Create hyperlink in a General Text Object

Hi,
using transaction SE61 I want to create a hyperlink to an external site in General Text Object BBP_PRIV_STMNT_EXTERNAL.  The objective is to hav this link showing instead of the confidentiality agreement in the self-registration page.
Anyone kwows how to do that?
Thanks.

I'm in the same boat as you, inasmuchas I taught myself LC. I've tried to replicate your issue. I'm trying to understand where the issue actually lies.
First, I created a new document to test. I dragged the text field onto the document and stretched it to accomodate what I was going to type and entered: http://www.google.com/something
This works as intended.
Next I tried a link similar to yours in our own intranet: http://intranet/WebPages/support.aspx
That also worked.
Now, for what you're actually working with: a SharePoint document.
I tried to paste a link to a document that I created on our Sharepoint site. The link failed! I noticed that the end of the link was truncated (something like 7 characters). So, I tried a shorter link. That worked!
What else is happening when they click the link? Are they simply being asked to "check out" the document? Are you getting an error message like "an error has occured while opening the page"?
Message was edited by: jasotastic81 (apparently "lnik" is not a word)

Similar Messages

  • Help with creating hyperlinks in formatted CSS text

    I'm having difficulty adding links using Dreamweaver. I first
    format the text with a CSS style, then use the Properties window to
    add the hyperlink (or Insert>Hyperlink menu). It creates this,
    <p class="linkbodyleftcol"><a href="
    http://www.amcc.com">AMCC</a></p>
    However, when I place the cursor on AMCC in the design
    window, most of the CSS styles I see in the CSS Styles menu are
    crossed out with a message "...does not apply to your selection
    because it is not inherited. It is applied to a closing tag."
    To correct this, I modify the code to:
    <a href="
    http://www.amcc.com"><p
    class="linkbodyleftcol"AMCC</p></a>
    And this clears up the error. However, there must be a more
    efficient way to add links while retaining CSS formatting. Could
    someone point out a better method?
    Best regards, -gary

    But wouldn't this still entail adding a hyperlink in Design
    view then editing this code in Code view?
    Doesn't DW allow one to enter a hyperlink in Design view
    while maintaining CSS? Seems hard to believe something so simple
    would require going into the code, since CSS and hyperlinks are two
    key ingredients in web design.

  • Smartform and SE61 General Texts - Still no answer!!!

    Hi,
    This is in regards to General Texts created in SE61.
    In the smartform, is creating a text as include text the only way to extract data from the SE61 general text object?
    Is there a FM available to do this or is the above method the only possibility?
    Please help.
    Thanks,
    John
    Edited by: John Damion on Feb 19, 2008 12:41 AM

    Hi John,
    you need to use INCLUDE TEXT only.
    Regards,
    Atish

  • Splitting up text at line breaks into separate text objects

    creating a map with many text objects each containing one village name etc. or sth similar it would be nice if we could
    - type all names with enter/linebreaks
    - and then choose something like 'create separate text objects for each text line'
    I know I could convert the start text into outlines and then individually placing/moving them, but I still want to be able to edit all texts in one go (e.g. changing font size, colour, etc.)

    Beate,
    Since you mentioned a map, you can also do it this way:
    1. Count the paragraphs in your text.
    2. Select the text object containing the lines of text. Copy or Cut it to the Clipboard.
    3. LineTool: Draw a horizontal line.
    4. AltShiftDrag a copy of the line downward. Transform Again (Ctrl D) until you have as many lines as you had paragraphs.
    5. Text tool: Hover over the topmost line. Click when you see the Type On A Path cursor. Paste.
    6. Drag a selection marquee across all the lines. Type>ThreadedText>Create.
    7. Type>ThreadedText>RemoveThreading.
    Now you have a bunch of indiviudal text objects, but they are already Type On A Path objects; so you can drag them into position on your map, and then directselect their paths to edit their shapes (assuming you want pathType objects to bend along roads, etc.)
    JET

