Howto create SCEP profile with ICPU to enroll with MEM server on Lion

How can I create a profile with iPhone Configuration Utility with SCEP settings that will enroll my iPhone with a MDM server on Lion?
The reason I want to is because I want to create an enrollment profile which cannot be removed by the user.
So my idea was to create a profile in the iPhone Configuration Utility with the rigth SCEP settings of my MDM server.
But I don't know what the settings should be or how to find them.
Thanks for any help!

After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

Similar Messages

  • LoadUserProfile() creates a profile with Chinese characters on a remote system

    Hi,
    I'm working on an application where LoadUserProfile() is being used to remotely load a user profile on a machine. The token being passed to LoadUserProfile() is obtained from LogonUser(). 
    When doing this only with a Domain Admin user which is added in Active Directory, it creates a profile with Chinese characters in the C:\Users\ folder of the remote machine. Note that this happens only when logging in for the first time with
    this Domain Admin account remotely on that machine.
         // code:
          PROFILEINFO pi;
          memset((void *) &pi, 0, sizeof(PROFILEINFO));
          pi.dwSize = sizeof(PROFILEINFO);
          pi.dwFlags = PI_NOUI;
          pi.lpUserName = (TCHAR *)strUser;   //strUser is the User name, and it shows correctly here when debugging
          if (LoadUserProfile(hToken, &pi))
    //It is actually successful, and comes here when debugging.
    Although the name shows up correctly when debugging (remotely), why is it creating a profile with Chinese characters on the remote machine? 
    TIA,
    Jy

    CreateProfile won't load the profile.  You need to use LoadUserProfile to load the profile, and you need to query for a roaming profile path to put in the lpProfileInfo parameter if you want to include that as well.  You need a token for a
    user to call LoadUserProfile, but not a profile handle.  LoadUserProfile will populate that for you before it returns if it was successful.  See this excerpt from
    https://msdn.microsoft.com/en-us/library/windows/desktop/bb762281%28v=vs.85%29.aspx:
    Upon successful return, the hProfile member
    of PROFILEINFO is
    a registry key handle opened to the root of the user's hive. It has been opened with full access (KEY_ALL_ACCESS). If a service that is impersonating a user needs to read or write to the user's registry file, use this handle instead of HKEY_CURRENT_USER.
    Do not close thehProfile handle.
    Instead, pass it to the UnloadUserProfile function.
    This function closes the handle. You should ensure that all handles to keys in the user's registry hive are closed. If you do not close all open registry handles, the user's profile fails to unload. For more information, see Registry
    Key Security and Access Rights and Registry
    Hives.
    WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

  • Receiving Error : Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables. while trying to create a new Customer.

    Hi All,
    We have set up a new Operating Unit in Oracle Apps. Now when I am trying to create a new Customer in that Operating Unit, I am receiving following error:
    ERROR MESSAGE:-Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
    We do have MO: Operating Unit and MO: Default Operating Unit set properly at Responsibility level for the Responsibility through which I am accessing this form.
    Your help is appreciated!
    Thanks in advance,
    SKA

    You can refer this thread and check your MO operating unit is set or not https://community.oracle.com/message/3937028 thanks

  • Firefox doesn't open with profile even after creating a profile through Profile Manager.

    I created a profile of Firefox yesterday using Profile Manager. And placed it in a virtual encrypted drive created by TrueCrypt. But Firefox didn't open with the profile. Instead it opened in default setting that Firefox usually gets when newly installed. I tried to select the profile through Profile Manager and open Firefox but to no avail. Even tried placing the profile in the Profile folder in Firefox pathway in AppData. Still same thing. At last reset Firefox and the profile was deleted. Now I'm with newly default setting. Luckily I had saved my bookmarks from Bookmark Manager.
    I just wanted to save a profile so that only I can only access my profile and any other person would just had to use default setting. Also to restore my settings in case I install a fresh Firefox or reset Firefox to solve a problem.
    Please help me fulfill my wants as stated above and why did it not work yesterday with the Profile Manager?

