Create Home Directory using VB Script

Hello All,
Did anybody is having VB script to create home directory.
I can create a folder on the local machine through VB script but I am not able to create a folder on the network share|(like \\servername\Users\%username%).
If anybody is having a sample code, please post it here.
Thanks in advance

nobody? :-(

Similar Messages

Create home directory using powershell

Hi Experts -
Currently AD 11.1.1.5 is deployed. The home directory is been prepopulated at the time of creation of AD account, and there is a custom task called updatehomedir which gets triggered on success response of create user.
The problem is, the customer has 40 domain controllers and if I use the OOTB process tasks, it fails to find the user and gives me an invalid structure error, meaning it is not able to find the user. So when the first request goes for creating the user, it picks up a random domain controller and if the home directory parameter is been sent in the creation request it fails. so, the post user creation task works fine.
The Ad connector creates the home directory with the full permissions to the user on that folder, and also it clears out all the existing permissions. By that, it does not inherits the container permissions. SR said, that it is an ER.
How do I implement it.
The approach that looks feasible is
1. Change the provision attribute mapping for homeDirectory to say customHomeDirectory
2. Disable the home directory update task
3. Call a powershell after creation action
4. In that powershell get the process form value, and run the creation of home directory with appropirate permissions.
And I cannot test it, as the only environment where i have folders is production...
-Thanks
Kunal Jain

After some decompilation I found this
DirectorySecurity dirSecurity = new DirectorySecurity();
PropertyValueCollection pvc = directoryEntry.Properties[ActiveDirectoryConnector.ATT_OBJECT_SID];
SecurityIdentifier sid = new SecurityIdentifier((byte[])pvc[0], 0);
dirSecurity.AddAccessRule(new FileSystemAccessRule(sid, FileSystemRights.FullControl, InheritanceFlags.ContainerInherit | InheritanceFlags.ObjectInherit, PropagationFlags.None, AccessControlType.Allow));
Directory.CreateDirectory(directoryName, dirSecurity);
Does this strip of the permissions of the file admins on the container. that is inheriting is not done????

How to create /home directory in a diferent disk ?

I installed Solaris 11-11-11 on a x4640 with 4 disks:
How to create /home directory in a diferent disk ?
Edited by: user1502 on Apr 25, 2012 1:51 PM

I'm confused. It looks like you already have /home configured:
<pre># zpool status
pool: home
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
home ONLINE 0 0 0
c4t3d0 ONLINE 0 0 0
errors: No known data errors
# zfs list
NAME USED AVAIL REFER MOUNTPOINT
home 86K 134G 32K /home
...</pre>
What is the problem? Looks like you already have /home configured. Are you sure automounter is not running?
Try this:
<pre>zfs set mountpoint=none home
rm -rf /home
zfs set mountpoint=/home home</pre>

Creating aVirtual directory Using java

Hai ,
I am Using windows XP Operating system, I know how to create a directory using java,
can you please suggest me a procedure to create a virtual(web share ) directory using java.
waiting for your reply
Thanks & Regards,
Naga Raju

Virtual Programmer is in the to share the directory
over the Internet.No, that's a file/web server. :) I see, it's a Microsoft term.

Error creating home directory - Access is denied.

Hi,
I am getting one issue on the task while provisioning homedrive and homedirectory on AD resource.
Error creating home directory '\\rusehf06\home\rc9782rf': ': Access is denied
Please help. Thanks in advance.

These error messages are typically pretty obvious with permission errors. It's getting the correct permissions that is the challenge. I would suggest you start by adding the user whom is in your IT Resource for Active Directory into the local administrators group for the server you are trying to create the folder on. Also, consult with your AD Admins to get it resolved the quickest most likely. Their skill set will be better than what we can provide.
-Kevin

Is it possible to create a cmdlet using PS script ?

Mostly cmtlets are compiled code which are written in c#. Is it possible to create powershell cmdlets using powershell script ?
-Pranav

That's what Advanced Functions are. (The original name for Advanced Functions was "Script Cmdlets".) Check out the about_Functions_Advanced, about_Functions_Advanced_Methods, and about_Functions_Advanced_Parameters help files for more information
on this topic.
I'm not surprised, once more, that this rubbish-ell coder spreads wrong concepts about PowerShell.
If this rubbish-ell coder cared to read the about_* mentioned, he would have read that
advanced functions and
compiled cmdlets have differences!
If the two halves of his brain are not 'smoked' he may conclude that two things that have differences cannot be considered the same (I don't know if his brain has been completely 'smoked').
It's my obligation to mark this post as ABUSIVE for spreading wrong PowerShell concepts.
David is a pro and you are a troll. The OP's original question was:
"Is it possible to create powershell cmdlets using powershell script ?"
He did not ask whether it was possible to create Compiled Cmdlets with Powershell code. If an advanced function works exactly like a compiled cmdlet at the command line then it qualifies as a cmdlet. I spend a lot of time writing such cmdlets
and they are exactly that - cmdlets!
Conceptually, David is exactly right. No one said there are absolutely no differences between the two, but expounding on the concepts of using Powershell is not the same as trying to call out everyone here on tiny little nitpicks, which
is what you are doing (abuse).

