Create database table using Forms Developer 6/6i without using SQL*Plus
hello there,
I need help in creating tables in Oracle using Forms Developer 6/6i without using SQL*Plus interface.
your help is appreciated
email: [email protected]
please use Forms_ddl package to create a table dynamically
from the Developer6/6i.
you can check the success or failure by using the
form_success builtin.
if u want to avoid using the Forms_ddl package
use stored procedure or create a sql querry record group.
regards
sriram.
Similar Messages
-
Create temporary Tables using SQL
Hello,
I'm wondering if SAP allows the creation of new Tables without SDK objects,
I want to create temporary tables using SQL scripts an compile them when an specific addon is connected and erase them when the addon disconnects,
Do you think this is allowed?.
thanks,
GabrielaYou could always have a second DB to create your temp tables in. This is the way I've done this, as well as created my own views and stored procedures in it. No updating of the primary table necessary. The way I named things was:
Company_DB - Company Database
Company_DB-Extern - My own stuff
Then, in sap, you can just do [Company_DB-Extern]..Object to call it, or you do the same from withing your project. -
Create database table using Forms Developer 6/6i
Happy New Year everyone,
I hope your New Year is a happy one.
Listen, I am trying to create tables in Forme Builders without using SQL*Plus but it won't create the table in the database because I believe that the table it is created as a control block not as a data block.
Can someone help me on this my email is [email protected] your help is appreciated.I'm not sure I understand your question.
If you want to create a table in the database, you need to use the Database Objects node. If you do it in the block node, then you are creating a block in the Form, not a table in the database.
Regards,
Robin Zimmermann
Forms Product Management -
Populating table using SQL*Plus
Hi,
I am trying to populate my destination table from the source using SQL*Plus. I keep get error message. The source table has 6 columns and the destination table has 11 columns. Data_type are different in both table. The following is my script and the output of the script:
insert into bim_expense_element
(select table_type_id, table_code_desc,
table_value_4, table_value_6,
table_description_1 | | table_description_2
from edim_expense_element)
SQL> /
insert into bim_expense_element
ERROR at line 1:
ORA-00947: not enough values
Please let me know what I did wrong. Thanks.
EstherHi Esther,
You need to tell to Oracle what columns to fill in your insert like this:
insert into bim_expense_element(bim_type_id, bim_code_desc, bim_table_value4, bim_table_value6, bim_description)
select table_type_id, table_code_desc,
table_value_4, table_value_6,
table_description_1 | | table_description_2
from edim_expense_element
If the fields aren't of the same type you'll need to convert.
null -
Question about creating new tables using SQL script in WebLogic Server
Hi,
I am new to WebLogic and I am following a book Java EE Development with Eclipse published by PACKT Publishing to learn
Java EE. I have installed Oracle Enterprise Pack for Eclipse on the PC and I am able to log into the WebLogic Server Administration Console
and set up a Data Source. However the next step is to create tables for the database. The book says that the tables can be created using
SQL script run from the SQL command line.
I cannot see any way of inputting SQL script into the WebLogic Server Admistration Console. Aslo there is no SQL Command line in DOS.
Thanks for your help.
Brian.Sounds like you are to run the scripts provided by a tutorial to create the tables, right? In that case, you may need to install an Oracle client to connect to your database. The client is automatically installed with the database, so if you have access to the server that hosts the database, you should be able to run SQLplus from there.
As far as I know, there is no way to run a script from the Admin Console. I could be wrong, however. -
How to create an object using sql*plus?
Hi,
I have tried to create an object , but after pressing enter key I could not get SQL command prompt or errors. How to come out from this? Could you help me to find what's wrong.
SQL> create type course as object(
2 course_no number(4),
3 title varchar(35),
4 credits number(1));
5
6
7
8
Thanks.Put a slash "/" at the end of the command:
CREATE TYPE course AS OBJECT (
course_no NUMBER (4),
title VARCHAR (35),
credits NUMBER (1)
/ -
Debugging procedure or packages using sql*plus reg
Dear all,
I am new to oracle, can any body provide me some information related to this below issues.
a) suppose i have created a procedure using sql*plus tool then next day i wanted to debug or modify my stored procedure.
Then what could approach using sql*plus
b) same case if we consider for packages then for any specific stored procedure or functions what would be the approach to debug or modify using sql*plus
yours cordination will be highly appreciate
Thanks n regards
LaxmanUsing SQL*Plus you can debug your stored pl/sql code only adding some "prints" in your code:
SQL> create or replace procedure test is
2 begin
3 dbms_output.put_line('starting...');
4 --do something here
5 dbms_output.put_line('done step 1');
6 --do something else here
7 dbms_output.put_line('end procedure...');
8 end;
9 /
Procedura creata.
SQL> set serverout on
SQL> exec test
starting...
done step 1
end procedure...
