Manage Catalog --> Click on Shared Folders link on top --> Create folders, sub-folders.... After you are done, click on the Properties of that folder and note the path.
    In Answers save your reports to those folders...
    In Dashboard
    Edit the Dashboard --> add Folder and in the Folder Properties provide the path.
    You are done.
    -- asit

  • Create a dashboard with moving display like stocks prices

    hi all!
    I was thinking if we can create a dashboard/ report with moving displays like stock prices, just like in TV we see the data moving showing the prices.
    I highly appreciate for any reply.
    Thanks,
    Ravi

    Hi,
    where is my points... Mark helpful or correct for answers... so the user know whats right and i will get points...
    Regards
    Naresh
    Edited by: Naresh Meda on Dec 30, 2008 10:50 PM

  • Hi i recently created a document on iwork pages via my icloud account however when i click on the document now it doesnt seem like it saved the latest version? can anyone help with this?

    Hi i recently created a document on iwork pages via my icloud account however when i click on the document now it doesnt seem like it saved the latest version? can anyone help with this?

    Welcome to the Apple Community.
    Are you also trying to re-open it on the same device as you edited it.

  • How to Get My Dashboard as Default Page Instead of Home Page in OBIEE 11G?

    Hello Gurus,
    I have one requirement where i need to change default page to "My Dashboard" like what we had in OBIEE 10G ?
    Rite-now in OBIEE 11G when any user logs in they are directed to "Home" Page, but i want to change the navigation to "My Dashboard" for all user..
    I know the option to in My Account and Change the Default dashboard in Preferences , but it's manual way to do it for all end-users.
    and the other is to create the PORTALPATH Variable and do it from RPD.
    So I am looking to some other way there we can change the navigation path from system file itself...
    Thanking You..

    Hello David,
    Thanks for reply.
    Actually I am just concern abt the OBIEE Dashboard page, the link that u have mentioned is for Application Server, where we can manage the multiple Application Portals.
    and it also doesn't come with Middleware that we are installing for OBIEE.
    so i did get some useful information but not related to my question.
    is there any place in EM(Enterprise Manager) or Console(Admin Console) from where we can manage the Default Portal for OBIEE Users?
    Thanking You..

  • Can we create two dashboard prompts for the same column in the samepage

    hi ,
    can we create two dashboard prompts for the same column on the same page,
    I have a date column and I am trying to create 2 dashboard prompts on the same page one as from date and the other one as to date.Is this possible to create.When I am trying to create it is giving me error like cannot use same column for creating the prompt
    Any suggestions or ideas

    863997 wrote:
    hi ,
    can we create two dashboard prompts for the same column on the same page,
    I have a date column and I am trying to create 2 dashboard prompts on the same page one as from date and the other one as to date.Is this possible to create.When I am trying to create it is giving me error like cannot use same column for creating the prompt
    Any suggestions or ideasYou are correct. You cannot build two prompts on the same column. Use this link for instructions on how to build a "between prompt" because of this fact:
    http://oraclebizint.wordpress.com/2008/02/26/oracle-bi-ee-101332-between-prompts-for-date-columns-using-presentation-variables/

  • How to create a Dashboard Tab

    Hi Experts,
    I want to create a DASHBORAD tab ( " Subscriber" ) like " MY Dashboard" is in the mainpage of the Presentaion tab. 2 reports should be under the tab "Subscriber". Please guide how to do this? I am not getting where to do this in Administration settings.
    Regards
    Jan

    Go to
    1. Settings / Administration / Manage Interactive Dashboards
    Here you create the dashboard
    2. In Answers / Manage Catalog
    you create the folder
    3. on the dashboard / page options / edit dashboard / dashboard properties
    you organise the user rights
    Turalf

  • Creating New Dashboard Packages for SAP Business One

    Hi Experts,
         I am learning how to create my dashboard for Business One on version 9.1PL04.
         In this step.
    http://businessone91:8080/B1iXcellerator/exec/ipo/vP.001sap0004.in_HCSX/com.sap.b1i.vplatform.runtime/INB_HT_CALL_SYNC_X…
            The URL can't returns an XML data sucessfully.So, i try to through IE browser to access this URL.
    SAP B1iP detected an error:
    Emitted HTTP-Code:
    500 - Internal Server Error
    Internal Reason:
    Server side cannot respond your request (No scenario step (vBIU) assigned for step for sender system (SysId) [0009] [incoming identifier = 'io'])
    Recommendation:
    Check for the correctness of your activity or environment or ask your system-administrator for further help.
    tid
    TID: 15031009242239306682A9FEA29322F6
    Full Internal Error Message:
    com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception:
    com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.utilities.UtilException: UTE001 Nested exception: com.sap.engine.lib.xml.util.NestedException: Server side cannot respond your request (No scenario step (vBIU) assigned for step for sender system (SysId) [0009] [incoming identifier = 'io'])
    Log-ID:
    LID15031009242239306858A9FEA2931BD0
        How can i slove this problem?Thanks for your help.

