How to create new version for material

Hi expert,
Can anyone please guide me step by step on how to create new version for material and vendor? Please also mention transaction and details step by step.
Thanks

HI,
Do you mean to have version management for purchasing documents?.
Best Regards,
Arminda Jack

Similar Messages

How to create new group for material type

Hello all experts,
Im unable to create a new group for materials types, diff groups for FG and raw materials material type??
Could you pls help ??
Thanks in advance.

Hi
When you create a new material you have to specify the material types like finished goods or raw material like that in the initial screen
For this new material types can be defined in
SPRO -> Logistic - General -> Material Master -> Basic Settings -> Material Type ->Define attribute of material Type
T code OMS2
After specifying the material type and giving organizational data like plant, storage location,sales org etc we go on to create the material
In one of the tabs the material groups should be specified and from MM point of view it is a reqd entry
this can be defined in
Define Material Group
SPRO -> Logistic - General -> Material Master -> Setting for Key Field -> Define Material Group
T .Code: OMSF
I beleive this is what you are asking about
Regards
Raja

How to create new structure for SOP?

How to create new structure for SOP? and transfer data for long term planning?

hi dear
For SOP there are two types
1. Standard SOP : this the standard SOP configured by SAP consider the Level by Level planning and planning done for product group .
2. Flexible planning SOP: this option is given, so that Rough planning/SOP planning can be done as per the client requirement.e.g planning structure can be sales orgn., distribution channel, division, plant, material
For configuring the flexible planning SOP follow steps
1. Define info structure in IMG
where u define the characteristic and Key field
2. Set parameters for info structures and key figures
Sales & Operations Planning >Master Data>Set parameters for info structures and key figures
where u define Planning method
Consistent planning
Level-by-level planning
Delta planning
and aggregation type
1. Average calculated
2. Total created
3. No aggregation
3. create Planning type with reference to info structure
Regards
Suresh

How to create new scope for SharePoint calendar?

How to create new scope for SharePoint calendar?
I have a calendar list to which I want to create following scopes-
Annual View
Half Year 1 (Jan-June)
Half Year 2 (Jul-Dec)
Quarter 1 (Jan-Mar)
Quarter 2 (Apr-Jun)
Quarter 3 (Jul-Sep)
Quarter 4 (Oct-Dec)
How this can be created. Any help appriciated. Thanks.

Hi Pratima,
Can you please see below link and code snippet for how to
format date in gridview.
http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Gridvew Date format</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
<RowStyle BackColor="#EFF3FB" />
<FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
<HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<AlternatingRowStyle BackColor="White" />
<Columns>
<asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
<asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
<asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
<asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
<asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
</div>
</form>
</body>
</html>
Hope this will help you.
Regards
Soni K

Problem in creating new versions for existing DIR using CV01N

I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

How to Create New Application for iPhone

Hi,
Can anyone guide me how to create New Applications for the iPhone.
Regards,
Mustafa Ali Qizilbash

If you think Apple's is making a profit off the $99 it collects for the iPhone Developer Program membership, you're badly underestimating how much it costs to run the program.

How to create classification view for material?

HI All,
How to create classification view for material? is there any function module?
pls let me know.
Bandi

check the standard include "LCLBPAU14" this is using the following F.M
call function 'BAPI_OBJCL_CREATE'
exporting
objectkeynew = l_object
objecttablenew = l_objecttable
classnumnew = classnum_new
classtypenew = l_classtype
status = status
standardclass = standardclass
changenumber = changenumber
keydate = keydate
no_default_values = no_default_values
importing
classif_status = classif_status
tables
allocvaluesnum = allocvaluesnum
allocvalueschar = allocvalueschar
allocvaluescurr = allocvaluescurr
return = return.

How to create production version for multiple BOM & Routing ?

