Create an Object in Logical standby database in Oracle 10G

Hi,
I have logical standby database in oracle 10g R2 for reporting purpose.Now i want to create procedure in logical standby which is use to create new temp table in logical standby and contained data generated from select operation on existing table.
Can i create a new user in logical standby database,add new tablespace in logical standby which can insert,update and delete data in standby database base table?
kindly provide me the steps to implement all this.What will be effect if i set guard_Status in v$database is NONE in logical standby?
Thanks,
Shital Patel

Hi Shital,
Guard_status protects the data from being changed.
ALL- By default it is not possible for a non-privileged user to modify data on a data guard SQL apply database. This is because the database guard is automatically set to ALL.
With this level of security, only SYS user can modify the data.
STANDBY- When you set this level of security, users are able to modify data that is not maintained by the Logical apply engine.
NONE permits any users to access the standby database as long as they have correct privileges. This is the normal security for all data in the database.
You can change the guard status value from ALL to NONE in order to allow non-privileged users to modify data and Yes you can create user and extra tablespace in logical standby database..this is what the one of advantage of using Logical standby database.
SQL> ALTER DATABASE GUARD NONE;
Thanks

Similar Messages

Creating new tables in Logical Standby database

Hi
I have a requirement to create new tables in logical standby database. These tables will not be present on primary database. Is it possible to do this ?
I have a new schema already created which has the privilege to CREATE new table.
I have stopped the logical standby apply.
When I am now trying to create a new table but it is failing with error : insufficient privileges.
When I am trying to run below statement on new schema it is also failing with error of insufficient privileges.
alter session disable dataguard;
Please help.

user8819121 wrote:
Thanks Mahir,
I was able to create the table after logging in as sysdba.
But I need my user on that table to execute DML statements. My user has privileges to insert,delete and update any table.
I tried the following statements to disable the guard but it is sill not working
ALTER DATABASE GUARD STANDBY.
Do I need to skip the tables created using dbms_logstdby package to not making it part of SQL Apply ? I guess not since the table is not in primary database.
Amit
You can skip only on primary, your created schema on Standby is not in primary.
Then you must change Status of data guard to NONE. NONE is means is not any security on your data.
In Guard status NONE can change all schema data.
Please check link: http://docs.oracle.com/cd/E11882_01/server.112/e10700/manage_ls.htm#CHDGFGHG
Following tests on user created before guard status is change from ALL to STANDBY.
C:\Users\Administrator>sqlplus / as sysdba
SQL> conn test/test
Connected.
SQL> select table_name from user_tables;
TABLE_NAME
T
SQL> insert into t values(22);
insert into t values(22)
ERROR at line 1:
ORA-16224: Database Guard is enabled
SQL> conn / as sysdba
Connected.
SQL> select guard_Status from v$database;
GUARD_S
ALL
SQL> alter database guard standby;
Database altered.
SQL> conn test/test
Connected.
SQL> insert into t values(1);
insert into t values(1)
ERROR at line 1:
ORA-16224: Database Guard is enabled
SQL> conn / as sysdba
Connected.
SQL> select guard_Status from v$database;
GUARD_S
STANDBY
SQL> alter database guard none;
Database altered.
SQL> select guard_Status from v$database;
GUARD_S
NONE
SQL> conn test/test
Connected.
SQL> insert into t values(1);
1 row created.
SQL> commit;
Commit complete.And Now I want share with you new tests :)
Now user creating when after guard status change
SQL> drop user test cascade;
User dropped.
SQL> select guard_status from v$database;
GUARD_S
STANDBY
SQL> create user test identified by test;
User created.
SQL> grant create session, resource, create table to test;
Grant succeeded.
SQL> conn test/test
Connected.
SQL> create table t (n number);
Table created.
SQL> insert into t values(1);
1 row created.
SQL> commit;
Commit complete.
SQL>It means when guard status is ALL then all of user created guarding.
When you changed status to STANDBY then Logical Standby guard only primary schema and created schema before change.
NONE is not guard any schema. it means you can delete standby schema data too.
Regards
Mahir M. Quluzade
Edited by: Mahir M. Quluzade on Apr 19, 2013 4:07 PM

To create standby database using oracle 10g standared edition

my producation database is oracle 10G standard edition .Can i implement a oracle dataguard or standby database using standard edition licenses.if standby database is possiable in standard edition .what are the steps for creating a standby database using oracle 10g standard edition.

