Create Bluetooth Profile in order to setup Sennheiser MM 550 X

Hi,
I wanted to connect my bluetooth headset to my MBP. Pairing was successfull, but could not connect. I always received the error: "a bluetooth audio error occured".
After contacting Sennheiser support they told me that they cannot help because there has to be some bluetooth profiles setup on the MBP for which I would need some release codes. They told me also that they are sure that Apple Support can help here:
They say that if the following bluetooth profiles have been setup the headphones will work:
Hand free, Head set, azdp und avrcp
Hope that somebody can help.
Best regards,
Thomas

Found the solution and it was actually quite easy.
Go to Preferences - Network and set up a new Profile named "Head set", with all default settings.
Then re-initiate the pairing process and then I was able to connect the headphones.

Similar Messages

Why we create settlement profile. What master data must exist in sap before creating settlement profile for order.

Why we create settlement profile. What master data must exist in sap before creating settlement profile for order.

As mentioned above, settlement is to post the cost to cost centers or any possible receivers as per the settlement profile. PM / Service orders, WBS elements, etc., can be temporary cost bearers from which cost should be settled to some permanent receivers.
Cost elements / Cost element groups should be available as Master data before configuring settlement profile.
To answer your latest query, there are 2 type of cost centers.
Sender Cost Center - Against this, labor / internal activity price will be maintained in KP26. This cost center will be maintained in PM / PP work centers. While creating PM / PP orders, one of the work centers & activity types will be mentioned. Based on the KP26 entry for the combination of Activity type & Sender cost center, price will be picked & calculated according to work hours / labor hours maintained in PM / PP orders.
Receiver Cost Center - Receiver cost center is the department / location cost center to which cost should be settled. Only receiver cost center will be maintained in settlement profile. Sender cost centers will be picked up automatically from work center.

SD How to create IDoc once Sales Order Invoice (Billing) has been created ?

Hi,
How to create IDoc once Sales Order Invoice (Billing) has been created ?
I.e Once you click on save button of Invoice , IDoc Should genrate Automatically.
Thanks

Hello,
Go to T.code VV31 and select the billing output type and select the access sequence required and in the details screen of create condition records give all the required entries for eg: may be Billing Type, Sales Organsiation etc.and in the medium choose the option as 6(EDI) and time select as 4 that is immediately after saving the document.Also please ensure that particular partners for whom idoc should be generated they need to have partner profile setup with the billing message types. Hope this helps.

Settlement Rule for service order created based on sales order

Hello,
I am creating a sales order and entering WBS as an cost object.
After creation of sales order the Service order is created.
For service order type in the settlement profile WBS is maintained.
But the system is not copying the WBS in Service order which is maintained in sales order.
Can any body have an idea on this?
Regards
Abhijit

Hi,
As far as my understanding when service order is created through sales order then settlement rule is SDI and its item number
Not what you maintained in account assignment tab of sales order
When you settle service order then cost will settle on sales document and its item and then latter you settle sales order then settlement receiver is WBS element which you maintained in account assignment tab
Kapil

New order Type setup in Oracle Apps 11i

Hello All,
I setup a new order type for a new organization. When i want to select 'Invoice Source' for the order line type in 'Transaction Types', I see nothing in the list of values.
The Invoice Source is already defined and is working for other order types for existing organization units.
Regards
AM

Thanks for your response.
A transaction type (INV) is already defined in AR. This is what is assigned to an existing organization. I set up a new org and am trying to create a new order type for this org.
Here is what I am doing:
1) In order Management--Setup , created a new Transaction Type (New_Line). Transaction Type Code is Line, order Category is Order. The Sales Document Type defaulted to 'Sales Order'
2) Then i defined a Transaction Type (New_Order) and assigned the Line Flow (order type --->New_Order, Line Type-->New_Line, Process Name ->Line Flow - Generic)
I am running into two issues.
1) Can't assign the Invoice Source to the New Line Type I just defined; and
2) When I book an order, I get "No workflow assigned ..." Error.
Am I missing anything,
Thanks
A/M

How to create IDoc once Sales Order Invoice (Billing) has been created

Hi,
How to create IDoc once Sales Order Invoice (Billing) has been created ?
I.e Once you click on save button of Invoice , IDoc Should genrate Automatically.
Thanks.

