Create and insert Dynpro

How can I create and insert a Dynpro in the initial screen of a R/3 program in order to show a long text just after a Selection-Screen that contains the input parameters of the program?

Hi Ruben
1. You can put a screen having a text editor control (CL_TEXTEDIT), or you can use wrapper functions "RH_SET_EDITOR", "RH_GET_EDITOR" if you have in your system.
2. You can use the function for displaying long texts of messages.
3. You can write each line of your text to a table control and display that control without horizontal grid lines.
These are just the ones I remember firstly. Sorry for not giving exact names since I am not connected to a SAP system.
*--Serdar

Similar Messages

Drop, create and insert data into few intermediate tables

Hi All,
I need to schedule a process to drop, create and insert data into few intermediate tables on a weekly basis. Here is what i need to do in the stored procedure, which can be scheduled weekly.
DROP TABLE TABLE_NAME1;
DROP TABLE TABLE_NAME2;
DROP TABLE TABLE_NAME3;
CREATE TABLE TABLE_NAME1
CREATE TABLE TABLE_NAME2
CREATE TABLE TABLE_NAME3
INSERT INTO TABLE_NAME1 SELECT ....;
INSERT INTO TABLE_NAME2 SELECT ....;
INSERT INTO TABLE_NAME3 SELECT ....;
Any suggestions, examples or code on how to accomplish this task would be very helpful. Any question pls let me know.
Thanks in advance.

I am using the intermediate tables in an extract process. The idea was that the table would be created prior to calling the extract procedure and once the data written to the intermediate table had been processed the table would be dropped. This would be repeated each time the extract process is run. From a DBA's point or view, would it be better to just leave the table on the database and truncate it after each run or is removing it entirely best?

By using Inspector, i found the way to create and insert a scrolldown list ; however the list has to be created from inserting each line at a time; what i am looking for is a way of creating a scrolldown large(30 to 100 lines) list.

By using inspector, i found a way to create and insert a scrolldown list (*) in a cell ; however it can only be done one line at a time .what i am looking for is to create a bigger scrolldown list ( from 30 to 100 lines ) and in excel we can do it by copy and paste from an other doc...there must be a way with Numbers !!! any ideas ?
(*)...go to inspector/4th icon to he left/format/local menu/and then input the list one by one...and it creates a scrolldown list where you cursor was located in numbers.
please help....

If you need to use this kind of objects, my guess is that it would be better to use an other application like libreOffice.
At an user request, I wrote an AppleScript grabbing the list from a table embedded in the Numbers document.
Here is an enhanced version.
--{code}
--[SCRIPT fake-scrolldown-list]
Enregistrer le script en tant que Script : fake-scrolldown-list.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dans une table d'un document Numbers.
Aller au menu Scripts , choisir Numbers puis choisir “fake-scrolldown-list”
Le script extrait la liste d'articles de la table « la_liste » de la feuille contenant la table ci-dessus.
Il demande de choisir un article puis dépose celui-ci dans la cellule sélectionnée.
ATTENTION : À la demande d'un utilisateur, Le script utilise un nom de table localisé.
Je n'aime pas cela parce que de ce fait, lorsque le script est utilisé sur un système Français,
il requiert une table nommée "la_liste" mais lorsqu'il est utilisé sur un système Anglais il requiert la table "the_list".
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: fake-scrolldown-list.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell in a table of a Numbers document.
Go to the Scripts Menu, choose Numbers, then choose “fake-scrolldown-list”
The script extract the list of allowed items from the table “the_list” which must sit in the same sheet that the table embedding the selected cell.
It urge to choose an item then insert it in the selected cell.
CAUTION : I use different names for the required table according to the language in use on user request.
I dislike this feature because a document built by a French user sent to an English one will fail.
On the French system the script ask for the table "la_liste" but it ask for the table "the_list" on an English system.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/31
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2, myListe, maybe
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName
Extract the list of allowed values from the dedicated table *)
                    if my parleAnglais() then
                              "the_list"
                    else
                              "la_liste"
                    end if
                    tell table result
                              set myListe to value of every cell of column 1
                    end tell
                    set maybe to choose from list myListe
If we select the Cancel button, exit silently *)
                    if maybe is false then error number -128
Fill the selected cell with the choosed value *)
                    tell table tName
                              set value of cell rowNum1 of column colNum1 to (item 1 of maybe as text)
                    end tell
          end tell -- Numbers…
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2
          tell application "Numbers" to tell document 1
                    set d_Name to its name
                    set s_Name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_Name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_Name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if
                    end if
                    tell sheet s_Name to tell (first table where selection range is not missing value)
                              tell selection range
                                        set {top_left, bottom_right} to {name of first cell, name of last cell}
                              end tell
                              set t_Name to its name
                              tell cell top_left to set {row_Num1, col_Num1} to {address of its row, address of its column}
                              if top_left is bottom_right then
                                        set {row_Num2, col_Num2} to {row_Num1, col_Num1}
                              else
                                        tell cell bottom_right to set {row_Num2, col_Num2} to {address of its row, address of its column}
                              end if
                    end tell -- sheet…
                    return {d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2}
          end tell -- Numbers
end get_SelParams
--=====
on parleAnglais()
          local z
          try
                    tell application "Numbers" to set z to localized string "Cancel"
          on error
                    set z to "Cancel"
          end try
          return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
--{code}
Yvan KOENIG (VALLAURIS, France) samedi 31 décembre 2011
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios

How to create and insert muliple PDF pages to a single file

Greeting to everyone.
I use Acrobat 8 Standard to create PDF files, usually by PRINTING TO PDF from a CAD file(Vectorworks) or web pages on the net.
I know how to create single pages and I know how to combine them into a single PDF file by using the Document - Insert Pages command.
My question is: When creating a PDF file(e.g from my CAD program), can I print and insert instantly, rather than going through 2 steps.
Thank you in advance for your suggestions.
Sidug

No. Future questions concerning Acrobat belongs in the Acrobat forum.
This forum is for dealing with Reader issues. Users of free Reader
aren't that familiar with the commercial Acrobat Standard, Pro or
Extended programs.
Mike

Create and insert into temporary table

Dear all,
I want to create an temporary table and insert data from select statement and order data by field in that table, at the end i want to drop temporary table.
CURSOR rob_twin
IS
SELECT t.tarj, s.b24, date, status, fii, acnt, mbr, pviv, type
FROM
p6.tarj t
p6.stb24 s
p6.cuet c
WHERE .......
--now I want to create table and insert above data (from cursor rob_twin)
--after that I need to order data by t.tary from new table
--finally I want to drop this table
Thank you for your help.
Regards,
Robert

The point is in Oracle you do not create the temporary table at run-time, use it, and drop it again.
But you can create a GTT (Global Temporary Table) once and then it stays in the data dictionary, just like a normal table. The "temporary" part is simply that the data is temporary, can only be seen in this one session, and will go away either on commit or when the session ends.
So first you create a global temporary table with the columns you wish. Using either ON COMMIT DELETE ROWS or ON COMMIT PRESERVE ROWS you decide whether data in this GTT should survive across transactions or not.
Your logic could then be to populate this GTT with data from your remote database using INSERT INTO gtt_table SELECT ... FROM ...@dblink
Then work with that data in the GTT as you would with any normal local table
And finally either you simply commit your transaction and the data in the GTT goes away (if you did ON COMMIT DELETE ROWS), or you just DELETE gtt_table.
You do not continually create and drop a GTT. The table definition is permanent - it is only the data that is temporary.
Edit:
PS: As Karthick stated above - for almost any usual purposes it is likely to be possible to solve the problem without having to use GTT's. Usually even with db_links it can be done with suitable SQL and joins without having to use a GTT. But if that turns out to be one of those rare occasions where that is hard - then the above is the way to go ;-)
Edited by: Kim Berg Hansen on Sep 19, 2011 1:38 PM

Create and insert into table from Oracle to MS SQL server.

Hello,
Oracle Database 11g and Red hat 5
I have a very different kind of issue. I am handling the ORACLE db(remote db with all the important data). On the other side their is a MS SQL server db(local db with some testing data in it). All the users will access the ORACLE db for the actual processing but for sometime they need to apply some of their own concepts. So they will transfer the data from ORACLE to MS sql server.
I want to create a code in ORACLE db like a procedure , which will create a table in MS sql server , insert data into it,Also create some metadata table to keep some of my table's info on MS SQL serve db,If the table is present it should append the data, .... like many things ...
Overall my question is , how can i write a code to make these operation on a remote db, that to these operations are DDL and on MS SQL Server(Non-Oracle) ???
Please guide me with some ideas or solutions ...
Also provide if you have some good links to study ...
thanks in advance.

