Create base dn using JNDI...
Hi
I want to create the base dn for OpenDJ LDAP using JNDI below is the code i am using for the same but it is thorwing me the error could any body help me to tell me where exactly i am doing wrong .
public static String ldapUri = "ldap://169.144.104.75:389";
public static String admindn = "cn=Directory Manager";
public static String admincred = "redhat";
public static void main(String args[]){
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.PROVIDER_URL, ldapUri);
env.put( Context.SECURITY_PRINCIPAL, admindn );
env.put( Context.SECURITY_CREDENTIALS, admincred );
try {
DirContext ctx = new InitialDirContext(env);
Attributes attrs = new BasicAttributes(true);
Attribute objclass = new BasicAttribute("objectclass");
objclass.add("top");
objclass.add("domain");
objclass.add("ds-cfg-branch");
attrs.put(objclass);
attrs.put("dn","ds-cfg-backend-id=userRoot,cn=Backends,cn=config");
ctx.createSubcontext("dc=naren1,dc=naren1",attrs);
ctx.close();
The error is am getting is
javax.naming.NameNotFoundException: [LDAP: error code 32 - The provided entry dc=naren1,dc=naren1 cannot be added because its suffix is not defined as one of the suffixes within the Directory Server]; remaining name 'dc=naren1,dc=naren1'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3057)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2978)
I want to create the base dn on the OpenDJ and i have used the above mentioned code to create the basedn .
I am the confing file where this entry should be created
dn: ds-cfg-backend-id=userRoot,cn=Backends,cn=config
objectClass: ds-cfg-backend
objectClass: top
objectClass: ds-cfg-local-db-backend
ds-cfg-preload-time-limit: 0 seconds
ds-cfg-compact-encoding: true
ds-cfg-db-checkpointer-bytes-interval: 20 megabytes
ds-cfg-db-logging-level: CONFIG
ds-cfg-db-checkpointer-wakeup-interval: 30 seconds
ds-cfg-disk-full-threshold: 20 megabytes
ds-cfg-db-evictor-keep-alive: 600 seconds
ds-cfg-disk-low-threshold: 100 megabytes
ds-cfg-db-directory: db
ds-cfg-base-dn: dc=com
ds-cfg-base-dn: dc=ex,dc=com1
ds-cfg-base-dn: dc=exam,dc=com2
I have also read one artical on the same http://stackoverflow.com/questions/8977946/how-to-create-new-base-dn-using-jndi
But unable to find the error . If any body can help who had worked on to create the base dn on LDAP.
Similar Messages
-
how use jndi to create a organization and add a user to it¡£THANKS£¡
ÈçºÎ´´½¨Ò»¸ö×éÖ¯µ¥Î»,²¢½«Ò»¸öÓû§Ìí¼Ó½øËü¡£Ð»Ð»£¡Hi,
The command above about creating a group only works for the root site of the site collection, because the scope of the user group is site collection level, these groups
can be used in all the sites in this site collection.
With the existing groups in the root site, we can add users into them and grant specific permissions of a specific sub site to these groups.
Here is a demo about how to assign permission to a group using Client Object Model(though in C#) for your reference:
http://www.c-sharpcorner.com/UploadFile/54db21/set-permission-to-group-in-sharepoint-2010-programmatically/
Best regards,
Patrick
Patrick Liang
TechNet Community Support -
Create durable subscribers, JMSAdapter JNDI and DBAdapter JNDI using WLST
Hi All,
I have developed some WLST scripts to create new JMS servers, JMS modules which includes queues, topics and connection factories, data sources, etc.
I can successfully create topics using WLST but I cannot see any option to create durable subscribers using WLST. Also, I can create JMS server JNDIs along with its modules but I am unable to create JMSAdapter JNDI ( under Deployments ) using WLST.
Can anyone please help me out?
Thanks in advance,
-KaranHi,
I have the same problem, and when I try to record it. The py file contains nothing.
I know sometime weblogic server doesn't record, such as outbound connection factory. I guess durable Subscribers is another one.
Anyone know know to do this?
Cheers,
Tim -
Querying deleted objects container in Active Directory using JNDI
Hi,
I am trying to query deleted objects container using JNDI which fails with error 64.
Has anyone seen this or knows how to query AD using binary data in JNDI.
