Create bootable flash drive for Windows 8 in Boot Camp

I am running a Windows 8-based marine navigation program ("Coastal Explorer") in Boot Camp, on MacBook Air. I would like to create a bootable flash drive for emergencies. Should it have Maverick or Windows 8 OS? - or do I partition the key drive for both, with the Windows partition also containing a copy of the navigation software and maps for extra insurance? I guess the first question is, "Is this possible?" Then I would need to find information on how to create such a drive. All advice appreciated.

Windows drivers and Mac drivers have nothing to do with each other. So that's a no on your question.

Similar Messages

I am confused by the installation step that requires you to create a bootable USB drive for windows installation. What is the ISO image and why has it selected my Passport backup drive as the destination disc?

In the bootcamp installation it asks me to create a bootable USB drive for Windows Installation. To do so, I must choose an ISO image. What is that? When I click "choose" I don't understand the options presented. Is this the destination of the partition or where Windows will reside on the Mac? Why does it also indicate the the destination disk si my WD Passport Back up drive?

OK, so I have an apple superdrive hooked up to my mini (along with my Passport back up drive). I also have the discs for both 64bit and 32bit Windows along with the product key. I am still not sure what to do when faced with the options after "choose".

Convert flash drive for Windows 8.1 bootcamp installation from mbr to gpt

Trying to run Windows 8.1 pro x64 on my mid 2010 15" macbook pro. Get stuck during bootcamp installation in Windows because my partition table isn't compatible (MBR but needs to be GPT). My hard drive seems to be Logical partitions/volume etc, while my flash drive was formatted into MBR seemingly by bootcamp, or otherwise not altered into the GPT like it maybe should have.
Generally followed this guide http://www.howtogeek.com/186907/how-to-install-windows-on-a-mac-with-boot-camp/
Steps I took:
Had to use terminal/Xcode to edit info.plist from bootcamp to allow flash drive installation through bootcamp on my mac (removed the "pre" method).
With all three bootcamp options selected, managed to partition the drive
When restarted, my computer had black screen with "no bootable device found".
Restarted again, holding alt/option
Flash drive was now available as one of two options (the other being my standard mac drive)
Windows Setup loaded. Selected language/imputed key/select version etc.
Here is the strange part, the division of the disk does not include "bootcamp" anywhere in the title (like it should according to the guide), and is about 10gb smaller than my partition (assume this is a normal result of windows installation/os files etc). When I try to format the partition, it says I can't, and explains that I can't use MBR, need to use GPT.
Attempted to rewrite disk with Shift F10 Diskpart, list disk, etc, but here it shows drive 0, 1, and 2, (rather than drive 0 partition 1,2,3,4, with 4 being my bootcamp I think). This seems to be a method for installing windows on a windows pc, and I didn't go through with it because I didn't want to loose my mac os yet.
I am not proficient with coding/terminal use, and don't know if there is an option to list partitions etc, so I'm stuck. I can backup my mac and potentially change my partition table etc, but I feel like restoring with time machine would then wipe my existing partition. Is there a workaround I could use? Is there a specific sequence of backups/restores that would work? I'm also okay with manually drag and dropping the files I want back onto a clean slate computer if necessary. Or would simply buying and burning a disc with windows save myself the hassle? Please advise.
Sorry for long question, wanted to get info out right away. Can include more if necessary. Thank you all for your time.

TheMonark wrote:
I input that into mac terminal while running os? And then you'd like me to post the results on this discussion board?
Yes. It also helps if there are any calculations to be done with disk sectors.
My optical drive works fine, but I moved to France and didn't bring any disks. Would it be easier and safer to just burn my windows iso onto a disc and run it through bootcamp that way? I'm thinking the answer is yes at this point.
Yes, if you have a built-in Optical drive, Bootcamp expects to boot from the Optical drive, because it sets the CSM-BIOS layer for Windows to boot from the Optical drive settings in the NVRAM.
I'm about to head out to celebrate a birthday, but I will post back here in about 14 hours.
Enjoy the party!
Do you recommend just buying a DVD and doing it that way? I could easily return my info.plist to normal, and as far as I know, my optical drive works fine. Seems simpler if it would work with my copies of osx and windows. What do you recommend?
The changes in info.plist enable creation of the USB, but do not influence the boot device pointer that BCA will set when switching to the Windows Installer. My recommendation is to get DVD writable media (DVD+R or equivalent) and burn the ISO to a physical DVD and use BCA to install windows using the BCA USB and DVD media.

