Create Data Guard Using ASM Managed RMAN backup
we have an oracle database 11.1.0.7 working on Windows server 2003 (64bit). The storage in ASM managed (same 11.1.0.7). Our total database size is 4TB.
I will have to create a physical standby database (Data Guard) of this instance. Now I am having issues on how to transport my RMAN backup pieces (which is also ASM managed).
I cannot do an over the network RMAN backup because it will take months to complete.
We have external 4 hard disks (2 TB each). But my RMAN backup pieces are ASM in format.
Any ideas on how to easily create a data guard in this set up.
TheAlchemist wrote:
can you provide us any clear steps....Hope you asked for Restoring from backups.
1) Prepare PFILE and put in nomount status.
2) Restore standby controlfile
RMAN> restore standby controlfile from '+DG/...'
3) Mount controlfile
SQL> alter database mount standby database;
4) Restore database.
If you are restoring into another diskgroups, then use as below.
RUN {
SET NEWNAME FOR DATAFILE 1 TO '+Dg1/....';
SET NEWNAME FOR DATAFILE 2 TO "+Dg1/...';
RESTORE DATABASE
If same diskgroup you want to use then, just give RMAN> restore database;
After successful restore
5) Start MRP
SQL> alter database recover managed standby database disconnect from session;
Similar Messages
-
Oracle11g R2 Active Data guard using ASM Problem?
I have configured oracle11g r2 RAC on 2 notes using ASM Grid ( OS unix).
RAC is up and running.
Now I am configuring Active data Guard.
Under grid user instance +ASM and listener is running.
Under oracle user static listener is running.
All disk is mounted.
Oracle RAC and Data Guard directory and structure I have keeped same.
Now my problem is below:
$ ./rman target sys/HPinvent123nbl@dcpdb AUXILIARY sys/HPinvent123nbl@drpdb
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Jan 16 16:28:32 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DCPDB (DBID=316773134)
connected to auxiliary database: DRPDB (not mounted)
RMAN> duplicate target database for standby from active database;
Starting Duplicate Db at 16-JAN-13
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=5644 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u02/app/oracle/product/11.2.0/dbhome_1/dbs/orapwdcpdb1' auxiliary format
'/u02/app/oracle/product/11.2.0/dbhome_1/dbs/orapwdrpdb' ;
executing Memory Script
Starting backup at 16-JAN-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1897 instance=dcpdb1 device type=DISK
Finished backup at 16-JAN-13
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 01/16/2013 16:28:48
RMAN-06136: ORACLE error from auxiliary database: ORA-00200: control file could not be created
ORA-00202: control file: '+data'
ORA-17502: ksfdcre:4 Failed to create file +data
ORA-15001: diskgroup "DATA" does not exist or is not mounted
ORA-15055: unable to connect to ASM instance
ORA-01031: insufficient privileges
RMAN>
Please help.\
Thanks
Solaimanroot@drpdb1 []# id oracle
uid=108(oracle) gid=700(oinstall) groups=701(dba)
root@drpdb1 []# id grid
uid=109(grid) gid=700(oinstall) groups=701(dba),702(asmdba)
Edited by: 876149 on Jan 16, 2013 3:19 AM -
Create data guard using grid control 10gR3?
Has anyone been able to create a data guard of 10g R2 (10.2.0.3 dbs) using Grid Control 10gR3?
My creation stopped on cloning the standby db step. And i had to finish it manually but i'm just wondering if it has worked for anyone else?One step further. I enabled debug tracing for the agent and noticed that the creation of the windows service causes an error.
-: Thu Sep 27 10:14:53 2007: DEBUG: clone_util.runOradim(): Running oradim to install service for dg2
-: Thu Sep 27 10:14:53 2007: DEBUG: clone_util.runOradim(): Command: D:\oracle\product\10.2.0\db_1\bin\oradim.exe -NEW -SID dg2
-: Thu Sep 27 10:14:53 2007: DEBUG: db_common.tempLocFallback(): Test filename: D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/\test_temp_location.2976
-: Thu Sep 27 10:14:53 2007: DEBUG: db_common.removeFile(): To remove file D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/\test_temp_location.2976
-: Thu Sep 27 10:14:53 2007: DEBUG: db_common.tempLocFallback(): Tested TEMP location: D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/
-: Thu Sep 27 10:14:53 2007: DEBUG: clone_util.runOradim(): Output file: D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/\dbclone.2976
-: Thu Sep 27 10:14:53 2007: ERROR: clone_util.runOradim(): D:\oracle\product\10.2.0\db_1\bin\oradim.exe -NEW -SID dg2:
The trace refers to file D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/\dbclone.2976 :
DIM-00019: create service error
O/S-Error: (OS 1057) The account name is invalid or does not exist, or the password is invalid for the account name specified.