Procedura PL/SQL completata correttamente.Or writing logs in a log table:
SQL> create table logtab(ts timestamp(9),mess varchar2(4000));
Tabella creata.
SQL> create or replace procedure test is
2 begin
3 insert into logtab values(systimestamp,'starting...');
4 --do something here
5 insert into logtab values(systimestamp,'done step 1');
6 --do something else here
7 insert into logtab values(systimestamp,'end procedure...');
8 end;
9 /
Procedura creata.
SQL> exec test
Procedura PL/SQL completata correttamente.
SQL> col ts for a40
SQL> col mess for a40
SQL> select * from logtab;
TS MESS
25-DIC-09 15:33:13,656000000 starting...
25-DIC-09 15:33:13,656000000 done step 1
25-DIC-09 15:33:13,656000000 end procedure...Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com] -
Entries to the newly created database table directly using se 11.......
Hi all,
I had a query here... i just created a new database table using SE11 transaction.... was wondering if it is possible to directly enter values into the table in se11 itself....cause if some values already exists in the table we can add more using se11 itself..... but if its a new one then its not allowing us to put values... kindly help....
thanksHi,
We can enter the values in table. Follow the steps to add entries.
Open table in SE11 and goto "Display" mode.
Goto Utilities -> Table contents -> Create entries.
Now the screen will be opened for new entries. Before this your table settings should be "Delivery / Maintenance Allowed" needs to selected.
Regards,
Siva. -
I created a table using the ranking field and now I need to delete the "dots/buttons" and turn them into text fields, is this possible?
It sounds like what you are trying to do is edit the choices in a likert field to something other than the default radio button. This is not something that you can do in Formscentral at this time.
Andrew -
How to update field values in a database table using module pool prg?
hi
how to update field values in a database table using module pool prg?
we created a customized table, and we put 2 push buttons in screen painter update and display.
but update is not working?
data is enter into screen fields and to internal table, but it is not updated in database table.
thanks in adv
vidyaHI,
we already used the update statement. but its not working.
plz check this.
*& Module Pool ZCUST_CALL_REC
PROGRAM ZCUST_CALL_REC.
TABLES: ZCUST_CALL_REC,ZREMARKS.
data: v_kun_low like ZCUST_CALL_REC-kunnr ,
v_kun_high like ZCUST_CALL_REC-kunnr,
v_bud_low like ZCUST_CALL_REC-budat,
v_bud_high like ZCUST_CALL_REC-budat.
ranges r_kunnr for ZCUST_CALL_REC-kunnr .
ranges r_budat for zcust_call_rec-budat.
DATA: ITAB TYPE STANDARD TABLE OF ZCUST_CALL_REC WITH HEADER LINE,
JTAB TYPE STANDARD TABLE OF ZREMARKS WITH HEADER LINE.
*data:begin of itab occurs 0,
MANDT LIKE ZCUST_CALL_REC-MANDT,
kunnr like ZCUST_CALL_REC-kunnr,
budat like ZCUST_CALL_REC-budat,
code like ZCUST_CALL_REC-code,
remarks like ZCUST_CALL_REC-remarks,
end of itab.
*data:begin of Jtab occurs 0,
MANDT LIKE ZCUST_CALL_REC-MANDT,
kunnr like ZCUST_CALL_REC-kunnr,
budat like ZCUST_CALL_REC-budat,
code like ZCUST_CALL_REC-code,
remarks like ZCUST_CALL_REC-remarks,
end of Jtab.
CONTROLS:vcontrol TYPE TABLEVIEW USING SCREEN '9001'.
CONTROLS:vcontrol1 TYPE TABLEVIEW USING SCREEN '9002'.
*start-of-selection.
*& Module USER_COMMAND_9000 INPUT
text
MODULE USER_COMMAND_9000 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'ENQUIRY'.
perform multiple_selection.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9001'.
WHEN 'UPDATE'.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9002'.
perform update on commit.
WHEN 'DELETE'.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9002'.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
*& Module STATUS_9000 OUTPUT
text
MODULE STATUS_9000 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9001 INPUT
text
MODULE USER_COMMAND_9001 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
endcase.
ENDMODULE. " USER_COMMAND_9001 INPUT
*& Module STATUS_9001 OUTPUT
text
MODULE STATUS_9001 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
move itab-MANDT to zcust_call_rec-MANDT.
move itab-kunnr to zcust_call_rec-kunnr.
move itab-budat to zcust_call_rec-budat.
move itab-code to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
ENDMODULE. " STATUS_9001 OUTPUT
*& Module USER_COMMAND_9002 INPUT
text
module USER_COMMAND_9002 input.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'UPDATE'.
perform move_data.
UPDATE ZCUST_CALL_REC FROM TABLE ITAB.