    Hello ams963, i think the problem is with TrueCrypt because it is not support your win 8 yet. see: http://www.truecrypt.org/
    http://www.truecrypt.org/docs/version-history
    see if can find a method in the next link, not too useful i think for your win 8 : [http://kb.mozillazine.org/Protect_the_profiles_contents Protecting the contents of the profile]
    thank you

  • Can 35mm Film Scans create a profile or must it be digital with EXIF data?

         I have a lot of old minolta lenses to go with old manual minolta 35mm film cameras.   There is no Meta data in the scans of the film comming off the scanner as I create the DNG file, at least none I'm aware of.   However looking at the images in Lightroom it seems as if lightroom attaches such information to every image once it's imported.
         Can this applicaiton be used to create profiels for scanned film images?  Can I take the 9 shots of a chart, load them up, and create a profile using scans from 35mm film?
    I realise that the instrutctions say the EXIF data allows you to have profiles automtaicaly apply.  But I'm not worried about that feature.
    My plan was to profile my old lenses and label the profiles so I can manually attach them to images in lightroom.
    A fried of mine says he doesn't see where the lens profile creator  can work without EXIF data but I don't see why not.

    download exiftool.exe, drop it in the directory with your dngs, and then create a .bat file with the following command:
    exiftool.exe -exif:FocalLength=35 -exif:FocalLengthIn35mmFormat=35 -exif:FNumber=2.8 -exif:SubjectDistance=10.5 *.dng
    (adjust your numbers accordingly- subject distance is in meters)
    run the .bat and it should tag your images with all the exif info that the profile creator needs. make sure you don't crop your images smaller than the original shot size too, otherwise your FocalLengthIn35mmFormat will be wrong

  • Issue with Creating Forecast Profiles/Forecasting

    Hello Experts,
    We are facing an issue with creating forecast profiles.
    We have two FYVs defined in our system, one with 52/53 fiscal weeks (Fiscal Variant W1) and the other with 12 fiscal months (FYV M1), Our storage buckets profile (STP) uses W1,  since we have many dataviews that use W1 as the FYV in the attached Planning buckets profile(PBP). We also have dataviews that display in fiscal months (use FYV M1 in the attached PBP), data from Fiscal weeks will be aggregated and shown in Fiscal months . We need to do forecasting using FYV M1, that is forecast in Fiscal Months , but since the storage bucket profile has W1 which is used in the Planning Area config. We are unable to create any Forecast profiles with FYV M1 . Please note that we cannot use M1 in STP because when we used M1 in STP, we could not create  dataviews in fiscal weeks (using W1)
    1. Is there any way we can forecast using M1 while having assinged W1 to the Planning area/STP ?
    2. OR we are willing to assing M1 to PA, provided we can use W1 in some of the dataviews, unfortunately we were unable to do this, though the vice versa is possible i,e. we could have W1 in STP and M1 in some of the related PBPs/ Weekly Dataviews.
    Please let me know if any of these are possible or if there is any alternative way to do forecasting in Fisc Months.
    Thanks
    Tej

    Hi,
    You are correct, the Storage bucket profile always has to be at a detailed level. Time bucket profile can be at higher levels like monthly, quarterly etc.,
    Coming to the root of your problem, which is you are unable to forecast at a level other that what is specified in your Storage bucket profile, unfortunately the answer is no.
    You can do a forecast only at the level at which the data is stored and not at the level at which the data is viewed.
    One work around for this is to create an additional planning area with the same MPOS and this addl PA can contain only those bare minimum KF required for your forecast. After you generate your forecast, you can copy it to your Weeks based PA and then proceed from there. This copy of KF between PA is much faster as it will happen at LC level and should not cause time delays.
    NOTE - You have to exercise caution when you are using 2 periodicities i.e., weeks and months, if you are using standard SAP calendar then you are good to go. If you are creating custom Fiscal variants pls ensure the start and end of a month is same in both the weekly and monthly variants. Failing which, there will be mismatch of data between the two dataviews.
    Hope this helps.
    Thanks
    Mani Suresh

