Create only access for notes on non-owner records

I am trying to set up the system to allow read access to an account (thats ok), but attached 'notes' are 'owner only' visible, and allowing account non-owners to create new notes. In this scenario the non-owners could read-only the account, see any notes they have added, and create more, but not see anyone elses notes. I can get this to work for activities ok, but not notes. Does anyone know a trick for this.

Yeah the private flag basically stops all non-owner access, as you would expect. In this case I want to still enable some non-owners access. Initially I thought using the private flag with the delegated user option would work around the problem (we only have a few users that want to share the notes), but private notes are not available even to delegated users.

Similar Messages

  • How to configure Mailbox Read-Only access for Mailbox's owner on Exchange Server 2010?

    I have to configure the Exchange Server 2010's mailbox to only grant Read-Only Access on the mailbox's owners.  So they can only allowed to read their messages and cannot modify or remove them.  Are there any references or methods to do?

    Hi,alexchy8
    We can make use of 2 PowerShell commands to achieve this goal.
    Add-MailboxPermission and Add-MailboxFolderPermission.
    Execute the Add-MailboxPermission command to delegate the read permission at mailbox level.
    Execute the Add-MailboxFolderPermission command to delegate the required permissions on specific folders inside the mailbox.
    You can read the following article as reference:
    http://www.exchangedictionary.com/articles/assign-read-only-mailbox-permission-on-exchange-2010-2013-powershell
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
    or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards.

  • Want to create a Read Only user for a given app owner user

    Hi Folks,
    We have an application owner schema, lets call it OWNER, which has different objects living under it.
    Now, for certain reasons, the app group wants a read only user which should be able to view objects living only in OWNER. It would only be able to read things, and have no create or alter types of priv to be able to change anything.
    The first idea was to create a new user (e.g. RO) and give this explicit grants (select only) for all objects in OWNER. Though this works, is a maintenance havoc, since everytime there is a new object in OWNER, you have to remember to give explicit grants to all RO (or RW ) kind of users.
    What i am looking forward to is, some sort of privilege or role concept that apply on the user level, and not on object level. something that allows me to say, all objects of this schema (e.g. OWNER) are visible to user RO. Other restrictions on RO would control read or write behaviour.
    Does this thing exist ? please point me to the documentation/example..
    regards
    raghav..

    CREATE OR REPLACE TRIGGER myTest.trg_mytest
    AFTER DDL
    ON myTest.SCHEMA
    DECLARE
         lv_obj_type VARCHAR2(20) := TRIM(UPPER(ora_dict_obj_type));
         lv_evt_type VARCHAR(20)      := TRIM(UPPER(ora_sysevent));
         lv_obj_name     VARCHAR2(30) := trim(UPPER(ora_dict_obj_name));
         lv_role_name     VARCHAR2(30) := 'myTest_RO';
         lv_stmt          VARCHAR2(4000) := NULL;
         ln_job_nr     NUMBER;
    BEGIN
         IF lv_evt_type != 'GRANT' --lv_obj_type <> 'OBJECT PRIVILEGE' --
         THEN
              DBMS_JOB.SUBMIT(ln_job_nr,'begin execute immediate ''grant ' || ' select on ' ||
                                       lv_obj_name || ' to ' || lv_role_name || '''; END;');
         END IF;
       INSERT INTO TB_EVT_LOG(d_date, description)
       VALUES(SYSDATE,  lv_obj_name || '~~~~ created ' || lv_obj_type || '~~~~' || lv_evt_type );
       EXCEPTION
         WHEN OTHERS THEN
           RAISE;
    END trg_mytest;
    /This works. But, my problem is that it is not able to filter out the Grant statement itself, Its logging an entry for the grant (as a ddl operation as well).
    what am I doing wrong here ?
    regards
    raghav..

