Create a DDic sturcture via ABAP program

Hello,
is it possible to create a DDic structure via a ABAP program? I've got the components and component type of the new structure in a table.
I want to create a DDic structure with this information. Is there function module or a method, with this functionality?
Thanks for help!
Matthias

I need a DDic structure to use this in the exporting parameters of an remote-enabled function module. Thier isn't it posible to use an none typed parameter, because of the remote.
I want to create an admin-screen for an tool calls DocFinder. For this tool you need for every DocuSpace an extra structure to return the values.
We use this tool in an shared systemlandscape so its nessessary to use an remode-enabled function module.
In the admin-screen it should be able to create an new DocuSpace with its structures and other generatet coding.
But I've got no idea how to create an structure via programm.

Similar Messages

Send a mail via ABAP program

Hello Experts,
I want to send mail via ABAP program with the following requirements :
1. Recipient is OUTLOOK email -id
2. Sender address has to be an external email-id
3. Send mail as CC and BCC also to other email-id.
Is there any function module which can satisfy all the above requirements.
Regards,
Mansi.

hi,
this code will definately help you just go through it:
firstly exported the data to memory using the FM LIST_FROM_MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = t_listobject
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE e000(su) WITH text-001.
ENDIF.
then i converted it into ASCII using LIST_TO_ASCI,
CALL FUNCTION 'LIST_TO_ASCI'
TABLES
listasci = t_xlstab
listobject = t_listobject
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
IF sy-subrc NE 0.
MESSAGE e003(yuksdbfzs).
ENDIF.
This gives the data in ASCII format separated by '|' and the header has '-', dashes. If you use this internal table directly without any proccesing in SO_NEW_DOCUMENT_ATT_SEND_API1, then you will not get a good excel sheet attachment. To overcome this limitation, i used cl_abap_char_utilities=>newline and cl_abap_char_utilities=>horizontal_tab to add horizontal and vertical tabs to the internal table, replacing all occurences of '|' with
cl_abap_char_utilities=>horizontal_tab.
Set the doc_type as 'XLS', create the body and header using the packing_list and pass the data to be downloaded to SO_NEW_DOCUMENT_ATT_SEND_API1 as contents_bin.
This will create an excel attachment.
Sample code for formatting the data for the attachment in excel format.
u2022     Format the data for excel file download
LOOP AT t_xlstab INTO wa_xlstab .
DESCRIBE TABLE t_xlstab LINES lw_cnt.
CLEAR lw_sytabix.
lw_sytabix = sy-tabix.
u2022     If not new line then replace '|' by tabs
IF NOT wa_xlstab EQ cl_abap_char_utilities=>newline.
REPLACE ALL OCCURRENCES OF '|' IN wa_xlstab
WITH cl_abap_char_utilities=>horizontal_tab.
MODIFY t_xlstab FROM wa_xlstab .
CLEAR wa_xlstab.
wa_xlstab = cl_abap_char_utilities=>newline.
IF lw_cnt NE 0 .
lw_sytabix = lw_sytabix + 1.
u2022     Insert new line for the excel data
INSERT wa_xlstab INTO t_xlstab INDEX lw_sytabix.
lw_cnt = lw_cnt - 1.
ENDIF.
CLEAR wa_xlstab.
ENDIF.
ENDLOOP.
Sample code for creating attachment and sending mail:
FORM send_mail .
u2022     Define the attachment format
lw_doc_type = 'XLS'.
u2022     Create the document which is to be sent
lwa_doc_chng-obj_name = 'List'.
lwa_doc_chng-obj_descr = w_subject. "Subject
lwa_doc_chng-obj_langu = sy-langu.
u2022     Fill the document data and get size of message
LOOP AT t_message.
lt_objtxt = t_message-line.
APPEND lt_objtxt.
ENDLOOP.
DESCRIBE TABLE lt_objtxt LINES lw_tab_lines.
IF lw_tab_lines GT 0.
READ TABLE lt_objtxt INDEX lw_tab_lines.
lwa_doc_chng-doc_size = ( lw_tab_lines - 1 ) * 255 + STRLEN( lt_objtxt ).
lwa_doc_chng-obj_langu = sy-langu.
lwa_doc_chng-sensitivty = 'F'.
ELSE.
lwa_doc_chng-doc_size = 0.
ENDIF.
u2022     Fill Packing List For the body of e-mail
lt_packing_list-head_start = 1.
lt_packing_list-head_num = 0.
lt_packing_list-body_start = 1.
lt_packing_list-body_num = lw_tab_lines.
lt_packing_list-doc_type = 'RAW'.
APPEND lt_packing_list.
u2022     Create the attachment (the list itself)
DESCRIBE TABLE t_xlstab LINES lw_tab_lines.
u2022     Fill the fields of the packing_list for creating the attachment:
lt_packing_list-transf_bin = 'X'.
lt_packing_list-head_start = 1.
lt_packing_list-head_num = 0.
lt_packing_list-body_start = 1.
lt_packing_list-body_num = lw_tab_lines.
lt_packing_list-doc_type = lw_doc_type.
lt_packing_list-obj_name = 'Attach'.
lt_packing_list-obj_descr = w_docdesc.
lt_packing_list-doc_size = lw_tab_lines * 255.
APPEND lt_packing_list.
u2022     Fill the mail recipient list
lt_reclist-rec_type = 'U'.
LOOP AT t_recipient_list.
lt_reclist-receiver = t_recipient_list-address.
APPEND lt_reclist.
ENDLOOP.
u2022     Finally send E-Mail
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = lwa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
IMPORTING
sent_to_all = lw_sent_to_all
TABLES
packing_list = lt_packing_list
object_header = lt_objhead
contents_bin = t_xlstab
contents_txt = lt_objtxt
receivers = lt_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Hope it will help you
regards
Rahul sharma