  • I was upgrading to iOS5, backed up files on my iphone4, when relaunching the iPhone, I decided to create a new profile (and then copy all contacts from the old profile). The old profile then got erased, together with all contacts. No old profile in iTunes

    I was upgrading my iPhone 4 to iOS 5. The old files in my profile backed up. When relaunching the iPhone, I decided to create new profile on the iPhone, thinking I could copy my old contacts from the old profile (as iCloud seems to merge all contacts). When the ne profile was created on the iPhone, the old profile on iTunes disappared without a trace.  Please help restore my contacts.

    Did you use the Profile Manager or did you use reset to create that new profile?
    *https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
    A reset tries to import some data from the old profile and then moves the profile to the desktop, but if you use the Profile Manager then you need to copy that data yourself to the new profile.
    If you've deleted the old profile before making sure that your data has been recovered then you've lost that personal data.
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • AppV 5 slow to refresh with roaming profile (no redirects) but fast with local profile

    Hi,
    I have an issue I can't get thought out. I have an AppV5 SP3 full infra, with SMB share and local caching of packages enabled. Everything works from a functional level. However I have an issue where users with a roaming profile get a very slow AppV refresh
    during login.
    I created a few testaccounts, a few with local profile and a few with roaming profiles. For these testusers there are NO folder redirects. The only difference between them is local profile or roaming profile.
    When I login with a local-profile user initially, the AppV client rather slowly refreshes the applications and shortcuts. It generates quite some CPU load on the RDS host, but as soon as the shortcuts are placed everything is fine. When I log that user off,
    and log in again, the shortcuts are there immediately and I can immediately start the applications (Office 2010 for example). Blazing fast. Also when logging in, the refresh-UI is there for about half a second, it really flashes and it's done.
    Then with a testuser with roaming profile, the initial refresh is about the same. But when I logoff that user and login again, it's all very slow. The shortcuts are there but blank initially, it takes about 5-10 seconds to get the correct icon. It takes
    much longer before the refresh actually starts (sometimes up to 30 seconds after login), and it takes 5-10 seconds to do the refresh, with 100% cpu load on the thread AppVclient.exe is running on. Also right after loging in when the shortcuts are blank they
    don't work until they get the proper icon. WHen everything is refreshed it works all fine though. It's just painfully slow at start.
    I don't understand this. I can reproduce this every single time. Without folder redirects I don't see the difference between roaming and local profile from AppV perspective, as the roaming profile is of course copied to the server and in that sense the server
    just works with a local copy anyway.
    Anyone encountered this, and how to troubleshoot, or better fix this?

    So is the fact that there is a 5-10 second delay during refresh actually an issue? What I mean by that is - are any users comparing the local profiles with roaming profiles experience, or complaining that the delay is there?
    Roaming profiles and Folder redirection are of course very simple to configure; however for the best user experience I recommend managing profiles with a real profile management solution.
    If you have MDOP, then you'll also have access to UE-V. You've mentioned your environment is RDS, which sadly doesn't get UE-V, even though you have App-V.
    Here are some resources on UE-V + App-V and what's required when managing App-V with roaming users:
    How To Use Microsoft User Experience Virtualization With App-V Applications
    Application Publishing and Client Interaction: Roaming registry and data
    Here's also some resources on App-V performance worth looking at:
    Performance Guidance for Application Virtualization 5.0
    App-V Performance Best Practices: New Project VRC White Paper
    Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
    answer your question). This can be beneficial to other community members reading the thread.
    This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
    Twitter:
    @stealthpuppy | Blog:
    stealthpuppy.com |
    The Definitive Guide to Delivering Microsoft Office with App-V

  • When uploading my formatted resume to my Apple Jobs profile, I am always presented with a c:\fakepath message and the resume does not upload. How can I rectify this?