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'RECORDS ARE UPDATED'.
ELSE.
MESSAGE E001(0) WITH 'RECORDS ARE NOT UPDATED'.
ENDIF.
WHEN 'DELETE'.
perform move_data.
DELETE ZCUST_CALL_REC FROM TABLE ITAB.
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'RECORDS ARE DELETED'.
ELSE.
MESSAGE E001(0) WITH 'RECORDS ARE NOT DELETED'.
ENDIF.
endcase.
endmodule. " USER_COMMAND_9002 INPUT
*& Module STATUS_9002 OUTPUT
text
module STATUS_9002 output.
SET PF-STATUS 'ZCUSTOMER1'.
SET TITLEBAR 'xxx'.
endmodule. " STATUS_9002 OUTPUT
*& Module update_table OUTPUT
text
module update_table output.
move itab-MANDT to zcust_call_rec-MANDT.
move itab-kunnr to zcust_call_rec-kunnr.
move itab-budat to zcust_call_rec-budat.
move itab-code to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
endmodule. " update_table OUTPUT
***Selection Data
FORM SELECT_DATA.
SELECT mandt kunnr budat code remarks FROM zcust_call_rec INTO
table itab
WHERE kunnr IN r_kunnr AND BUDAT IN R_BUDAT.
ENDFORM.
****append vendor code
FORM APPEND_CUSTOMER_CODE.
clear r_kunnr.
clear itab.
clear r_budat.
refresh r_kunnr.
refresh itab.
refresh r_kunnr.
IF r_kunnr IS INITIAL
AND NOT v_kun_low IS INITIAL
AND NOT v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_high
IMPORTING
OUTPUT = r_kunnr-high.
r_kunnr-option = 'BT'.
r_kunnr-sign = 'I'.
append r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND NOT v_kun_low IS INITIAL
AND v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
r_kunnr-SIGN = 'I'.
r_kunnr-OPTION = 'EQ'.
APPEND r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND v_kun_low IS INITIAL
AND NOT v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
r_kunnr-SIGN = 'I'.
r_kunnr-OPTION = 'EQ'.
APPEND r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND v_kun_low IS INITIAL
AND v_kun_high IS INITIAL.
IF SY-SUBRC = 0.
MESSAGE I003(0) WITH 'ENTER CUSTOMER NUMBER'.
CALL SCREEN '9000'.
ENDIF.
PERFORM V_BUDAT.
ENDIF.
ENDFORM.
FORM V_BUDAT.
IF R_BUDAT IS INITIAL
AND NOT v_BUD_low IS INITIAL
AND NOT v_BUD_high IS INITIAL.
r_budat-low = v_bud_low.
r_budat-high = v_bud_high.
r_budat-option = 'BT'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND NOT v_BUD_low IS INITIAL
AND v_BUD_high IS INITIAL.
r_budat-low = v_bud_low.
r_budat-high = v_bud_high.
r_budat-option = 'EQ'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND v_BUD_low IS INITIAL
AND NOT v_BUD_high IS INITIAL.
r_budat-HIGH = v_bud_HIGH.
r_budat-option = 'EQ'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND v_BUD_low IS INITIAL
AND v_BUD_high IS INITIAL.
IF SY-SUBRC = 0.
MESSAGE I002(0) WITH 'ENTER POSTING DATE'.
CALL SCREEN '9000'.
r_budat-low = ''.
r_budat-option = ''.
r_budat-sign = ''.
ENDIF.
ENDIF.
ENDFORM.
*& Form update
text
--> p1 text
<-- p2 text
form update .
commit work.
endform. " update
*& Form move_data
text
--> p1 text
<-- p2 text
form move_data .
clear itab.
refresh itab.
move-corresponding zcust_call_rec to itab.
MOVE ZCUST_CALL_REC-MANDT TO ITAB-MANDT.
MOVE ZCUST_CALL_REC-KUNNR TO ITAB-KUNNR.
MOVE ZCUST_CALL_REC-BUDAT TO ITAB-BUDAT.
MOVE ZCUST_CALL_REC-CODE TO ITAB-CODE.
MOVE ZCUST_CALL_REC-REMARKS TO ITAB-REMARKS.
APPEND ITAB.
delete itab where kunnr is initial.
endform. " move_data
thanks in adv
vidya -
How to create a table using polish
I am able to show all the database records in table form but i want to edit a particular cell of the table, how to do that. thanks in advance.