Seems to me there is some problem with the search base.
search base: <GUID=18E2EA80684F11D2B9AA00C04F79F805,dc=engserver,dc=com>.
filter: objectclass=*
search scope: subtree
This is the error:
Search example failed.
javax.naming.InvalidNameException: <GUID=18E2EA80684F11D2B9AA00C04F79F805,dc=eng
server,dc=com>: [LDAP: error code 64 - 00000057: LdapErr: DSID-0C090563, comment
: Error processing name, data 0, v893 ]; remaining name '<GUID=18E2EA80684F11D2B
9AA00C04F79F805,dc=engserver,dc=com>'
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2802)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2616)
at com.sun.jndi.ldap.LdapCtx.searchAux(LdapCtx.java:1744)
at com.sun.jndi.ldap.LdapCtx.c_search(LdapCtx.java:1667)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_search(ComponentDirCon
text.java:368)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCom
positeDirContext.java:328)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCom
positeDirContext.java:313)
at javax.naming.directory.InitialDirContext.search(InitialDirContext.jav
a:245)
at jSearch.main(jSearch.java, Compiled Code)
Thanks,
ChetanI thought I had posted one of these. How remiss of me !/**
* deleted.java
* 5 July 2001
* Sample JNDI application to search for deleted objects
* Modified December 2004 to add Win2K3 lastKnownParent
import java.util.Hashtable;
import javax.naming.*;
import javax.naming.ldap.*;
import javax.naming.directory.*;
import com.sun.jndi.ldap.ctl.*;
class DeletedControl implements Control {
public byte[] getEncodedValue() {
return new byte[] {};
public String getID() {
return "1.2.840.113556.1.4.417";
public boolean isCritical() {
return true;
public class deleted {
public static void main (String[] args) {
Hashtable env = new Hashtable();
String adminName = "CN=Administrator,CN=Users,DC=ANTIPODES,DC=COM";
String adminPassword = "XXXXXX";
String ldapURL = "ldap://mydc.antipodes.com:389";
env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
//set security credentials, note using simple cleartext authentication
env.put(Context.SECURITY_AUTHENTICATION,"simple");
env.put(Context.SECURITY_PRINCIPAL,adminName);
env.put(Context.SECURITY_CREDENTIALS,adminPassword);
//connect to my domain controller
env.put(Context.PROVIDER_URL,ldapURL);
try {
//Create the initial directory context
LdapContext ctx = new InitialLdapContext(env,null);
//Create the search controls
SearchControls searchCtls = new SearchControls();
//Specify the attributes to return
String returnedAtts[]={"distinguishedName","lastKnownParent"};
searchCtls.setReturningAttributes(returnedAtts);
//Specify the search scope
searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
//specify the LDAP search filter
String searchFilter = "(&(objectClass=user)(isDeleted=TRUE))";
//Specify the Base for the search
String searchBase = "DC=antipodes,DC=com";
//initialize counter to total the results
int totalResults = 0;
//specify the Deleted control
Control[] rqstCtls = new Control[] {new DeletedControl()};
ctx.setRequestControls(rqstCtls);
//Search for objects using the filter
NamingEnumeration answer = ctx.search(searchBase, searchFilter, searchCtls);
//Loop through the search results
while (answer.hasMoreElements()) {
SearchResult sr = (SearchResult)answer.next();
totalResults++;
System.out.println(totalResults + ". " + sr.getName().toString());
// Print out some of the attributes, catch the exception if the attributes have no values
Attributes attrs = sr.getAttributes();
if (attrs != null) {
try {
for (NamingEnumeration ae = attrs.getAll();ae.hasMore();) {
Attribute attr = (Attribute)ae.next();
System.out.println("Attribute: " + attr.getID());
for (NamingEnumeration e = attr.getAll();e.hasMore();System.out.println(" " + e.next().toString()));
catch (NullPointerException e) {
System.err.println("Problem listing attributes: " + e);
System.out.println("Deleted objects: " + totalResults);
ctx.close();
catch (NamingException e) {
System.err.println("Problem searching directory: " + e);
} -
Configure j2ee to support oracle9 database using jndi
how to configure j2ee1.3.1 to support access to oracle9 data base using jndi
i'm using a java bean to access an oracle9 data base,this snippet is written in the bean:
public connexionBD() Throws SQLException{
String dbName "java:com/env/jdbc/connexionBD";
DataSource ds=(DataSource)InitialContext().lookup(dbName);
Connection con =ds.getConnection("system","manager");
when i try to access the .jsp page that uses this javabeans the SQLException is thrown
I think it's a server configuration problem.
Knowing that the classpath and .jar files are configured, Can you help me resolve this problem
Thank youThese sections from the J2EE 1.4 platform sepc should hopefully help you understand java:comp/env.