I'm not sure why you never visit http://tahiti.oracle.com prior to asking any question. Is it forbidden in your locale? Are you afraid of it? Will your salary be decreased when you visit the documentation?
http://www.oracle.com/pls/db111/search?word=sql+server&partno=
should provide sufficient information.
Your doc question must be considered a violation of Forum Etiquette and an abuse of this forum.
Sybrand Bakker
Senior Oracle DBA

Business Catalyst Help | Create and insert a form

This question was posted in response to the following article: http://helpx.adobe.com/business-catalyst/using/create-insert-form.html

I want to ask also if the opt-in forms in business catalyst can be embedded on a different website that's not hosted in BC. Like other email clients (mailchimp, aweber etc.) you can embed their forms to any website.
Is this possible for the BC email marketing forms?

Need suggestion on PLSQL Create and EXECUTE IMMEDIATE

Most of you already know plsql doesn't like create table, so we have to use EXECUTE IMMEDIATE for creating table. What if I want to see if the table exist, if not then create the table, later I will insert data into that table.
My problem is it returned me the error saying I am try to insert into a non existing table when trying to compile my code. I think plsql doesn't pick up the execute statement.
what I did is, both create and insert are executed by using EXECUTE IMMEDIATE. Anyone have such experience before and willing to share your knowledge?
PS: I am having same problem for creating sequence as well.

I think plsql doesn't pick up the execute statement.Since it is a runtime instruction, it will pick it up at runtime. but to be able to run, it needs to compile the code and in order to compile (so it can run) the code it needs that table/sequence you are referencing to exist already. So, you need to run the code to get the table and run needs to compile the code and compile needs the table to compile. can't go from here to there when you try to mix dynamic sql with static sql on the same object within the same program unit (or dependent units).

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

How to create a table with datatype blob and insert a pdf file (ravi)

how to create a table with datatype blob and insert a pdf file,
give me the explain asap
1.create the table?
2.insert the pdffiles into tables?
3.how to view the files?
Thanks & Regards
ravikumar.k
Edited by: 895044 on Dec 5, 2011 2:55 AM

895044 wrote:
how to create a table with datatype blob and insert a pdf file,
give me the explain asapPerhaps you should read...
{message:id=9360002}
especially point 2.
We're not just sitting here waiting to answer your question as quickly as possible for you.

Create tables insert something inside and then connect my application to db

thank you to be patient with me. ok since the beginning I think I have learned a lot with the people responses. so my database is mounted now. I used the cmd.exe command line. i have create an instance, a service, and the database. Now, I need to do two things:create tables inside of my database and insert something inside but I only have the sql script (I will add it at the end of the thread).it is just a part of my huge script.. but this cript can not be open with the command line. So I want to know if you could help me change some stuff inside in the aim to run this script with the command line.that's the first point
secondly, I have an application named lifetrack. i want to connect this application with my database. so how can I change my settings file to be able to do that?(I will add the settings file I have at the end.It is the one I use for sql server). thanks a lot.I'm a french student so I try my best to answer you in a good english. and believe me if I have the exact way to create table,insert something inside like indicate in the part of my script and connect an application to the database you will never see my thread again. thank you
1) sql script to create tables
CREATE TABLE [admin_table] (
     [Can_highlight] [float] NULL ,
     [User_name] [nvarchar] (30) COLLATE Latin1_General_CI_AS NULL ,
     [User_passwd] [nvarchar] (10) COLLATE Latin1_General_CI_AS NULL ,
     [User_group] [nvarchar] (30) COLLATE Latin1_General_CI_AS NULL ,
     [Can_consolidate] [smallint] NULL ,
     [Can_edit_autorpt] [smallint] NULL ,
     [Can_edit_disturbance] [smallint] NULL
) ON [PRIMARY]
GO
INSERT INTO [admin_table] ([Can_highlight],[User_name],[User_passwd],[User_group],[Can_consolidate],[Can_edit_autorpt],[Can_edit_disturbance])
     VALUES (1.0,'A Andrews','A','both',0,0,1)
GO
2) sql server settings file
' NOTES:
' ======
' The parameters in this file are used to specify the following configuration features for the system
' 1. the plant profile
' 2. the default database as well as the available searchable databases
' 3. the paths for accessing particular files used or generated by the system
' The Panels Configuration Mode has either of two values: "Embedded" or "External". It is a setting that determines
' whether the system loads configuration data for the sections of subjects buttons, which are already embedded
' within it, or whether it loads them from the external file:
' "Lifetrack Subjects Panel Configuration.dat"
' The System Database is an index value (zero-based) that determines which of the listed available databases
' is the main active one. In the DATABASES section, the parameters in each comma separated string
' designate the following (in this order):
' DB Index, DB Name, DB Type, DB Filepath, Server Name, Username, Password
PLANT SUBJECTS PANEL:
Panels Configuration Mode: Embedded
DATABASES:
System Database: 0
Available Databases: 1
0,abc_plant,SQL-Server,SQLSERVER_DATABASE,(local),sa,password
FOLDERS:
Saved_Log_Folder: .\
Saved_NOB_Folder: .\
Saved_Log&NOB_Together_Folder: .\
MICROSOFT OFFICE PATHNAME:
Pathname: C:\Program Files\Microsoft Office\Office11\