Cell as indipendant TLF should work, I have created my table using same approach and works fine for me ... this is where it is
http://apps.live-documents.com/docs/openWebDoc.do?docId=1480607
Regards
Raf -
Create statspack report using sql*developer
Hello,
While connecting with PERFSTAT user I can not create statspack report using SQL*Developer:
@?/rdbms/admin/awrrpt
Error starting at line 1 in command:
@?/rdbms/admin/awrrpt
Error report:
Unable to open file: "?/rdbms/admin/awrrpt.sql"
Actually, my problem or question is that how can PERFSTAT user can generate statspack reports from a Client side. What is the other way a non-dba can see the snapshots histroy and generate report (by using perfstat user ) while joing tables or using views?
Thanks a lot.
Best RegardsHi,
for awr reports @?/rdbms/admin/awrrpt (you need EE+Diagnostic Pack) there is a solution.
Grant execute dbms_workload_repository to <user>;
Grant select_catalog_role to <user>;
get all SNAP_IDs
SELECT TO_CHAR(s.startup_time,'YYYY.MM.DD HH24:MI:SS') INSTART_FMT,
di.instance_name INST_NAME,
di.db_name DB_NAME,
s.snap_id SNAP_ID,
TO_CHAR(s.end_interval_time,'YYYY.MM.DD HH24:MI:SS') SNAPDAT,
s.snap_level LVL
FROM dba_hist_snapshot s,
dba_hist_database_instance di
WHERE di.dbid = s.dbid
AND di.instance_number = s.instance_number
AND Di.Startup_Time = S.Startup_Time
ORDER BY snap_id desc;
Select * From Table(Sys.Dbms_Workload_Repository.Awr_Report_Html(DBID, 1, BEGIN_SNAP_ID, END_SNAP_ID));
For statspack i don't know a solutuion. I think the best idea is, create a job to make the statspack report on the server side and access it via external tables or mail them forward to you.
Best regards
Thomas -
How to create a table using subform if lifecycle designer 7.1 not availabl
hi,
plis tell me how to create a table because i am using adobe lifecycle 6.1 and in the library
there is no object for table..
also tell me that if i have adobe lifecycle designer then which is better option and why?
use table from library directly or create a table using subform...Hi Sweta,
Create the interface attributes of type string and xtring type.
Create node in the context of type graphics. bind the interface fields to the graphic node context element properties -
Graphic content, field of xzstring type and mimetype to be string/any char data type of suitable length.
In layout drag and drop the image field and bind it to the graphic element.
In yoour report programme-
do the code as berlow to pass the graphic data -
<i>CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
EXPORTING
p_object = 'GRAPHICS'
p_name = '<mime type graphic name>'
p_id = 'BMAP'
p_btype = 'BCOL' "BMON if monochrome
RECEIVING
p_bmp = w_binary
EXCEPTIONS
not_found = 1
internal_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.</i>
in the call <form function module>
pass the inerface values for
xstring (graphic field) to be w_binary (import parameter of the previous method)
and mime type to be 'image/bmp'.
This would work.
Hope fully you may be able to see a tutorial on this soon ;).
- anto. -
How to process each records in the derived table which i created using cte table using sql server
I want to process each row from the CTE table I created, how can I traverse from first row to second row and so on....
how to process each records in the derived table which i created using cte table using sql serverIdeally you would be doing a set based processing rather than traversing row by row as thats more efficient. To answer it specific to your scenario we may need more info. Can you explain with some sample data your exact requirement?
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page -
Steps to follow while creating Database table in notes or paperwork
what are the steps to follow while creating Database table in notes or paperwork
Thank you,
Regards,
Jagrut Bharatkumar Shuklahi,
1. Goto Transaction SE11.
2. Enter the table name to be created. It should start with a Y or Z.
3. Press Create
4. Enter the Short description for the table
5. Enter the Delivery class for the table. It can be 'A', 'C' or other.
6. In the Fields tab, specify the table fields and the corresponding data elements or the built-in data types.
7. If the table needs to be made a client-depenedent table, the first field should be MANDT.
8. Goto Technical settings of the table and sepcify the Data Class and Size for the table. Also, there u can specify if buffering for the table should be allowed or not.
9. Now, activate the table.
if helpful reward some points.
with regards,
Suresh Aluri.
Maybe you are looking for
-
Is there a maximum song length for the iPhone?
I have an audio bible that works fine in iTunes, my 20GB & 30GB iPods. However it will not play on my iPhone.
-
I have a HP Slatebook 2 in 1 that has a broken touch screen display. The screen still shows images but the touchscreen no longer works. I'd like to replace the it but I'm having trouble finding a local company in Denver CO. who can do this. I'm not
-
How can we set -up the condition type as per trip or per shipment document? Or maybe, set-up pricing per shipment route (and not per delivery).. What should be the calculation base of the condition type? I can't find "per shipment' but only per deliv
-
What if I forgot my security questions answer
What if I forgot my security answer
-
I have downloaded the PS CC and am a new member. However, the only place I can find the PS CC is in the install/uninstall part of the control panel. Where can I find it to launch?? It's not in programs etc.