How to create Inbound Idocs in a ABAP program? Any function Module?

Hello Experts,
My requirement is : I have sales order data which I extracted from third party system in my internal tables. In the same box I need to create inbound Idocs and then consequently create sales orders.
I have used the function module IDOC_INBOUND_WRITE_TO_DB to create inbound Idocs from Sales Orders data in internal tables. I have populated all the data records with correct PSGNUM and HLEVEL values. My plan is to create inbound idocs with this function module and send those to IDOC_INPUT_ORDERS function module which creates Sales Orders.
If a sales order in the internal table in ABAP program contains only one item, then I am getting correct idocs. But if more than one item exists for a sales order then the line item segments which got repeated in Idoc are having PSGNUM and HLEVEL values as zero when I checked in WE02. As a result the hierarchy from the second item segment is getting disturbed and getting the status 60.
I populated T_EDIDD with data records from IDOC_INBOUND_WRITE_TO_DB.
To the function module IDOC_INPUT_ORDERS, T_EDIDC and T_EDIDD are the input. I observed that in T_EDIDD also the PSGNUM and HLEVEL values are blank.
I am getting Status 60 with message 'EDI: Syntax error in IDoc (segment cannot be identified)' for idocs which have more than one item.
I need to extract sales data from third party and create inbound idocs and create sales orders in one ABAP program only. I need to display corresponding Idoc numbers for the corresponding third party sales order number in a listoutput.
Can anybody please provide inputs?
Regards.

Hi Anjali,
Thanks for the response.
I have passed the PSGNUM and HLEVEL values while populating the data records. Then I sent the data records and control record information to the function module IDOC_INBOUND_WRITE_TO_DB. Inside this function module there is code to clear the PSGNUM values and HLEVEL values.
for compatibility: clear administration data of data records
           perform data_records_wipe
                                  tables
                                      t_data_records.
FORM DATA_RECORDS_WIPE
                  TABLES
                      T_DATA_RECORDS_IN STRUCTURE EDIDD.
LOOP AT T_DATA_RECORDS_IN.
    CLEAR: T_DATA_RECORDS_IN-MANDT,
           T_DATA_RECORDS_IN-DOCNUM,
           T_DATA_RECORDS_IN-SEGNUM,
           T_DATA_RECORDS_IN-PSGNUM,
           T_DATA_RECORDS_IN-HLEVEL.
    modify t_data_records_in.
ENDLOOP.
ENDFORM.                               " DATA_RECORDS_WIPE
This is the code which is clearing all the PSGNUM and HLEVEL values. After coming out of this function module we are getting the error idocs created with disturbed hierarchy.
I need to create INBOUND Idocs with the data in ABAP program.
Please let me know if any inputs? Is there any function module existing to create Inbound Idocs inside an ABAP program?
Regards

How to extract data from BPC InfoCube via ABAP program?