J2EE.5.2.1.1 Access to Application Component s Environment An application component instance locates the environment naming context using the JNDI interfaces. An instance creates a javax.naming.InitialContext object by using the constructor with no arguments, and looks up the naming environment via the InitialContext under the name java:comp/env. The application component s environment entries are stored directly in the environment naming context, or in its direct or indirect subcontexts. Java Naming and Directory Interface" (JNDI) Naming Context 61 Environment entries have the Java programming language type declared by the Application Component Provider in the deployment descriptor. The following code example illustrates how an application component accesses its environment entries. public void setTaxInfo(int numberOfExemptions,...) throws InvalidNumberOfExemptionsException { ... // Obtain the application component s // environment naming context. Context initCtx = new InitialContext(); Context myEnv = (Context)initCtx.lookup( java:comp/env ); // Obtain the maximum number of tax exemptions // configured by the Deployer. Integer max = (Integer)myEnv.lookup( maxExemptions ); // Obtain the minimum number of tax exemptions // configured by the Deployer. Integer min = (Integer)myEnv.lookup( minExemptions ); // Use the environment entries to // customize business logic. if (numberOfExemptions > max.intValue() || numberOfExemptions < min.intValue()) throw new InvalidNumberOfExemptionsException(); // Get some more environment entries. These environment // entries are stored in subcontexts. String val1 = (String)myEnv.lookup( foo/name1 ); Boolean val2 = (Boolean)myEnv.lookup( foo/bar/name2 ); // The application component can also // lookup using full pathnames. Integer val3 = (Integer)initCtx.lookup( java:comp/env/name3 ); Integer val4 = (Integer)initCtx.lookup( java:comp/env/foo/name4 ); ... }
J2EE.5.2.4 J2EE Product Provider s Responsibilities The J2EE Product Provider has the following responsibilities: NAMING 64 " Provide a deployment tool that allows the Deployer to set and modify the values of the application component s environment entries. " Implement the java:comp/env environment naming context, and provide it to the application component instances at runtime. The naming context must include all the environment entries declared by the Application Component Provider, with their values supplied in the deployment descriptor or set by the Deployer. The environment naming context must allow the Deployer to create subcontexts if they are needed by an application component. -
Error while creating a material using Bapi_material_savedata
Hi,
there is an error encountered while creating a material using BAPI_MATERIAL_SAVEDATA..
The Error description is " Material description is not transfered " even after supplying the Material description and other mandatory field information like industrial sector, material type ,basic view indicator,Base UOM,Base UOM ISO code.
Please let me know the solution, if you know.Hi,
Please search the SCN for the answers
https://www.sdn.sap.com/irj/scn/advancedsearch?query=errorinBAPI_MATERIAL_SAVEDATA+&cat=sdn_all -
How to create a report using XML data source from Crystal Report Designer
Hi,
Iu2019m having Crystal Report Designer XI R2 SP4. Iu2019m trying to create a report using XML data source stored on disk. This is a customer order report and the xml is structured in such a way that it has an order details header part (master) and then it has several order lines (detail). One order line can have several order line characteristics (detail-detail). So what I need to know is now I can design this layout from the designer. If this was done using views I can do it with sub-reports but using xml data this seems to be different. Can you help me to design this layout? I have included the xml and xsd as well.
Thank you in advance.
