Passing a login and password while using JNDI  for RT jobs

Why can we not pass a user name and password when using JNDI for Real Time jobs?  Can it be passed in the URL line or somewhere else that I'm missing?  This is frustrating as we actually have to connect using Anonymous with no password which opens up so many security holes that we simply can't go to production with this.  Please advise.

you can set the login using the JNDI properties file and create the file in the classpath, but again the password will be in plain text
please file a case with Support I think this can be added to JMS adapter operation (user credentials)

Similar Messages

  • Is there a way to login to Iplanet 5.2 by using a URL that contains the login and password (without using the form) ?

    I would like to be able to login to Iplanet using a URL like this:
    http://server:port/<exec>?user=john&password=doe
    or like http://user:password@server:port/<some_params>
    I knew how to do it with SIMS 4, but with Iplanet 5.2 I just don't have a clue. Do you know how to do that?

    http://server:port/login.msc?user=john&password=doe
    This works for me.
    Regards,
    Niels

  • I have to use a recovery disk to fix my computer. Where does FF keep the login and passwords I use on a daily basis. I want to download and save them for reinstallation?

    I am about to use a recovery disk to reset my computer to it's original factory settings and operating system. I want to download and save all of my Firefox bookmarks, website logins & passwords for the websites.
    How can I do this and where is all the above located on my computer. I would like to copy them and then reinstall after the recovery disk operation is completed.

    Firefox needs 32-bit plugins, so you'll need to install 32-bit Java for Firefox.
    No, you can't change Firefox from 32-bt to 64-bit. There is a Nightly 64-bit version (alpha) of Firefox, but it is used only to test for regressions until development is resumed.

  • Printer is asking for an user acces code instead of windows login and password?

    I have been seeing the HP printers asking(LaserJet M4555 MFP, LaserJet 500 color MFP M575 etc) for user access code instead of windows login and password.
    One thing i have noticed  is that when this happens there is a slight change in the EWS page configuration at security -> access control.The device administrator tabe is unchecked as you can see below ehen this happens
    Have tried cold resetting the printer and restore facory settings but this does not works and some thimes it does works for a while but the issue is returing back.
    We do not need this access code promt instead we need the usual windows login and password that used be there originally.
    alsothis is how the settings look like after a cold reset somtimes when it does not  asks for user access code , the problem is cold rese does lways works and it reverts back ois original settings

    @munish259272 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Passing username and password while calling the simple HTTP API

    Hi,
    I want to execute a graph by calling the http api from a java code. However, this gives me a 401 unauthorized http error as I am not passing the username and password to the clover http url.
    The following is the format of the constructed url. - http://<host>:<port>/clover/simpleHttpApi/graph_run?sandbox=<sandboxname>&graphID=graph/Baseline.grf&verbose=FULL
    Can anyone suggest how to pass user credentials to this url.
    Thanks

    Brett,
    Thanks for the response.
    The idea is to run the baseline graph using the simple http api and get the run id of the job. Then I plan to call
    this url - http://<host>:<port>/clover/simpleHttpApi/graph_status?runID=1310924&returnType=STATUS_TEXT&waitForStatus=FINISHED_OK by passing the obtained run ID of the previous job dynamically to this url. This status has to be read and printed on the screen. Now all this is easy to write using java and executing the java class using the JAVA EXECUTE component of Integrator ETL 3.1. My only problem is how do I pass the user credentials.
    Thanks

  • Why can't I use the same login and password for apps and cloud

    I try to go on to face time and it asks for my login and password which works
    ok with the App Store but is not recognised when using face time or I cloud

    You can, if logged in using the same Apple ID for all.

  • When I enter a website, FireFox used to auto login and password. Now is does NOT. If I choose remember me check box, the website remembers me but I still have to enter a password. I think this is a problem created with website programming.

    The problem is with most websites but not all. When I try to login to this website to ask this question, I have recorded 3 logins. Only one works, but that is a different problem. The websites used to automatically login and suddenly don't. I believe the problem is a change in programming for the website programmers. I found a solution (not a viable one) previously here that is supposed to remember login and password through a laborious process, but that is really cumbersome and doesn't always work either. Today I cannot find that process to try it. I am trying to login to ATT website which was just changed.

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

  • Accessing a web service defined in XI with login and password

    Hello,
    I've configured a web service on XI and made it available. I want to use it from a NWDS portal object. Accessing the page needs authentication.
    If I use XMLSpy to make a request I get an enter user login/password screen. But I don't know where i should  tell the login and password in my NWDS request.
    I tried to add the stuff in the url like this http://user:pass@host:port/... without success
    Does anyone know what is to be made in order to let me access my web service ?
    In NDWS I get my service ...
    (Service) myservice = PortalRuntime.getRuntimeResources().getService("MY/Service");
    MyResult myResult = myservice.makeRequest()
    Thx,
    mejj

    Check out
    http://hcc.musc.edu/research/shared_resources/xml_complex_types_to_cf_structure_notes.cfm
    The last part of that link is .cfm - not sure why its getting
    cut off.