    Hi David,
    I also seek help for the dashboards, no doubt its matter of practise but like we are facing the problems where we have to map our query structure with Excel sheet.
    like I'm facing a problem where my Query accepts two parameters in SAP B1.
    In Xcelsius I mapped almost everything and these two parameters are accumulated by 2 combo's but when I make a XML data connection and use trigger cell option , it just takes one combo into consideration.
    Expected result is : If I change the value in any of the combo then it shud reflect results accrodingly
    Actual result : if I change the value of 2nd combo it doesn't reflect the changes until I select the value from first combo again.
    Any inputs will be really very much appreciated.
    Regards

  • How to create a report with different page sizes

    Hi,
    I would like to create a report with different page sizes, it's possible to do it with diadem?
    When I change the layout parameters, changes afect to all sheets...
    Is there a way to change page size individually for each sheet?
    Thanks in advance.
    Marc

    Hi Marc,
    You can use the DocStart and DocEnd commands along with the PicPrint command to spool multiple print commands to the same output PDF file using the direct printer approach.  This should enable you to programmatically specify the page size differently for each sheet that you add to the print job.
    ' Print PDF Page by Page.VBS
    OPTION EXPLICIT
    Dim i, Path, OldPrintName
    Path = AutoActPath & "2D Stacked"
    Call DataDelAll
    Call DataFileLoad(Path & ".TDM")
    PDFFileName = Path & " Page by Page.pdf"
    IF FileExist(PDFFileName) THEN Call FileDelete(PDFFileName)
    OldPrintName = PrintName
    PrintName = "winspool,DIAdem PDF Export,LPT1:" ' Set to PDF printer
    PDFResolution = "72 DPI" ' "2400 DPI" , "default"
    PDFOptimization = TRUE
    PDFFontsEmbedded = FALSE
    PDFJPGCompressed = "high"
    PrintOrient = "landscape" ' orient paper
    Call PrintMaxScale("GRAPH") ' auto-max, see alternative margin setting variables below
    PrintLeftMarg = 0.181
    PrintTopMarg = 0.181
    PrintWidth = 10.67
    'PrintHeigth = 7 (read-only)
    Call WndShow("REPORT")
    Call DocStart ' Begin multi-page document/print job
    FOR i = 1 TO 4
    Call PicLoad(Path & ".TDR")
    Call GraphSheetNGet(1)
    Call GraphSheetRename(GraphSheetName, "Page " & i)
    Call PicUpdate
    Call PicPrint("WinPrint") ' Add a page to be printed
    NEXT ' i
    Call DocEnd ' End multi-page document/print job
    PrintName = OldPrintName
    Call ExtProgram(PDFFileName)
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Can I create a fillable form in Pages and then PDF to iWeb?

    I'm a teacher and I'd like to be able to upload some PDF documents for my students to download, but would LOVE it if I could make sections of the document available for them to fill out answers, so they could, in turn, save as PDF and send back to me!
    Is this possible?
    I know how to get the documents into iWeb and that is working fantastic.
    But I don't know how to create an area on a page that students can write in. Do I have to maybe do the whole thing in PDF Writer (never used it but have heard that it might have that capability).
    THANK YOU!
    --MacMeg in Neverland

    treivisone wrote:
    But my problem is that i want to export my Pages' page directly to iweb to put it as a podcast. I'm working for an association that wishes to make all the content on itunes...
    Ummm.... I know a lot about podcasting, but to my knowledge there is not a way to "embed" a document in a podcast episode. The XML specifications do not do that. However, in the content of an "enhanced" podcast, you can link to a document which can be downloaded while "viewing" the podcast. For an example of that, see my podcast episode:
    http://spot.pcc.edu/~dleighto/podcasts/psy201a/episode20080117133153-0800.m4b
    If you go to about 29:30 in the podcast, and have opened the artwork/video viewer, you will see a link at the bottom of the viewer pane to download the file. That file, however, is stored separately from the podcast episode. In iWeb, you would set that file up on a downloads page. Then in the podcast episode, you specify the path to access the file. When the user clicks on the link in the viewer, it downloads the file.
    Is that what you want to do?

Maybe you are looking for