Regards,
Chanaka
XML
<?xml version="1.0" encoding="UTF-8"?>
<CUSTOMER_ORDER_CONF_REP_REQUEST xmlns:xsi="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep">
<CUSTOMER_ORDER_CONF_REP>
<ORDER_NO>D555809</ORDER_NO>
<PRINTED_DATE>2009-03-26T08:52:54</PRINTED_DATE>
<AUTHORIZE_NAME>Chanaka</AUTHORIZE_NAME>
<CUSTOMER_NO>CU-1473-INV</CUSTOMER_NO>
<CUST_NAME>Mr.Johan Matts</CUST_NAME>
<SHIP_ADDR_1>93,Main Street</SHIP_ADDR_1>
<SHIP_ADDR_2>Negambo Road</SHIP_ADDR_2>
<SHIP_ADDR_3>Watthala</SHIP_ADDR_3>
<SHIP_ADDR_4>SRI LANKA</SHIP_ADDR_4>
<BILL_ADDR_1>93,Main Street</BILL_ADDR_1>
<BILL_ADDR_2>Negambo Road</BILL_ADDR_2>
<BILL_ADDR_3>Watthala</BILL_ADDR_3>
<BILL_ADDR_4>SRI LANKA</BILL_ADDR_4>
<CUSTOMER_PO_NO>112984638</CUSTOMER_PO_NO>
<CUSTOMER_FAX>112984639</CUSTOMER_FAX>
<CUSTOMER_EMAIL>abcbababab</CUSTOMER_EMAIL>
<ORDER_LINES>
<ORDER_LINE>
<LINE_NO>1</LINE_NO>
<CUSTOMER_PART_NO>NW-IP11</CUSTOMER_PART_NO>
<CUSTOMER_PART_DESC>iPod</CUSTOMER_PART_DESC>
<SALE_UNIT_PRICE>1200</SALE_UNIT_PRICE>
<PRICE_TOTAL>1200</PRICE_TOTAL>
<DISCOUNT>0</DISCOUNT>
<PRICE_QTY>1</PRICE_QTY>
<ORDER_LINE_CHARACTERSTICS>
<CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ID xsi:nil="1"/>
<CHARACTERISTIC_VALUE xsi:nil="1"/>
</CHARACTERISTIC_ITEM>
</ORDER_LINE_CHARACTERSTICS>
</ORDER_LINE>
<ORDER_LINE>
<LINE_NO>2</LINE_NO>
<CUSTOMER_PART_NO>NW-IP24</CUSTOMER_PART_NO>
<CUSTOMER_PART_DESC>XGA Projector</CUSTOMER_PART_DESC>
<SALE_UNIT_PRICE>500</SALE_UNIT_PRICE>
<PRICE_TOTAL>1500</PRICE_TOTAL>
<DISCOUNT>0</DISCOUNT>
<PRICE_QTY>3</PRICE_QTY>
<ORDER_LINE_CHARACTERSTICS>
<CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
<CHARACTERISTIC_VALUE>Free Instalation</CHARACTERISTIC_VALUE>
</CHARACTERISTIC_ITEM>
</ORDER_LINE_CHARACTERSTICS>
</ORDER_LINE>
<ORDER_LINE>
<LINE_NO>3</LINE_NO>
<CUSTOMER_PART_NO>NW-IP02</CUSTOMER_PART_NO>
<CUSTOMER_PART_DESC>Sony DVD Player</CUSTOMER_PART_DESC>
<SALE_UNIT_PRICE>1000</SALE_UNIT_PRICE>
<PRICE_TOTAL>1000</PRICE_TOTAL>
<DISCOUNT>0</DISCOUNT>
<PRICE_QTY>1</PRICE_QTY>
<ORDER_LINE_CHARACTERSTICS>
<CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
<CHARACTERISTIC_VALUE>Free 5 DVDs</CHARACTERISTIC_VALUE>
</CHARACTERISTIC_ITEM>
</ORDER_LINE_CHARACTERSTICS>
</ORDER_LINE>
<ORDER_LINE>
<LINE_NO>4</LINE_NO>
<CUSTOMER_PART_NO>NW-IP99</CUSTOMER_PART_NO>
<CUSTOMER_PART_DESC>Flatscreen TV</CUSTOMER_PART_DESC>
<SALE_UNIT_PRICE>1500</SALE_UNIT_PRICE>
<PRICE_TOTAL>1350</PRICE_TOTAL>
<DISCOUNT>10</DISCOUNT>
<PRICE_QTY>1</PRICE_QTY>
<ORDER_LINE_CHARACTERSTICS>
<CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
<CHARACTERISTIC_VALUE>Free Delivery</CHARACTERISTIC_VALUE>
</CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
<CHARACTERISTIC_VALUE>1 year additional warranty</CHARACTERISTIC_VALUE>
</CHARACTERISTIC_ITEM>
</ORDER_LINE_CHARACTERSTICS>
</ORDER_LINE>
<ORDER_LINE>
<LINE_NO>5</LINE_NO>
<CUSTOMER_PART_NO>NW-IP56</CUSTOMER_PART_NO>
<CUSTOMER_PART_DESC>Sony MP3 Player</CUSTOMER_PART_DESC>
<SALE_UNIT_PRICE>200</SALE_UNIT_PRICE>
<PRICE_TOTAL>400</PRICE_TOTAL>
<DISCOUNT>0</DISCOUNT>
<PRICE_QTY>2</PRICE_QTY>
<ORDER_LINE_CHARACTERSTICS>
<CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
<CHARACTERISTIC_VALUE>Free carry belt</CHARACTERISTIC_VALUE>
</CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
<CHARACTERISTIC_VALUE>Free promotional 4GB memory bar</CHARACTERISTIC_VALUE>
</CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ITEM>
<CHARACTERISTIC_ID>3</CHARACTERISTIC_ID>
<CHARACTERISTIC_VALUE>No warranty on memory bar</CHARACTERISTIC_VALUE>
</CHARACTERISTIC_ITEM>
</ORDER_LINE_CHARACTERSTICS>
</ORDER_LINE>
</ORDER_LINES>
</CUSTOMER_ORDER_CONF_REP>
</CUSTOMER_ORDER_CONF_REP_REQUEST>
XSD
<?xml version="1.0" encoding="UTF-8"?>
<?report module="ORDER" package="CUSTOMER_ORDER_CONF_REP" ?>
<xs:schema targetNamespace="urn:ifsworld-com:customer_order_conf_rep" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep" elementFormDefault="qualified" attributeFormDefault="unqualified">
<xs:element name="CUSTOMER_ORDER_CONF_REP_REQUEST">
<xs:complexType>
<xs:all minOccurs="1" maxOccurs="1">
<xs:element name="CUSTOMER_ORDER_CONF_REP">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="50">
<xs:element name="ORDER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="PRINTED_DATE" type="xs:dateTime" nillable="true" minOccurs="0"/>
