Create a new font

I have hand printed (which is my form of writing) the alphabet, scanned it to the desktop, and now want to import it into the Fonts application so that when I send a message out of Mail, it will be in my "handwriting".....can I do this?
G4 Mac OS X (10.4.9)

Sorry, no.

Similar Messages

Create a new Font style format in pages

I have looked very hard in pages and I cant seem to find a setting to change the default fonts and settings. I have just created a document with the settings I want and I saved it as a dummy that I just duplicate when I want to work with pages. Is there a way to create a new font style format so that you can just choose that style and get your settings? I just don't see how its possible that there is not a way to edit the default settings in pages...

Folders & file management is a function of OS X. Here is an Apple video tutorial on using Finder in OS X.

Issue with adding new fonts in Lion

I'm trying install two new fonts on my Mac Book Air and cannot get it to allow me to add them to the Font Book. (I've just successfully added the same fonts on to my Mac Book Pro which runs Snow Leopard, so this is definitely a Lion issue.)
I've created a new font library and then tried adding the fonts to it but it refuses to validate the font saying that '1 serious error was found. Do not use.' Any ideas of how to remedy this as I urgently need to use the font?
Many thanks.

Derp Derp Derp?? TestDerp Then Derpy Derp Derp

Memory Leak with new Font()

Hello all,
Not sure if this is the right place to post this but here goes. I have a program that needs to change the font of at least 250,000 letters, however after doing this the program runs slow and laggy as if changing the fonts of each letter took up memory and never released it? Here is a compilable example, Click the button at the bottom of the window and watch the letter it is currently working on. You will notice that around 200,000 it will begin to not smoothly count up anymore but count in kind of a skipping pattern. This seems to get worse the more you do it and seems to indicate to me that something is using memory and not releasing it. I'm not sure why replacing a letter's font with a new font would cause more memory to be taken up I would think if I was doing it properly it would simply replace the old font with the new one not taking anymore memory then it did before. Here is the example: This program sometimes locks up so be prepared. If someone could maybe point out what is causing this to take up more memory after changing the fonts that would be great and hopefully find a solution :) Thanks in advance.
-neptune692
* To change this template, choose Tools | Templates
* and open the template in the editor.
package paintsurface;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;
import java.util.List;
public class PaintSurface implements Runnable, ActionListener {
public static void main(String[] args) {
        SwingUtilities.invokeLater(new PaintSurface());
List<StringState> states = new ArrayList<StringState>();
Tableaux tableaux;
Random random = new Random();
Font font = new Font("Arial",Font.PLAIN,15);
//        Point mouselocation = new Point(0,0);
static final int WIDTH = 1000;
static final int HEIGHT = 1000;
JFrame frame = new JFrame();
JButton add;
public void run() {
        tableaux = new Tableaux();
        for (int i=250000; --i>=0;)
                addRandom();
        frame.add(tableaux, BorderLayout.CENTER);
        add = new JButton("Change Font of letters - memory leak?");
        add.addActionListener(this);
        frame.add(add, BorderLayout.SOUTH);
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setSize(WIDTH, HEIGHT);
        frame.setLocationRelativeTo(null);
        frame.setVisible(true);
public void actionPerformed(ActionEvent e) {
    new Thread(new ChangeFonts()).start();
void addRandom() {
        tableaux.add(
                        Character.toString((char)('a'+random.nextInt(26))),
                        UIManager.getFont("Button.font"),
                        random.nextInt(WIDTH), random.nextInt(HEIGHT));
//THIS CLASS SEEMS TO HAVE SOME KIND OF MEMORY LEAK I'M NOT SURE?
class ChangeFonts implements Runnable {
    public void run() {
    Random rand = new Random();
        for(int i = 0; i<states.size(); i++) {
            font = new Font("Arial",Font.PLAIN,rand.nextInt(50));
            states.get(i).font = font;
            add.setText("Working on letter - "+i);
class StringState extends Rectangle {
        StringState(String str, Font font, int x, int y, int w, int h) {
                super(x, y, w, h);
                string = str;
                this.font = font;
        String string;
        Font font;
class Tableaux extends JComponent {
        Tableaux() {
                this.enableEvents(MouseEvent.MOUSE_MOTION_EVENT_MASK);
                lagState = createState("Lag", new Font("Arial",Font.BOLD,20), 0, 0);
        protected void processMouseMotionEvent(MouseEvent e) {
                repaint(lagState);
                lagState.setLocation(e.getX(), e.getY());
                repaint(lagState);
                super.processMouseMotionEvent(e);
        StringState lagState;
        StringState createState(String str, Font font, int x, int y) {
            FontMetrics metrics = getFontMetrics(font);
            int w = metrics.stringWidth(str);
            int h = metrics.getHeight();
            return new StringState(str, font, x, y-metrics.getAscent(), w, h);
        public void add(String str, Font font, int x, int y) {
                StringState state = createState(str, font, x, y);
                states.add(state);
                repaint(state);
        protected void paintComponent(Graphics g) {
                Rectangle clip = g.getClipBounds();
                FontMetrics metrics = g.getFontMetrics();
                for (StringState state : states) {
                        if (state.intersects(clip)) {
                                if (!state.font.equals(g.getFont())) {
                                        g.setFont(state.font);
                                        metrics = g.getFontMetrics();
                                g.drawString(state.string, state.x, state.y+metrics.getAscent());
                if (lagState.intersects(clip)) {
                g.setColor(Color.red);
                if (!lagState.font.equals(g.getFont())) {
                    g.setFont(lagState.font);
                    metrics = g.getFontMetrics();
                g.drawString("Lag", lagState.x, lagState.y+metrics.getAscent());
}Here is the block of code that I think is causing the problem:
//THIS CLASS SEEMS TO HAVE SOME KIND OF MEMORY LEAK I'M NOT SURE?
class ChangeFonts implements Runnable {
    public void run() {
    Random rand = new Random();
        for(int i = 0; i<states.size(); i++) {
            font = new Font("Arial",Font.PLAIN,rand.nextInt(50));
            states.get(i).font = font; // this line seems to cause the problem?
            add.setText("Working on letter - "+i);
}