    When uploading my formatted resume to my Apple Jobs profile, I am always presented with a c:\fakepath message and the resume does not upload. How can I rectify this?

    Add this one to the list of thinks that don't work on the Apple Job Board. It looks like Apple is using ADP's VE (Virtual Edge) technology to run this system, and I've been stupified by the number of features that are just broken, or so poorly thought out by ADP as to be unusable, (certainly for webkit and mozilla browsers at least: I didn't bother checking IE.)
    Here are a few highlights:
    "My Job List", list of jobs applied for, seems to max out at three. You can apply for more than that, but you can only see the first three.
    "Search Using Your Resume" feature yields few or no results, even when the pasted text contains only common, exactly matched words like 'Design' or 'Engineer'.
    The missing resume upload, described in this thread.
    "My Job Agent" seems to never flag anything, at least it hasn't ever for me despite pretty loose criteria.
    Agent's created using "My Job Agent" eventually just disappear, which is fine because they don't seem to work.
    When updating a profile, acknowledging the 'Terms' happens twice in a row. 
    Job seekers can only supply one cover letter despite being able apply for several jobs.
    Pagination for search results only appears at the top of the page, so it's necessary to scroll down through each page, then up to the top again to proceed to the next page.
    Well, I'm sure there are others, but you get the idea. I hope the Apple folks can fix this, (or twist ADP's arm to fix it,) so it better represents the quality of experience that Apple is so respected for consistently delivering.

  • Is there a way to create Preflight Profile using Java Script / C++ SDK?

    Hi ,
    I need to dynamically create preflight profiles depending on the analysis of the document. I am using Adobe's C++ SDK to access the Adobe Acrobat Pro X as a server to perform the actions I need to. Maybe I failed in my search for the function to create a preflight profile. Is there any other SDK to create the preflight proflies within the Adobe Acrobat environment.

    Hi,
    As discuss above , we have to create the XML response  ,before that first you have to
    GetConfiguration() details of existing virtual network. 
    string.format("@<NetworkConfiguration xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns='http://schemas.microsoft.com/ServiceHosting/2011/07/NetworkConfiguration'>
                <VirtualNetworkConfiguration>
                <Dns />
                <VirtualNetworkSites>
                <VirtualNetworkSite name=""{0}"" Location=""{1}"">
                <AddressSpace>
                <AddressPrefix>10.0.0.0/8</AddressPrefix>
                </AddressSpace>
                <Subnets>
                <Subnet name=""Subnet-2"">
                <AddressPrefix>10.0.0.0/11</AddressPrefix>
                </Subnet>
                </Subnets>
                </VirtualNetworkSite>",Networkname,location)+(@"<VirtualNetworkSite name=""demodsf1"" Location=""West Europe"">
            <AddressSpace>
              <AddressPrefix>10.0.0.0/8</AddressPrefix>
            </AddressSpace>
            <Subnets>
              <Subnet name=""Subnet-1"">
                <AddressPrefix>10.0.0.0/11</AddressPrefix>
              </Subnet>
            </Subnets>
          </VirtualNetworkSite>  </VirtualNetworkSites>
                </VirtualNetworkConfiguration>
                </NetworkConfiguration>")
    you have to append the node for existing node with new values , i got it its adding new virtual network 
    Best regards,

  • Can't create a profile or find newtwork

    I have a WRT300N and a WMP300N card with 3 computers in my house. My bro's computer is wired. My sisters has one WMP300N card and works fine. My Computer was working fine I used it this morning then I lost my connection and my linksys wireless network box was greyed out and it couldnt find the network to connect to. After trying a few things I decided to uninstall and re install the WMP300N card and I did so now the first thing that pops up is Create A Profile. But there is no network being found and i can't click anything other than exit. Any Idea what to do? I know I've solved this problem in the past. And my sister's computer still works fine and has access to the internet. Any help would be appreciated thanks

    Check the Wireless network settings from router ... Install the CD ... once it will show you settings to create the Profile .... Use the same settings as to configure the Profile .....
    Reboot the computer after installtion .... see if it shows connected ....