Hi experts!!
I tried to extract data from a BPC InfoCube via ABAP program, but I did'n have succeed.
I used the function 'RSDRI_INFOPROV_READ' to extract data from standard InfoCubes such as '0COPC_C07' and it run OK! However, when I change the InfoCube name to '/CPMB/WAIX8NE' (BPC InfoCube), everything goes wrong...
Is there any difference between extracting data from BPC and standard InfoCubes?
Thank you all!

Moderator message - Welcome to SCN.
But please do not cross and duplicate post.
Thread locked.
Rob

How to create Infosource with writing a ABAP program ?

Hi,
I want to create one program to create lot of infosources. Is there any Function module avilable for creating Infosource.
It should be attachment of flat file, infosource and data source.
Waiting for quick response.
Best regards,
BDP

Hi Anjali,
Thanks for the response.
I have passed the PSGNUM and HLEVEL values while populating the data records. Then I sent the data records and control record information to the function module IDOC_INBOUND_WRITE_TO_DB. Inside this function module there is code to clear the PSGNUM values and HLEVEL values.
for compatibility: clear administration data of data records
           perform data_records_wipe
                                  tables
                                      t_data_records.
FORM DATA_RECORDS_WIPE
                  TABLES
                      T_DATA_RECORDS_IN STRUCTURE EDIDD.
LOOP AT T_DATA_RECORDS_IN.
    CLEAR: T_DATA_RECORDS_IN-MANDT,
           T_DATA_RECORDS_IN-DOCNUM,
           T_DATA_RECORDS_IN-SEGNUM,
           T_DATA_RECORDS_IN-PSGNUM,
           T_DATA_RECORDS_IN-HLEVEL.
    modify t_data_records_in.
ENDLOOP.
ENDFORM.                               " DATA_RECORDS_WIPE
This is the code which is clearing all the PSGNUM and HLEVEL values. After coming out of this function module we are getting the error idocs created with disturbed hierarchy.
I need to create INBOUND Idocs with the data in ABAP program.
Please let me know if any inputs? Is there any function module existing to create Inbound Idocs inside an ABAP program?
Regards

Schedule Jobs with multiple steps via ABAP Program

Hi,
I need to schedule multiple programs via background jobs on a daily basis. Since all these jobs are to be run as a single job, the various programs have to be run as steps in a major job.
I am however not very clear on how this can be done via an ABAP program ( the idea of a program is that various parameters to be passed to each program in the step can be entered dynamically rather than via variants).
I am using the JOB_OPEN and JOB_CLOSE functions and submitting the programs with selection screen parameters dynamically passed to create a job. I need to do this for various programs as a job step (WITHOUT Variants being defined).
Can anyone suggest any ideas for this? I have tried out JOB_SUBMIT Function but am not very confident I know what exactly it is for as it asks for a variant.
Thanks very much,
Preet

Hi Preet,
just to be sure: you know, that variants can be dynamical, too?
It's quite usual to assign dynamical current date, but it's also possible to add / subtract value and even define own functionality.
Maybe it's easier to implement a dynamical selection and handle static jobs.
If you try to plan a job (online or with JOB_SUBMIT), you have to use variants - you can create (or change) them dynamical in beforehand. Only SE38, F8, F9 is creating a temporary variant, so that no saved variant is necessary.
But if you end up creating variants dynamical, you can change one existing variant, too. Then you can use a static job definition (with periodical starting rule).
So: have a look, if dynamic variants are enough, otherwise change variants per job.
Regards,
Christian

Create Node in Solar01 using ABAP Program

Hi Experts
In our project, the integration between ARIS and Solution Manager is not working. So the project team has decided to develop a workaround solution for this problem. The solution is we download all the BPP & BPS from ARIS into an excel file. We should upload the file and create the necessary BPP/BPS nodes in SOLAR01 using an ABAP program. Now we have the file and the below data in file.
We have the parent level SAP GUID in the file. Using this as reference we need to create the below two nodes.
ARIS Level 4 Sub-Process - This should be created as Solution Manager Business Process Node
ARIS Level 5 Task - This should be created as Solution Manager Business Process Step Node
Can anyone of you have done any similar development to the above? I will really appreciate if you can provide me with some function modules or any pseudo code or the approach to achieve this requirement.
Regards
Hari