neptune692 wrote:
jverd wrote:
You're creating a quarter million distinct Font objects, and obviously you must be hanging on to all of them because each character is having its font set to the newly created object. So if you have 250k chars, you're forcing it to have 250k Font objects.
Since the only difference is that rand.nextInt(50) parameter, just pre-create 50 Font objects with 0..49, stick 'em in the corresponding elements in an array, and use rand.nextInt to select the Font object to use.That does make sense but it does that when the the program is first launched and doesn't lag. But the second and third time you change the letters font it seems to lag so if it wasn't taking up more memory the second time it should perform like it did when it first launched. I don't care to investigate any further. The real problem is almost certainly the quarter million Font objects. It could be that 250k is fine, but by the time you get to 500k, it has to do a lot of GC, and that's where the slow down is coming. You might even be able to make it work better with the code you have just by tweaking the GC parameters at startup, but I wouldn't bother. Fix the code first, and then see if you have issues.
Does creating a new font for each of those letters not replace the old font object? If it didn't use more memory the second and third time I don't think you would see the skipping in the counter and the slowing down of the iterations. So it must be remembering some of the old font objects or am I wrong?Using new always creates a new object. When you do it the second time around, and call letter.setFont(newFont), the old Font object is eligible for GC. That doesn't mean it will be GCed right away though. The JVM can leave them all laying around until it runs out of memory, and then GC some or all of them.