  • How do I create a profile to play app i can not move beyond this screen

    I have downloaded a free app from itunes and the first screen  is requesting I create a profile name. I keep tapping on the screen to create one but that part is dead.
    On the screen it has
    CREATE A PROFILE
    First Name   Johnny (this is shaded)
    Email (optional)  [email protected](this is shaded)
    or Login with Facebook - of couse this works but I do not have nor want a facebook account.
    I have tried installing and uninstalling twice but it make no difference.
    Any suggestions

    This assumes that none of the layer are already in layerSets( group ) and none have layer locking.
    if(app.documents.length>0){
        var doc = app.activeDocument;
        while(!doc.artLayers[0].isBackgroundLayer && doc.artLayers.length>0  ){
            var newSet = doc.layerSets.add();
            newSet.name = doc.artLayers[0].name;
            doc.artLayers[0].move(newSet,ElementPlacement.INSIDE);

  • Display Calibration Creates Color Profile Problems.

    I haven't received any response out of the MBP Display forum and I thought you guys might have better insight anyway because you are dealing with color calibration more often. Here it is:
    I used colorsync utility to calibrate my monitor, hoping it would at least get the colors more accurate than they are with the "Color LCD" profile. The Color LCD profile has a bad yellow tinge to it. I went through the process 4 times so I would be able to choose the best profile out of the 4. (Now I can't delete the extra profiles but I guess that is a different topic...) The color accuracy and the gray-tone is MUCH better BUT I have a slight (understatement) saturation problem.
    My problem is after using Color Sync, ALL of my REDS are oversaturated and blown out. There is a problem with the blues and greens as well but it isn't as bad. Of course, they look fine in non color managed applications (ie FireFox) but everything else makes my photos look horrible. Even the RAW files straight out of the camera look blown out.
    I had, at first edited these files on a PC so they always looked fine but now that I have switched to Mac I have noticed how oversaturated they are in all of its color managed applications. (Safari, preview, and even the desktop.) I thought perhaps that I had just pumped up the contrast and saturation too high on the PC and the color profile was now creating a problem because the color was set for an un-profiled file. BUT after viewing the unaltered .NEF's straight out of my camera, they too are oversaturated.
    Now, I have some wallpapers I had downloaded from the web that look the same as before. It is just MY OWN photographs that are oversaturated. Obviously I have chosen the wrong color profile or something is wrong with my workflow. The wallpaper that looks the same doesn't have a profile assigned it when I view-info. It just labels the color space as RGB. All my photos that have problems, have a color profile assigned. I am using sRGB as recommended. There are a few still using Adobe RGB (which is what my camera defaults to) and they have the same oversaturation problem.
    Aperture is set to export with an sRGB profile and CS2 uses sRGB as well.
    Any advice? What monitor and color management profile's are you guys using?
    I can't tell what is right anymore. What should I edit my photos to look good in? The only MONITOR profile that doesn't blow them out is Adobe/Apple RGB, Color LCD, and a few of the other default installed profiles.
    I've got a bad case of color vertigo!

