Create new characteristics for existing release strategies

Dear experts,
Whenever I have a roll-out, I have to create a new characteristic that is the purchase order value in local currency, that is to be assigned to the class used for the Release Strategies of purchase orders.
The problem is that whenever I do this, all the existing release strategies have an additional characteristic to be maintained. Since I have more than 1.500 release strategies, I have to go through each one of them and except for the new release strategies, put >= zero in this new characteristic.
Is there any way, that whenever I create this new characteristics, I can define a default value that will be assigned to every existing release strategies in the system?
I've tried to use the default value, but it only works when I'm introducing the characteristics values for the first time in the release strategies.
Any ideas?
Thanks.

Similar Messages

Create new mailbox for existing users?

Hi All,
I am new to JNDI concepts. I need to create new mailbox for existing users in domino directory. is it possible?
Scenario is : I have some users in domino directory. They dont have mail account now. I want to create it.
Kindly guide me...
Thanks,
Ram

Hi,
You can try LSMW (Direct method) for uploading class values.
Upload file can hae following structure:
OBJEK     |     ATINN     |     KLART     |     ATWRT
Release Grou+Release strategy |     Characteristic name     |     Class type     |     Class Value
e.g. rel grp is PO, rel strategy is 01, characteristic name is EBAN_EKORG, and class value is 1000 then
OBJEK     |     ATINN     |     KLART     |     ATWRT
PO01     |     EBAN_EKORG |     032     |     1000
multiple characterstics can be
OBJEK     |     ATINN     |     KLART     |     ATWRT
PO01     |     EBAN_EKORG |     032     |     1000
PO01     |     EBAN_EKGRP |     032     |     100
Regards,
Yogesh

Problem in creating new versions for existing DIR using CV01N

I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

SAPSCRIPT: Creating new Language for existing form

Hi Guys,
I need add an additional language for an existing form. Italian is not available for the this existing form. How can I add this language? do I need to copy the form with language EN? how can I include that form in the existing form? or there are other way to do this? Thanks in advance!
Regards,
Michael Nacionales

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

How to create the new varients for existing generic article.

Hi all,
      Can any body tell how can i create new varients for existing generic article
    T-Code - MM41 ( IS-Retail).
   Plz help, helpful answers will be rewarded.
Regards,
Sai

Hi
If you have access to the program of the tcode, then go to that tcode click on system->status, to get the program name, go to se38 give that program name and select variants radiobutton, create the variant.
Regards
Haritha.

Problem in creating new implementation for filter dependent badi

Hi Experts,
I want to use badi NOTIF_EVENT_POST.It is a filter dependent badi. It is asking filter type while implementing thro se19. Could anyone pls tel me how to create new implementation for the filter dependent badi. Existing filter type is QMART. is there any problem if i change the filter type?
Thanks in Advance!

Hi ,
NOTIF_EVENT_POST is filter dependent and filter values are based on QMART value in table TQ80. You need to specify the filter value ie : QMART value before implimentation , before that check all active implimentations for the same , if u have to impliment on same filter value , you need to deactivate the one which is implimented on same filter value .
You are not supposed to change the filter type.
Regards,
Vamsi
Edited by: CH. VAMSHI on Sep 29, 2009 11:58 AM

While Creating New Insert Form Existing Data Display from the Table

Hi
I am New To Sun Java Studio Creator and New to Java Also While Creating New Insert Form Existing Data Display from the Table while i am Run the Form. Can any one help me to Solve this one

Dear Giri,
As per your Advise, Literally I have Search the Properties for the Components to set value Null, but I am Unable to find the Value in Properties palate. I have tried in various options like
In the Properties Palate
TextField1_onselect use Value null
TextField1_text I have selected use Value option and I have manually Keyed-in null;
In the JSP Page, I have manually keyed in the null value below said
<ui:textField binding="#{BI.textField2}" id="textField2" style="position: absolute; left: 240px; top: 96px" text="#{BI.bDataProvider.value['ISSUENO'] = null}"/>
<ui:textField binding="#{BI.textField2.Value = null }" id="textField2" style="position: absolute; left: 240px; top: 96px" text="#{BI.bDataProvider.value['ISSUENO'] = null}"/>
At last I am Failure. I am ignorant of it. Can you please help me on this where I have to set null value for the components? I will be very kind of you

Every time system create new production order after releasing sales order c

Hi Guru,
FG material strategy: 82 (sales order creates production order).
After creating the sales order it goes in to credit block. Whenever we release sales order from credit block through VKM1, system has created production order. We confirmed this production order and delivered.
But after this sales person change the sales order value, because of which again sales order goes into the credit block and after releasing sales order from credit block system create new production order even if one production order already confirmed and delivered against the same sales order.
*Every time system create new production order after releasing sales order credit block.
Thanx & regards
pnu

PNU,
So, to restate:
In MD04, you have Unrestricted Sales order Stock ('E' Stock) on hand.
In the same MRP segment, and against the same Storage Location as the stock, you have a Sales Order requirement that was recently blocked and unblocked.
During the unblocking event, the system produced a new production order.
This is not normal. If the above accurately depicts your situation, I would look for an altered Strategy 82, or a userexit. SAP ATP (the beginning event of the Strat 82 process) will normally first check for the availability of stock. Only if the stock is not available, then it will create the new production order.
Best Regards,
DB49