  • Do i need a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?

    after having my mbp upgraded  with new m.lion by apple tech service i noticed that applications like iphoto, garageband and imovie are gone
    researched online and was told that i had to acess the `purchase` via AppStore where it asks me to log in with Apple ID and password
    i used the usual admin login and password and didnt work, also on itunes and icloud the similar case
    do i need to register with a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?

    Just use the same Apple ID and password that you used to access this forum - that's your Apple ID.
    The user name and password on your computer has nothing to do with your Apple ID.
    Good luck,
    Clinton

  • How to pass user name and password in openConnection method ?

    Hi, Exports,
              I am trying to post data from applet to another application which is
              protected by network password.
              How to pass user name and password when I use openConnection method? In java
              doc, this method looks like do not accept these two parameters.
              Thanks
              ----- my code in applet ---------
              URL url = new URL("http://127.0.0.1/xml/index.cfm");
              URLConnection connection = url.openConnection();
              connection.setDoInput(true);
              connection.setDoOutput(true);
              connection.setUseCaches(false);
              connection.setAllowUserInteraction(false);
              DataOutputStream dos = new DataOutputStream(connection.getOutputStream());
              dos.writeBytes("POST " + path + " HTTP/1.0\r\n");
              dos.writeBytes("Referer: http://127.0.0.1/XML/index.cfm\r\n");
              dos.writeBytes("Content-Type:
              multipart/form-data;boundary=---------------------------7d0b414b04\r\n");
              dos.writeBytes("Host: "+host+":"+port+"\r\n");
              dos.writeBytes("Content-Length:" + buff.length()+"\r\n");
              dos.writeBytes("Connection: Keep-Alive\r\n\n");
              dos.writeBytes("-----------------------------7d0b414b04\r\nContent-Dispositi
              on: form-data;name=\"xmlDoc\"\r\n\r\n");
              dos.writeBytes(buff.toString());
              dos.writeBytes("\r\n-----------------------------7d0b414b04--\r\n");
              dos.close();
              

    you need to negotiate Authentication in ur applet code...
              For example:
              If u r using Form based auth u need to send Post a request with j_user_name &
              j_password to the action j_security_check. and when server returns back the
              cookie
              u need to hold it and pass that cookie to the each and every request made to the
              protected application.
              Basically u need to imitate the browser.
              regards
              aseem
              David wrote:
              > Hi, Exports,
              >
              > I am trying to post data from applet to another application which is
              > protected by network password.
              > How to pass user name and password when I use openConnection method? In java
              > doc, this method looks like do not accept these two parameters.
              >
              > Thanks
              >
              > ----- my code in applet ---------
              > URL url = new URL("http://127.0.0.1/xml/index.cfm");
              > URLConnection connection = url.openConnection();
              > connection.setDoInput(true);
              > connection.setDoOutput(true);
              > connection.setUseCaches(false);
              > connection.setAllowUserInteraction(false);
              > DataOutputStream dos = new DataOutputStream(connection.getOutputStream());
              > dos.writeBytes("POST " + path + " HTTP/1.0\r\n");
              > dos.writeBytes("Referer: http://127.0.0.1/XML/index.cfm\r\n");
              > dos.writeBytes("Content-Type:
              > multipart/form-data;boundary=---------------------------7d0b414b04\r\n");
              > dos.writeBytes("Host: "+host+":"+port+"\r\n");
              > dos.writeBytes("Content-Length:" + buff.length()+"\r\n");
              > dos.writeBytes("Connection: Keep-Alive\r\n\n");
              > dos.writeBytes("-----------------------------7d0b414b04\r\nContent-Dispositi
              > on: form-data;name=\"xmlDoc\"\r\n\r\n");
              > dos.writeBytes(buff.toString());
              > dos.writeBytes("\r\n-----------------------------7d0b414b04--\r\n");
              > dos.close();
              >
              > ------------------------------------------
              

  • How do pass the UserID and Password in the SOAP header for web services

    I am encountering issues trying to pass the userid and password in the SOAP header when consuming a 3rd party web service.  Rostewitz posted something similiar but I don't know how to type iv_xml.  Any help would be greatly appreciated.
    Thank you,
    jpina

    It helps to post a link to a thread when you refer to it.  If you are trying to implement that solution though, you can look at the parameter of the corresponding method being called.  The parameter has type 'SIMPLE' which means that it is compatible with all of the predefined elementary ABAP types.  In this case, you should use 'STRING'.

  • How to hide login and password transported in interface ?

