Create New Operations for data collection(View Object)
ADF data collection(View Object) supports Create, CreateInsert, Delete, etc operations.
And would like to add more operations like clear, etc. How do i create my own operation and add it to data control for all the view objects in the data control.
Thanks
JP
hi esjp2000
I'm not sure what kind or "clear operation" you are looking for, but I recently asked about a "clear search" in this forum thread:
" ADF BC : "clear search" using executeEmptyRowSet() "
ADF BC : "clear search" using executeEmptyRowSet()
It is about the executeEmptyRowSet() method, and that might not be what you are looking for. (It might not even be what I am looking for because it is undocumented and that is what my question is about and I haven't had an aswer yet.)
But ... it does provide an example of a "service method" Shay is referring to, in the example application:
http://verveja.footsteps.be/~verveja/files/oracle/ClearSearchStuff-v0.01.zip
(So, the specific service method implementation, "ScottServiceImpl.executeEmptyRowSetOnEmpWithParamsVOVI()" in the example, would be different in your case, depending on the specific "clear operation" you are looking for.)
success
Jan Vervecken
Similar Messages
-
Problem occured when create a tree table for master-detail view objects using SQL queries?
I am programming a tree table for master-detail view objects using SQL queries and these 2 view objects are not simple singel tables queries, and 2 complex SQL are prepared for master and view objects. see below:
1. Master View object (key attribute is SourceBlock and some varaible bindings are used for this view object.)
SELECT cntr_list.SOURCE_BLOCK,
sum(
case when cntr_list.cntr_size_q = '20'
then cntr_list.cntr_qty
else 0 end ) as cntr20 ,
sum(
case when cntr_list.cntr_size_q = '40'
then cntr_list.cntr_qty
else 0 end ) as cntr40 ,
sum(
case when cntr_list.cntr_size_q = '45'
then cntr_list.cntr_qty
else 0 end ) as cntr45
FROM (
SELECT yb1.BLOCK_M as SOURCE_BLOCK,
scn.CNTR_SIZE_Q,
count(scn.CNTR_SIZE_Q) AS cntr_qty
FROM SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2
WHERE
scm.cmr_n = scn.cmr_n
AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')
OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))
AND scm.shift_mode_c = :ShiftModeCode
AND scm.end_terminal_c = :TerminalCode
AND scm.start_terminal_c = yb1.terminal_c
AND scm.start_block_n = yb1.block_n
AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n
AND scm.end_terminal_c = yb2.terminal_c
AND scm.end_block_n = yb2.block_n
AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n
AND scn.status_c not in (1, 11)
AND scn.shift_type_c = 'V'
AND scn.source_c = 'S'
GROUP BY yb1.BLOCK_M, scn.CNTR_SIZE_Q
) cntr_list
GROUP BY cntr_list.SOURCE_BLOCK
2. Detail View object (key attributes are SourceBlock and EndBlock and same varaible bindings are used for this view object.)
SELECT cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK,
sum(
case when cntr_list.cntr_size_q = '20'
then cntr_list.cntr_qty
else 0 end ) as cntr20 ,
sum(
case when cntr_list.cntr_size_q = '40'
then cntr_list.cntr_qty
else 0 end ) as cntr40 ,
sum(
case when cntr_list.cntr_size_q = '45'
then cntr_list.cntr_qty
else 0 end ) as cntr45
FROM (
SELECT yb1.BLOCK_M as SOURCE_BLOCK,
yb2.BLOCK_M as END_BLOCK,
scn.CNTR_SIZE_Q,
count(scn.CNTR_SIZE_Q) AS cntr_qty
FROM SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2
WHERE
scm.cmr_n = scn.cmr_n
AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')
OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))
AND scm.shift_mode_c = :ShiftModeCode
AND scm.end_terminal_c = :TerminalCode
AND scm.start_terminal_c = yb1.terminal_c
AND scm.start_block_n = yb1.block_n
AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n
AND scm.end_terminal_c = yb2.terminal_c
AND scm.end_block_n = yb2.block_n
AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n
AND scn.status_c not in (1, 11)
AND scn.shift_type_c = 'V'
AND scn.source_c = 'S'
GROUP BY yb1.BLOCK_M, yb2.BLOCK_M, scn.CNTR_SIZE_Q
) cntr_list
GROUP BY cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK
3. I create a view link to create master-detail relationship for these 2 view objects.
masterview.SourceBlock (1)->detailview.SourceBlock (*).