Although the other steps complete succesfully (using the same credentials), it fails creating the service. Don't know why, yet... -
How to create a "blueprint" using solution manager?!!
I have been asked to create a 'blueprint" using solution manager!! I have absolutely no clue how this can be achieved using solution manager!! Please guide me on what is to be done.Would appreciate if you donot give me links of help.sap as the same is not making sense to me.
I have to create a blueprint for 20 countries of SAP reports available for FICO. Some of these reports are country specific while others are generic.Hi Suchita,
You can create blueprint document using SOLAR01 transcation, provided you must have included all the organizational data, business process, master data,,
Follow the path
transaction SOLAR01->Business Blueprint-> Generate Blueprint
You must have created a solution and a project assigned to that solution also.
further clarifications feel to post the query
regards
Naveen
Edited by: Naveen kumar Palanichamy on Jan 2, 2008 7:16 AM -
Unable to create new query using query manager
Hi friends,
I have been trying to create a query using query manager for couple of hours but still not able to.I am following the instructions given in oracle Peopletools 8.52 : Peoplesoft query
Chapter - creating new queries.
Below are the steps I am going through to create new query:
Step - I open the component Reporting Tools-> Query->Query Manager , I don't get the tabbed pages one for search an existing query and another for create new query.
Please follow this link to see how the page is displayed in first step:
http://uploadpic.org/v.php?img=EvMvVAXX1E
Step 2 - When I click on create new query link, I am redirected to a page where it asks for record name to add in the query. But, even this page is not displayed as how it supposed to be
http://uploadpic.org/v.php?img=GzHh3f6krU
Step 3 - Following the above step, when I click on Person record to add into my query I am asked to select the fields that I want to display in the output.
But I somehow do not get the proper tabbed pages where individual pages are there to add the attributes to complete the query like adding multiple records, fields, query, expressions, prompt...etc
http://uploadpic.org/v.php?img=Wbbla3Q3jE
I am neither able to select multiple records in my query nor able to customize my query to get the desired results.
Below is the query that I want to create using query manager:
SELECT P.EMPLID,P.BIRTHDATE, N.NAME, A.ADDRESS1, A.ADDRESS2, A.CITY
FROM PS_PERSON P, PS_NAMES N, PS_ADDRESSES A
WHERE P.EMPLID = N.EMPLID AND
N.EMPLID = A.EMPLID AND
P.BIRTHDATE BETWEEN to_date('1990/1/1','yyyy/mm/dd') and to_date('1991/1/1','yyyy/mm/dd');Hi,
As I cannot access your screenshot by the blocking of company firewall rules.
I'm guessing currently you are using PT 8.52.00 version, correct?
This should be a bug, that you need to apply the 8.52.0X patch, not sure which patch fix this, you can apply the latest one to solve this issue for no tab page of query manager. (PT 8.52.06)
Hope this helps.
Thanks,
Saxon SI -
Create data models using interactive reporting
Hey guys,
I was wondering how you create data models using interactive reporting. An simple example would be great? I would really appreciate if I could get an answer.
Also, I wanted to understand a real world situation that you guys might have faced with creating data models, etc...thanks a ton :-)
-- AdiYour question is not that much clear on what you are asking for.
But for reference please have a look at the below doc which explain the Integration with IR and webanalysis what you require.
IR and WebAnalysis with Essbase
Thanks,
~KKT~ -
How to find the compression algorithm used on a RMAN Backup
I have list of backups taken using different compression alogrithms. I need to query and find out the compression algorithm used on existing RMAN Backup. I tried querying the view V$RMAN_BACKUP_JOB_DETAILS.