Yet another thread and yet another cut & paste job.

Created a pdf from a word-file and inserted formfields. The fields works in other pdf-readers(nitro,reader etc), but not in adobe reader and acrobat. Please help.

Hi,
I have created a pdf from a word-file and inserted formfields for a work related file. I've used nitro pro to create the formfield. They works in nitro, reader, foxit etc. but not adobe reader. From page 3 and out, the font wont show when writing in a formfield. Some formfield doesnt even show.
Please help me fix this (hopefully before the presentation at work friday) :-)
File in question: Dropbox - Byggeplassperm_bico_prosjektledelse_2.pdf
Kind regards
Tobias

Agreed. Adobe makes no claims that their Reader will work properly with forms made from third party software.

Using Pages, I have created a document and inserted a Table for use in logging an inventaory. When I came to print this off however the lines for the table were missing but the text was in the Table format, weird! How do I print the Table?

Using Pages, I have created a document and inserted a Table for use logging an inventory. When I came to print this document the lines and boarders of the Table feature did not print however the text did print in the table format. How do I get the lines and boarders to print also?

Using Pages, I have created a document and inserted a Table for use logging an inventory. When I came to print this document the lines and boarders of the Table feature did not print however the text did print in the table format. How do I get the lines and boarders to print also?

What is the best way to create E-Flyers and insert to Microsoft Outlook??

What is the best way to create E-Flyers and insert to Microsoft Outlook??

http://kb.mailchimp.com/article/how-to-code-html-emails
Once created, the HTML document cab be placed in the Stationery folder.
On a PC it's here.
"C:\Program Files\Common Files\Microsoft Shared\Stationery"

Is it possible to create an action to copy channel name text and insert into channel in CS5?

I am a screen printer and I print my separations from Photoshop. I routinely work with multi channel files or RGB files with additional spot color channels. I have created actions to place my registration marks, re-size images, etc to get ready to print but I manually have to create the text labels for each screen if they are missing from the original artwork.
The files I work with have channels named as "Base White, Red, Green, 284 Blue" etc indicating the ink color. What i would like to be able to do is click an action that would copy the text from the channel name and insert it into a separate or each/all channels near the top of the file so that when I print each positive it has a corresponding label for ink color.
I am not sure if this is even possible, and I am limited on my knowledge when it comes to actions and have pretty much got lucky in the past getting them to do what I want without unnecessary steps.
On my registration target action it creates a new channel with each individual reg mark then combines them into one separate channel in which I just copy the contents and select all the ink channels and fill with black to make them appear, i'm happy with the steps it takes as it isn't too much trouble and if this could do the same with labels I would be happy with that.
Thanks in advance!

What i would like to be able to do is click an action that would copy the text from the channel name and insert it into a separate or each/all channels near the top of the file so that when I print each positive it has a corresponding label for ink color.
Actions are, as far as I can tell, plainly incapable of this, Scripts on the other hand are not.
So you could try asking for help over at
http://forums.adobe.com/community/photoshop/photoshop_scripting?view=discussions
or
http://ps-scripts.com/bb/viewforum.php?f=9&sid=353cb093927c497650e802701e6fff40

Create and insert Dynpro

Similar Messages

Maybe you are looking for