  • CS4 creating hyperlinks in TOC from paragraph style sheet

    Hi all
    Does anyone know if it's possible for a script to find all instances of text in a named paragraph style  and then link each instance to the corresponding entry in a modified TOC?
    The workflow is for a 800-item catalogue created in CS4. At the moment, the title for each entry is set in a dedicated paragraph style; once all entries are signed off, I generate a TOC listing all the items. All very straightforward.
    My client now wants an interactive PDF so that clicking on any item in the TOC will take him automatically to the relevant page in the catalogue. I want to avoid having to generate those hyperlinks manually… I know very little about scripting but I do know this is exactly the sort of thing that should be possible:
    – find first instance of text in Para Style 1
    – create hyperlink named with that text
    – link this to corresponding text in Para Style 2
    – repeat for all instances of text in Para Style 1.
    But I also know that the hyperlink/cross-reference function can be a little counter-intuitive and I don't know whether I'm asking for the moon on a stick.
    Thanks!

    There's an excellent script* called LiveTOC which does exactly what you're asking for. It allows you to turn all your TOC entries into hyperlinks for PDF export.
    Check it out: http://www.freelancebookdesign.com/scripts/live-toc
    Ariel
    * which happens to have been written by me

  • Distribute spacing of text objects that are in a group doesn't work

    Here's the scenario:
    create a set of discreet text objects, say for a nav bar on a web site
    put these in a group
    open the align objects panel
    set the "Align to" to "Selection"
    attempt that the distribute spacing (or, in fact, any of the align panel options) doesn't seem to work. I have to ungroup the objects first.
    If i choose Align to Artboard some of the options work.
    Is this a ttwii (that's the way it is) or am i doing something wrong?
    Thanks in advance!
    Steve

    Yes ttwi.
    Align & Distribute, aligns and distributes groups, not the elements within a group.
    If this was the other way around trying to align logos/UPCs/illustrations would create a mess as these are usually groups of multiple elements.

  • How to create hyperlinked text in F1 help of a particular Data Element.

    Dear Guru
    I have encountered an issuse regarding to create hyperlinked text in F1 help of a particular Data Element.
    For Example what i am trying to do is ---
    If you open a particular data element say "ATNAM" in se11 you will found the below documentation available for ATNAM -->>
    DE ATNAM
    Text
    Characteristic Name
    Definition
    Name that uniquely identifies a *characteristic*.
    >> The "characteristics" comes in hyperlinked bluecolor and if we press this it linked to below --- >>
    Definition: characteristic
    Classification (CA-CL)
    Property for describing and distinguishing between objects, such as length, color, or weight.
    Profitability Analysis (CO-PA)
    I am able to make 1st part of the documentation using SE61.
    But I am not able to make Hyperlinked part of that documentaion .
    please show me some way to develop this
    Thanks & regards
    Saifur Rahaman

    HI,
    you can give the hyperlink in the documentation by going to the path below
    MENUBAR ----> INSERT -----> TEXT -----> HYPERTEXT.
    this will solve the issue
    have a good day
    regards
    sarves

  • How to create a text object at runtime?

    Hi,
    I am using crystal reports for visual studio 2010 and using c# to programming.
    I need to create  a text object in a specific section like section 2. and also I need to control the text object's position and text.
    I tried to move a object like:
    reportDocument1.ReportDefinition.Sections[j].ReportObjects<i>.Left = 0x8760;
    but object's position doesn't change at all.
    How can I do these (create a text object and change a object postion)?
    Thanks

    Hi Don,
    Thank you.
    I have downloaded a RAS ( report application Server ) sample.
    The sample uses the Business Objects Enterprise XI release 2. I am using win 7 and crystal reports for vs2010. Can I use this version of crystal reports to create  a text object at runtime? If not, what is the lowest version I have to purchase to achieve what I want?
    Basicly I need following capabilities at runtime:
    1) craete text objects, line objects, image objects.
    2) change text object, line object and image object positions, sizes, values of text object. If can I like to be able to change font as well.
    3) supress objects, sections. 
    4) change section's height