Need Help to create new screen for RF Sapconsole

Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alain

hi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren

Create new session for each window opening

From a jsp page i open a page called student.jsp by clicking on students admision no.Therefore lots of pages can be opend in new windows with relevent student details.
but when i click on the link i called a servlet, get relevent details and redirect to student.jsp. The problem is ,all opened windows have same session id and there are session conflicts.
How can i create new sessions for each page thru the servlet or is there any other alternatives

I actually was working on a problem that was similar to this, and the problem is with how each web-browser works with sessions...
Each browser window (Except in one case with IE) will use the same session in each window.
However, you might be able to use URL-Rewritting to manage your sessions and get around using cookies for for session tracking. I personally haven't tried this, but I'm betting that it will work.
Best of Luck,
Nate

How to create new scope for SharePoint calendar?

How to create new scope for SharePoint calendar?
I have a calendar list to which I want to create following scopes-
Annual View
Half Year 1 (Jan-June)
Half Year 2 (Jul-Dec)
Quarter 1 (Jan-Mar)
Quarter 2 (Apr-Jun)
Quarter 3 (Jul-Sep)
Quarter 4 (Oct-Dec)
How this can be created. Any help appriciated. Thanks.

Hi Pratima,
Can you please see below link and code snippet for how to
format date in gridview.
http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Gridvew Date format</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
<RowStyle BackColor="#EFF3FB" />
<FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
<HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<AlternatingRowStyle BackColor="White" />
<Columns>
<asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
<asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
<asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
<asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
<asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
</div>
</form>
</body>
</html>
Hope this will help you.
Regards
Soni K

Unable to create new domain for ORM in Weblogic 8.1

Hi,
I have installed Oracle Role Manager(ORM) 10.1.4 and to run ORM in weblogic i have to create a new domain for ORM.
I tried to create a new domain in weblogic 8.1 in configuration wizard by selecting the orm_createdomain_template_103.jar but i m getting an error
"There is a problem with the template".
This template is to create new domain for ORM in weblogic 10.3
Kindly help me to resolve this issue.
Regards,
Manju

I have installed ORM 10.1.4.1 on weblogic 10.3
I have also created a new domain for ORM in weblogic.
When i start the Managed server using startManagedWebLogic.cmd i m getting the following
errort
t3://localhost:7004/jndi/weblogic.management.mbeanservers.domainruntime.
java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainr
untime'. Resolved 'weblogic.management.mbeanservers'
at weblogic.management.remote.common.ClientProviderBase.makeConnection(C
lientProviderBase.java:156)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(
ClientProviderBase.java:79)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnec
torFactory.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFacto
ry.java:247)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainR
untimeService.getDomainMBeanServerConnection(RegisterWithDomainRuntimeService.ja
va:199)
Truncated. see log file for complete stacktrace
javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbean
servers.domainruntime'. Resolved 'weblogic.management.mbeanservers'; remaining n
ame 'domainruntime'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(Basic
NamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.jav
a:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.j
ava:182)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:20
6)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:21
4)
Truncated. see log file for complete stacktrace
>
<Jul 3, 2009 10:08:52 AM GMT+05:30> <Notice> <WebLogicServer> <BEA-000365> <Serv
er state changed to RUNNING>
<Jul 3, 2009 10:08:52 AM GMT+05:30> <Notice> <WebLogicServer> <BEA-000360> <Serv
er started in RUNNING mode>
Please help me to resolve this issue.
Regards,
Manju

How to create new version for material

Hi expert,
Can anyone please guide me step by step on how to create new version for material and vendor? Please also mention transaction and details step by step.
Thanks

HI,
Do you mean to have version management for purchasing documents?.
Best Regards,
Arminda Jack

How to Create New Application for iPhone

Hi,
Can anyone guide me how to create New Applications for the iPhone.
Regards,
Mustafa Ali Qizilbash

If you think Apple's is making a profit off the $99 it collects for the iPhone Developer Program membership, you're badly underestimating how much it costs to run the program.

How to create new structure for SOP?

How to create new structure for SOP? and transfer data for long term planning?

hi dear
For SOP there are two types
1. Standard SOP : this the standard SOP configured by SAP consider the Level by Level planning and planning done for product group .
2. Flexible planning SOP: this option is given, so that Rough planning/SOP planning can be done as per the client requirement.e.g planning structure can be sales orgn., distribution channel, division, plant, material
For configuring the flexible planning SOP follow steps
1. Define info structure in IMG
where u define the characteristic and Key field
2. Set parameters for info structures and key figures
Sales & Operations Planning >Master Data>Set parameters for info structures and key figures
where u define Planning method
Consistent planning
Level-by-level planning
Delta planning
and aggregation type
1. Average calculated
2. Total created
3. No aggregation
3. create Planning type with reference to info structure
Regards
Suresh

Create new characteristics for existing release strategies

Similar Messages

Maybe you are looking for