Using Rufus to create bootable USB Drives for Cisco ISE 3495 upgrade

I will give a try in the lab but I just wanted to know if somebody else tried this option before.

Firstable I have to said that I received a brand new 3495 Cisco ISE with version 1.3.0.876 already installed on it BUT my deployment is running 1.2.1.198 patch 3 so I had to downgrade that box.
Hi Saurav, using Rufus did NOT work. I got an installation error so I found that using DAEMON TOOL Lite (trial version), I created a virtual DVD drive on my Win 7 Laptop which pointed to the ISO for version 1.2.1.198. Then I could make the downgrade with no issues. This is a Cisco Appliance not VM.
I think the procedure indicated by cisco in the following link is INCOMPLETE:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/installation_guide/ise_ig.pdf
I will post some additional screenshots required on that link when you are using CIMC and upgrading/downgrading the ISE using External/Virtual DVD.
Important to say that I found this mechanism using Virtual DVD the easiest one instead of the bootable flash drive.

Creating Recovery Media using USB Flash Drive for Windows 8.1

I followed all the instructions to create a USB Flash Drive Recovery Media (insert 16 GB USB Flash Drive or >) and it said it will be created now (after I clicked on Create), however the next screen said to insert > 7.5 GB flash drive, then it said it was cancelled. I was attempting to use a San Disk Flash Drive and I am wondering if it is because it has some time of application on it. I was under the understanding that it would just "delete/erase" this (format it) and then create it, but it wouldn't. Any suggestions?

In Windows 8, one can create a "recovery drive" (called a System Repair Disc in Windows 7) that does not contain the recovery partition. (When you install Windows 8 yourself, there is no recovery partition.) It contains just the recovery environment.
Create a USB recovery drive [edited to repair the link]
Not sure what Shirley did, because it shouldn't take even that much space.
-Jerry

"No bootable devices" screen after Windows 7 Boot Camp failure.

As a lifetime Windows user, I thought that it would not be such a bad idea to install Windows 7 via Boot Camp Assistant. The process went smoothly until I reached the 3rd and final section of the procedure titled "Install Windows 7 or Later Version." I adjusted the MacOS and Windows partitions and proceeded to the final reboot. It is then where I was greeted with a Windows 7 screen tht stated something along the lines of "No bootable devices. Insert boot disc and try again." I have tried the Boot Camp Assistant (Same exact steps I used initially) and have yet to defeat the dreaded No Bootable Devices screen. I would really enjoy having Windows on my device so any help would be GREATLY appreciated. Thank you!

Hmm, I had an 8 GB flash drive connected to the compter at all times. When just using the "Install Windows 7 or later version" feature, shouldn't the flash drive be conncected throughout the duration of the procedure? And I may not be using the correct vocabulary but when I was referring to "adjusting the partitions" I meant the section of the procedure where the user selects how much hard disk drive space is granted to each OS. The response is much appreciated!

How to change FAT to NFTS for Windows 7 Boot Camp How to change Fat to NFTS on BootCamp for Windows 7

When I try to start BootCamp for Windows 7, I cannot change FAT to NTFS. I have created CDS for BootCamp upgrades 3.1 3.2 and 3.3.
Can't use them with Windows 7 disc in player. What to do?

Boot Camp creates a partition for you to install Windows into. Typically if you chose a size less than 32GB it will initially be FAT32, if bigger it will be NTFS. However what it is, is rather irrelevant. When you install Windows 7 it only allows using NTFS for a boot drive and it will automatically reformat that partition to NTFS if needed.

How do I get the latest drivers for windows 7 boot camp install?

I have a 24" mac early 2009. I had windows xp installed on a partition using an early edition of boot camp. I had to reformat my mac and so I purchased windows 7 home premium oem edition. When I try to install and copy boot camp drives to a 32 gb usb drive I get a message that Apple does not have drivers for that.

find your machine and OS here, manually dl the pkg
http://support.apple.com/kb/ht5634

USB ports/drives in windows with boot camp?