4. I create a tree table using these 2 view objects with master-detail relationship.
When I set default value for variable bindings of these 2 view objects and the matching records exist, tree table can work well. I can expand the master row to display detail row in UI.
But I need to pass in dymamic parameter value for variable bindings of these 2 view objects, tree table cannnot work again. when I expand the master row and no detail row are displayed in UI.
I am sure that I pass in correct parameter value for master/detail view objects and matching records exist.
Managed Bean:
DCIteratorBinding dc = (DCIteratorBinding)evaluteEL("#{bindings.MasterView1Iterator}");
ViewObject vo = dc.getViewObject();
System.out.println("Before MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
System.out.println("Before MasterView1Iterator ShiftModeCode="+ vo.ensureVariableManager().getVariableValue("ShiftModeCode"));
vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
vo.executeQuery();
System.out.println("MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
DCIteratorBinding dc1 = (DCIteratorBinding)evaluteEL("#{bindings.DetailView1Iterator}");
ViewObject vo1 = dc1.getViewObject();
System.out.println("Before DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
System.out.println("Before DetailView1Iterator ShiftModeCode="+ vo1.ensureVariableManager().getVariableValue("ShiftModeCode"));
vo1.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
vo1.ensureVariableManager().setVariableValue("DateTo", dateTo);
vo1.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
vo1.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
vo1.executeQuery();
System.out.println("after DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
5. What's wrong in my implementation? I don't have no problem to implement such a tree table if using simple master-detail tables view object, but now I have to use such 2 view objects using complex SQL for my requirement and variable bindings are necessary for detail view object although I also think a bit strange by myself.Hi Frank,
Thank you and it can work.
public void setLowHighSalaryRangeForDetailEmployeesAccessorViewObject(Number lowSalary,
Number highSalary) {
Row r = getCurrentRow();
if (r != null) {
RowSet rs = (RowSet)r.getAttribute("EmpView");
if (rs != null) {
ViewObject accessorVO = rs.getViewObject();
accessorVO.setNamedWhereClauseParam("LowSalary", lowSalary);
accessorVO.setNamedWhereClauseParam("HighSalary", highSalary);
executeQuery();
but I have a quesiton in this way. in code snippet, it is first getting current row of current master VO to determine if update variables value of detail VO. in my case, current row is possibly null after executeQuery() of master VO and I have to change current row manually like below.
any idea?
DCIteratorBinding dc = (DCIteratorBinding)ADFUtil.evaluateEL("#{bindings.SSForecastSourceBlockView1Iterator}");
ViewObject vo = dc.getViewObject();
vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
vo.executeQuery();
vo.setCurrentRowAtRangeIndex(0);
((SSForecastSourceBlockViewImpl)vo).synchornizeAccessorVOVariableValues(); -
Error: Attribute set for field_name in view object VO_instance failed
While I try to add a new row in a table using a VO created on two EOs, it comes back with error message 'Attribute set for <field_name> in view object <VO_instance> failed' for each field I enter the data. Please suggest me if I am missing something while doing it.
Are you sure you are specifying a value for the attribute of the VO and the value of correct data type.
Also, please make sure that you have one row coming from each EO , so that the VO has one row, and a outer join is not happening.
Thanks
Tapash -
How to create new scope for SharePoint calendar?
How to create new scope for SharePoint calendar?