For Example I ran script below for backing up database with compressed backupsets;
On RMAN
connect target /
connect catalog rman/sqw1298@rcat
set COMPRESSION ALGORITHM 'HIGH'
backup filesperset 1 format '<%d_%s:%t:%p:%f>.df' incremental level 0 database;Edited by: Sivaprasad S on Sep 1, 2012 12:32 AM
Edited by: Sivaprasad S on Sep 1, 2012 12:36 AMI used the query below to get the RMAN backup details, here I am missing detail of compression algorithm
SELECT SESSION_KEY, INPUT_TYPE, STATUS,
TO_CHAR(START_TIME,'mm/dd/yy hh24:mi') start_time,
TO_CHAR(END_TIME,'mm/dd/yy hh24:mi') end_time,
ELAPSED_SECONDS/3600 hrs,
COMPRESSION_RATIO ,
INPUT_BYTES_DISPLAY, OUTPUT_BYTES_DISPLAY, TIME_TAKEN_DISPLAY
FROM V$RMAN_BACKUP_JOB_DETAILS
ORDER BY SESSION_KEY;Output
SESSION_KEY INPUT_TYPE STATUS START_TIME END_TIME HRS COMPRESSION_RATIO INPUT_BYTE OUTPUT_BYTES_DI TIME_TAKEN_DISP
417 DB INCR COMPLETED 8/23/2012 16:01 8/23/2012 16:33 0.529444444 1.06917899 244.67G 228.84G 0:31:46
423 DB INCR COMPLETED 8/23/2012 16:43 8/23/2012 17:14 0.510277778 1.0692043 244.59G 228.76G 0:30:37
435 DB INCR COMPLETED 8/24/2012 11:39 8/24/2012 12:13 0.571666667 1.06899247 244.64G 228.85G 0:34:18
441 DB INCR COMPLETED 8/24/2012 13:52 8/24/2012 14:23 0.511666667 1.0690053 244.60G 228.81G 0:30:42
447 DB INCR COMPLETED 8/24/2012 16:30 8/24/2012 16:58 0.467222222 2609.07178 244.60G 96.00M 0:28:02
457 DB INCR COMPLETED 8/25/2012 12:30 8/25/2012 13:01 0.527222222 1.06896188 244.68G 228.90G 0:31:38
467 DB INCR COMPLETED 8/26/2012 16:30 8/26/2012 16:56 0.4325 739.556573 244.65G 338.75M 0:25:57On the output I need to have the compression algorithm used for each backup.
Hope this is crystal clear now. -
Error while creating data source using Oracle Enterprise Manager 10g
Hi,
I have deployed my web application developed on OC4J 9.0.4 stand alone (Win2K) to an integrated OC4J version(Solaris) using Oracle Enterprise Manager 10g.
However, I get an error when I try to create a data source.
The data source I want to create would have the following parameters (as seen in data-sources.xml on the stand alone version):
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="TestDS"
location="jdbc/OracleCoreDS"
xa-location="jdbc/xa/OracleXADS"
ejb-location="jdbc/TestDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
url="jdbc:oracle:thin:@hostName:1521:test"
username="user"
password="password"
min-connections="5"
max-connections="20"
inactivity-timeout="30"
/>
When I entered the above data on the Enterprise Manager Data Sources page, I got the following error:
quote:
Error saving Data Source Properties. - Entity et="system";ei="0",et="application";ei="48",et="data-sources";ei="167":child:data-sourcechild key:location:jdbc/OracleCoreDS; class:com.evermind.sql.DriverManagerDataSource; already exists in the repository. Resolution: Please check the code base.
unquote:
Could somebody tell me what I'm doing wrong ?
I tried to manually edit the data-sources.xml file but the data source didn't show up on the Enterprise Manager.
I'm using a new OC4J instance (on the Solaris machine) for my applications. Is the data source error related to this?
Any help will be greatly appreciated.