General answer is http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/editions.htm#BABJICBB.
For Data Guard you cannot :
- use instance parameters to automatically send archived redo logs
- use instance parameters to resolve archived redo logs gaps
- create a logical standby
- use SQL statements to do switchover / failover
- use Data Guard Broker.

Can i create a standby database in oracle 10g standared edition ?

what are the steps required for creating a standby database using oracle 10g standard edition. or Any other feature for mirroring database in oracle 10g standared edition

Dear mithun,
Please read the following online documentation;
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14239/standby.htm
+"+
+2.3.2 Oracle Software Requirements+
+The following list describes Oracle software requirements for using Data Guard:+
+* Oracle Data Guard is available only as a feature of Oracle Database Enterprise Edition. It is not available with Oracle Database Standard Edition. This means the same release of Oracle Database Enterprise Edition must be installed on the primary database and all standby databases in a Data Guard configuration.+
+Note:+
+It is possible to simulate a standby database environment with databases running Oracle Database Standard Edition. You can do this by manually transferring archived redo log files using an operating system copy utility or using custom scripts that periodically send archived redo log files from one database to the other. The consequence is that this configuration does not provide the ease-of-use, manageability, performance, and disaster-recovery capabilities available with Data Guard.+
+"+
Hope That Helps.
Ogan

Creating triggers in a logical standby database

Does anyone know if its possible to create and enable a trigger in a logical standby database on a 'guarded' table? I've been able to create the trigger (as an after insert trigger) and it appears to be valid but it never seems to fire, despite inserts taking place. Are there any other steps involved to activate this, or is it just plain not possible in a logical standby? My primary and logical standby databases are 10.2.0.3

HI Daniel,
I appreciate your quick response.
My choice of name may not have been ideal, however changing new to another name - like gav - does not solve the problem.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_gav
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user gav
2 identified by gav
3 default tablespace ts_gav
4 temporary tablespace temp
5 quota unlimited on ts_gav
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to gav
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to gav
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to gav
SYS@UATDR> select * from dba_sys_privs where grantee='GAV'
2 /
GRANTEE PRIVILEGE ADM
GAV CREATE TABLE NO
GAV CREATE ANY TABLE NO
GAV UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect gav/gav
Connected.
GAV@UATDR>
GAV@UATDR> -- prove ability to create tables
GAV@UATDR> create table gav
2 (col1 number not null)
3 tablespace ts_gav
4 /
create table gav
ERROR at line 1:
ORA-01031: insufficient privileges
GAV@UATDR>

Creation of Standby Database on Oracle 10g Standard Edition

Hi Gurus,
Can anyone let me know how to create physical standby database on Oracle 10.2.0.1(Standard Edition). I am using the Fedora7(32-bit) machine. Can anyone please send me some documentation on how to create.
Thanks in advance.
Thanks & Regards,
Farooqui.

How to create physical standby database without dataguard

Standby Database on Oracle 10g Standard Edition ?

Hi All,
Is it possible to do Oracle Stand By Database on Oracle 10g SE ?
I read somewhere in this group that we can do standby database even in SE by writing a script that copy the archive log to the secondary server.
Is this approach reliable enough to be done in production ?
Does anybody have sample of the script ?
Thank you for your help,
xtanto