If I have 3 BOMs ( A, B & C ) and 2 Routing ( 1 & 2 ) for material XYZ then how then production version will be created ? I feel that there will be 6 PVs.
combination of A1, A2, B1, B2, C1 & C2. but some one told me that I have to create duplicate routing of 1 & 2
with number 3 & 4 and use it for bom B, and another duplicate Routing with number 5&6 and use it for BOM C.
in this case my PV data will be like this A1, A2, B3, B4, C5, C6.
Please guide me which way is correct. I feel that the first way is right, because in that case I have 2 routing in system, and in second way I have total 6 routings for that product. please guide me.

Hi Archana
If you are doing component allocation with routing ,
routing for material 1 counter 1 you are choosing alternate Bom 1 or 2 for material.
similarly for Material 1 counter 2 you are choosing alternate Bom 1 0r 2 according to your choice
like this 3 routing groups will get created with each have 2 counters
if you allocate similar kind of material in one group in material allocation tab & you are going for component allocation it will assign one material bom.
second material bom will not get assigned to the operation.
if you are not going assign the component at the routing level than you can follow first process.
if you are planning to allocate components at routing level than you have to follow second process.
If have any more doubt kindly revert back with your query.
Thanks & Regards
Sandeep Kumar Praharaj

How to create New columns for the Internal Table Dynamically?

HI Guys,
In my logic i have to create new columns depending on the logic which i am executing.
My requirement is .I have to display o/p like this
Material || Year || Period || Mix ratio || Vendor ||Mix Ratio || Vendor || Mix Ratio Vendor || Mix ratio || Vendor || Mix ratio.............................from table's CKMLMV003 and CKMLMV001.Her i have to display the o/p in the above format and i have to display Vendor and Mix Ratio for 5 columns irrespective of data .If i have more than 5 columns for any record then i have to create a New columns dynamically for Vendor and Mix ratio.If anybody want my code i can Submit But plz tell with example how to do?
<b>The O/P must be finally shown in ALV Grid</b>
Thanks,
Gopi

You must create the entire internal table dynamically, you can not add columns to a statically define internal table. Here is an example of creating a dynamic internal table.
Creation of internal table dynamically based on the Date Range entered
Regards,
Rich Heilman

How to maintain production version for material and how it will work

Dear Friends,
                      i have created alternative bom for a material , My FG is having two RM1 and RM2. like below,
                FG --->RM1
                FG---->RM2
i created alternative BOM. how it will fetch raw materils from BOM while doing production confimation. what is meant by production version and how to configure that. how it will work
regards
RK

Dear Raja karthik,
1.Production version is a combination of BOM & Routing in Discrete scenario & in REM scenario its a
combination of BOM & Rate routing/Routing.The same can also be created only containing the BOM incase if it is going to be
used for a sub-contracting purchase info record.
2.Production version is a method or technique which's is used to produce a material.
3.A Material may be having one or more than one production version.
4.Production version can be differentiated by using either the validity date or Lot size range.
5.Say For Eg: Prod.Version1 --> Alt BOM1 & Routing1
Prod.Version2---> Alt BOM2 & Routing 1.
6.It has the status Locked and unlock.We can lock it when it is to blocked for any usage purpose.
6.Generally its created using T code MM02,by selecting MRP4 view and clicking on Production version key.
7.It's a master data in REM scenario.
8.Production versions can also be created using T code C223 for more than one material.
9.Planned independent requirements can be created production version specific in MD61.
Regards
Mangalraj.S

Re: How to create new subtypes for OM Custom infotype

Hi Gurus,
I facing problem when creating for Subtypes in OM , i need create Infotyes with Subtypes in OM.Check below steps how i created
1. I create Structure in se11. HRI9119
2. In PPCI , i create infotype 9119
3.In SM30 , I Maintain table T777i, here i selected my infotype (9119), then i clicked on infotype per object type and assign subtype (9229, 9339) to the my infotype .
4. After that, in same screen, i selected my infotype and assign TIME CONSTANT to my all subtype and infotypes.
After this , any think required to maintain , Plz tell me.. i didn't find my subtype in PP01.
Thanks and Regards ,
Venkatesh.M

Hi Venkatesh,
The new subtype has to be maintained in table V_778U.Also you need to relate the new subtype to object type in table T777Z and miantain the time contraints.
Please refer following path in IMG for further information
Personnel Mgt > OM > Basic settings > Data model enhancement
Hope this helps.
Regards,
Malathi V.