How to install new Fonts

Hi everybody,
only with one question, i need to create a new style for my SAPscripts printing and when i create my Paragraph(SE72) and try to use a size for times new roman font, the system send me a message informing that there isn't this font size for <b>times new roman</b>,
question, somebody knows, how to add new sizes? or fonts to my SAP client!? or what can i do, if i need a specific font size and my SAP doesn't have it.
Regards and thanks
Emilio

Check the below link:
http://www.sap-basis-abap.com/sapbs043.htm
Create a new font type with the spool administrator (SPAD)
When you need some different fonts other than those available in the standard SAP system, you'll have to create those different fonts size manually for the device types that you are using.
http://www.sapfans.com/forums/viewtopic.php?t=258700&sid=e023b90008c9ee1843c00fc3cf2fcee6
Prakash.
COPY SAP STANDARD DEVICE TYPE TO ZXXXX e.g. ZHPLJ4
SPAD - Spool Administration
Full administration
Device Types - ZHPLJ4 (then click Device Types)
Utilities -> For device type -> Copy device type
Print Controls - Copy an existing Print Control and change the ControlCharacter sequence
SE73 - SAPscript Font Maintenance
Printer fonts - Change
Double click on the ZXXXX device type
Create
Font family COURIER
Font size 030
Characters per inch 21.00
Print control 1 SFXXX
Print control 2 SFXXX

New font for script

hi,
is it possible for me to add a new font, which is not in the SAP?
currently i need to add a font "Gill_Sans" into my PO, using script.
i tried to seach under the font family in the display paragraph location in Script, but cant find it.
can anyone please teach me how am i going to add this or change on it? thanks

Hi,
Import new Font in SAP Script/ Smartforms.
Check the below link:
http://www.sap-basis-abap.com/sapbs043.htm
Create a new font type with the spool administrator (SPAD)
When you need some different fonts other than those available in the standard SAP system, you'll have to create those different fonts size manually for the device types that you are using.
http://www.sapfans.com/forums/viewtopic.php?t=258700&sid=e023b90008c9ee1843c00fc3cf2fcee6
COPY SAP STANDARD DEVICE TYPE TO ZXXXX e.g. ZHPLJ4
SPAD - Spool Administration
Full administration
Device Types - ZHPLJ4 (then click Device Types)
Utilities -> For device type -> Copy device type
Print Controls - Copy an existing Print Control and change the ControlCharacter sequence
SE73 - SAPscript Font Maintenance
Printer fonts - Change
Double click on the ZXXXX device type
Create
Font family COURIER
Font size 030
Characters per inch 21.00
Print control 1 SFXXX
Print control 2 SFXXX
Reward points if this Helps.
Manish

Font used when I give new Font("Default",....

Hi,
When I create a font using new Font("Default",..
which font will be actually used?
In jdk1.4 the created font shows family=sansserif and font=Default in string representation.
But in jdk1.4.2 the created font shows family=Default and font=Default in string representation.
Both these fonts have entirely different behaviours.
In my application "Default" font is used at many files and I don't want to change this in all places, when I port my appilcation to 1.4.2
Any body know, from where I can set the font to be taken for "Default".
I couldn't find any thing in font.properties.
Please help....
Regards,
Jojo

public Font(String name, int style, int size)Creates a new Font from the specified name, style and point size.
Parameters:
name - the font name. This can be a logical font name or a font face name. A logical name must be either: Dialog, DialogInput, Monospaced, Serif, or SansSerif. If name is null, the name of the new Font is set to the name "Default".
So, you're following none of the Font creation specifications, and just putting "Default" into name parameter directly. Not surprising it doesn't work as expected.
I'd say either replace all your "Default" font name parameters with a
null and let the Font() constructor properly setup it's own
"Default" font, or replace them all with the logical font name that
you actually want - "SanSerif"

In Dreamweaver 6, I created a new fluid layout. I set up (4) DIVs. In the 3rd div, I changed the font color. The new color shows up on the website when viewed in my computer desktop, but, when viewed in a tablet and a cell phone, the color of the font doe

In Dreamweaver 6, I created a new fluid layout. I set up (4) DIVs. In the 3rd div, I changed the font color. The new color shows up on the website when viewed in my computer desktop, but, when viewed in a tablet and a cell phone, the color of the font does not change. It's the same in Dreamweaver's Live view. It shows the new color on Desktop view and not in the cell phone or tablet view. Also, I changed the font itself in one of the DIVs and it shows up in the new font on the desktop view and website viewed thru the computer, but, not on the tablet or cell phone. Can someone please explain. I want to be able to change the fonts and colors for viewing in the tablet and cell phone, also. The fonts were all standard fonts. Sans-erif and Verdana and Arial were tried. Thanks.