Hi,
Well, I think I'd beter put the scripts right there. Remember, they have been tested under MY environment, using MY releases, MY O.Ses. It's up to you to check whether the're valid for you. They are provided as is, for sample.
There are 4 files:
. generic.sh : you can duplicate this file in order to set up as many standby as needed, etc. It calls other scripts in order to:
. archivemove.sh : Get the archived redo logs to the standby host
. recover.sh : Synch the standby
. getrecid.sql : get the maximum progess point on the Manual Standby (used by archivemove.sh)
These scripts are used from the standby host. Remember to throughly check it before relying on it for production.
generic.sh
#!/bin/sh
# Be sure environment variable are set. If not, then it might fail!
# These environment variables are those for the Manual Physical Standby host
export ORACLE_HOME=/logical/oracle/Ora9i
export ORACLE_BASE=/logical/oracle
export ORACLE_STANDBY=tns_alias
export ORACLE_STANDBY_SYSDBA_PASS=change_on_install
export PATH=$ORACLE_HOME/bin:$PATH
export SOURCE_HOST=primary_host
export SOURCE_DRIVE=/primary/absolute/path/to/archived/redo/logs
export LOCAL_ARC_PARTH=/path/to/logical/archive/dest
# Check the date command usage depending on the platform
dateexec=`date "+%Y-%m-%d-%H-%M"`
# copy archived redo logs from main database
archivemove.sh > $dateexec.generic.log
# recover/sync the Manual Standby Database
recover.sh >> $dateexec.generic.log
archivemove.sh
#!/bin/sh
echo ----------------------------------------------------------------
echo ----------------------------------------------------------------
echo Get what log has last been applied to: $ORACLE_STANDBY
echo ----------------------------------------------------------------
sqlplus /nolog @getrecid.sql $ORACLE_STANDBY
echo ----------------------------------------------------------------
maxval=`tail -1 recid.log`
echo maxval=$maxval
rm recid.log
echo ----------------------------------------------------------------
# Check source drive to see what we're missing locally (source = primary)
for filename in `remsh $SOURCE_HOST 'ls $SOURCE_DRIVE' | sort`
do
     # get archive number.
     # WARNING here I'm based on MY archived redo log name format! Put yours for the cut
     filename_parsed=`echo $filename | cut -c12-16`
     # Check if the number is after the last one applied to standby
     if [ $filename_parsed -gt $maxval ]
     then
          # grab it!
          echo $filename
          rcp $SOURCE_HOST:$SOURCE_DRIVE/$filename $LOCAL_ARC_PARTH
     fi
done
echo ----------------------------------------------------------------
echo Removing old files
echo ----------------------------------------------------------------
# Check in local directory
for filename in `ls $LOCAL_ARC_PATH | sort`
do
     # WARNING again about filename format
     filename_parsed=`echo $filename | cut -c12-16`
     # Check the arc number...
     if [ $filename_parsed -lt `expr $maxval - 15` ]
     then
          # Delete it!
          echo $filename
          rm -f $LOCAL_ARC_PATH/$filename
     fi
done
echo ----------------------------------------------------------------
echo end archivemove.sh
echo ----------------------------------------------------------------
recover.sh
#!/bin/sh
echo ----------------------------------------------------------------
echo Traitement de la base $ORACLE_STANDBY
echo ----------------------------------------------------------------
sqlplus /nolog << EOF
connect sys/$ORACLE_STANDBY_SYSDBA_PASS@$ORACLE_STANDBY as sysdba
SELECT MAX(RECID) "Log id now" FROM V\$LOG_HISTORY;
RECOVER AUTOMATIC DATABASE UNTIL CANCEL USING BACKUP CONTROLFILE
CANCEL
SELECT MAX(RECID) "Log id after recover" FROM V\$LOG_HISTORY;
exit;
EOF
echo ----------------------------------------------------------------
echo End of recovery process
echo ----------------------------------------------------------------
getrecid.sql
connect sys/change_on_install@&1 as sysdba
SET HEAD OFF FEEDBACK OFF VERIFY OFF TERMOUT ON ECHO OFF TRIMSPOOL ON SERVEROUTPUT OFF
SPOOL recid.log
SELECT MAX(RECID) FROM V$LOG_HISTORY;
SPOOL OFF
exitHTH building your own scripts.
Yoann.

Physical Standby database Vs. Logical Standby database

I have few questions regarding capability of Logical Standby Database against Physical Standby database.
1. How efficient is Logical Standby database in terms of Physical Standby Database?? How both differ from each other and can I use Logical Standby Database for disaster Recovery?? Can It be use for recovering the failed Primary Instance?? If yes how efficient and reliable it is??
2. What are the known bugs and roadblocks for logical standby database on Oracle 10.2.0.1 on Soalris X86-64?
3.As logical standby database not going to replicate each and every schema of Primary database?? how is the change management effects to the logical standby from primary?? I mean there are some parameters and job that we create on primary how can it be transferred over to the logical standby??