    Hi !
            In the current project that I´m working, the customer is developing a website in .Net and intend to use XI to communication between website and ECC 6.0. One of their needs is to create an interface to call a RFC in ECC 6.0 to validate login+password provided in the website(they created a Z table to persist login data, and a RFC to receive login and password and check in this table).
            My problem is, to solve this situation, I would use a simple sincronous interface but, the login+password information will be logged into monitoring screens of XI, and it´s not desireble, so I´m finding a way to hide this information.
            Initially, I was thinking to make 2 adapter modules, 1 to be used joined to the Sender SOAP Channel that will be used to the website call, that could get the data send by the website and encrypt it, to be sent to the XI pipeline encripted(only the fields login and password), and the 2nd to be used joined to the RFC Receiver channel, to decrypt login and password to be sent to the RFC call. Another alternative that I found was to use the MessageTransformBean and XLST mapping + java, but I´m looking for another alternatives.
            Somebody knows if there are some way to achieve this(hide some information in a message being processed by XI)?
            In time, I can´t to disable the logging of syncronous interfaces, because it´s customer requirement.
            Any help is welcome !
            Thank you in advance, and best regards,
            Wilson

    Hi !
            I have solved the problem.
            I used to develop 2 adapter modules, one to intercept the message arriving to SOAP Sender communication channel, encrypt the content of parametrized fields(in the module tab of the comm. channel) and deliver the updated message to the processing chain of the comm. channel.
            This message is so processed correctly by the XI pipeline, and delivered to the RFC Receiver Comm. Channel. I developed another adapter module to receive the data sent to the receiver RFC Comm. Channel, decrypt the contents of parametrized fields(like the another module, parametrized in the module tab), and deliver the updated message to the processing chain of the comm. channel.
            After some  tests, I verified that the message doesn´t remain logged unencrypted into XI(I checked Message Monitoring for Adapter Engine at Runtime Workbench, and the SXI_MONITOR trn).
            Like mentioned by Jaishankar, the SOAP Adapter initially didn´t accepted the module adapter that I wrote following the stardards existing in several documents about adapter modules here in SDN, but after some research, and debbuging sections of the adapter module, I achieved to develop the correct code to work.
            Thank you for your attention, and best regards,
            Wilson

  • Saving login and password of the server in MD5-Challenge

    I want to authenticate the server automatically using MD5-Challenge with Cisco Secure ACS4.1.
    When I unplugged and plugged the network cable, it always prompt for login and password.
    How can I avoid this process?
    What can I do if I want to have authentication automatically at the start-up of my server.
    Note: All the fonctionnality of the ACS server is OK

    This is a function of the server. How this will work, if at all, depends on which type of server you have.
    Which server, which network device and what scenario are you using with MD5?

  • FTP login and password are not saved on some sites

    On some of my sites the FTP login and password are not saved
    (even though the "saved" box is checked). Dreamweaver 8.0 on XP
    SP2. I can export the site information and then import the same
    file exported and there still will be no login or password placed
    in the login or password window. I opened the exported .ste files
    in notepad and found the login correct and the password incorrect.
    I uninstalled Dreamveaver and reinstalled still same
    problem.

    Ok, I just spent about 3 hours on this. Here's the latest
    that I've found. I had looked at the knowledgebase and my registry
    matched what was suggested. As this has been an ongoing issue for
    me, I thought it was still an issue. Apparently 8.02 did have some
    improvements.
    I can only guess that many of the 36 sites I have in the Site
    Manager lost info before the .02 update.. or I hope so.
    I did however discover that there is still what could be
    considered a minor bug. I went in to Manage Sites and selected edit
    for all of my sites, fixing the ones that had lost their user/pass
    info. I'm not positive, but I think only the last edited site kept
    it's data.
    I discovered after many checks on all the sites, over and
    over and over, that it appears that they are now holding the data,
    but, if I add the user/pass, I must not only click the OK button to
    close that particular site, but I must also click the 'Done' button
    before only that one will be saved.
    So, I thought I was fixing logins when in fact I was only
    fixing one at a time.. Completely closing 'Manage Site' seemed to
    hold one new set of login data each time. Seems that it shouldn't
    be this way.
    But I must say, I am rejoicing at the moment, as I actually
    have all my sites set up with FTP info and I am now looking forward
    to hopefully adding more and maybe they'll actually be available
    for the next editing session.

  • Creating a login and password in the forms

    I have been trying to create a username and password to access the database that I have created using Form Builder. This is the code that I have created....the syntax is correct but its not performing the task i.e direct the user to a different form
    DECLARE
    LOGINNAME VARCHAR2(20);
    PASWORD VARCHAR2(20);
    BEGIN
    IF LOGINNAME = 'CSR' AND PASWORD = 'CURRIE'
    THEN
    CALL_FORM ('C:\ClothingCloseout\Menu.fmx');
    ELSIF
    LOGINNAME = 'MGMT' AND PASWORD = 'SANDRA'
    THEN
    CALL_FORM ('C:\ClothingCloseout\Menu.fmx');
    END IF;
    END;
    I also tried using the same login and password through which I get connected to teh database but that does not work either....Thanks for the help!!!

    Hi Ashley,
    The compilation is successful because there are no syntax errors. When the code is executed depends on where you have put this code (On-Logon trigger, etc).
    In this situation, it looks like the 'code' has not been executed YET because the event has not been triggered OR it has successfully gone through ie - the IF test for loginname and pasword was not satisfied. Therefore, the call_form was never performed. (Your code does not prompt the user to input 'Loginname' and 'Pasword'). In this case, loginname and pasword are NULLs.
    Regards,
    John

Maybe you are looking for