  • How to create a read only access for database

    I am developer but willing to lear some of the dba tasks. I would like to know the steps that i need to take to creat a read only access database that is going to be used for the report development.
    I really appreciate if you tell me all the steps I need to create that. I have a full right to do this in the develpment database. thanks

    thank you for your reply but it does not tell me how i can set up a read only access acccount for the user. Do i need to create a role and assign the role to the users?

  • How to create a user with read only access for ESB / BPEL Console

    I need to create a user with read only access to ESB Console & BPEL Console. I have created a user
    (esbreadonly) and assigned ascontrol_monitor role but user is still able to
    delete services from ESB systems (such as DefaultSystem). Is there any way to
    create a user that has strickly read only access to ESB Console & BPEL
    Console
    Thanks
    Dinesh Patel

    Check out this post.. I'm in the process of testing.
    http://chintanblog.blogspot.com/2007/12/i-saw-numerous-people-asking-about-bpel_290.html

  • How to assign read only access for a database to a single user?

    Hi All,
    I have created a login for one of the user , and i used deny view to deny that user access to any of the databases to be shown.Now, he cannot see any databases in the explorer window.
    My question is now i want to give this user permission ( read-only) to a single database. How can i do that? I have googled around and found some solutions but nothing is working.
    Can someone please help me with any suggestions.
    Thanks a lot for your time and suggestions in advance.
    Thanks

    Hi Bhanu,
    Thanks for your reply, I am not sure i got it. I have a user created with the name of 'msam_test' and if i login into management studio with this userid and password i dont see any databases showing up because i used the DENY View command to hide which is
    working fine.Now i just want to see only 1 database named 'suresh3_test' with a read only access to this database.
    I tried using your code in the below way
    USE [suresh3_test]
    CREATE USER [<msam_test>] FOR LOGIN [<msam_test>] WITH DEFAULT_SCHEMA=[dbo]
     exec SP_ADDROLEMEMBER 'DB_DATAREADER','<msam_test>'
    But i receive an error saying
    Msg 15007, Level 16, State 1, Line 3
    '<msam_test>' is not a valid login or you do not have permission.
    Msg 15410, Level 11, State 1, Procedure sp_addrolemember, Line 75
    User or role '<msam_test>' does not exist in this database.
    Can you please help me on this.
    Thanks

  • Read only access for a Database!

    Hi All,
    I need to create a user for my database who can have readonly access to the database and can work as *"Read Only Apps".*
    Senario:-* I want to give access to development team through TOAD/ SQL* but that user can not delete/update any thing from apps schema.
    Thanks,
    Anchorage

    Anchorage,
    Please refer to the following link:
    Read Only Schema in Oracle APPS 11i
    http://oracle.anilpassi.com/read-only-schema-in-oracle-apps-11i.html
    You may also search this forum as the same topic was discussed here many times before.

  • How enable read only access for ACS server itself

    Hi,
    We would like to know whether its possible to create a read only access to the ACS server. Currenlty ACS server has a generic login with full admin rights.
    We need to create a login to couple of users to log into ACS to check the "Report and Activity" tab. Access to all other tabs should be disabled.
    We are using ACS4.0 verison. Please let me know whether its possible.
    Thanks
    Nachi

    Hi,alexchy8
    We can make use of 2 PowerShell commands to achieve this goal.
    Add-MailboxPermission and Add-MailboxFolderPermission.
    Execute the Add-MailboxPermission command to delegate the read permission at mailbox level.
    Execute the Add-MailboxFolderPermission command to delegate the required permissions on specific folders inside the mailbox.
    You can read the following article as reference:
    http://www.exchangedictionary.com/articles/assign-read-only-mailbox-permission-on-exchange-2010-2013-powershell
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
    or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards.