1. How efficient is Logical Standby database in terms
of Physical Standby Database?? How both differ from
each other and can I use Logical Standby Database for
disaster Recovery?? Can It be use for recovering the
failed Primary Instance?? If yes how efficient and
reliable it is??I'm not sure what sort of "efficiency" you're talking about here...
Physical standby is just the old, tried and true application of archived logs to recover a database. Very solid, very old school.
Logical standby, on the other hand, is parsing the redo log, extracting logical change records, and applying them to the standby database. This obviously takes a bit more processing effort, it's newer technology, it doesn't have quite the level of support that physical standby does (i.e. certain data types are excluded), etc. You certainly can use it for failover, but it isn't quite as robust as a physical standby. Of course, this is getting better and better all the time and is definitely a focus of Oracle's development efforts.
On the other hand, logical standby systems can do things other than act as a warm standby. They can be open serving reports, for example. You can create additional structures (i.e. new materialized views) to support reporting. A physical standby is pretty much always going to be in managed recovery mode, so it cannot be queried.
2. What are the known bugs and roadblocks for logical
standby database on Oracle 10.2.0.1 on Soalris
X86-64?a) You'll want to do a Metalink search
b) If you're talking about a high-availability solution, why are you looking at a base release of the database? Why wouldn't you apply the latest patchset?
3.As logical standby database not going to replicate
each and every schema of Primary database?? how is
the change management effects to the logical standby
from primary?? I mean there are some parameters and
job that we create on primary how can it be
transferred over to the logical standby??I'm not sure I understand... Changes made to the primary generate redo. Oracle parses that redo, generates a LCR, and sends that to the standby database where that change record gets applied.
Justin

Error when logical standby database

Hii all,
First time i am creating logical standby database on oracle 10gR2 by oracle doc.
but When i try to create logical standby database it give error
DG 2011-07-11-09:44:24 0 2 755997031 Operation CTL_GET_STATUS cancelled during phase 2, error = ORA-16797
DG 2011-07-11-09:44:24 0 2 755997031 Operation CTL_GET_STATUS cancelled during phase 2, error = ORA-16797
DG 2011-07-11-09:45:24 0 2 0 RSM0: HEALTH CHECK ERROR: ORA-16797: database is not using a server parameter file.
when i try to create spfile from pfile it give error.
ORA-01078 failure in processing initialization parameters.
LRM-00123 invalid character number found in the input file.
Please help
Vaibhav Dixit.

Vaibhav Dixit wrote:
stan.__db_cache_size=432013312
stan.__java_pool_size=4194304
stan.__large_pool_size=8388608
stan.__shared_pool_size=163577856
stan.__streams_pool_size=0
*.audit_file_dest='D:\oracle\product\10.2.0/admin/stan/adump'
*.background_dump_dest='D:\oracle\product\10.2.0/admin/stan/bdump'
*.compatible='10.2.0.1.0'
*.control_files='D:\oracle\product\10.2.0/oradata/stan/stan05.ctl'
*.core_dump_dest='D:\oracle\product\10.2.0/admin/stan/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='stan'
*.DB_UNIQUE_NAME='stan'
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(prim,stan)'
*.DB_FILE_NAME_CONVERT='D:\oracle\product\10.2.0\oradata\prim\','D:\oracle\product\10.2.0\oradata\stan\'
*.LOG_FILE_NAME_CONVERT= ’D:\oracle\product\10.2.0\oradata\prim\’,’D:\oracle\product\10.2.0\oradata\stan\’,'D:\oracle\product\10.2.0\flash_recovery_area\prim\ONLINELOG','D:\oracle\product\10.2.0\flash_recovery_area\stan\ONLINELOG'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_DEST_1= 'LOCATION=D:\oracle\product\10.2.0\flash_recovery_area\stan\ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=stan'
*.LOG_ARCHIVE_DEST_2= 'SERVICE=prim LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=prim'
*.LOG_ARCHIVE_DEST_3= 'LOCATION=D:\oracle\product\10.2.0\flash_recovery_area\STAN2\ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=stan'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_3='ENABLE'
*.REMOTE_LOGIN_PASSWORDFILE='EXCLUSIVE'
*.LOG_ARCHIVE_MAX_PROCESSES=30
*.STANDBY_FILE_MANAGEMENT='AUTO'
*.FAL_SERVER='prim'
*.FAL_CLIENT='stan'
*.db_recovery_file_dest_size=9390363648
*.dispatchers='(protocol=TCP)'
*.job_queue_processes=10
*.nls_territory='INDIA'
*.open_cursors=300
*.pga_aggregate_target=202375168
*.processes=150
*.sga_target=609222656
*.shared_servers=1
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='D:\oracle\product\10.2.0/admin/stan/udump'
*.undo_retention=3600
*.dg_broker_start='TRUE'from
'D:\oracle\product\10.2.0/admin/stan/udump'
please change or replace the forward slash with backward slash in all file locations
to
eg:- 'D:\oracle\product\10.2.0\admin\stan\udump'
and create a spfile from pfile.