Windows (explorer) in Boot Camp does not recognize any usb ports/drives on my new iMAC (mountain Lion). Got the MAC 6 days ago - installed a new windows 7 package using boot camp with the (optional) usb superdrive drive. I have reinstalled (repaired) the windows support software - no change. BTW, after installing windows 7 I downloaded all updates, 140+, my windows, os X, and boot camp are up to date. Any suggestions? Thanks........jam

Did you download and install teh Windows support software which includes all the necessary Windows drivers for your computer?

Updating drivers for Windows 8 boot camp

Hi there,
I just installed the full release version of Windows 8 (available through my University) in boot camp. However, the drivers for several devices aren't working properly and should be updated. My question is, if I update the drivers so that the devices are compatable with Windows 8, will the drivers then be mismatched when I revert back to OSX?
Thank you.

Sorry, didn't realize that there was a boot camp community - probably a better place for my question. I will repost there. https://discussions.apple.com/message/19847211#19847211

How to create bootable USB drive for a PC on a Mac?

So in short I have a full PC build and a copy of Windows 7, but no optical drive to run the Windows 7 disk on, so I'm going to need to boot from a USB and the only means I have of creating a bootable USB is my Macbook running Yosemite.
So my question is how do I go about doing this? Please tell me it's as easy as selecting 'Create a Windows 7 or later version install disk' in Bootcamp

On a Mac create an ISO from the DVD and put it in a folder. Run BCA (Bootcamp Assistant) and use it to create a USB2 which will contain both the ISO and BC drivers. Uncheck the last "Install/Remove..." option, if you do not intend to install Windows on Mac.
Macs have no read-write NTFS drivers (Apple provides a read-only drivers), so the partition on Macs created by BCA is FAT, which is converted by the Windows installer to NTFS.
Please also see https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2 and http://imgur.com/a/DuGxr#0.
The USB2 has an AutoUnattend.xml which will silently install BC drivers, but these drivers are intended for Macs to support Mac-specific hardware.

Making a bootable USB Drive for Windows 8 Release Candidate; How To?

Hello everyone,
I am in the process of building a Windows PC and I need to make a bootable USB Thumb Drive to Install the Windows 8 Release Candidate on. The only problem is when I go into the restore section of Disk Utility it always comes up with either of these errors:
Thanks in advance,
Sean.

I have created PC bootable USB's on Mac OS X before but I am having trouble finding the instructions to duplicate that. It's been a while. It's not impossible though.

Wifi under windows 7 boot camp keeps dying

I have been running windows 7 64 bit under Boot Camp for just under a week, and last night have started to have some pretty serious issues with the built in wifi.
Periodically, without any consistent cause, when I am booted into Windows 7, my internet connection begins to degrade. Not disconnect or anything, just taking on like 60% packet loss or more, pings to both my default gateway (the wifi router) as well as to anything further out on the internet. My ipad, iphone, macbook pro are all fine and able to use the internet at the same time without issue, its only the imac booted into Windows 7. I can reboot with no change, still completely unusable (unable to load even a single web page) for Windows 7. reboot to OSX, no issues. Its not the router, or the ISP, its JUST when I'm in win7 using wifi. I've changed IPs, used a static DNS, measured wifi, etc. I was using this setup for almost a week before the issues started, and I'm assuming its something wrong with Windows7. Fully patched and up to date, both OSX and Win7.
I finally figured out that I can temporarily fix the problem by resetting the driver for the wifi interface under the Network Adaptor troubleshoot wizard in Windows, this buys me between 5 minutes to half an hour before the issue starts up again. Nothing else I've found will fix the issue even temporarily.
I finally ran a 50 ft ethernet cable from the imac to the router and this has for now solved the intermittent issue, but its not sustainable this way as I cannot leave the cords like this. But clearly there seems to be an issue with the wifi driver in windows that boot camp is using.
Can anyone provide some suggestions of what to look for within windows or a way to debug this more directly? I used the BootCamp assistant to burn a DVD of drivers at install time and I believe they were the most recent versions, but not sure how to check further. Device manager reports I am using the Atheros AR938x Wireless adaptor, and this is a mid-2011 27" iMac running Lion.

I'm having the same problem. Wifi loses connection after 5-ish minutes.
Wondering if it's an issue with the 802.11n drivers...? Seems a little more stable on the "g" networks.
This has been happening since the latest OS X update. I have a mid-2010 Macbook Pro 15".

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.

Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive.

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson

Create bootable flash drive for Windows 8 in Boot Camp

Similar Messages

Maybe you are looking for