  • Read only access for objects in application designer

    I want to apply read only access to all the objects in application designer. I would like to know how we can do this.
    Jayaprakash Tedla

    Jayaprakash,
    On 8.48 :
    1. Create a PERMISSION LIST
    1.1 leave empty the navigator homepage
    1.2 leave unchecked Can Start Application Server? and Allow Password to be Emailed?
    1.3 On Pages tab, leave it empty
    1.4 On PeopleTools tab, check Application Designer Access, then click on Definition Permissions, Tools Permissions Miscellaneous and Permissions, and put there the rights as well as you want. You can put Read Only on all component in one shot by clicking on the button, or one by one by choosing in the listbox for each type of components.
    1.5 leave all other tab blank
    2. Create a ROLE, and add the permission list created on step 1.
    3. Create the user, and give the role created on step 2.
    4. Open Application Designer, connect there with the new user, and enjoy on read-only access.
    Hope this help,
    Nicolas.

  • Read only access for bpel console in SOA Suite 10.1.3.5.1(weblogic)

    Hi
    For SOA Suite 10.1.3.5.1 on weblogic, Is there any way to restrict certain users to some pages in bpel console.. e.g. read only access to bpel console.
    I have found articles on web regarding this but they all are for SOA Suite 10.1.3.3 (and 3.4) on Oracle app server. Article provides a hack by using servlet filters.
    How to do a similar thing in SOA Suite 10.1.3.5.1 on weblogic ?
    Can somebody provide step by step instructions?
    Thanks

    Hi James,
    I have already seen this link and several refined versions of it but it wont work for weblogic. For example
    There is no j2ee/oc4j_soa/applications/orabpel/console directory (i looked into home directory as well but could not found orabpel/console dir).
    So question is where to put filter class and how to make changes in web.xml as this file is not present in j2ee/oc4j_soa/applications/orabpel/console/WEB-INF/
    I checked deployments in weblogic admin console and seems BPELConsole is deployed as a module under BPELPM ear.
    Any idea?
    Thanks.

  • Only VBA does not recognize non-English characters

    Hello guys,
    I have a new laptop with Windows 8.1 bought in the USA and I'm having a difficulties with Excel VBA (Office 365 University-64x bought in the Czech Republic - Central Europe). The VBA does not recognize non-English characters (particularly "ř" and
    "ů") which causes me problem when running some codes that I wrote earlier on my previous laptop (Windows 7, bought in the Czech Republic with the same Office). 
    The problem with non-English characters has occurred only in VBA so far, otherwise I can use these characters normally in Excel cells, Word... I tried to install both English and Czech version of the Office with no change, I also installed Czech proofreading
    tools and set everything to Czech in the Office. The location and language preferences in the Windows are also set up to Czech. And it is not a problem of a font. I also mentioned that when I tried to look up these characters, using Ctrl+F, it changes
    original ř to r after a search and again this is only an issue of the VBA.   
    Thank you very much for any help.
    Tom

    Hi Tom,
    VBA for Excel can only recognize ASCII code from 0 to 255, if you use other special characters like "ř" or "ů", it will returns 63(?) to you. To use this kind of characters, you have to utilize ChrW function to parse a decemal to the
    character.
    http://msdn.microsoft.com/en-us/library/ee177465.aspx
    for example, the hex code and dec code for these two characters are as below:
      Hex   Dec
    ř 159   345
    ů 016F  367
    So to get these two characters in VBA, you could code as below:
    ChrW(&H159) or ChrW(345)
    ChrW(&H16F) or ChrW(367)
    You can get the hex code of the character by searching in the system character map(in the Win8.1 start view, search "character map"), then convert the hex code to decimal code by yourself.
    Range("A1").Value = ChrW(&H159) & ChrW(&H16F)
    Range("A1").Value = ChrW(345) & ChrW(367)
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • IPTC Date Created only imports for October

    I'm creating JPEGS with only IPTC and EXIF data in and the field 2:55 Date Created only seems to appear in the File Info / Origin / Date Created in CS4 if the date is set to october??
    Manually editing the jpeg file, for example 20081007 works but 20080907 fails, even if I change the remaining EXIF and IPTC date fields to match
    I dont suppose anyone has any ideas as this is driving me nuts!
    Thanks
    Derek

    No, that changes the Date on the EXIF panel, in my case the date the scans were made. I want that date to stand and the IPTC Date Created date changed.
    Probably doesn't matter anyway, since I have just discovered that changes I make in Aperture IPTC metadata cannot be written to the master copy. At least not for TIFF files. Strangely, it does seem to work for jpgs.
    Too bad. I liked some Aperture features.