Hi Hari,
There is no need of creating a program
this functionality is available in Solution manager 7.1 to upload via content files like excel sheet etc
https://help.sap.com/saphelp_sm71_sp05/helpdata/en/ea/7d9d444c404849bf99a0dd19f2107a/content.htm
you can refer my below article for all the steps
SAPexperts | How to Quickly Create Business Blueprints in SAP Solution Manager 7.1 Using Content Upload Interface
Thanks
Prakhar

How to create the condition record by ABAP program

Hi Friends,
I want to create/change the condition record of PR00 by ABAP program. It seems that there have no such BAPI/standard function can help on this. Can any one of you point out a way to me?? Thanks in addvance.
Joe GR.

Joe,
Check with below FM..
BAPI_PRICES_CONDITIONS.
Check this link:
Re: Sample code for BAPI_PRICES_CONDITIONS
examples....
http://www.4ap.de/abap/bapi_prices_conditions.php
Two useful threads on Same topic
Re: Sample code for BAPI_PRICES_CONDITIONS
Re: Problem with BAPI_PRICES_CONDITIONS
BAPI_PRICES_CONDITIONS
Please check this sample code from other thread.
wtable1-table_no = '306'.
wtable1-applicatio = 'V'.
wtable1-cond_type = 'ZPR0'.
wtable1-operation = '009'.
wtable1-varkey = '13001001USD 000000000050068946'.
wtable1-valid_to = '99991231'.
wtable1-valid_from = '20051101'.
wtable1-cond_no = '$000000001'.
APPEND wtable1 TO table1.
wtable2-operation = '009'.
wtable2-cond_no = '$000000001'.
wtable2-created_by = sy-uname.
wtable2-creat_date = '20051022'.
wtable2-cond_usage = 'A'.
wtable2-table_no = '110'.
wtable2-applicatio = 'V'.
wtable2-cond_type = 'ZPR0'.
wtable2-varkey = '13001001USD 000000000050068946'.
wtable2-valid_from = '20051101'.
wtable2-valid_to = '99991231'.
APPEND wtable2 TO table2.
wtable3-operation = '009'.
wtable3-cond_no = '$000000001'.
wtable3-cond_count = '01'.
wtable3-applicatio = 'V'.
wtable3-cond_type = 'ZPR0'.
wtable3-scaletype = 'A'.
wtable3-scalebasin = 'C'.
wtable3-scale_qty = '1'.
wtable3-cond_p_unt = '1'.
wtable3-cond_unit = 'EA'.
wtable3-calctypcon = 'C'.
wtable3-cond_value = '454'.
wtable3-condcurr = 'USD'.
APPEND wtable3 TO table3.
CALL FUNCTION 'BAPI_PRICES_CONDITIONS'
EXPORTING
PI_initialmode = 'X'
PI_BLOCKNUMBER =
TABLES
ti_bapicondct = table1
ti_bapicondhd = table2
ti_bapicondit = table3
ti_bapicondqs = table4
ti_bapicondvs = table5
to_bapiret2 = table6
to_bapiknumhs = table7
to_mem_initial = table8
EXCEPTIONS
update_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE table6 WITH KEY type = 'E' TRANSPORTING NO FIELDS.
IF sy-subrc = 0.
loop at table6 into ret.
write: / ret-type, ret-message, ret-id, RET-LOG_NO, RET-LOG_MSG_NO,
RET-MESSAGE_V1, RET-MESSAGE_V2, RET-MESSAGE_V3, RET-MESSAGE_V4,
RET-PARAMETER,RET-ROW,RET-FIELD.
endloop.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
*EXPORTING
WAIT =
IMPORTING
return = ret
ENDIF.
Don't forget to reward if useful....

Creating Infoset query based on ABAP program

Hello
I have 3 tables FEBEP, BKPF and BSEG and I need to join the 3 tables based on:
FEBEP-MANDT = BKPF-MANDT = BSEG-MANDT
FEBEP-NBBLN = BKPF-BELNR = BSEG-AUGBL
FEBEP-GJAHR = BKPF-GJAHR = BSEG-GJAHR
Then I have a few view fields from all the 3 tables. After this I can build an infoset query based on structure + ABAP program, and a generic datasource on top of it.
Can someone give me the ABAP code to be written SE38? Also should I select integrated program/external program in the infoset query?
Thanks,
Srini.