I will lock this discussion because of duplicate post.

How create new font in sap

Hi,
We want use Times roman in our smart form.
i tried to load the fonts using spad and se73.
still it is not reflecting in the report.
regards,
viren.

Hi,
Apart from SE73 i think that you have to create a new print control, which will probably contain the name of the font in hexadecimal code. I am not very sure of that but you can find the following SAP note a bit helpful...
<b>SAP Note Number: 12462
How can I define a new printer font?</b>Version: 7, Note Language: EN, Released on: 28.08.1998
Symptom
Key word: Printer font
What settings have to be made to define a new font for an R/3 device type (that is, a new printer font) that can be used for SAPscript documentation output.
Additional key words
Printer, font, printer font, device type, fontmetrics, AFM file, SE73
Cause and prerequisites
You would like to use a new font on the printer.
Solution
General advice:
1. This procedure can be used only if the desired font is available on the printer (that is, installed on the printer itself, installed via font cassette, resident in the printer via softfont download or, in case of device type SAPWIN/WIN, installed on the Windows PC) and can be called with a short printer command (max. 29 bytes). This printer command is maintained in the print control.
Solution procedure:
1. The original SAP printer type used previously must be copied to a customer printer type with a name starting with Z... (see Note 3166 for reasoning behind this). The function "Utilities->Copy device type" from transaction SPAD (spool administration) is used for this.
Example: HPLJIIID is copied to ZHPLJ3.
2. A new print control SFxxx must be maintained for device type Z.... It contains in most cases the printer control commands for setting the desired font. To find out what this printer command looks like, refer to the printer manual and the print controls SFxxx already contained in printer definition Z... . A certain amount of knowledge of the printer language is a prerequisite. The xxx numbering of the SFxxx print controls is arbitrary.
NOTE: The exact contents of the SFxxx print controls depend on the SAPscript printer driver used. For information on this, consult the CD documentation ("Basis system administration printer handbook") and the field documentation (F1 help) for input field "Print control" in SE73, Printer font maintenance.
Printer driver HPL2 (PCL 5 printer):
SFxxx must contain the PCL 5 command for character set and print selection. CAUTION: As of Release 4.0A there are special rules which apply if the flag "Scalable font" is activated.
Printer driver POST (Post script printer):
SFxxx must contain the name of the Post script font, for example "Helvetica"
Printer driver PRES (Kyocera PRESCRIBE printer):
SFxxx must contain the PRESCRIBE command "FONT xx:" for font selection, for example "FONT 42;"
Printer driver SWIN (Windows print via SAPWIN/SAP1pd):
SFxxx must contain the Windows font name. CAUTION: As of Release 4.0A special rules apply if the flag "Scalable font" is activated for the printer font.
Printer driver STN2 (Target printer):
SFxxx must contain the complete command for the selection of the
character set, the increment, bold and italic print and font.
Print control SFxxx is defined for device type Z... in transaction SPAD under the heading "Print control for device type". Example: print control SF900 for device type ZHPLJ3 with replacement text (i.e. printer command)
1B28304E1B28733070313068313276307330623354 is created.
3. In the SAPscript font maintenance transaction SE73 under "Printer fonts", a new entry must be made for the desired font on the desired device type. The following information must be given:
     device type Z...
(printer type to which the font belongs)
     family   ....
(Font name used in R/3, for example COURIER, HELVE, LETGOTH, LNPRINT, TIMES)
     size      ...
(Font size 1/10 point, for example 240, for printer drivers that support scalable fonts, 000 is entered here)
     bold      .
(X if bold type, otherwise blank)
     italic    .
(X if italic type, otherwise blank)
     CPI       ..,..
(number of characters per inch (CPI)
If font is not a proportional font (for example HELVE,TIMES),
for example 05.00)
     PrtCtl 1 SFxxx
(Refer to field documentation (F1 Document) for exact meaning. The name of the 2nd created printer control is normally entered here.
     PrtCtl 2 SFxxx
Refer to field documentation (F1 document) for exact meaning. The name of the 2nd created printer control is normally entered here.
If the font is a proportional font (HELVE or TIMES), an AFM file that contains the width values for the individual characters in the font must be entered under "Printer fonts" in SE73. Direct maintenance of the AFM data is done from the list of printer fonts with Menu "Edit -> fontmetric using a menu function. To do this you place the cursor on the line with the newly created printer font and choose "Edit->Copy fontmetrics" on the menu. If you have created, for example, a new printer font
ZHPLJ3 HELVE 200 _ _
you can copy the metric of
ZHPLJ3 HELVE 160 _ _
here.
Releases before 3.0A do not have this menu function, and you must manually copy the AFM files from the group box to the new printer font via the XX.XX function in the AFM editor. Then the new AFM files can be checked for correctness (Menu "Fontmetrics ->Check") and saved.
As of Release 3.0 it is possible to establish a link to the fontmetrics of another device type or to a default (all characters with width 500) instead of copying the fontmetrics explicitly. You can check the correctness of the complete font definition in SE73 in the list of printer fonts with the function "Edit->Generate font def.".
4. As a final step, the device type of the output device used must be changed from the SAP original to the new printer definition Z... in transaction SPAD. This is done in SPAD under the heading "Output devices".
Example: printer LP05 previously had device type HPLJIIID and is now being given device type ZHPLJ3.
Source code corrections
Thanks and Regards,
Bharat Kumar Reddy.V