  • XCM(Extended Configuration Management) Read Only Access for Webshop

    Hi,
    We dont hav e XCM admin access in our project.We need to have just the view(read only) access.This will help us immensly during any troubleshooting. Plus we will save a lot of time while troubleshooting if the view access is avaialable to us. In case of any issues in the XCM setting, we can easily pin point the issue and ask the ERP team to change it. In absence of it we can only speculate what could have gone wrong on the XCM side. Is there any role in XCM so that we can get just read only access.
    Regards

    Hi,
    The below note will help you.
    Note 1014383 - Read only user in the XCM and Administration area of ISA
    Regards,
    Shanto Aloor

  • Hello,i have changed the access of library and system files in macintosh HD through get info option.i changed the access to write only access for library and system files to no access for everyone.then mac stopped working..nothing opening now.

    hello
    i have changed the access of library to WRITE ONLY and also i changed the access of system files to NO ACCESS FOR ANYONE in macintosh HD.then,suddenly it stopped working.i tried it shut down.then it didnot shut down.then i pressed ctrl+command+power button.then it was shut down.
    NOW, nothing is opening in macbook pro.it is opening and only apple logo is shown.what should i do now.i knew nothing in mac.please help me.operating system is 10.7

    hello CT,
    it showed
    permissions differ on library: should be drwxr-xr-r
    repaired "library"
    permissions differ on system: sholud be should be drwxr-xr-r;they are d-wx-----------
    repaired "systems"
    like this many steps occured.
    then next step is permissions repair complete.

  • What product do u recommend for creating a newsletter for a small non-profit community association?

    I just signed up for this forum. I´m thinking of creating a newsletter in Swedish for a small non-profit association in Sweden. Since everyone can download Adobe reader for free I´m thinking of using Adobe for the newsletter. Is there a light version available for non-profit assocaiations?

    Acrobat can't be used to create the newsletter from scratch. For that you
    need to use some word processing or layout application, like Word or
    InDesign. Acrobat then comes into the picture when you want to convert the
    original file format to the universally-used PDF format. If your needs are
    basic, you can use Acrobat Standard, which is a cheaper version (with less
    features, of course) of Acrobat Pro, but is totally capable of creating PDF
    files from those formats I mentioned before.

Maybe you are looking for

  • Copying a table from one databse to another

    Hi, I used the following code to copy a table from one database to another. set copycommit 1 set arraysize 1000 copy from username/passwd@tnsname - create <tablename> - using - select * from <tablename> But I get the following error: set copycommit 1

  • Issue with Excel add in

    Hi Experts, Some of the users receive the following error message while attempting to retrieve data on a previously-working query in essbase excel add in: "Essbase has encountered an internal Excel error. Your sheet will not be overwritten and none o

  • Bluetooth headset disconnects wireless Mighty Mouse

    I have a Jabra bluetooth pair of headphones (BT620S) that I use with my Intel iMac. They work great as headphones since they are connecting via A2DP. But they also have the option of being used as a headset, for example with softphones or similar. On

  • IOS beta 2 expired phone tells me to connect it to itunes

    Hi im a developer and I have ios 6 beta 2 on my 3gs. Unfortunatley I didnt have time or Internet to update it to 6.0; This morning I wake up and the phone is locked! Tells me to connect it to iTuens. or connect to a wifi hotspot. My wifi doesnt work

  • Why should we queue?

    Hello Architects and Software enginners, I think things that may be needed in a specific scenario, may not be crucial in another scenario, in other words I don't believe a common solution exists for all situations. So here is my scenario and my quest