<xs:element name="AUTHORIZE_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PO_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUST_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_FAX" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_EMAIL" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINES" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="ORDER_LINE">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="39">
<xs:element name="LINE_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SALE_UNIT_PRICE" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_TOTAL" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="DISCOUNT" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_QTY" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="CUSTOMER_PART_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PART_DESC" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINE_CHARACTERSTICS" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="CHARACTERISTIC_ITEM">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="6">
<xs:element name="CHARACTERISTIC_ID" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CHARACTERISTIC_VALUE" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:all>
</xs:complexType>
</xs:element>
</xs:schema>Hi Sourashree,
Thank you for the response and ideas you have given me so far. I can get the fetch the data from the data source without any problem. That is I do the following,
1. New Report
2. From Create New Connection-> XML
3. Provide the u201CLocal XML Fileu201D and have u201CSpecify Schema Fileu201D checked -> Next
4. Provide the u201CLocal Schema Fileu201D -> Finish
Then I can see the following under XML
+ CUSTOMER_ORDER_CONF_REP_REQUEST
CUSTOMER_ORDER_CONF_REP_REQUEST
CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES
CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS
CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
And from here if I add the following three I can get all the fields I need to the report
CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
Then I come to the Linking section. Here I canu2019t link anything. There is a common field called u201CInternal_IDu201D but I canu2019t link using it. So I get a message when I click Next. From here I add all the fields.
For this point onwards only I need help. How do I group, add fields and design the layout so I can get an report output as follows.
Date
Order number Authorized code
Customer No
Name
Phone
Fax email
Shipping address 1 Billing Address 1
Shipping address 2 Billing Address 2
Shipping address 3 Billing Address 3
Shipping address 4 Billing Address 4
Order Line 1 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026 LINE_NO CUSTOMER_PART_NO CUSTOMER_PART_DESC SALE_UNIT_PRICE PRICE_QTY DISCOUNT PRICE_TOTAL
Characteristic details belonging to Order line 1 CHARACTERISTIC_ID 1 CHARACTERISTIC_VALUE1
CHARACTERISTIC_ID 2 CHARACTERISTIC_VALUE2
CHARACTERISTIC_ID 3 CHARACTERISTIC_VALUE3
Order Line 2 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 2
Order Line 3 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 3
Order Line 4 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 4
Order Line 5 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 5
How can I achieve this kind of a layout using the give xml and xsd? Should I use grouping if so how should I do the grouping?
I have included the full xml and xsd in the first mail I posted but I canu2019t see it now. I can include that again if you want.
Regards,
Chanaka -
Passing a login and password while using JNDI for RT jobs
Why can we not pass a user name and password when using JNDI for Real Time jobs? Can it be passed in the URL line or somewhere else that I'm missing? This is frustrating as we actually have to connect using Anonymous with no password which opens up so many security holes that we simply can't go to production with this. Please advise.
you can set the login using the JNDI properties file and create the file in the classpath, but again the password will be in plain text
please file a case with Support I think this can be added to JMS adapter operation (user credentials) -
Hi ,
I am creating a POC for my project.Its using ATG and spring frameworks using RAD 6.first I have created ATG sample project in that same EAR file i created sample Spring project.Both are running in the same EAR.
I want to use spring classes from ATG components to use those methods.that is i should pass parameters to spring project methods and i should get the return value after executing those methods.
I heard that using JNDI look up I can get spring project class objects using that I can invoke spring project methods.