I created an outline font and manipulated to create a new logotype. now i want to created a solid font from the outline as a single stroke -- how?

i created an outline font and manipulated to create a new logotype. now i want to created a solid font from the outline as a single stroke -- how?

g,
As I (mis)understand it, you may have a look at the ways suggested in these threads, increasing the Stroke Weight as desired after creating the centre path:
Re: How to make perfect thin inner outline of text?
Typography effect

Transaction Code to create new fonts.

Hello,
Please tell me a Transaction Code to create new fonts.
Regards,
Roshan Lilaram Wadhwani.

Hi Roshan...
Please check se73.. but I dont think u can create any new.. just can change the values.
Regards,
Vishwa.

Creating new fonts

is there a way to create a brand new font from scratch and add it to Font Book and use it to type with?
or if you can find a font that looks like grafitti (not the artsy type)

is there a way to create a brand new font from scratch and add it to Font Book and use it to type with?
Yes, but you need specialized tools and it can be quite complex and time consuming. If you can describe what it is you are looking for, perhaps someone can suggest one already made.
The main tools are:
http://fontforge.sourceforge.net/
http://www.fontlab.com/

Error while creating a new account in Publication Registry in OSR

Hi
I faced the following error during the registration of an new account in Publication registry throws the Fatal Error and generates the following log details.
Please help me out of the problem.
Error Code: 13001
Fatal Errrors in account management.Please contact Adminsitartor
Caused by: javax.xml.messaging.JAXMException: org.systinet.wasp.client.XMLInvoca
tionException: Exception while processing incoming message message. Unable to re
ad server response. Server returned status code: 404 (Not found) (Content-type:t
ext/html; charset=UTF-8):
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
<HTML>
<HEAD>
<TITLE>Error 404--Not Found</TITLE>
<META NAME="GENERATOR" CONTENT="WebLogic Server">
</HEAD>
<BODY bgcolor="white">
<FONT FACE=Helvetica><BR CLEAR=all>
<TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
<FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 404--Not Found</H2>
</FONT></TD></TR>
</TABLE>
<TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=
white><FONT FACE="Courier New"><FONT FACE="Helvetica" SIZE="3"><H3>From RFC 2068
<i>Hypertext Transfer Protocol -- HTTP/1.1</i>:</H3>
</FONT><FONT FACE="Helvetica" SIZE="3"><H4>10.4.5 404 Not Found</H4>
</FONT><P><FONT FACE="Courier New">The server has not found anything matching th
e Request-URI. No indication is given of whether the condition is temporary or p
ermanent.</p><p>If the server does not wish to make this information available t
o the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone
) status code SHOULD be used if the server knows, through some internally config
urable mechanism, that an old resource is permanently unavailable and has no for
warding address.</FONT></P>
</FONT></TD></TR>
</TABLE>
</BODY>
</HTML>
at com.systinet.jaxm.messaging.ProviderConnectionImpl.call(ProviderConne
ctionImpl.java:145)
at org.systinet.uddi.client.UDDIClientProxy.invoke(UDDIClientProxy.java:
217)
... 38 more
Caused by: org.systinet.wasp.client.XMLInvocationException: Exception while proc
essing incoming message message. Unable to read server response. Server returned
status code: 404 (Not found) (Content-type:text/html; charset=UTF-8):
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
<HTML>
<HEAD>
<TITLE>Error 404--Not Found</TITLE>
<META NAME="GENERATOR" CONTENT="WebLogic Server">
</HEAD>
<BODY bgcolor="white">
<FONT FACE=Helvetica><BR CLEAR=all>
<TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
<FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 404--Not Found</H2>
</FONT></TD></TR>
</TABLE>
<TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=
white><FONT FACE="Courier New"><FONT FACE="Helvetica" SIZE="3"><H3>From RFC 2068
<i>Hypertext Transfer Protocol -- HTTP/1.1</i>:</H3>
</FONT><FONT FACE="Helvetica" SIZE="3"><H4>10.4.5 404 Not Found</H4>
</FONT><P><FONT FACE="Courier New">The server has not found anything matching th
e Request-URI. No indication is given of whether the condition is temporary or p
ermanent.</p><p>If the server does not wish to make this information available t
o the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone
) status code SHOULD be used if the server knows, through some internally config
urable mechanism, that an old resource is permanently unavailable and has no for
warding address.</FONT></P>
</FONT></TD></TR>
</TABLE>
</BODY>
</HTML>
at com.systinet.wasp.client.XMLInvocationHelperImpl._receive(XMLInvocati
onHelperImpl.java:699)
at com.systinet.wasp.client.XMLInvocationHelperImpl._receive(XMLInvocati
onHelperImpl.java:617)
at com.systinet.wasp.client.XMLInvocationHelperImpl._call(XMLInvocationH
elperImpl.java:145)
at com.systinet.wasp.client.XMLInvocationHelperImpl.call(XMLInvocationHe
lperImpl.java:77)
at org.systinet.wasp.client.XMLInvocationHelper.call(XMLInvocationHelper
.java:18)
at com.systinet.jaxm.messaging.ProviderConnectionImpl.call(ProviderConne
ctionImpl.java:141)
... 39 more
Caused by: java.io.IOException: Unable to read server response. Server returned
status code: 404 (Not found) (Content-type:text/html; charset=UTF-8):
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
<HTML>
<HEAD>
<TITLE>Error 404--Not Found</TITLE>
<META NAME="GENERATOR" CONTENT="WebLogic Server">
</HEAD>
<BODY bgcolor="white">
<FONT FACE=Helvetica><BR CLEAR=all>
<TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
<FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 404--Not Found</H2>
</FONT></TD></TR>
</TABLE>
<TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=
white><FONT FACE="Courier New"><FONT FACE="Helvetica" SIZE="3"><H3>From RFC 2068
<i>Hypertext Transfer Protocol -- HTTP/1.1</i>:</H3>
</FONT><FONT FACE="Helvetica" SIZE="3"><H4>10.4.5 404 Not Found</H4>
</FONT><P><FONT FACE="Courier New">The server has not found anything matching th
e Request-URI. No indication is given of whether the condition is temporary or p
ermanent.</p><p>If the server does not wish to make this information available t
o the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone
) status code SHOULD be used if the server knows, through some internally config
urable mechanism, that an old resource is permanently unavailable and has no for
warding address.</FONT></P>
</FONT></TD></TR>
</TABLE>
</BODY>
</HTML>
at com.systinet.wasp.soap.MessageSourceImpl.init(MessageSourceImpl.java:
208)
at com.systinet.wasp.soap.MessageSourceFactoryImpl.getMessageSource(Mess
ageSourceFactoryImpl.java:36)
at com.systinet.wasp.client.XMLInvocationHelperImpl._receive(XMLInvocati
onHelperImpl.java:664)
... 44 more
ERROR: com.systinet.uddi.webui.WebUIRawService - Web Framework exception
EXCEPTION: com.systinet.uddi.webui.WebUIException: (18003) UDDI error occurred.
javax.servlet.ServletException: com.systinet.uddi.webui.WebUIException: (18003)
UDDI error occurred.
at com.systinet.webfw.servlet.WebFilterChain.doFilter(WebFilterChain.jav
a:42)
at com.systinet.webfw.security.InternalSecurityFilter.doFilter(InternalS
ecurityFilter.java:55)
at com.systinet.webfw.servlet.WebFilterChain.doFilter(WebFilterChain.jav
a:36)
at com.systinet.webfw.WebRawService.process(WebRawService.java:329)
at com.idoox.wasp.server.adaptor.RawAdaptorImpl.dispatch(RawAdaptorImpl.
java:318)
at com.idoox.wasp.server.AdaptorTemplate.doDispatch(AdaptorTemplate.java
:356)
at com.idoox.wasp.server.AdaptorTemplate.dispatch(AdaptorTemplate.java:3
28)
at com.idoox.wasp.server.ServiceConnector.dispatch(ServiceConnector.java
:393)
at com.systinet.wasp.ServiceManagerImpl.dispatchRequest(ServiceManagerIm
pl.java:638)