I have a calendar list to which I want to create following scopes-
Annual View
Half Year 1 (Jan-June)
Half Year 2 (Jul-Dec)
Quarter 1 (Jan-Mar)
Quarter 2 (Apr-Jun)
Quarter 3 (Jul-Sep)
Quarter 4 (Oct-Dec)
How this can be created. Any help appriciated. Thanks.Hi Pratima,
Can you please see below link and code snippet for how to
format date in gridview.
http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Gridvew Date format</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
<RowStyle BackColor="#EFF3FB" />
<FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
<HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<AlternatingRowStyle BackColor="White" />
<Columns>
<asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
<asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
<asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
<asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
<asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
</div>
</form>
</body>
</html>
Hope this will help you.
Regards
Soni K -
How-to synchronize edit forms for a single View Object tree node entrie
Hi all,
I created a tree from a single View Object,
follow this [http://www.oracle.com/technetwork/developer-tools/adf/learnmore/32-tree-table-from-single-vo-169174.pdf]
then i want to create and synchronize edit forms for tree node entries,
follow this [http://www.oracle.com/technetwork/developer-tools/adf/learnmore/50-synchromize-form-treeselection-169192.pdf]
but it not working when i click child node!!
i found the latter tree from many View Object ,but the former tree from single View Object.
what should i do?
Thanks in advanceHi,
say the tree is built from ViewObject1. In the AM model, create a second View Object instance for this. Say ViewObject2. Create the form from ViewObject2 and the tree from ViewObject1. When creating the tree, use the"Target Data Source" option at the bottom to reference the iterator of ViewObject2. Then create a PartialTrigger on the paneFormLayout that holds the synch form. In the partial trigger property, reference the tree so that when the tree selection changes, the form is updated. Then create a PartialTrigger property on the tree and point it to the submit button of the form so you can show updated values in the tree.
Frank -
How to populate data into view object
Hi all,
I am quite new with ViewObject.
I have one data table which is binding with view object.
I want to populate data into view object from my managed bean.
how can i achieve this kind of scenario?
actually i try to get view object as in the following. but i get only null.
ViewObject viewobject = DCIteratorBinding.getViewObject();
With Regards,
Wai PhyoHi,
You could use the following code snippet to get handle to view object from the iterator.
FacesContext fc = FacesContext.getCurrentInstance();
BindingContainer bindings =
(BindingContainer)fc.getApplication().evaluateExpressionGet(fc,
"#{bindings}",
BindingContainer.class);
DCBindingContainer bc = (DCBindingContainer)bindings;
DCIteratorBinding iterator =
bc.findIteratorBinding("<ITERATOR_ID>");
ViewObject viewObject = iterator.getViewObject();
// Perform operations on the view objectThanks,
Navaneeth -
How to create new structure for SOP?
How to create new structure for SOP? and transfer data for long term planning?
hi dear
For SOP there are two types
1. Standard SOP : this the standard SOP configured by SAP consider the Level by Level planning and planning done for product group .
2. Flexible planning SOP: this option is given, so that Rough planning/SOP planning can be done as per the client requirement.e.g planning structure can be sales orgn., distribution channel, division, plant, material
For configuring the flexible planning SOP follow steps
1. Define info structure in IMG
where u define the characteristic and Key field
2. Set parameters for info structures and key figures
Sales & Operations Planning >Master Data>Set parameters for info structures and key figures
where u define Planning method
Consistent planning
Level-by-level planning
Delta planning
and aggregation type
1. Average calculated
2. Total created
3. No aggregation
3. create Planning type with reference to info structure
Regards
Suresh -
New operation for production order - change operation quantity not possible
Hello all,
we want to create a new operation for a production order.
So we go to CO02 and to the operation order overview screen.
But when we add a new operation, the system will not let us determine the operation quantity for the new operation, the system will just take the quantity from the operation before.
How can I determine the qty by myself?
Thanks
AnneYou can do another way also. You change your routing with new operation quantity and save it in CA02. NOw you go to CO02 and read master data in funtions, then the new operation quantity will definetly come in to the production order.