Apply Patches on Oracle Database with Logical Standby Database

Here I am:
I got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.
I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?
1)Stop SQL apply
2)Apply patches on logical standby database
3)let the name server point to the backup site
4)Apply patches on the primary database
5)Start SQL apply
6)Let the name server point back to the production site
Thanks in advance.

Pl follow the steps in MOS Doc 437276.1 ( Upgrading Oracle Database with a Logical Standby Database In Place )
HTH
Srini

Number of standby databases in Oracle 11g

Hi ,
We could create maximum of 9 standby databases in Oracle 10g.
How many maximum number of standby databases can be created in Oracle 11g?
Regards
Barkhaa

You can search for the answer here: http://www.oracle.com/pls/db112/homepage

Creating a new schema in a Logical Standby Database

Hi All,
I am experimenting with logical standby databases for the purpose of reporting, and have not been able to create a new schema in the logical standby database - one of the key features of logical standbys.
I have setup primary and logical standby databases, and they seem to be running just fine - changes are moved from the primary to the standby and queries on the standby seem to run ok.
However, If I try to create a new schema on the logical standby, that does not exist on the primary, I get "ORA-01031: insufficient privileges" errors when I try to create new objects.
Show below are the steps I have taken to create the new schema on the logical standby. Any help would be greatly appreciated.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_new
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user new
2 identified by new
3 default tablespace ts_new
4 temporary tablespace temp
5 quota unlimited on ts_new
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to new
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to new
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to new
SYS@UATDR> select * from dba_sys_privs where grantee='NEW'
2 /
GRANTEE PRIVILEGE ADM
NEW CREATE ANY TABLE NO
NEW CREATE TABLE NO
NEW UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect new/new
Connected.
NEW@UATDR>
NEW@UATDR> -- prove ability to create tables
NEW@UATDR> create table new
2 (col1 number not null)
3 tablespace ts_new
4 /
create table new
ERROR at line 1:
ORA-01031: insufficient privileges
NEW@UATDR>
NEW@UATDR>

HI Daniel,
I appreciate your quick response.
My choice of name may not have been ideal, however changing new to another name - like gav - does not solve the problem.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_gav
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user gav
2 identified by gav
3 default tablespace ts_gav
4 temporary tablespace temp
5 quota unlimited on ts_gav
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to gav
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to gav
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to gav
SYS@UATDR> select * from dba_sys_privs where grantee='GAV'
2 /
GRANTEE PRIVILEGE ADM
GAV CREATE TABLE NO
GAV CREATE ANY TABLE NO
GAV UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect gav/gav
Connected.
GAV@UATDR>
GAV@UATDR> -- prove ability to create tables
GAV@UATDR> create table gav
2 (col1 number not null)
3 tablespace ts_gav
4 /
create table gav
ERROR at line 1:
ORA-01031: insufficient privileges
GAV@UATDR>

Create table on Logical Standby Database

Dear DBAs,
here is my situation;
1. My primary database (where the tables' owner is "ICC" having a DBA) is used for insert/update transactions.
2. The logical stdby DB (dataguard structure with MAX availability) is used to generate reports, after updating some tables owned by the same user "ICC". note that these tables are excluded from the replication.
3. The developers might need to create this kind of tables to generate another kind of reports.
The issue is that when the standby apply is enabled or disabled, the user ICC is not able to create a new table, it gives ORA-01031: insufficient privileges. note that it's not practical to ask the DBA to disable the "APPLY" at any table creation.
Do you have an idea about how to resolve.
My database is 10gR2 path.10.2.0.4.0 on Windows 2003
Thank you in advance