Hi,
Even if you create an ABAP program for infoset, you will writing a SELECT statement from BSEG table which is quite huge.
And you will putting JOIN with other tables.
Performance wise this is not advisble.
Why do not try the following other tables and check if the fields you need are available?
You can't join BSEG as it is a Cluster Table.In the place of BSEG you can use:
Account Recivables data use BSID and BSAD tables
GL Account Related data use BSIS and BSAS tables
Account payables data use BSIK and BSAK tables
Thanks.

How to add a new output type in sales order header via ABAP program

Hi All,
I have to add new output type (ex Z001) in sales order header via an ABAP program. please let me know how to do this.
Thank you all in advance.

Hi,
You can use the FM ..RV_MESSAGE_UPDATE..
Thanks
Naren

How to create a dynamic file via ABAP

Hi all,
We have a requirement of storing all internal table data into a temporary file in application server and later the same file will be passed as an input to shell script to meet our business requirement. Here I'm not sure how can we create a temporary file at run time through abap . I'm sure this is certainly possible via Java, Can any one suggest me how temporary file will be create via abap. Also please note that developer shouldn't give this file name any where from selection screen and system itself should create a file with certain name.
Please advise.
Thanks

Hope this helps: [Working with files |http://wiki.sdn.sap.com/wiki/display/ABAP/Workingwithfiles#Workingwithfiles-Workingwithfilesontheapplicationserver] you need to use open dataset stmt to create files in app server..
if you check the open dataset stmt in any examples in net, you will find the file name which is of type string... to generate a dynamic file name all you need to do is to build the file name dynamically say by using concatenate statements..
concatenate 'PROGNAME' sy-datum sy-uzeit into <filename>.
open dataset <filename> for input .

How to create crystal reports from ecc abap program?

Hi all,
I am new to sap ecc to bo report!!
I heard that abap program cannot be directly connected to crystal reports,
So created a function module which is equivalent to the abap program!!
And happened to connect the same in crystal !!
Can anyone let me know how to proceed !!
will be there any performance issue ?
can anyone guide me how to do reporting from ecc function module to crystal reports directly?
Thanks

Hi Pooja,
From what I know, not all ABAP programs can be accessed in Crystal Reports. The program should return rows and columns, otherwise, CR would not be able to report off it.
I'm not sure if there are any performance issues if we follow your path. Do you experience any?
And, do you need help in creating a report on the function module, I mean do you also have any design related queries?
-Abhilash

Parse XML streams via ABAP program or class

Hi all,
because of a new requirement we would like to create characteristics from a XML file by using the following structure.
xmlns:gdt="http://sap.com/xi/SAPGlobal/Global" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
We do not use SAP XI but I would like to parse the XML stream from a file in order to have the information available in a ABAP program. For this reason I'm looking for a standard SAP ABAP program or class to read and parse such a XML file.
I would appreciate if somebody have more details on this topic.

Check this out.
XML to ABAP
Regards,
Rich Heilman

Copy Attachement in CV03N via ABAP program

I would like to copy an attachment in CV03N to my C: drive. I can do this by right clicking on the file and selecting Copy To. I need to do this via an ABAP program. Is this possible?
Thanks Gary

Found the answer....
CALL FUNCTION 'CVAPI_DOC_VIEW' copies attachment from CV03N to my PC

Calling ITS Service via abap program

We have made an ITS Service (SAP GUI for HTML) for one of the R/3 programs (Customized).
If the URL is linked directly to the service, it shows correctly.
But if we call the service via transaction code as in: Call tcode Zabc..., it does not work.
How can we call the service directly from the abap program on the click of a button?
Thanks in advance.

Hi,
You can do something like this:
CALL FUNCTION 'CALL_BROWSER'
         EXPORTING
           url                          = path
           new_window                   = 'X'
         EXCEPTIONS
           frontend_not_supported       = 1
           frontend_error               = 2
           prog_not_found               = 3
           no_batch                     = 4
           unspecified_error            = 5
           OTHERS                       = 6
where PATH variable is ITS service url:
    CONCATENATE 'http://server:port/sap/bc/gui/sap/its/webgui?transaction=xxxxxx&okcode=xxxx INTO path.
Hope this helps,
Iván.

Create a DDic sturcture via ABAP program

Similar Messages

Maybe you are looking for