KrishnamurtyDSS -
Error:Attribute set for DetailHideShow in view object SalaryDetailsVO faild
Hi
We need to add one column in the self service Manager > My Employee Information > Salary history table
- This column does not exist in the standard view Object
oracle.apps.per.selfservice.mgrviews.server.SalaryDetailsVO
- With Jdeveloper we have created a new view that extend the standard view :
cggv.oracle.apps.per.selfservice.mgrviews.server.CGGVSalaryDetailsVO
- We used the substitution tools to substitute the standard view by the new one
with the following column :
java oracle.jrad.tools.xml.importer.JPXImporter $CGG_MDS_TOP/cggv/per/12.0.0/java/ParodiExtendPJ.jpx -username apps -password
apps -dbconnection "(description = (address_list = (address = (community =
tcp.world)(proto = tcp)(host = doradb)(port =
1581)))(connect_data = (sid=LDEV )))"
- the new view contain exactly the same attribute than the standard one, we just add one new attribute at the end
- We used Self-service perzonalisation functionality to add the new column in the table region.
When we click on the Show buton the this error message appears :
Error : Attribute set for DetailHideShow in view object SalaryDetailsVO failed
It seems there is a probleme when extending ViewObject and adding column to table that contains a Show/Hide Detail column.
Do we need extend also the controler ?
Thank a lot for your help
Julien RobinetIs the new column you have added part of the show/hide detail? If not, is the correct getting displayed?
Is show/hide also handled through the attribute of substituted VO?
--Shiv -
ORA-39080: failed to create queues "" and "" for Data Pump job
When I am running datapump expdp I receive the following error:
+++Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc+++
+++tion+++
+++With the Partitioning, OLAP and Data Mining options+++
+++ORA-31626: job does not exist+++
+++ORA-31637: cannot create job SYS_EXPORT_SCHEMA_01 for user CHESHIRE_POLICE_LOCAL+++
+++ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95+++
+++ORA-06512: at "SYS.KUPV$FT_INT", line 600+++
+++ORA-39080: failed to create queues "" and "" for Data Pump job+++
+++ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95+++
+++ORA-06512: at "SYS.KUPC$QUE_INT", line 1555+++
+++ORA-01403: no data found+++
Sys has the following two objects as invalid at present after running catproc.sql and utlrp.sql and manual compilation:
OBJECT_NAME OBJECT_TYPE
AQ$_KUPC$DATAPUMP_QUETAB_E QUEUE
SCHEDULER$_JOBQ QUEUE
While I run catdpb.sql the datapump queue table does not create:
BEGIN
dbms_aqadm.create_queue_table(queue_table => 'SYS.KUPC$DATAPUMP_QUETAB', multiple_consumers => TRUE, queue_payload_type =>'SYS.KUPC$_MESSAGE', comment => 'DataPump Queue Table', compatible=>'8.1.3');
EXCEPTION
WHEN OTHERS THEN
IF SQLCODE = -24001 THEN NULL;
ELSE RAISE;
END IF;
END;
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 7Snehashish Ghosh wrote:
When I am running datapump expdp I receive the following error:
+++Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc+++
+++tion+++
+++With the Partitioning, OLAP and Data Mining options+++
+++ORA-31626: job does not exist+++
+++ORA-31637: cannot create job SYS_EXPORT_SCHEMA_01 for user CHESHIRE_POLICE_LOCAL+++
+++ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95+++
+++ORA-06512: at "SYS.KUPV$FT_INT", line 600+++
+++ORA-39080: failed to create queues "" and "" for Data Pump job+++
+++ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95+++
+++ORA-06512: at "SYS.KUPC$QUE_INT", line 1555+++
+++ORA-01403: no data found+++
Sys has the following two objects as invalid at present after running catproc.sql and utlrp.sql and manual compilation:
OBJECT_NAME OBJECT_TYPE
AQ$_KUPC$DATAPUMP_QUETAB_E QUEUE
SCHEDULER$_JOBQ QUEUE
While I run catdpb.sql the datapump queue table does not create:
BEGIN
dbms_aqadm.create_queue_table(queue_table => 'SYS.KUPC$DATAPUMP_QUETAB', multiple_consumers => TRUE, queue_payload_type =>'SYS.KUPC$_MESSAGE', comment => 'DataPump Queue Table', compatible=>'8.1.3');does it work better when specifying an Oracle version that is from this Century; newer than V8.1? -
How to create business operation for starting workflows
How to create business operation for starting workflows from worklist?