How to create new rules for agent assignment

Hi all,
I have a situation in which the esclation has to occur to the second line manager . is there any rule avail. for agent assignemnt and if not how I can creaet a new rule
Thanks in advance..

Hi,
One way is you can call SWX_GET_MANAGER function module twice for getting your manager's manger.
For creating new rule, you can copy any std rule and themn modify the copied rule using txn PFAC. e.g check out rule - 00000168, which uses above mentioned FM - SWX_GET_MANAGER .
Hope this helps.
Regds,
Akshay

How to create new subtypes for OM infotype 1002?

Gurus,
            I have a requirement to create four new subtypes (to different texts ) for OM infotype HRP1002.
Let me know the procedure to achieve this.
I looked in subtype table T591A and T591S, but couldn't find any subtype (even the standard ones like 0001,0002,0003 etc) for 1002 infotype.
Thanks,
Amit Jain

Hi Amitkumar Jain,
I am also facing same problem, i need create Infotyes with Subtypes in OM.Check below steps how i created
1. I create Structure in se11.    HRI9119
2. In PPCI , i create infotype 9119
3.In SM30 , I Maintain table T777i, here i selected my infotype (9119), then i clicked on infotype per object type and assign    subtype (9229, 9339) to the my infotype .
4.   After that, in same screen, i selected my infotype and assign TIME CONSTANT to my all subtype and infotypes.
After this , any think required to maintain , Plz tell me.. i didn't find my subtype in PP01.
Thanks and Regards ,
Venkatesh.M

How to create new INDEX for TREX

Hello Experts,
Iam new to this KM and TREX so need ur guidance for this...
I need to create an INDEX for TREX, so after going through various messages i found that it can be created form the Index Administration iView portal----System Administration -> Syetm Configuration -> Knowledge Management -> Index Administration -> New Index
But iam not getting the above path in SPRO OR how to run Index Administration iView OR from which portal i need to create an INDEX??can anyone provide steps on how to go to System Administration -> Syetm Configuration -> Knowledge Management -> Index Administration -> New Index
path.....
Regards.

I'm not very familiar with CRM business partners, but the common way - to include the repository where the documents are stored to the KM using [CM Repository managers|http://help.sap.com/saphelp_nw04/helpdata/en/e3/923227b24e11d5993800508b6b8b11/frameset.htm].
You need first to create a repository manager for you repository and only then you'll be able to create an index.
Regards, Mikhail.

How to create new user for OBIEE presentation service

Hello Guys
I now only have 2 users on my OBIEE, demo1, demo2.. Now I'd like to create a new user call A and make this new user able to log on to OBIEE presenation service..
So I went to the RPD admin tool and created new user there and gave password. It was done online mode and I checked out..
I am able to login to admin tool with the new user account, but when I go to presentation service, I am not able to see this new user nor would I be able to log on using the new user account..
So how does this work? If I wanted to create a new user and let it access dashboard, I'd I do it
Any pointer will be greatly appreciated
Thanks

Hi.
actually there is no option available in presentation service to create user. There you can just delete user and create and delete the groups.
Anyhow, you said you have created a user in rpd.
To see this user in answers, you must login into answers with this user once.
are you able to login with the newly created user?
(As you said you done the creation of user in online mode, this may not effect to the answers)
if not, just login with administrator into answers, click on reload server metadata, then log off from there.
Now, try to login with the new user. You may able to login.
OR
just restart your BI Server services.

How to create new version for material

Similar Messages

Maybe you are looking for