    sorry uberfoto, did not get what MBP meant at first.
    what Jan says about color calibration tool is right....and start again from the RAW.....
    i am photographer in the advertisement, reportage, portraits and landscape.
    my problem was to get the thinks printed as I saw them on the screen.
    here what I have to say on that (part of another discussion):
    ".... Sorry, but no AppleTFT Display comes close to a hardware calibrated display. Maybe they are semi-professional. I do not say this to insult Apple, ore somebody else, but i say this to sway out the illusion of , " if I just spend more money on the calibration tool and software, I´ll have better prints". It´s just not possible, because the display cant show what is there. A Apple CRT Studio Display is far better in this. I you want to have a flat-screen TFT Display to bring good results, you have to choose one that is able to be hardware calibrated and has a higher lookup table (EIZO, LaCie, QuatoGrafics......)
    I use use one professional EIZO CG21" and one semi-prof. EIZO FlexScanL985EX(21") and the diffrence is important between the two.
    But i need only one to be Print Proof ready.
    Before i was always afraid when i gave the picture file to my client, because of what my pictures look like once it is printed. Now the outcome is right or differs only very little from what I saw on the screen. my calibration tool is EYE ONE. "..
    BUT your main problem is how it looks in the web.
    my thoughts and suggestion on this:
    1. most people see the web on PC Display. those use a gamma of 2.2
    (apple = 1.8) so pictures appear more blue with more contrast. this setting is made to hide the low ability of the system and display to show colors as they are and give and give crispy impression. So you will have to consider this when you prepare the pictures for the web. therefor the standard calibration of your MBP is best for your needs. ( for printing the Display has to be set on 5.600 kelvin ,that would be to warm 4 the wwweb).
    2.
    a) In the beginning I use Aperture 1.5 (or Lightroom) to select and prepare the pictures as I like them.
    b) then I export them in 8 bit/300 dpi in the size they will be used as PSD or TIFF.
    c) I will then open them in Photoshop (color-settings=web /internet) make the cleaning and so on.( 4 the web I always increase the saturation because sRGB and JPG will throw away lots of colors).
    d) AND NOW "save for the web ". This is definitely the best tool to prepare pictures for the web. on the right upper part of the window there is a flash-open menu where you may choose to see the colors like in windows or macintosh system.
    and on the lower right of the application-window there is a roll-down menu where you may preview the results in different browsers of your choice.
    It is here where you can produce amazing high Q pictures 4 the web under 100 kb.
    Hope this may help.
    good luck,
    larry
    G5 dual 2.3/4,5 gigRam/ATI 9600 128MB-PB G4 12"   Mac OS X (10.4.2)   EIZO CG 21"+EIZO L985ex 21"
    G5 dual 2.3/4,5 gigRam/ATI 9600 128MB-PB G4 12"   Mac OS X (10.4.2)   EIZO CG 21"+EIZO L985ex 21"
    G5 dual 2.3/4,5 gigRam/ATI 9600 128MB-PB G4 12"   Mac OS X (10.4.2)   EIZO CG 21"+EIZO L985ex 21"

  • I created one profile in Firefox. But while deleting the Profile i deleted the files also. How to get those files?

    For creating a User agent, I created one profile in Fire fox. But while i am deleting the Profile, i clicked on the button 'Delete Files'. Now i want those files. Can you please tell me from where can i get those files?
    Please revert back to
    [email protected]

    Yes, the places.sqlite has been copied. I don't see any specific instructions in the "restoring to a different locaton" directions on how to open the new profile, though. Step 7 just says to paste the contents of the backed up file to the new profile (in this case, I've copied them over the default profile created when I first downloaded firefox). This overwrote the existing files. Then it says to Start Firefox. Which I did with no old bookmarks showing up. That's why I posted here - am I missing a step once I open Firefox to make it look at the new profile information?

  • Automatically create a profile page when user registers?

    Hi everyone,
    I am building a site along with other people and I am the main web designer. I need to know how to have my site automatically create a users profile page when the said user registers on the site. Something very similar to YouTube or MySpace. Example: If a user where to create an account with the username bob678 the site/code would automatically create and directory called examplesite.com/userid/bob678 (like I said before very similar to YouTube). I cant seem to find the answer to this anywhere but I know it is possible. Any and all help is very appreciated!
    PS. I already know how to allow people to register, I just need it to create a page for them.
    Thanks

    If you want to actually create a physical directory, then you would call your server side scripting's file system functions. FWIW, many of the site's you've seen probably do not use physical directories. In many cases, the data is saved in a database and the server uses the rewrite engine to make the location more human readable.

Maybe you are looking for