Thanks,
ShyamThanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="OracleDS"
location="jdbc/OracleCoreDS"
xa-location="jdbc/xa/OracleXADS"
ejb-location="jdbc/OracleDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="scott"
password="->pwForScott"
url="jdbc:oracle:thin:@localhost:1521:oracle"
inactivity-timeout="30"
/>
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam -
RMAN script failed while creating Data Guard 11g
Hi Friends,
I am creating Physical Standby (11g) using RMAN (ACTIVE) on windows using the doc : Step by Step Guide on Creating Physical Standby Using RMAN DUPLICATE...FROM ACTIVE DATABASE [ID 1075908.1]
The folder structure on Primary DB and on Physical Standby is totally different.
while executing RMAN script i got errors for lot of locations and i specified the proper location in RMAN script itself (ex set diagnostic_dest = 'c:\app\' , set db_recovery_file_dest='C:\app\flash_recovery_area')
Location of control files on Primary DB:
D:\oradata\MESSTG\CONTROL01.CTL
D:\oradata\flash_recovery\messtg\MESSTG\CONTROL02.CTL
Location of control files (planned) on Physical Standby DB:
C:\app\oradata\MESSTDBY\CONTROL01.CTL
C:\app\flash_recovery_area\MESSTDBY\CONTROL02.CTL
How to specify control file location of Physical standby in set control_files?
Also i have 2 control files on Primary DB so do i need to specify both the control files , if so how?
I tried different combination in RMAN script but all are failed:
set control_files='D:\oradata\MESSTG\CONTROL01.CTL','C:\app\oradata\MESSTDBY\CONTROL01.CTL'
RMAN Error is :
while using set control_files=: C:\app\oradata\MESSTDBY\CONTROL01.CTL
contents of Memory Script:
backup as copy current controlfile for standby auxiliary format 'D:\ORADATA\MESSTG\CONTROL01.CTL';
restore clone controlfile to 'C:\APP\ORADATA\MESSTDBY\CONTROL01.CTL' from
'D:\ORADATA\MESSTG\CONTROL01.CTL';
executing Memory Script
Starting backup at 16-APR-13
channel prmy1: starting datafile copy
copying standby control file
released channel: prmy1
released channel: prmy2
released channel: prmy3
released channel: prmy4
released channel: stby
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 04/16/2013 14:18:41
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on prmy1 channel at 04/16/2013 14:18:41
ORA-17628: Oracle error 19505 returned by remote Oracle server
RMAN>
Error 2)
while using set control_files='D:\oradata\MESSTG\CONTROL01.CTL','C:\app\oradata\MESSTDBY\CONTROL01.CTL'
contents of Memory Script:
backup as copy current controlfile for standby auxiliary format 'D:\ORADATA\MESSTG\CONTROL01.CTL';
executing Memory Script
Starting backup at 16-APR-13
channel prmy1: starting datafile copy
copying standby control file
released channel: prmy1
released channel: prmy2
released channel: prmy3
released channel: prmy4
released channel: stby
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 04/16/2013 13:22:33
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on prmy1 channel at 04/16/2013 13:22:33
ORA-17628: Oracle error 19505 returned by remote Oracle server
RMAN>
Regards,
DBHi,
Can you paste here you rman script ?
I think following script can help you.
duplicate target database for standby
from active database
spfile
set "control_files"="d:\oradata\<standbydbuniquename>\CONTROL01.CTL"
set "db_name"="<DBNAME>"
set "db_unique_name"="<STANBYD DBA UNIQUENAME>"
set "db_file_name_convert"="C:\app\oracle\oradata\<dbname>","d:\oradata\<standbydbuniquename>"
set "log_file_name_convert"="C:\app\oracle\oradata\<dbname>","d:\oradata\<standbydbuniquename>"
set "db_recovery_file_dest"="D:\fast_recovery_area"
nofilenamecheck;C:\app\oracle\oradata\<dbname> - it is primary database dafiles location
D:\oradata\<standbydbuniquename> - it is standby database datafile location.
Don't forget creation of diagnostinc dests.
Regards
Mahir M. Quluzade -
RAC 10gr2 using ASM for RMAN a cluster file system or a Local directory
The environment is composed of a RAC with 2 nodes using ASM. I have to determine what design is better for Backup and Recovery with RMAN. The backups are going to be saved to disk only. The database is only transactional and small in size
I am not sure how to create a cluster file system or if it is better to use a local directory. What's the benefit of having a recovery catalog that is optional to the database?