My requirement is two projects will be running in the same EAR.But one project will not be having information about other projects.both are independent from other.Using JNDI look up i need to invoke Spring project methods.
Please anyone help me how to do this.
I used java:comp/env/com/dao/EmpDAO to get instance of my class EmpDAO.But i am getting naming exception.Can anyone help me how to do this
Thanks in advance.If Tomcat is your servlet/JSP engine, they have a nice bit about how to do it:
http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html
MOD -
How to create a counter using Oracle SQL Developer?
Is there any way to create a counter using Oracle SQL Developer to create the below scenario. Meaning it will recorded down the name of user and ID and time and the date they login.
Library portal home statistics shows how many users (outside and within the campus) visit the library portal.
Page Access statistics is recorded on an hourly basis. Users may select the statistics by
yearly (statistics displayed by all months in the selected year)
monthly (statistics displayed by all days in the selected month)
daily (statistics displayed by all hours in the selected day)I'm giving here one basic post - hope this will solve your problem --
SQL>
SQL>
SQL> create table audit_info
2 (
3 usr varchar2(50),
4 log_time timestamp(6)
5 );
Table created.
SQL>
SQL>
SQL> create table err_log
2 (
3 log_cd varchar2(20),
4 log_desc varchar2(500)
5 );
Table created.
SQL>
SQL>
SQL> create or replace procedure ins_err(errcd in varchar2,
2 errnm in varchar2)
3 is
4 pragma autonomous_transaction;
5 begin
6 insert into err_log values(errcd,errnm);
7 commit;
8 end;
9 /
Procedure created.
SQL>
SQL>
SQL> create or replace procedure ins_aud(ud in varchar2,
2 unm in varchar2)
3 is
4 pragma autonomous_transaction;
5 begin
6 insert into audit_info values(ud,unm);
7 commit;
8 exception
9 when others then
10 ins_err(sqlcode,sqlerrm);
11 end;
12 /
Procedure created.
SQL>
SQL>
SQL>
SQL> create or replace trigger log_odsuser1
2 after logon on odsuser1.schema
3 begin
4 ins_aud('ODSUSER1',sysdate);
5 exception
6 when others then
7 ins_err(sqlcode,sqlerrm);
8 end;
9 /
Trigger created.
SQL>
SQL*Plus: Release 9.2.0.1.0 - Production on Tue Jun 12 12:21:09 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
SQL>
SQL>
SQL>
SQL> set serveroutput on
SQL>
SQL>
SQL> select * from audit_info;
USR
LOG_TIME
ODSUSER1
12-JUN-07 12.00.00.00000000 AMHope this will solve your purpose.
Regards.
Satyaki De. -
[urgent ]runtime error occured while creating the material using mm01
hai
am configure the ale program now . the problem is occured during the creating the material using mm01.
am using client 000 (sending system). and i want to send the material to the client 400(receiving system)
while am save the created material using t-code mm01 in client 000 . it depicts the error as
syntax error in program SAPLC140.
plz resolve this problem.
regards
surenderHi,
In MM01 transaction code u have a problem..normally u will go to mm01 screen to create the material..i thought the same error will occur...so call basis to rectify this problem..
Thank u,
Manjula Devi.D -
Problem with creating Connection pool and JNDI, driver is not detected
Hi,
I have an issue with creating Connection Pool and JNDI.
I'm using:
- JDK 1.6
- OS: Linux(ubuntu 8.10)
- Netbeans IDE 6.5.1
- Java EE 5.0
- Apache Tomcat 6.0.18 Its lib directory contains all necessary jar files for Oracle database driver
- Oracle 11g Enterprise
My problem is that the Oracle database driver is not detected when I want to create a pool (it works pretty well and is detected without any problem when I create ordinary connection by DriverManager)
Therefore after running:
InitialContext ic = new InitialContext();
Context context = (Context)ic.lookup("java:comp/env");
DataSource dataSource = (DataSource)context.lookup("jdbc/oracle11g");
Connection connection = dataSource.getConnection();and right after dataSource.getConnection() I have the following exception:
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot load JDBC driver class 'oracle.jdbc.OracleDriver'
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1136)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880)
at servlets.Servlet1.doPost(Servlet1.java:47)
at servlets.Servlet1.doGet(Servlet1.java:29)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at sun.misc.Launcher$ExtClassLoader.findClass(Launcher.java:229)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1130)
... 17 more
My application context file (context.xml) is:
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/WebApplication3">
<Resource auth="Container"
driverClassName="oracle.jdbc.OracleDriver"
maxActive="8"
maxIdle="4"
name="jdbc/oracle11g"
username="scott"
password="tiger"
type="javax.sql.DataSource"
url="jdbc:oracle:thin:@localhost:1521:database01" />
</Context>and my web.xml is:
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/oracle11g</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
...I found similar threads in different forums including sun, such as
http://forums.sun.com/thread.jspa?threadID=567630&start=0&tstart=0
http://forums.sun.com/thread.jspa?threadID=639243&tstart=0
http://forums.sun.com/thread.jspa?threadID=5312178&tstart=0
, but no solution.