Hi,
We need to do custom configuration for this scenario such that an output type will be attached when ever an INVOICE is created.
Refer to application V3 in NACE. The Output type should contain an entry with transmission medium: Distribution (ALE).
for example check the customization done for an output type in NACE.
Goto NACE ---> Select an application V3 ---> Click on processing routines ---> select the output type (Eg: RD00) ---> Click on Details button (CNTRL + SHFT + F2) which gives the configuration info.
For example we can generate the IDOC based on the settings in partner profiles for the customer (Sold To)
With Regards,
Dwaraka.S
Edited by: Dwarakanath Sankarayogi on Jan 29, 2009 8:16 AM

How to Create Roaming Profile(s) For Windows Workgroups

This Tutorial Shows how to create roaming profile(s) for Windows Workgroups.
Here are the steps in order to do this:
On the host PC:
1. Goto 'Folder Options'>'View' and un-tick 'Use Simple File Sharing'.
2. Goto Network Connections and right click on the 'Local Area Connection' (Ethernet recommended)
3. Goto Properties>General, and tick 'File and Printer Sharing'.
Click Apply + Ok.
4. Goto Control Panel>User Accounts, add a new user.
5. Logon to this user, and open the profile folder properties.
5b. Share this folder.
6. Make the Share permissions so that 'everyone' has: Full Control, Read, Change.
Click Apply + Ok.
7. Click on 'Caching' and disable Caching for this Share.
Click Ok.
8. Now goto the 'Security' tab and give 'Administrator' and 'SYSTEM' 'Full Control'.
Click Apply + Ok.
On the remote PC(s):
1. Make the same User as on the Host.
1b.Logon to the account and log back out again. Delete the profile folder from 'Documents and Settings'.
3. Give 'SYSTEM': 'Read','Read and Execute','List Folder Contents' to the 'Administrators' Profile
4. Type 'lusrmgr.msc' into run, goto: 'Users', double click on the new user and goto the 'Profile' tab.
4b. In the 'Profile Path' box, type \\hostPCname\ProfileName.
Click Apply + Ok
*Note* Replace the \\path\ accordingly to what names are on your Host PC.
5. Goto regedit>HKLM\Software\Microsoft\Windows NT\CurrentVersion. Double click
on 'ProfileList'.
Find which key is for the new user. (Example S-1-5-21-58435627-18431725-18026167-1003)
6. Right click that key and goto: 'Permissions' and give 'SYSTEM' 'read'.
*Note* Once you logon to the roaming profile from the remote PC for the first time you can undo this step.
7. goto GPEdit>Computer Configuration/Administrative Templates/System/User Profiles:
Enable these settings:
'Do not check for user ownership of roaming profile folders'
'Delete cached copies of roaming profiles'
'Log users off when roaming profile fails'
"Add the Administrators security group to roaming profiles'
'Prevent roaming profile changes from propagating to the server'
7b. Make 'Timeout for dialog boxes' '1' (seconds)
8. goto: Computer Configuration/Security Settings/Local Policies/Security Options:
Make 'Number of previous logons to cache (if server is unavailable) '0'
Now you're ready to login to the Profile on the remote PC.
*Note* Sometimes, when windows loads it takes a minute for the profile folder to become shared again.
Thanks for reading.

Hi,
I have replied to the below thread mentioning the FM's to create Profile sets, profiles and also target groups. This may be helpful to you.
Re: target group creation
Regards,
Priyanka

Unable to Create Customer Profile at Site Level

Hello All,
I am working on R12 Customer Conversions.
As part of this, i am trying to load the customer profile amounts at levels. 1. Account Level 2. Site Level
At Account Level, When ever i create a new account defaultly a new record is creating in hz_customer_profiles for the account_id. And i am passing 'cust_account_profile_id' to the hz_customer_profile_v2pub.create_cust_profile_amt. And able to do create customer profile amounts successfully.
But
At the Site level, when ever i create a new site, its NOT creating a record in HZ_CUSTOMER_PROFILES. If it creates i can have this 'CUST_ACCOUNT_PROFILE_ID' and pass it to the API
but its not doing so.
Could you please tell is there any setup for Creating HZ_CUSTOMER_PROFILES while creating SITE Use.
Please help me in this.
Thank you,
Aush

Hi Aush,
There is not specific setup for the same. You might not using the APIs correctly. Did you use hz_cust_account_site_v2pub.create_cust_acct_site API to create site? Once you create the site, you need to defined the site use using api, hz_cust_account_site_v2pub.create_cust_site_use. This Site use api will insert the record into HZ_CUSTOMER_PROFILES for the site record.
Once you create the site use, then you can define the profile amount using hz_customer_profile_v2pub.create_cust_profile_am API. Hope this is helps you.
- Kiran

Avconvert: failed to create an Export Session. Check setup.