I very much appreciate your advice and recommendation, TerryArf,
I am new to RAC. I analyzed Alejandro's script. He is main connection is to the first instance; then through sql*plus, he gets connected to the second instance. he exits the second instance and starts with RMAN backup to the database . Therefore the backup to the database is done from the first instance.
I do not see where he setenv again to change to the second instance to run RMAN to backup the second instance. It looks to me that the backup is only done to the first instance, but not to the second instance. I may be wrong, but I do not see the second instance backup.
Kindly, I request your assistance on the steps/connection to backup the second instance. Thank you so much!! Terry -
Creating a standbay database from an rman backup
hi,
I have a situation that a standby database has a large gap in archive log files, the primary server does not now have those files. I understand that you can create a standby from an rman backup of the primary but all reading I have done shows thatn you have to have a recovery catalog to carry this out. The system I am on does not have such a catalog so is there any other way to do this?
regards
AlanRequirement 'You must have a recovery catalog in a standby requirement' is a little bit misleading. In fact you can do what you want : creating a standby from RMAN backups without having a recovery catalog. 'Duplicate target database for standby' does not require a connection to a recovery catalog.
You need mandatorily a recovery catalog, when you plan to take backups from the standby later on in order to free the primary from this task. The reason for that is it's not possible to transfer backup records from the standby controlfiles to the primary ones directly. After a backup on the standby you resync the catalog with the standby controlfile. Then you connect to the catalog and the primary,resync again and have actual backup informations in the primary controlfiles. When there's a media recovery problem, you easily can restore/recover the primary.
Werner -
Cannot create data source using custom third-party driver
Hi,
I've just installed Weblogic Server 10.3.6 and I'm getting problems creating a generic data source using my own third party jdbc driver which I had no problems doing in Weblogic Server 10.0; this is what I did in 10.0;
before starting server i put my driver jar file (and any jar files it needed) in the lib folder of the domain user project which weblogic appends to the classpath during server startup
inside weblogic console -
1. first page - provided a data source name and jndi name and selected 'other' for database type
2. second page - selected 'other' for jdbc driver
3. third page - deselected the global transactions
4. fourth page - provided database name, username, host name, port, and password.
5. fifth page - provided driver class, url, database user name and password (didn't bother with the test)
6. Selected target server
I then saved and activated changed and was done.
This what I did for 10.3.6
did the same thing I did for 10.0 before server start up
inside weblogic console -
1. first page - provided data source name and jndi name and selected 'other' for database type
2. second page - selected 'other' for jdbc driver
3. third page - deselected the support global transactions
4. fourth page - here's where things are different - page only asked for database username and password, which I give.
One this page I get a criptic error saying 'errors must be corrected before proceeding' - no other message as to what these errors might be either in the console or the cmd window of the server. I tried making changes to the provider authenticiation of the security realm but no luck. I tried following password creation requirements, I even tried proceeding to the next page without entering anything on this page, all no luck. I have no idea what's going on.
Hope someone can help.
Sam.I've fixed the class issue but am struggling a bit with SQL Server authentication. I'm running in mixed mode (originally set to Windows authentication but I've modified the security setting), I've enabled TCP/IP and Named Pipes, I've created a user (who I can log in to SQL Server Mgmt Studio successfully with), but still get a connection refused error.
Any insight? Thanks. -
Problem in Creating data for HCM Talent management System Risk of Loss data
Hello there,
I am trying to enter data for Risk of Loss in HR HCM TMS. Does anybody know in which SAP portal Release this functionality is delivered i have SAP portal 7.00 with JEECOR and JEE and with SP 16. i think all the new functionality delivered in SAP ECC6 EHP4 is supported in SAP portal 7.00 with NW EHP1. Can anybody help in configuring risk of loss in MSS package. I will really appreciate your help in the same. or any useful link for Portal configuration specific to HCM.