  • Error message while creating text object

    I am trying to create a text object and text id's for an application. I go to se75 to do this and make a text object called ZABC and upon save I get an informational message saying the following:
    Observe name ranges: Y,Z for customers, J_NC for partners, A..X for SAP
    When I click the green checkbox, it pops up another box saying the object is not within the valid name range. Save anyway?
    I tried creating one with Z_ABC and that came up with the same thing. What am I doing wrong here?
    Thanks,
    Josh

    Read the information message carefully. Then proceed, if you intend to have custom  "standard" texts (sort of an oxymoron, but everyplace I've been does this)...
    If you are working in a customer system, only create standard texts using the following naming convention:
    Initial letter Y or Z in the text name with any text ID
    or
    Initial letter Y or Z in the text ID with any text name

  • How to create a new Text Object to be used for SAVE_TEXT FUNCTION

    hi,,
    can anyone tell how can i create a new text object and text id for saving text by using function SAVE_TEXT.
    Thanks

    hi,.
    try out this 
    DATA: header LIKE thead.
    DATA: newheader LIKE thead.
    DATA:lines LIKE tline OCCURS 0 WITH HEADER LINE.
    header-tdobject = 'VBBK'.
    header-tdname = delivery number.
    header-tdspras = language.
    lines-tdformat = '*'.
    header-tdid = text id. "for example: Z022
    lines-tdline = your text that you want to write .
    APPEND lines. CLEAR lines.
    CALL FUNCTION 'SAVE_TEXT'
    EXPORTING
    client = sy-mandt
    header = header
    savemode_direct = 'V'
    IMPORTING
    newheader = newheader
    TABLES
    lines = lines
    EXCEPTIONS
    id = 1
    language = 2
    name = 3
    object = 4
    OTHERS = 5.

  • How to create a LONG TEXT object in BAPI_ALM_NOTIF_CREATE

    Dear experts,
    Would you please give me a hand how to create a LONG TEXT object when creating a new Notification using BAPI_ALM_NOTIF_CREATE.
    The snapit of my code is below. The Notification is created but without a long text.
    THANK YOU!!
    Data:
        lv_it_longText type STANDARD TABLE OF BAPI2080_NOTFULLTXTI,
          lv_st_longText like LINE OF  lv_it_longText,
      lv_st_longText-OBJTYPE = 'QME'.
      lv_st_longText-TEXT_LINE = DESCRIPTIONLONG.
    CALL FUNCTION 'BAPI_ALM_NOTIF_CREATE'
      EXPORTING
      EXTERNAL_NUMBER          =
       notif_type               = 'M1'
        notifheader              = lv_header
      TASK_DETERMINATION       = ' '
      SENDER                   =
      ORDERID                  =
    IMPORTING
       NOTIFHEADER_EXPORT       = lv_header_import
    TABLES
    *NOTITEM                  =   lv_it_item
      NOTIFCAUS                =
      NOTIFACTV                =
      NOTIFTASK                =
      NOTIFPARTNR              =
       LONGTEXTS                = lv_it_longText
      KEY_RELATIONSHIPS        =
       RETURN                   = lv_it_return.

    Hi
    Make sure you have filled OBKEY.
    OBJKEY must have the corresponding sort field for the values named below :-
    1. QMEL - Notification header
    2. QMFE - Notification item
    3. QMUR - Notification cause
    4. QMSM - Notification task
    5. QMMA - Notification action
    The combination of sort field of item/cause, item/task and item/action must be unique within a notification. If you leave the sort field empty and the OBJTYP = QME, then a long text is created for the notification header.
    Regards
    Abhii

  • Garbled text when creating hyperlinks

    I have a user who is creating hyperlinks in the Table of Contents of a 500 page PDF to pages within the PDF. After 10-15 hyperlinks, she gets strange characters and garbled text on some of the pages. If she saves and closes the document and reopens, she can go back to working but it will reoccur soon again. She is using Acrobat 9 Professional on Windows 7 Enterprise. She has the latest updates for Acrobat. Any thoughts?
    thanks

    Most of the document was converted from Microsoft Excel 2007 documents. The Table of Contents was converted from Microsoft Word 2007 document.