If you stop applying log on the logical standby you can easily create a table over there. See oracle docs. The following list shows >how to re-create a table and restart SQL Apply on that table:
>
Stop SQL Apply:
SQL> ALTER DATABASE STOP LOGICAL STANDBY APPLY;
Ensure no operations are being skipped for the table in question by querying the DBA_LOGSTDBY_SKIP view:
SQL> SELECT * FROM DBA_LOGSTDBY_SKIP;
ERROR STATEMENT_OPT OWNER NAME PROC
N SCHEMA_DDL HR EMPLOYEES
N DML HR EMPLOYEES
N SCHEMA_DDL OE TEST_ORDER
N DML OE TEST_ORDER
Because you already have skip rules associated with the table that you want to re-create on the logical standby >database, you must first delete those rules. You can accomplish that by calling the DBMS_LOGSTDBY.UNSKIP >procedure. For example:
SQL> EXECUTE DBMS_LOGSTDBY.UNSKIP(stmt => 'DML', -
schema_name => 'HR', - object_name => 'EMPLOYEES');SQL> EXECUTE DBMS_LOGSTDBY.UNSKIP(stmt >=> 'SCHEMA_DDL', -
schema_name => 'HR', - object_name => 'EMPLOYEES');
Re-create the table HR.EMPLOYEES with all its data in the logical standby database by using the >DBMS_LOGSTDBY.INSTANTIATE_TABLE procedure. For example:
SQL> EXECUTE DBMS_LOGSTDBY.INSTANTIATE_TABLE(shema_name => 'HR', -
object-_name => 'EMPLOYEES', -
dblink => 'BOSTON');
Start SQL Apply:
SQL> ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE;Regards.

Creating logical standby database

Hi all,
10.2.0.1
Following this link
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ls.htm
Where do i need to issue these statements:
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
SQL> ALTER DATABASE RECOVER TO LOGICAL STANDBY db_name;
on physical standby or primary database.
I issued the first stament on primary and second on physical standby .
IN the alert log of standby,i have the following entries.
Wed Jan 20 15:34:28 2010
Converting standby mount to primary mount.
Wed Jan 20 15:34:28 2010
ACTIVATE STANDBY: Complete - Database mounted as primary (treasury)
*** DBNEWID utility started ***
DBID will be changed from 306589979 to new DBID of 330710340 for database
.........................I am trying to create a logical standby database after creating a physical standby database.
It seems standby changed to primary which was not desired.
Thanks

Not tried myself, but you might want to have a look at this URL.
It appears to suggest that you need to change names of datafiles as well as value db_name explcitly on standby.

RMAN script problem to create logical standby database !

Dear Friends ,
I am using Oracle10g database . I want to create a logical standby database . I create two database :
Primary : orcl
standby : orclsby1
Every steps I followed successfully , but when I am going to create "standby database" from "primary database" using rman then I found the following error :
The script is below which I have to run in Primary (orcl) database :
Script :
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'orcl','orclsby1'
set db_unique_name='orclsby1'
set db_file_name_convert='/orcl/','/orclsby1/'
set log_file_name_convert='/orcl/','/orclsby1/'
set control_files='/u01/app/oracle/oradata/orclsby1.ctl'
set log_archive_max_processes='5'
set fal_client='orclsby1'
set fal_server='orcl'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(orcl,orclsby1)'
set log_archive_dest_1='service=orcl ASYNC
valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orcl'
Problem which I got :
[oracle@localhost DG]$ rman target sys/sys123@orcl auxiliary sys/sys123@orclsby1
Recovery Manager: Release 10.2.0.1.0 - Production on Mon Oct 19 15:58:17 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: ORCL (DBID=1227832857)
connected to auxiliary database: ORCLSBY1 (not mounted)
RMAN> @cr_phys_sby1.txt
RMAN> run {
2> allocate channel prmy1 type disk;
3> allocate channel prmy2 type disk;
4> allocate channel prmy3 type disk;
5> allocate channel prmy4 type disk;
6> allocate auxiliary channel stby type disk;
7> duplicate target database for standby from
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "from": expecting one of: "dorecover, db_file_name_convert, nofilenamecheck, ;"
RMAN-01007: at line 7 column 39 file: cr_phys_sby1.txt
I try to edit the above script using 'nofilenamecheck' 'dorecover' etc. , but cannot resolve the problem . Would u plz help me .... where the problem is .
Both databases are running on Oracle10g platform .
Waiting for ur kind reply .. ...

You need to:
- create a SPFILE manually for standby database
- use the RMAN command: DUPLICATE TARGET DATABASE FOR STANDBY
- remove all SPFILE statements from RMAN script.

Create an Object in Logical standby database in Oracle 10G

Similar Messages

Maybe you are looking for