Thanks
MandeepHi mani,
configuring Risks is part of the talent management suite, talent assessment.
check out this documentation on SAP help:
http://help.sap.com/erp2005_ehp_04/helpdata/en/b5/ae52db46094946933b2c4dd6cb5ae7/content.htm
Under SPRO you will want to use talent management -> talent assessment
there are however a number of basic things that should be looked at under talent management -> basic settings. Particularly for the "assessment landing" page to work it involves integration between the central person and the SAP business partner. This is the first step in spro, under tm -> basic settings.
Best Regards,
Michael
Edited by: Michael L Pappis on Aug 10, 2010 12:47 AM -
Oracle11g heterogenous data guard Linux-ASM primary, Windows-Filesystem standby
Is it possible to setup a standby database on (Windows 64bit) OS filesystem with 32GB datafile limit that syncs with a primary database on (Linux 64bit) ASM that has datafiles that are larger than 32GB.
There is a Linux-ASM standby in place, this will be an additional standby, to be used as a reporting database using Oracle11g snapshot standby
I have used datapump to export-import from Linux-ASM to Windows-filesystem by precreating additional 32GB datafiles in the Windows database, the import works, it takes too long to import for a reporting database
it's not clear to me how to synchronize the new standby without using RMAN full or incremental backup-restores
Any suggestions or suggested document IDs are welcome!
Thank you,
Drew SalisburyHi Drew,
Standby files have to be the same size/distribution as the primary - that can be differnet os, in ASM etc but they have to be the same number and size.
There are some ways to speed up import - parallel etc but in a big database there is always a lot of time lost in index building post data load.
How feasible is it to shrink the datafiles in wondows nack to 32GB......?
Can you set up ASM on windows?
You could use streams or something to replicate and keep the copy you created up to date rather than using physical standby?
Cheers,
Rich -
Create key mapping using import manager for lookup table FROM EXCEL file
hello,
i would like create key mapping while importing the values via excel file.
the source file containing the key, but how do i map it to the lookup table?
the properties of the table has enable the creation of mapping key. but during the mapping in import manager, i cant find any way to map the key mapping..
eg
lookup table contains:
Material Group
Code
excel file contain
MatGroup1 Code System
Thanks!
ShantiHi Shanti,
Assuming you have already defined below listed points
1) Key Mapping "Yes" to your lookup table in MDM Console
2) Created a New Remote System in MDM console
3) proper rights for your account for updating the remote key values in to data manager through import manager.
Your sample file can have Material Group and Code alone which can be exported from Data Manager by File-> Export To -> Excel, if you have data already in Data Manager.
Open your sample file through Import Manager by selecting the remote system for which you want to import the Key mapping.
(Do Not select MDM as Remote System, which do not allows you to maintain key mapping values) and also the file type as Excel
Now select your Soruce and Destination tables, under the destination fields you will be seeing a new field called [Remote Key]
Map you source and destination fields correspondingly and Clone your source field code by right clicking on code in the source hierarchy and map it to Remote Key if you want the code to be in the remote key values.
And in the matching criteria select destination field code as a Matching field and change the default import action to Update NULL fields or UPDATED MAPPED FIELDS as required,
After sucessfull import you can check the Remote Key values in Data Manager.
Hope this helps
Thanks
Sowseel
Maybe you are looking for
-
Hotmail email account no longer synching with S3
I don't know what happened or changed - but one day Tuesday the 13th, it was working fine and then no more email. When I go on my other computers no problems - just the S3. I noticed in the settings the Sync email box is checked but grayed out. I
-
Drill Down facility in ALV Report
Hi Guys, I want to provide Drill down facility based on columns in ALV Report (ALV Web Dynpro Report). Please let me know if you have any sample code or guidelines for this. Thanks, Pradeep
-
Keywords and new Iphoto Library
Is there a simple way to delete/remove keywords from the photos in my new library? For some reason (could be my fault) every photo has the same five keywords, I delete them and then they reappear. I've tried quitting Iphoto, opening the old photo lib
-
Compressor and Applescript not working
Hi everyone, I am trying to run an AppleScript after a processing job in Compressor. I have tested it and know for a fact that the script runs fine, as I can manually run it from the Finder. When I use the option in Compressor (under the Actions tab)
-
I am saving StarOffice files and noticed the extension is not there and therefore I can not double-click on the file to open it, by the way, running Vista.