As many suggest, I also tried to put context directly in the server.xml (instead of my application context) and referencing it by <ResourceLink /> inside my application context but it didn't work and instead it gave me the following message:
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create JDBC driver of class ' ' for connect URL 'null'
Has anyone succeeded in creating a connection pool with JNDI by using Tomcat 6 or higher ? If yes, could kindly explain about the applied method.
Regards,Hello again,
Finally I managed to run my application also with Tomcat 6.0.18. There was only two lines that had to be modified
in the context.xml file (the context of my application project and not server's)
Instead of writing
<Context antiJARLocking="true" path="/WebApplication2">
type="javax.sql.DataSource"
factory="org.apache.tomcat.dbcp.dbcp.BasicDataSourceFactory"
</Context>we had to write:
<Context antiJARLocking="true" path="/WebApplication2">
type="oracle.jdbc.pool.OracleDataSource"
factory="oracle.jdbc.pool.OracleDataSourceFactory"
</Context>- No modification was needed to be done at server level (niether server.xml nor server context.xml)
- I just added the ojdbc6.jar in $CATALINA_HOME/lib (I didn't even need to add it in WEB-INF/lib of my project)
- The servlet used to do the test was the same that I presented in my precedent post.
For those who have encountered my problem and are interested in the format of the web.xml and context.xml
with Tomcat 6.0, you can find them below:
Oracle server: Oracle 11g Enterprise
Tomcat server version: 6.0.18
Oracle driver: ojdbc.jar
IDE: Netbeans 6.5.1
The context.xml file of the web application
<?xml version="1.0" encoding="UTF-8"?>
<Context antiJARLocking="true" path="/WebApplication2">
<Resource name="jdbc/oracle11g"
type="oracle.jdbc.pool.OracleDataSource"
factory="oracle.jdbc.pool.OracleDataSourceFactory"
url="jdbc:oracle:thin:@localhost:1521:database01"
driverClassName="oracle.jdbc.OracleDriver"
userName="scott"
password="tiger"
auth="Container"
maxActive="100"
maxIdle="30"
maxWait="10000"
logAbandoned="true"
removeAbandoned="true"
removeAbandonedTimeout="60" />
</Context>The web.xml of my web application
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
<resource-ref>
<description>Oracle Database 11g DataSource</description>
<res-type>oracle.jdbc.pool.OracleDataSource</res-type>
<res-auth>Container</res-auth>
<res-ref-name>jdbc/oracle11g</res-ref-name>
</resource-ref>
<servlet>
<servlet-name>Servlet1</servlet-name>
<servlet-class>servlets.Servlet1</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Servlet1</servlet-name>
<url-pattern>/Servlet1</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>
30
</session-timeout>
</session-config>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
</web-app>Ok, now I'm happy as the original problem is completely solved
Regards -
Creating a Report Using a SharePoint List
I am using a SharePoint List that Named as 'Service Requests'. It has some fields with Date, Time, Status. The Date & Time will be entered. The Status as three values & those will be selected using a Drop Down List Box. The Statuses are 'In Progress,
Completed, In completed'.
I want to create a Report using this SharePoint List that include status with other fields in monthly basis. As an example I want the report about the Service Requests within the December month.
I also need to know how am I able to link this report to a Web Menu that in the SharePoint Site. Because there is a web menu in that SharePoint Site. I have not developed this site so I don't know the type of the web menu of this site.
I think someone can help me to solve these problems.
Regards,
ChiranthakaHi Chiranthaka,
According to your description, my understanding is that you want to create a report based on a SharePoint list.
I agree with Trevor’s and Mohammad’s suggestion to use SQL Server Reporting Service to create the report for SharePoint list.
You need to configure Reporting Services for SharePoint 2010 and then use it to create reports.
Here are two links with the detailed steps to create report using SSRS with SharePoint for you to refer:
http://aaclage.blogspot.in/2011/11/create-reports-with-sharepoint-2010-and.html
http://nikpatel.net/2010/06/11/step-by-step-consuming-sharepoint-2010-lists-data-in-the-ssrs-2008-r2-reports/
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
How to create Base Dimensions with MaxL and Text File?