I get the message "avconvert: failed to create an Export Session. Check setup" when i try to convert an mpeg video to mp4. Any solutions?

here we are 4 months (give or take) and 10.7.1 did not provde a fix. My
"avconvert: failed tocreate an export session. Check setup"
also comes for trying to convert avi files.
Something else that wasn't fully tested before the release of Lion.
I have a DivX account and can't use the player unless I wan't to stare at my desktop with whatever open files and folders that are there, listen to the video but not see it and loose ALL control of everything. I have to efectivly cut the power to the Mac in order to be able to use it.

Want to Create batch in process order at a time of Operation release.

HI,
We are going to release operation one by one for process order. There are 4 operations in my process order. I want to create batch in process order header when i release first operation.
Is there way i can set the Production Scheduler Profile to PREL to create batch at header level.
Thanks in advance!

Thanks for the Information,
to my understanding, all the Operation controls are in Operation control key.
There is No Batch creation functionlaity assiciated with Operation control key.
Look for a user exit to create the Batch with the PREL of the Header or REL of the 1st operation.
Regards
Ratan

Apple TV unable to join network without creating a profile.

I am trying to connect my Apple TV to the WiFi network at my university. There are several networks. When I try to connect to the main network which I connect my laptop to, it says I must create a profile. I followed the steps on the Apple TV support website to create a profile but it was unable to be installed on my Apple TV because of two errors which said that it was unable to activate the profile. When I try to connect to the other two networks, it says that the connection is successful but is unable to set the date or time and is otherwise unable to perform any functions that require internet. I am not able to restore my Apple TV because it says I need to install the latest update first, which requires internet connection. I have tried resetting the Apple TV multiple times.

If the school network requires login via webpage then that will not be possible. You will need to speak to the IT dept in order to get onto the network.

COMAC - COHV: manage object profile for order information system

Hi,
when you carry out an collective availability check from transaction COHV or COMAC, it is possible to select a layout or a profile. The layout can be defined within the transaction.
What about the profile ? I can't find how to create a new profile in the customizing for order information system.
In standard the profiles are:
000001 standard profile
000002 pick list
000003 collective availability check
000004 documented goods movements
Do you have any idea where the profiles can be maintained ?
Many thanks
Regards

Hi,
Go to SPRO > Production >Shop Floor Control > Information System>Define Profile for Order Information System.
Hope this helps
Regards
Ali

Colorsync - how do I create a profile for HP printer

Help. I have a new printer (HP Photosmart C4750), and it's profile doesn't at all match my onscreen colors. I need to create a colorsync profile that will address this, but am having NO success with the information I'm finding. Anyone?

Your best bet (cheapest) is to look on HP's site and see if they have profiles for that model printer. You may also find them on the disks the printer came with.
Be aware that printer profiles are very specific. The exact same model of printer must be used when creating one, and the exact same paper. When you're done, that profile is only good for the paper used as glossy paper will give you completely different results than plain paper. It's also brand specific. If you used HP glossy paper, you can't substitute Epson glossy paper, or even a different type of HP glossy paper. Color will come out different.
So if HP does have any profiles you can get for your printer, they should also be noted as to what paper they are for.
Next least expensive is to have an outside service create your profiles for you. They would send you target images to print, which need to be printed in a very specific manner. You then send the printed sheets to them and they create a profile from them to be emailed to you upon payment.
Here's one place which can do that. You can find a few more by looking through these links.
After that, you need to shell out some bucks. Least expensive is an X-Rite ColorMunki at about $320 at various online stores. I've tried them, and while they work, they don't produce very good printer profiles. What I use is Monaco (X-Rite) Profiler with a DTP-70 auto reading spectrophotometer. However, this type of setup will set you back about $4,500.

Howto create SCEP profile with ICPU to enroll with MEM server on Lion

How can I create a profile with iPhone Configuration Utility with SCEP settings that will enroll my iPhone with a MDM server on Lion?
The reason I want to is because I want to create an enrollment profile which cannot be removed by the user.
So my idea was to create a profile in the iPhone Configuration Utility with the rigth SCEP settings of my MDM server.
But I don't know what the settings should be or how to find them.
Thanks for any help!

After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

Is the bluetooth profile - SAP (sim access profile) supported

Is the bluetooth profile - SAP (sim access profile) supported by iPhone. I need this profile in order to allow my car to support complete handsfree.

A quick search on here revealed these existing threads asking the same question:
http://discussions.apple.com/thread.jspa?messageID=11746221&#11746221
http://discussions.apple.com/thread.jspa?messageID=11629059&#11629059
http://discussions.apple.com/thread.jspa?messageID=11631930&#11631930
Short answer is No.

Create Bluetooth Profile in order to setup Sennheiser MM 550 X

Similar Messages

Maybe you are looking for