at com.systinet.wasp.ServiceManagerImpl.dispatch(ServiceManagerImpl.java
:473)
at com.systinet.wasp.ServiceManagerImpl$DispatcherConnHandler.handlePost
(ServiceManagerImpl.java:2594)
at com.systinet.transport.servlet.server.Servlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
tyHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:300)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:183)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.wrapRun(WebAppServletContext.java:3717)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppS
ervletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletC
ontext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.j
ava:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: com.systinet.uddi.webui.WebUIException: (18003) UDDI error occurred.
at com.systinet.uddi.webui.component.account.CreateAccount.process(Creat
eAccount.java:163)
at com.systinet.webfw.TaskDispatcher.processComponent(TaskDispatcher.jav
a:758)
at com.systinet.webfw.WebRawService.service(WebRawService.java:494)
at com.systinet.webfw.servlet.WebFilterChain.doFilter(WebFilterChain.jav
a:40)
... 26 more
Caused by: org.systinet.uddi.account.AccountException: Fatal error occurs in acc
ount management. For help please contact the administrator of the registry.
at com.systinet.uddi.account.InterceptorProxy.invoke(InterceptorProxy.ja
va:73)
at $Proxy208.save_userAccount(Unknown Source)
at com.systinet.uddi.account.AccountApiImpl.save_userAccount(AccountApiI
mpl.java:93)
at com.systinet.uddi.webui.component.account.CreateAccount.process(Creat
eAccount.java:142)
... 29 more
ERROR: com.systinet.uddi.webui.WebUIRawService - ===============================
========================================
ERROR: com.systinet.uddi.webui.WebUIRawService -
EXCEPTION: Fatal error occurs in account management. For help please contact th
e administrator of the registry.
org.systinet.uddi.account.AccountException: Fatal error occurs in account manage
ment. For help please contact the administrator of the registry.
at com.systinet.uddi.account.InterceptorProxy.invoke(InterceptorProxy.ja
va:73)
at $Proxy208.save_userAccount(Unknown Source)
at com.systinet.uddi.account.AccountApiImpl.save_userAccount(AccountApiI
mpl.java:93)
at com.systinet.uddi.webui.component.account.CreateAccount.process(Creat
eAccount.java:142)
at com.systinet.webfw.TaskDispatcher.processComponent(TaskDispatcher.jav
a:758)
at com.systinet.webfw.WebRawService.service(WebRawService.java:494)
at com.systinet.webfw.servlet.WebFilterChain.doFilter(WebFilterChain.jav
a:40)
at com.systinet.webfw.security.InternalSecurityFilter.doFilter(InternalS
ecurityFilter.java:55)
at com.systinet.webfw.servlet.WebFilterChain.doFilter(WebFilterChain.jav
a:36)
at com.systinet.webfw.WebRawService.process(WebRawService.java:329)
at com.idoox.wasp.server.adaptor.RawAdaptorImpl.dispatch(RawAdaptorImpl.
java:318)
at com.idoox.wasp.server.AdaptorTemplate.doDispatch(AdaptorTemplate.java
:356)
at com.idoox.wasp.server.AdaptorTemplate.dispatch(AdaptorTemplate.java:3
28)
at com.idoox.wasp.server.ServiceConnector.dispatch(ServiceConnector.java
:393)
at com.systinet.wasp.ServiceManagerImpl.dispatchRequest(ServiceManagerIm
pl.java:638)
at com.systinet.wasp.ServiceManagerImpl.dispatch(ServiceManagerImpl.java
:473)
at com.systinet.wasp.ServiceManagerImpl$DispatcherConnHandler.handlePost
(ServiceManagerImpl.java:2594)
at com.systinet.transport.servlet.server.Servlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
tyHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:300)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:183)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.wrapRun(WebAppServletContext.java:3717)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppS
ervletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletC
ontext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.j
ava:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