Hi,
Doing a scratch rebuild of a cube every month. Don't want to have a 'dummy' outline with base dimensions to copy over every build. Instead want to build from text file somehow. Thus my plan is to: 1) Delete the existing app/db 2) Create a new blank app/db 3) Create the base dimensions in the outline via text file and 4) Build entire outline via a text file. I'm stuck on #3 how to get the 'base dimensions' built via text file. I need:
ACCOUNTS
PERIOD
VALUE
VIEWS
SCENARIO
CUSTOM4
YEAR
CUSTOM3
CUSTOM2
ENTITY
CUSTOM1
I see this MaxL, but it uses a 'rules file' and I never have built a rules file to create base dims so I'm confused if it's possible or not...
import database sample.basic dimensions
from data_file '/data/calcdat.txt'
using rules_file '/data/rulesfile.rul'
on error append to '/logs/dimbuild.log';We rebuild our Departments and Organization from an enterprise hierarchy master each week.
The way we implemented (what you call #3) was to not do #1 and #2, but to have a "destructive" load rule for each of these dimensions using a text file. (in the "Dimension Build Settings" for the load rule, select "Remove Unspecified" to make it destructive)
The text file just has the dimension name (parent) and any children we needed defined in a parent/child relationship. For instance
"Sales Departments" "0100-All Departments"
This essentially works the same as deleting the app because the destructive load rules will drop all the blocks of data that were unspecified.
Then we run our SQL load rule to build the rest of the dimensions from the Location Master.
We perform a level-0 export prior to this process, then reload the level-0 data and execute all the consolidation scripts to get the data back (now in a current enterprise defined hierarchy) -
How to use JNDI look up from a JSP
Hello,
I know I should not be doing this (writing the lookup code in a JSP) but have to do it for some reasons.
I am using this code in my JSP:
try
Context ctx = new InitialContext();
dataSource = (DataSource)ctx.lookup("jdbc/mybillingora");
conn = dataSource.getConnection();
statement = conn.createStatement();
catch(Exception excep)
Is this code enough for a JNDI look up?? When I use this code, I get an exception:
"javax.naming.NameNotFound exception:jdbc/mybillingora"
Do I need to do something else??
Why do we use :
Properties env = new Properties();
env.put(Context.INITIAL_CONTEXT_FACTORY,
"<some_context_factory>");
env.put(Context.PROVIDER_URL, PROVIDER_URL);
env.put(Context.SECURITY_PRINCIPAL, JNDI_USER);
env.put(Context.SECURITY_CREDENTIALS, JNDI_PWD);
InitialContext = new InitialDirContext(env);
where JNDI_USER is the userid If ACL is configured at the JNDI server
where JNDI_PWD is the password If ACL is configured at the JNDI server
Context.INITIAL_CONTEXT_FACTORY is the initial Context factory and depends on ur JNDI service provider.
PROVIDER_URL is the url of the JNDI server containing protocol/ip/port
do i need to use this??
would appreciate your help on this....
ThanksI am working on a pretty similar problem and posted my problem minute ago.
Include JNDI.jar from <Oracle_HOME>\jlib. (This is what I found in Oracle docs).
I presume you are also trying to create the Datasource using Datasource interface via JNDI rather than using Driver Manager.
Thanks
Mei
Maybe you are looking for
-
I have a PowerBook G4 that is about 5 years old. It was working fine yesterday and then all of a sudden nothing seemed to work. It will turn on normally, I can see my desktop, on the surface all appears as it should. But my dock has disappeared and n
-
Okay, when I open iTunes (11.0.2.26 Windows 7) and try to play songs in the library, I get the "missing files" message, with option to locate. I choose to locate, and it cannot find the song file. However, when I go to the library location (only i
-
Need Help with Firework HTML in Dreamweaver
I'm using dreamweaver 8 for a project. I want to seek council with someone. Basically my web page's tool bar is an image. I thought to do it this way because if I change the image i'd just have to change the new image to the old file name and everyth
-
How can I watch purchased movies on apple tv?
How can I watch purchased movies on apple tv? I recently purchased an apple tv and cannot play the movies I have bought on my itunes account? Can anyone help?
-
Hi, I am new bee in CRM. I am doing my first program in crm . Can any one explain me why we use CRMD_LINK table. Why we pass guid in guid_hi and get guid_set ? what is diffrent between them ? Help will be rewarded ... Regards Gurprit Bhatia