  • Customer Specific long text object to be create

    Hi all,
    I have to create and maintain Long text in my module pool program , just like some std. transaction have it at header.
    I know new text object can be created at SE75 with textid. But don't know how to call MS-editor create, save and display
    long text , just like most of std. transaction in SAP.
    Please help me with some sample codes and steps in this regards.
    Thanks in advance,
    Vinit

    hi Vineet,
    Not sure this wud wrk or not but give it a try...
    Use some message no of a message class created in txn se91 if that message gets display where u need to show the long text. Just remove the tick from the checkbox which says self explainatory goto longtext and write the remarks over there
    I hope i am clear..

  • Odd messages when creating text object (se75)

    I am trying to create a text object and text id's for an application. I go to se75 to do this and make a text object called ZABC and upon save I get an informational message saying the following:
    Observe name ranges: Y,Z for customers, J_NC for partners, A..X for SAP
    When I click the green checkbox, it pops up another box saying the object is not within the valid name range. Save anyway?
    I tried creating one with Z_ABC and that came up with the same thing. What am I doing wrong here?
    Thanks,
    Josh

    duplicate post
    Error message while creating text object

  • How to Change behavior of standard text object&text ID (SE75)?

    Hello there!!
    I'm struggling with this:
    For standard text object C_SHES_ACH & ID 0001 (EHS: IHS Safety Measures) wichs is used as a description for safety measures (CBIH82/CBIH02..) need that when the user create or edit the text, already appears a "Fill in the blanks"  form.
    For example, in CBIH82, editing an accident log, I go to Safety measures Button, then create a safety meassure, and when i click for long text description something like this should appear:
    TEXT 1 (1st Title)
    user line
    user line
    user line
    user line
    (free amount of user lines)
    TEXT 2 (2nd Title)
    user line
    user line
    user line
    user line
    (free amount of user lines)
    Thanks a lot for your feedback!
    Rgds!!

    Hii,
    I am unable to understand exactly wat you want.
    But for free amount of lines : Keep that text under LOOP. Right click on template or window and create a loop and under that loop keep the text ,you can get many lines. or the given below point plzz follow.
    1,Use SO10 Tcode to write standard text in Smartform.
    2.For long text
    method1
    Create TEXT node- general attributes change text type to include text
    then you can input text name/text object/text id/language
    method2
    create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
    then use LOOP or TABLE node to display it
    For TEXT module(For foreign language)
    Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
    then enter smartform Create TEXT node- general attributes change text type to text module
    input the text module name which created by above
    3.
    1. take function module name of the smartform.
    2. goto se37 and type that fm name.
    3. goto attributes tab
    4. double click on either program or include .
    5. There u can find all the subroutines used inside smartform.
    6. search for "perform %move using %textkey-name".
    4.Standard Texts are created in SO10 Tcode and stored in STXH table with OBject ,ID and NAME parameters. We can use Read_Text FM to read the text.
    check the tables STXH & STXL.
    5.
    How to CAll Standard Text in Smart Forms
    In SFs you can insert the standard tests using the TEXT node. Create a TEXT NODE. Then in the GENERAL ATTRIBUTES of this TEXT node select INCLUDE TEXT in the TYPE option. Then you have to enter the text name, object , ID and language in the provided fields. Then if you dont want any error if there is no text in the corresponding text then CHECK the check box "No errors if no text available.

Maybe you are looking for