When I call methods that implements business operation from java class everything
works fine(wlpi-ejb.jar is required), but when I call business operation from
Studio I can't use classes from wlpi-ejb.jar.Business operation is called by WLIS. So, I include wlpi-ejb.jar into WLIS classpath.
Studio uses deployed EJB from wlpi-*.jar, I don't know why Studio doesn't see
methods from deployed EJBs when WLIS classpath contains wlpi-ejb.jar.
"Andrew Pitonyak" <[email protected]> wrote:
>
When studio starts, what is your classpath? If you use the included batch
file to start it, then your class path may not include this :-)
Andrew
"Raul" <[email protected]> wrote in message
news:[email protected]..
How to create business operation for starting workflows from worklist?
When I call methods that implements business operation from java classeverything
works fine(wlpi-ejb.jar is required), but when I call business operationfrom
Studio I can't use classes from wlpi-ejb.jar. -
Problem in creating new versions for existing DIR using CV01N
I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.BThere is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110. "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
+**EXPORTING**+
+**is_draw = ls_draw**+
+**TABLES**+
+**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B -
How to Create New Application for iPhone
Hi,
Can anyone guide me how to create New Applications for the iPhone.
Regards,
Mustafa Ali QizilbashIf you think Apple's is making a profit off the $99 it collects for the iPhone Developer Program membership, you're badly underestimating how much it costs to run the program.
-
New operation for reference operation set
Hi,
I want to create a new operation for an existing reference operation set. Is a function for that use available?
It would be optimal if there is a function that copy one operation and insert it the same reference operation set as an new operation.
Can anybody help me? That would be great.
Thanks
sylvieHi Naik
This is a big question.
You need tod quite a bit of QM reading.
Go through the Best business practices base line packages.
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
Best regards
Ramki -
Error message at the time create new Hierarchy for Cost Centers (OKEON)
Dear Experts,
we have create new company code with reference to old company code. at the time create new Hierarchy for Cost Center with t code OKEON system given the error message "Overlapping intervals or identical values have occurred".
we have already checked the duplicate entry but not found the same.
Please help.
Regards
BK GAIKWADthe long text to the message is:
Diagnosis
You want to use cost center together with activity type . For this combination, however, no master data record was created in fiscal year . The record is defined in CCA during activity type planning.
System Response
Procedure
1.Create the master data record.
Activity type planning
1.Or, check your entries.
I think you should discuss it with your functional consultant
Maybe you are looking for
-
What is the diffrence between "Key to Select" and "Selected Key" while creating Radio Buttons?
While creating radio buttons there is a confusion regarding two properties "Key to Select" and "Selected Key".Can anybody explain it with example? Thanks, Vimal
-
Need help with iPhoto! Can't add images!
Hello all. Just sarted using iPhoto '05 and amm trying to transfer photos from my camera and a CDR from a windows PC. It says: The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data).
-
Using column number inplace of column name in SQL Select statement
Is there a way to run sql select statements with column numbers in place of column names? Current SQL select AddressId,Name,City from AddressIs this possible select 1,2,5 from AddressThanks in Advance
-
Hi, I recently tried to update the instagram app as well as a few others. Every other app successfully updated except for instagram which has been stuck on waiting. I've tried everything but the app is still says waiting.. Any suggestions?
-
How do I feed a graph from database?
Hi all I have done in a few hours more that I would in many days since i'm trying Flex but now I'm feeling very lonely .. I'm having some charts and bar graphs in my project but i'm stuck Can someone give me a few tips ? I have a postgresql database