Hi,
It look two ways either you dont have permission to write any new thing to that domain.properties file or might file is got corrupted.
Please check for the permission to that file.
Regards,
Kal.

How can i create a new user?

Is it possible to create a new portal user with java(or jsp) which is writen by myself?
The program makes user become a new member automatically when he login.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Allen Lin ([email protected]):
Is it possible to create a new portal user with java(or jsp) which is writen by myself?
The program makes user become a new member automatically when he login.<HR></BLOCKQUOTE>
This is definitly possible. In my perspective
it consist out of two steps: customing your login-screen and making a procedure which adds an new user to portal.
The customizing of the login screen is only a extra call to the new procedure.
The procedure is a bit more diffcult, you have to make an user and add rights to him.
I already have a document containing the way to customize a loginscreen.
I also have a sql-package wich adds an user to portal(from outside portal), but the description and inline documentation are in dutch. So I have to do some work on that.
If you are interesed mail me at [email protected]
regards
arny

Creating a new chart in PowerPoint 2013 with Chart Styles applied

In PowerPoint 2013 when I manually insert a new chart into a slide, the chart automatically has the Chart Style "Style 1" applied. This has the effect of setting the font sizes of chart labels to 12.
However, no Chart Styles are applied if I try to add a new chart to PowerPoint 2013 using the following C# code:
var ppt = new Microsoft.Office.Interop.PowerPoint.Application();
var presentation = ppt.Presentations.Add();
var layout = Microsoft.Office.Interop.PowerPoint.PpSlideLayout.ppLayoutChart;
var slide = presentation.Slides.Add(1, layout);
var shapes = slide.Shapes;
shapes.AddChart();
Font sizes seem to default to 18. Is there any way to create a chart or to set Chart Styles using Interop so that it matches a chart produced manually (i.e. has Chart Styles applied)?
I am aware of the Chart.ChartStyle property but it only seems to change chart colors and legend placement, not font size. There is no Macro recorder in PowerPoint, so I can't generate VBA code to replicate the action of creating a new chart.

Hi
>> there any way to create a chart or to set Chart Styles using Interop so that it matches a chart produced manually (i.e. has Chart Styles applied)?
You can add using shapes.AddChart2() instead of the last sentence shapes.AddChart(), I have tested in my projects, if I using AddChart(), the label size and the space will be different from manually insert a chart into a slide, but AddChart2() is the same
with manually operating.
And This object, member, or enumeration is deprecated and is not intended to be used in your code.
More details you cab refer to the following link
https://msdn.microsoft.com/en-us/library/microsoft.office.interop.excel.shapes.addchart.aspx
Best Regards
Lan
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Create a new font

Similar Messages

Maybe you are looking for