Create Home Directory in NetWare with the OIM 9.1

I am trying to find out if there is a way to create a NetWare User home directory with OIM 9.1 and the eDirectory Connector?
Edited by: user11137756 on May 6, 2009 11:42 AM

I'm confused. It looks like you already have /home configured:
<pre># zpool status
pool: home
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
home ONLINE 0 0 0
c4t3d0 ONLINE 0 0 0
errors: No known data errors
# zfs list
NAME USED AVAIL REFER MOUNTPOINT
home 86K 134G 32K /home
...</pre>
What is the problem? Looks like you already have /home configured. Are you sure automounter is not running?
Try this:
<pre>zfs set mountpoint=none home
rm -rf /home
zfs set mountpoint=/home home</pre>

Create Home Now in WGM does not create home directory until...

We are using newest ver. of Leopard on our Xserve and have some issues with Workgroup Manager. We can create new users and specify the location of their HOME, however, when we try to Create Home Now and Save, the directory does not get created! No errors though, just silence and no action. Tried many times and no go.
UNTIL.... We log in with than new username directly into the server using Remote Desktop. Once logged in to Xserve as local user, the Home Directory magically appears.
What is happening?

Not sure what's happening - you can check the logs for clues.
You can also use createhomedir -a That will create home dirs for all users (and will not touch existing home dirs)
See here for more info
http://support.apple.com/kb/TA21050?viewlocale=en_US

Moving files into directory using shell script

Can someone tell me how I move files into directory using *nix/linux shell script?
I have files which created from stored procedures using utl_file. The files name for example:
DKH_104_12345
DKE_101_42324242
DKH_102_32432
DKE_101_34553
Then I create directories automatically for example:
/oradata/apps/dmp/output/101
/oradata/apps/dmp/output/102
/oradata/apps/dmp/output/103
/oradata/apps/dmp/output/104
Using this procedure :
CREATE OR REPLACE PROCEDURE Xorganize AS
v_item VARCHAR2(5);
v_DirName VARCHAR2(50);
v_FileName VARCHAR2(50):='xorganize';
v_FileExt VARCHAR2(5):='.sh';
v_ID UTL_FILE.file_type;
CURSOR res IS
--find the directory name from table
SELECT brn_cde FROM vcr_brn_cde ORDER BY 1;
BEGIN
--used by utl.file funtion
SELECT PRD_DIR INTO v_DirName
FROM CR_SYS_PRM
WHERE CLT_CDE ='FIF';
SELECT v_FileName||v_FileExt INTO v_FileName FROM dual;
v_ID:=UTL_FILE.FOPEN(v_DirName,v_FileName, 'w');
utl_file.PUTF(v_ID,'%s\n','@@echo OFF');
utl_file.PUTF(v_ID,'%s\n','cls');
utl_file.PUTF(v_ID,'%s\n','echo Reorganizing ...');
OPEN res;
     LOOP
          FETCH res INTO v_item;
          EXIT WHEN res%NOTFOUND;
          utl_file.PUTF(v_ID,'%s\n','mkdir '||v_item);
     END LOOP;
CLOSE res;
OPEN res;
     LOOP
          FETCH res INTO v_item;
          EXIT WHEN res%NOTFOUND;
          utl_file.PUTF(v_ID,'%s\n','move _'||v_item||'_.* '||v_item||'\');
     END LOOP;
CLOSE res;
utl_file.PUTF(v_ID,'%s\n','FOR /F "usebackq delims=" %%1 IN (`dir /b *.`) DO @rd/q %%1');
utl_file.PUTF(v_ID,'%s\n','cls');
utl_file.PUTF(v_ID,'%s\n','echo Reorganizing ...Done');
utl_file.fclose(v_ID);
END;
Everything works fine, BUT, the script is generated in dos/windows scripting.
Now I need to run the script in *nix/linux shell, which I still can’t do it (because of my knowledge :p).
And also I don’t know if the script already generated in *nix/linux shell version, how do I chmod +x the script from stored procedure, I can’t use ‘host’ command in my tools
Thanks a lot
-firman

If you're using 9i then UTL_FILE.FRENAME() will execute something like a Unix mv command.
If you want to do a chmod then you'll need to check out how to use a Java Stored Procedure to execute OS calls.
Cheers, APC

How to create a class using java script..

Hi all,
Iam new to java script and I tried out the following program but its not working..I basically created a class just like a java prog' but Iam not getting any output or error.Iam attaching the code below.
If I created one function inside the script and create one object its working fine but what should I do when I have a lot of function??so I created a class and put all the function and created an object but its not working..
Do let me know what changes should I do..Iam attaching the code which I had written. or give me an example of how to create a class with couple of functions using JAVASCRIPT
Thanks
Avis_su
<html>
<head><title>JSP Page</title></head>
<body>
<SCRIPT language = "JavaScript">

</script>
</body>
</html>

Run this program to get your answer:
public class AnswerToYourPost {
public static void main(String args[]) {
System.out.println("TRUE/FALSE: This question
ion belongs on a Java forum.\n"
+ "ANSWER: " + ("Javascript" == "Java"));
}Since when do we compare objects for equality using operator == ?

Creating a Directory using a MacBook Pro

I am trying to create a directory with photos next to the contact information that can be saved as a pdf so that people can have it in iBooks on their phone. What is the best program to do this?

What kind of picture? Screen Shot? Command-Shift 3
Using the Camera? Check out Photo Booth. It's in your applications folder.

Question about creating new tables using SQL script in WebLogic Server

Hi,
I am new to WebLogic and I am following a book Java EE Development with Eclipse published by PACKT Publishing to learn
Java EE. I have installed Oracle Enterprise Pack for Eclipse on the PC and I am able to log into the WebLogic Server Administration Console
and set up a Data Source. However the next step is to create tables for the database. The book says that the tables can be created using
SQL script run from the SQL command line.
I cannot see any way of inputting SQL script into the WebLogic Server Admistration Console. Aslo there is no SQL Command line in DOS.
Thanks for your help.
Brian.

Sounds like you are to run the scripts provided by a tutorial to create the tables, right? In that case, you may need to install an Oracle client to connect to your database. The client is automatically installed with the database, so if you have access to the server that hosts the database, you should be able to run SQLplus from there.
As far as I know, there is no way to run a script from the Admin Console. I could be wrong, however.

Create document set using ECMA Script

Hi,
I want to create a document set in SharePoint 2010 document library where i have already included document set content type.
Is there any way to create a document set using ECMA Script?? If yes, then please provide the sample code for this...
Thanks.
-Prashant

Hi Prashant,
Although this post is aimed at SP 2013 and the App model, it should give you the object model references you need to complete your goal:
http://blogs.msdn.com/b/mittals/archive/2013/04/03/how-to-create-a-document-set-in-sharepoint-2013-using-javascript-client-side-object-model-jsom.aspx
In particular the following function should be of use:
function CreateDocumentSet() {
var ctx = new SP.ClientContext("http://yourSharePointSite");
var parentFolder;
var newDocSetName = $('#txtGetDocumentSetName').val();
var docSetContentTypeID = "0x0120D520";
var web = ctx.get_web();
var list = web.get_lists().getByTitle('DocSetLibrary');
ctx.load(list);
parentFolder = list.get_rootFolder();
ctx.load(parentFolder);
var docsetContentType = web.get_contentTypes().getById(docSetContentTypeID);
ctx.load(docsetContentType);
ctx.executeQueryAsync(function () {
var isCreated = SP.DocumentSet.DocumentSet.create(ctx, parentFolder, newDocSetName, docsetContentType.get_id());
ctx.executeQueryAsync(SuccessHandler('Document Set creation successful'), FailureHandler("Document Set creation failed"));
}, FailureHandler("Folder loading failed"));
ctx.add_requestSucceeded(function () {
$('#txtGetDocumentSetName').val('');
alert('Request Succeeded');
ctx.add_requestFailed(function (sender, args) {
alert('Request failed: ' + args.get_message());
// Failure Message Handler
function FailureHandler(message) {
return function (sender, args) {
alert(message + ": " + args.get_message());
// Success Message Handler
function SuccessHandler(message) {
return function () {
alert(message);
Keith Tuomi | Twitter: @itgroove_keith | Blog:
http://yalla.itgroove.net
Please click "Propose As Answer" if a post solves the problem or "Vote As Helpful" if a post has been useful to you.

Creating folio's using code/scripting?

Hi,
I would like to know if there's a possibility to create/upload folios using code or scripting, for example using InDesignServer.
Maybe there's a SDK available for the Digital Publishing Suite?
Thanks

Yes that's my understanding for Javascript, with clarification that with "compile them all into animated GIF through script" using some external program (e.g. check out ImageMagick). Whether that is an OK solution depends on what you are trying to do (just for own internal use or distribution).
For the Javascript docs see http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/photoshop/pdfs/photoshop-cc-javascr ipt-ref.pdf

Create local variable using labview scripting

I am trying to use labview scripting to create a control and a local variable for that control. I want both the local variable and the control contained inside a case structure. My problems are twofold:
1. the local variable is left blank/unnamed
2. the local variable is wired outside of the case structure, even though I set it's owner to be the same as the owner for the control (which is placed inside the case structure).
The flat panel is there because I thought that my problem might be a result of the local var being created before the actual control, so this just forces the control to be created first. The other thing I wonder about is the VI Object Class for the local variable. I have tried 'Node' and Control->Boolean, but neither worked.
I have attached a jpg of the code I'm talking about. The picture on thetop is of the code in question. The picture on the bottom is of the resulting code that's created....
Can anyone offer any help?
Thank you...
Attachments:
vi_scripting_lv.png ‏95 KB

The reason your locals aren't tied to a control, is because you didn't make a local variable from any control. Use the Boolean reference wire and wire it to an Invoke Node and select the Create >> Local Variable method.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Create Home Directory using VB Script

Similar Messages

Maybe you are looking for